NEOLAB CONVERGENCE NWP-F70 Pen+ Jibe User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3568907
Application ID	OdG19rVNBfO+L5NqiJX2lQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	118.44kB (1480493 bits)
Date Submitted	2017-09-19 00:00:00
Date Available	2017-09-19 00:00:00
Creation Date	2017-07-28 15:08:19
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-09-18 19:56:01
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Macintosh)

1. How to use Neo smartpen
2. Neo Notes App
(1) Charging the pen
•
Make sure to charge the product after the purchase as it may have low battery.
•
The LED lamp will turn red while the battery is being charged. Once charging is complete,
it’ll change back to green.
Neo Notes
•
•
•
(2) Power ON/OFF
•
If you press the power button or put the pen tip on the paper, the pen will be activated
with LED lights on within a second.(The Auto Power function is enabled when the pen is first
connected to the App. You can change the setting in the App.)
•
When the power is on, hold the power button for more than 2 seconds, and the power
will turn off with flashing LED lights.
•
If there is no action taken for more than 20 minutes, the power will be turned off automatically.
Smartpen works in tandem with mobile app “Neo Notes”
The app can be downloaded from Google play or Applie app store.
Please search for ‘Neo Notes’, ‘Neo smartpen’ in the search bar to find the App
3. Registering Smartpen to mobile app
STEP 01.
STEP 02.
STEP 03.
STEP 04.
(You can change the auto-power-off time in the setting. The longer auto-power-off time is set,
the shorter pen usage time is available.)
•
If you do not use this product for more than 10 seconds, it will automatically change to
standby (low power consumption) mode to reduce battery power consumption.
(3) How to grip
The recognition rate is heavily affected by the direction of the optical sensor’s angle.
Sensor(oval shaped part adjacent to the pen tip) should face downwards. Deviating
from the appropriate degree, or holding the pen in the wrong direction could cause
difficulties with capturing your writing or drawing.
STEP 01.
Enable the Bluetooth function of the smart device.
STEP 02.
Run Neo Notes and tap the ‘Pen Register Now’ button below.
STEP 03.
Please follow the instructions as shown in the app.
STEP 04.
If the pen has been successfully registered, the Pen Registration screen
appears in the App. Now, press ‘Start Neo Notes’ button and start
writing on N notebooks.
4. Using without app connection
Usage Angle
Hold the pen that does not cause
pressure on the wrist and maintain a
natural writing angle.
Allowable Recognition Angle
Product’s acceptable recognition
angle is -20° ~ +40°.
(90° vertical standard)
Status
later when the app and Neo smartpen are connected
(1) NoteBox • Use notebook “Lock” function if you want to use the same type
LED Color
Power ON
illuminating
Power OFF
Being charged
(1)
Dimming
of notebooks for multiple times.
STEP 01.
STEP 02.
STEP 03.
illuminating
Fully charged
illuminating and thenturned OFF
Low battery power notification
Flashing
During USB connection
illuminated
Bluetooth connection standby
Flashing
(1)
During App connection
Dimming
Low storage notification
Flashing
During firmware update
(1)
Firmware update failure
Flashing
Dimming
(2)
Verify optical sensor or usage environment
Copyright©2017 NeoLAB Convergence Inc.
• The content that you write while the mobile app is off will be transferred
5. How to use Neo Notes
(4) LED color status display
(1)
• Neo smartpen can be used when the mobile app is not running.
illuminated (with alarms)
Dimming : Indicates slowly getting dark and then bright while flashing.
(2)
Check if there’s any dirt around optical sensor or on papers.
STEP 01.
Place long tap on the notebook that you wish to lock,
then ‘Share’,’Lock’ & ‘Delete’ button will appear
STEP 02.
Select ‘Lock’ button to move your notebook to NoteBox
STEP 03.
You can unlock the notebooks anytime.
(2) Using
•
Press
(4) Color & Thickness change
button
button on your note page to see.
•
You have various pen colors and thickness settings to choose from in the app.
Transcribe
•
Tap on
icon, then a color palette will open
and select a thickness and color
(while the smartpen is connected to the app)
•
Tap anywhere outside the palette to make it
disappear.
Transcribe your handwritten notes into digital text
Tag
Tag your notes to organiza and search them
Recording
Record voice while writing notes
Replay
Replay your written notes and/with voice
Share
Share the notes in PNG,PDF, TEXT & SVG format
Edit Mode
Edit,erase,change color/thickness or highlight
your writing in the notebooks
6. Notebooks & Stores
Find the perfect fit for among our wide range of notebooks.
(3) Pen preference settings
•
Press
World
button to see pen setting menu.
shop.neosmartpen.com(except Latin America and Africa)
* Pentips are D1 type which you can buy from any online or stationery store
Notebooks
Check your current notebooks
Notebox
Check Your locked notebooks to NoteBox
Activities
Check your writing by date
Product specification table
Model Name
NWP-F70
Support
Supported OS / Bluetooth Specification
OS version
Bluetooth version
Android
Kitkat 4.4 or higher
2.1 or higher
iOS
iOS 8.1 or higher[iPod 5th generation,
iPhone 5, iPad 3rd generation]
4.0 LE
Tags
Search tagged pages
Wireless Connection
Note Search
Search transcribed text
Settings
Select your pen & app settings
News & Tips
Check latest news & updated tips
Pen Data Sync
Transfer stored writing data to the app
Firmware Update
Update pen’s firmware to the latest version
R1: Any dangerous activities with
the pen tip are prohibited.
Bluetooth 4.2 (CLASSIC / BLE)
Receiving / Transmitting Frequency
2402 ~ 2480MHz
Antenna Output
Class 2
Storage Media
90MB of internal memory
Battery
Rechargeable Lithium Polymer Battery 3.7V / 280mAh
Charging Time
About 2 hours
Rated Input
DC 5V / 300mA
Usage Time
125 days in standby mode, 5 hours for continuous writing
Size and Weight
Length: 156mm (without a pen cap),
thickness: 12mm / 18.8g (without a pen cap)
Usage Environment
Temperature: 10~35℃ / humidity: ~95%
Ink refills
D1 multi pen ink refills
USB2.0HS (microUSB)
* Direct sunshine or any strong light may cause the loss of recognition of writing.
Product Marketing Name(PMN): Neo smartpen
Firmware Version Id Number(FVIN): REV. 1.0
R2: Stop the usage when the
product gets heated.
R5: Do not store the product
after the usage where room
temperature is possibly high,
such as interior of vehicle.
R7: Ink or any dirt in the product
may cause illness in case
of putting it one’s mouth
during usage.
PRODUCT WARRANTY
Please contact the store where you purchased the product or
NeoLAB Convergence for customer service/support.
Neo smartpen provides guaranteed warranty in accordance with relevant laws of the specified country
Product Warranty
Product Name
Pen+ Jibe
Product No. (Serial No.)
Purchase Date
Seller
Purchase Price
·Keep the product no. (serial no.) in a safe place as it is required for checking the product warranty period
when requesting customer service / support.
· The product no. is attached on the surface of the product package.
PRODUCT
WARRANTY
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
·C
 onnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE : FCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
NOTE : THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)THIS
DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
IC Information to User
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
제품 보증서
의 품질 보증 기간은 1년이며,
부품 보유 기간은 2년 입니다.
제품 보증서
제품명
제품번호(Serial No.)
구입일자
구입처
구입가격
· 품목별 소비자 피해 보상규정에 따라 아래와 같이 제품에 대한 보증을 시행합니다.
· 보상 여부 및 내용 통보는 요구일로부터 7일 이내, 피해 보상은 통보일로부터 14일 이내에 해결해 드립니다.
· 제품 번호(Serial No.)는 A/S 신청 시 제품 보증기간을 확인하기 위해 꼭 필요한 항목이니 분실되지 않도록 주의해 주세요.
· 제품 번호(Serial No.)는 제품의 제품 포장물 겉면에 부착되어 있습니다.
PRODUCT WARRANTY_43

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:07:28 15:08:19+09:00
Creator                         : Adobe InDesign CS6 (Macintosh)
Modify Date                     : 2017:09:18 19:56:01+09:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2017:09:18 19:56:01+09:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:e901db4f-f402-43ac-bc80-f726f3ddbd42
Original Document ID            : xmp.did:FE32FD3E91E8E411BC44E2E1FE9A12EA
Document ID                     : xmp.id:080C883C14206811822ACC506DB284F7
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:070C883C14206811822ACC506DB284F7
Derived From Document ID        : xmp.did:C7F5ADE407206811822ACC506DB284F7
Derived From Original Document ID: xmp.did:FE32FD3E91E8E411BC44E2E1FE9A12EA
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2017:07:28 15:08:19+09:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 3

EXIF Metadata provided by EXIF.tools