NEOSEN ENERGY NEO-033 Ventev Wireless Chargers User Manual ventev miniPro window instruction card V2
NEOSEN ENERGY Ventev Wireless Chargers ventev miniPro window instruction card V2
15_594000 UserMan
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3457101 |
| Application ID | sqc3ggn3WFUywnE/CWTsIA== |
| Document Description | 15_594000 UserMan |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 226.93kB (2836620 bits) |
| Date Submitted | 2017-07-10 00:00:00 |
| Date Available | 2017-07-10 00:00:00 |
| Creation Date | 2016-04-26 11:03:11 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2017-02-08 15:36:28 |
| Document Title | ventev miniPro window instruction card V2 |
| Document Creator | Adobe Illustrator CC 2015 (Macintosh) |
minipro window installation instructions attach mount to minipro: use the tightening ring to create a firm fit adjustable latch: spring loaded latch fits devices from 2.125” (54mm) to 3.875” (98 mm) wide insert phone insert phone by pushing latches outwards 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M DISCLAIMER: The sticky suction mount is only recommended for hard, flat surfaces. A semi-permanent or permanent indentation may occur if used on surfaces made of soft leather, vinyl, or similar materials. Ventev is not responsible for any damages caused to your dashboard due to the installation or use of the sticky suction mount. Do not install any mount or holder over an airbag cover or within the airbag deployment zone. minipro window instrucciones de instalación | instructions d'installation conecte el soporte al minipro: | fixer le support à minipro: apriete al anillo para reforzar el ajuste: | utiliser la bague de serrage pour un ajustement ferme window mount miniball (soporte adhesivo | support adhésif) pestillo ajustable: loquet ajustable: el pestillo tiene resorte adjustable a tamaño 2.125” (54mm) hasta 3.875” (98 mm) de ancho le loquet à ressort est compatible avec des appareils d'une largeur de 2,125" (54mm) à 3,875" (98 mm) inserte el teléfono insérer le téléphone Inserte el teléfono en el minipro empujando los brazos hacia afuera insérer le téléphone en ouvrant le loquets 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M 3M AVISO: El soporte succión pegajosa solamente se recomienda para uso con superficies plana y dura. Una abolladura podra ocurrir si la superficial esta hecha de piel, vinilo o materiaesl simiar. Ventev no es responsable por daño causado al la supericies del vehículo por uso del soporte succión pegajosa. No instale soportes cerca or encima de bolsas de aire o zona de despliegue. AVERTISSEMENT : Le support à fixation par succion est recommandé uniquement sur des surfaces dures et plates. Peut laisser une marque semi-permanente ou permanente si utilisé sur des surfaces en cuir souple, vinyle ou matériaux similaires. Ventev n'est pas responsable des dommages causés à votre tableau de bord en raison de l'installation ou de l'utilisation du support à fixation par succion. Ne pas installer de support ou fixation de téléphone sur le couvercle du coussin gonflable ou dans la zone de déploiement du coussin gonflable. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Format : application/pdf Title : ventev miniPro window instruction card V2 Metadata Date : 2017:02:08 15:36:28+08:00 Modify Date : 2017:02:08 15:36:28+08:00 Create Date : 2016:04:26 11:03:11-06:00 Creator Tool : Adobe Illustrator CC 2015 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 100 Thumbnail Format : JPEG Thumbnail Image : (Binary data 12071 bytes, use -b option to extract) Instance ID : uuid:51503b87-6567-4cf2-be23-c26a6b7ecbff Document ID : xmp.did:01b5c51c-9f98-432c-90c5-138a8878bdc5 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:ef121765-ecb6-5b4f-94e6-0c68f908bc76 Derived From Document ID : xmp.did:eb425b43-3bf4-484a-bbf5-87801210804a Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:7BC3775445216811822AB63C8EC354DA, xmp.iid:01b5c51c-9f98-432c-90c5-138a8878bdc5 History When : 2014:01:28 17:25:37-07:00, 2016:04:26 11:03:06-06:00 History Software Agent : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CC 2015 (Macintosh) History Changed : /, / Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 3.750000 Max Page Size H : 3.250000 Max Page Size Unit : Inches Font Name : Helvetica-Bold, CorisandeBold, CorisandeRegular Font Family : Helvetica, CorisandeBold, CorisandeRegular Font Face : Bold, Regular, Regular Font Type : TrueType, TrueType, TrueType Font Version : 10.0d4e1, Macromedia Fontographer 4.1.5 8/18/03, Macromedia Fontographer 4.1.5 8/18/03 Font Composite : False, False, False Font File Name : Helvetica.dfont, corisande_bd.ttf, corisande_rg.ttf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 1655 C, PANTONE 425 C, iBOLT Orange, rich black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants L : 60.000000 Swatch Groups Colorants A : 67 Swatch Groups Colorants B : 72 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Adobe PDF library 15.00 Page Count : 3 Creator : Adobe Illustrator CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools