NETIS SYSTEMS WF2520R 300Mbps Wireless N High Power Ceiling-Mounted Access Point User Manual 1

NETIS SYSTEMS CO., LTD. 300Mbps Wireless N High Power Ceiling-Mounted Access Point 1

User Manual

netis Wireless High Power Ceiling/Wall Mounted Outdoor AP RouterQuick Installation GuideRModel No. WF2520P WF2520
1.Package ContentsPlease make sure that the package contains above items, if any of the listed items are damaged or missing, please contact your distributor.Ceiling/wall MountedAP Routernetis Wireless High Power Outdoor AP RouterQuick Installation Guidenetis Wireless High Power Ceiling/Wall mounted AP Router Quick Installation Guide12.Hardware ConnectionThe following items should be found in your package:PoE Injectorfor WF2520P only Power Adapter Quick Installation Guide Ceiling Mounting Kit Wall mounting Kit (for W F2520 P on ly)* This QIG is for all netis Wireless High Power AP Router, including modelsCeiling/Wall mounted as belowWF2520P: This device supports both Passive PoE and regular Power adapter(DC24V/0.5A). You may use either one as power source.WF2520:This device only supports IEEE802.3af/at PoE.* Top Cover of Product* LED Indicator* I/O of Bottom CoverLEDSYSTEMWLANColorRedBlueModeSolid RedOffFast BlinkingSlow BlinkingSolid BlueBlinkingStatusPower ON and system is bootingAfter system boot finishedWhen firmware is upgradingWiFi disabledAfter system boot finished and no wireless date is being transmittedThere is wireless date being transmittedThere is no ''DC-IN' on WF2520
22) WF2520P(Power source:DC-IN)A) Connect the power adapter to DC-IN port of the device and plug the other end to wall outlet;B) Connect the Ethernet cable into WAN/PoE port of the device and the other end to the Ethernet port of PC.ComputerWF2520Pnetis Wireless High Power Ceiling/Wall mounted AP Router Quick Installation GuideLAN/WANLAN/WAN1)WF2520P (Power source:PoE)A) Connect one end of the Ethernet cable into the WAN/PoE port of the device and the other end to the PoE port of the PoE injector.B) Connect the Power Adapter to DC-in port of the PoE injector and plug the other end to wall outlet.C) Connect the Ethernet cable into LAN/WAN port of PoE injector and the other end to the Ethernet port of the PC.PC
33) WF2520 (Power source:PoE switch)A) Connect one end of the Ethernet cable into the WAN/PoE port of the device and the other end to the Ethernet port of PoE switch.B) Connect one end of the Ethernet cable into an Ethernet port of the PoE switch and the other end to the Ethernet port of PC.netis Wireless High Power Ceiling/Wall mounted AP Router Quick Installation GuideWF2520PoE switch 3. Configure the AP Router via Web Management PageThis device works in AP mode by default, so if you are intend to change the working mode or any settings, please connect your computer to WAN/PoE or LAN Port of AP and set a static IP for you computer as below steps: 3.1 Set a Static IP for PCManually set the IP address of the wired network adapter on your computer as below.IP Address/ IPv4 Address: 192.168.1.x (1<x<255)Subnet Mask: 255.255.255.0Default Gateway/ Router: 192.168.1.1For Windows 8/ 7/Vista1) Go to “Settings” (for Windows 8)/“Start” (for Windows 7/Vista) > “Control Panel”. 2) Left-click on “Network and Internet” > “Network and Sharing Center” > “Change adapter settings” (for Windows 8/ 7)/”Manage network connections” (for Windows Vista). 3) Right-click on “Local Area Connection” and left-click on “Properties”. 4) Double-click on “Internet Protocol Version 4 (TCP/IPv4)”. 5) Select “Use the following IP address” then left-click on “OK”.For Windows XP/20001) Go to “Start” > “Control Panel”. 2) Left-click on “Network and Internet Connections” > “Network Connections”. 3) Right-click on “Local Area Connection” and left-click on “Properties”. 4) Double-click on “Internet Protocol (TCP/IP)”. 5) Select “Use the following IP address” then left-click on “OK”.For MAC OS1) Click on the “Apple” menu > “System Preferences”. 2) Click on the “Network” icon. 3) Click on “Ethernet” in the left side box and click on “Advanced” in the lower right corner.4) In the top options, select “TCP/IP”.5) In the pull-down menu next to “Configure IPv4” select “Manually”. 6) Fill in the “IPv4 Address/Subnet Mask/Router” parameters, and click “OK” then “Apply”.
netis Wireless High Power Ceiling/Wall mounted AP Router Quick Installation Guide43.3 A dialog box will prompt as below, please enter User Name and Password, both default values are guest and click OK.Note: The configuration includes “Internet Connection” and “Wireless Setup”, if you choose “AP”,please go to Wireless Setup.AP Router Mode:Select the correct Connection Type.PPPoE Select “PPPoE” when：1. The device is connected to a DSL or Cable pure modem. 2. Got username &password from ISP.3. Broadband connection is needed on PC when bypassing This device. Type in the Username & Password provided by the ISP.DHCP Select “DHCP” when:1. The device is connected to a Cable/DSL modem router.2. Internet works directly on PC when bypassing this Device. (Dynamic IP)Static IP Select “ Static IP ” when: 1. Got IP Address, Subnet Mask, Default Gateway, DNS Server from ISP.Type in all the IP Info.3.2 Open your browser and type http://192.168.1.1 in the address field to visit router's web management page.
5netis Wireless High Power Ceiling/Wall mounted AP Router Quick Installation GuideWISP Mode :Select target network and Connection Type. 1. Click “AP Scan” button to select your target network and click “Connect” button.2. Type in the wireless security info of the target network. 3. Select connection type. (Please refer to “Internet Settings” →“AP Router Mode”)Note: The DHCP Server will be disabled after switching to “AP” mode successfully, so you will have to set a static IP address for your PC first if you need to login to the web-based management page again. 3.4 The web management page will display after login successfully. Select the language as you need on the top box, default is in English.Wireless SetupSetup a wireless network name in “SSID” box, it is recommended to use WPA-PSK/WPA2-PSK for “Security” and set a wireless network key in the “Password” box, then click “Save” button.3.5 When you completed the configuration,please remember to change the settings on your computer back to 'obtain an IP address automatically' in the the same window as step 3.1.
6netis Wireless High Power Ceiling/Wall mounted AP Router Quick Installation Guide4.Mounting the deviceThis device can be ceiling mounted or wall mounted according to your setup.1. Ceiling MountedAttention: For ceiling mounted, we would suggest,(1) The thickness of ceiling must be over 17mm(2) The Weight-bearing of ceiling must be over 5kg. If the ceiling do not meet the requirement as above, please add a plate on the back of the ceiling to strengthen the thickness and weight-bearing. 1) Remove the selected ceiling and place the mounting bracket on the suitable location of the ceiling. Marking four holes of the bracket on the ceiling and one hole for Ethernet cable which is 5cm in front of the U-shaped notch. Marking four holes of the bracket on the ceiling2) Drill four screw holes for fixing mounting bracket and one hole for Ethernet cable.3) Attach the mounting bracket to the ceiling by using the provided mounting kit.Screw nutEthernet cable holeScrew
netis Wireless High Power Ceiling/Wall mounted AP Router Quick Installation Guide75) Reinstall the ceiling and mount the device by fixing the device to the slot of mounting bracket.4) Connect the Ethernet cable to the WAN/PoE port of the device
8netis Wireless High Power Ceiling/Wall mounted AP Router Quick Installation Guide2 Wall Mout1) Place the mounting kit on the wall and mark four holes of the bracket on the wall,and then drill four holes on the wall. Please note that the U-shaped notch must be consistent with the actual direction of the network.2) Attach the mounting bracket to the wall by using the provided mounting kit.3) Connect the Ethernet cable to the WAN/PoE port of the deviceMarking four holes of the bracket on the wall.Blue PortYellow PortSetscrewScrew
9netis Wireless High Power Ceiling/Wall mounted AP Router Quick Installation Guide4) Mounting the device by fixing the device to the slot of mounting brackets.
NETIS SYSTEMS CO., LTD.www.netis-systems.comMADE IN CHINA5.TroubleshootingQ How do I restore my netis WF2520/WF2520P to default settings?A With the router powered on, holding “RESET” button on the PoE injector or the device for 8s~10s with a pin to restore it to factory defaults.Q What can I do if my Internet cannot be accessed?A 1) Check to verify the hardware connections are correct. Please refer to the “Hardware Connection” step. 2) Refer to 3.1) to set a Static IP address for your PC and connect the WF2520/WF2520P to your PC. 3) Open a web browser and login to http://192.168.1.1 4) Re-check your setting 5) Reboot the modem first and then netis device. Wait for one minute before you check the Internet again. 6) If Internet access is not available, please connect your computer directly to your modem and try the Internet again. If the Internet is still not working, please contact your ISP for further help.Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:·Reorient or relocate the receiving antenna.·Increase the separation between the equipment and receiver.·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.·Consult the dealer or an experienced radio/TV technician for help.FCC RF Radiation Exposure Statement:1. The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.3. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation Technical Support:USA/ CanadaToll Free: +1 866 71 network (+1 866 716 3896)E-mail: usa_support@netis-systems.comOther Regions:E-mail: support@netis-systems.com

Navigation menu