NETGEAR GSS116E ProSAFE Plus 8 Port Gigabit Switch GS108Ev3 Installation Guide User Manual To The 3449aa86 2be2 4ada Bd71 C6a5d27a5c12
User Manual: NETGEAR GSS116E to the manual
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Installation Mount the Switch Cable Devices and Connect to Power Server Computer Wall mount Internet Note: Peel the plastic cover off of the adhesive squares on the rear of the backplate to help hold the backplate in place when mounting the switch to a wall.. ProSAFE 8-Port and 16-Port Gigabit Click Switch 3 GSS108E GSS116E 3 1 Optional modem OR GSS108E Optional router Hardware Overview 2 2 Check the Status Note: You must screw the backplate into a wall stud when wall mounting the switch. Table leg mount Notch Port LEDs 3 Notch 3 1 OR Hook Locking tab Power LED 1000 Mbps link (left LED) On 10/100 Mbps link (right LED) Off 1000 Mbps activity (left LED blinking) 10/100 Mbps activity (right LED blinking) 2 2 No link (off) Set Up the Switch Configuration Utility ProSAFE Click switches are plug and play and offer the same features as ProSAFE Plus switches. You can install a configuration utility to select additional options to manage and customize the switch for your network. This utility is on the resource CD that was shipped with the switch. Specifications Support Specification GSS108E GSS116E Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T Network cable Category 5e (Cat 5e) or better Ethernet cable Category 5e (Cat 5e) or better Ethernet cable 1. Insert the resource CD into a computer that is connected to the switch. 2. Click the Install ProSAFE Plus Utility link and follow the prompts to install the program. The switch configuration utility is installed in the program directory of your computer and a ProSAFE Plus Utility icon is placed on your desktop. ¾¾ To configure the switch: Ethernet ports 8 16 1. Double-click the ProSAFE Plus Utility icon. The configuration home screen displays a list of Plus switches that it discovers on the local network. Note: The configuration utility is installed on your computer and is supported only on Windows. ¾¾ To install the configuration utility: 2. Select the switch that you want to configure. You are asked to enter the password for the switch. 3. Enter the switch’s password in the password field. The switch’s default password is password. 4. Use the utility to configure the switch. For a description of Plus features, see the ProSAFE Plus Switch Configuration Utility User Guide. You can access the user guide through links on the Help tab of the utility or on the resource CD. Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com. USB ports 2 (provides power only) - USB power 10W maximum per port 15W maximum total - NETGEAR recommends that you use only the official NETGEAR support resources. Power 100–240 VAC 50/60Hz, 1.0A maximum 100–240 VAC 50/60Hz, 0.5A maximum For the current EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/. Power consumption 20.14W maximum 8.36W maximum Weight 0.43 kg (0.94 lb) 1.3 kg (2.64 lb) Dimensions (W x D x H) 305 mm x 65 mm x 36 mm 407 mm x 70 mm x 36 mm 12 in. x 2.54 in. x 1.39 in. 16.02 in. x 2.7 in. x 1.39 in Operating temperature 0–40°C (32–104°F) 0–40°C (32–104°F) Operating humidity 0%–90% relative humidity, noncondensing 0%–90% relative humidity, noncondensing Electromagnetic compliance CE Class B, FCC Class B, VCCI Class B, RCM Class B CE Class B, FCC Class B, VCCI Class B, RCM Class B Safety agency approvals CE mark, CB CE mark, CB For regulatory compliance information, visit http://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. Note: You can also access and configure the switch directly through its webbased user interface by entering the switch’s IP address in the address bar of a browser. If a DHCP server is not installed in your network, the default IP address is 192.168.0.239. November 2014 NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Title : ProSAFE Plus 8-Port Gigabit Switch GS108Ev3 Installation Guide Creator : NETGEAR Description : ProSAFE Plus 8-Port Gigabit Switch GS108Ev3 Installation Guide Subject : ProSAFE Plus 8-Port Gigabit Switch GS108Ev3 Installation Guide Create Date : 2014:11:06 16:59:20-08:00 Metadata Date : 2014:11:06 16:59:22-08:00 Modify Date : 2014:11:06 16:59:22-08:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:1abc204a-5d72-4716-aab7-ce8dfbc95587 Original Document ID : xmp.did:3B18FFCDA68EE3118389E3E3D5749344 Document ID : xmp.id:805B80AD1666E4118603F549900C15B1 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:7F5B80AD1666E4118603F549900C15B1 Derived From Document ID : xmp.did:966F9B773A53E411A10EF2F59AFAB3C2 Derived From Original Document ID: xmp.did:3B18FFCDA68EE3118389E3E3D5749344 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:11:06 16:59:20-08:00 Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 2 Author : NETGEAREXIF Metadata provided by EXIF.tools