NEXI MINICUBE Bluetooth Wireless Speaker User Manual 1

NEXI LIMITED Bluetooth Wireless Speaker 1

User manual

Wooden Bluetooth SpeakerInstruction ManualMINI CUBERead this instruction manual before operating the appliance; and save it for further reference.Congratulations on your purchase of this Bluetooth speaker for your iPod/iPhone/iPad or mobile phone. You can enjoy audio from the compatibleBluetooth device or other audio devices. To get the most from your speakersystem, please take a few minutes to read these instructions.Safety instruction* Heed all warnings.* Follow all instructions.* Do not use this device near water; clean only using a dry or slightlymoist cloth.* The appliance shall not be exposed to dripping or splashing and noobjects filled with liquids, such as vases, shall be placed near the product.Do not place speaker on any wet surface.* D o not allow children to play with the product.* Do not cover the unit with any table-cloths, curtains, etc. Place the unitwhere there is good air circulation.* No naked flames sources, such as candles, should be placed on theproduct.* Press the player's buttons gently. Pressing them too hard can damagethe player.* Do not use the player in an extremely dry environment, as this can leadto static discharge which can damage the player.* Do not expose product to temperatures above 35C; keep it out of directsunlight.* This product has no user-serviceable parts. Do not attempt to repair thisproduct yourself. Only qualified service personnel should perform servicing.* Care required with the use of this apparatus in tropical and/or moderateclimates.* Do not subject the product to harsh impacts. Do not drop the appliance.This may result in damage to the product.* Use a slightly damp, lint-free cloth to clean this appliance.* This product is not intended for commercial use. This product is intendedfor indoor. Do not mount this product on a wall or ceiling.* Do not place unit near TV, speakers, wireless telephones and otherobjects that generate strong magnetic fields.* When the unit is affected by a strong electromagnet field or by otherinterference simply turn off to reset the speakers, it will return to normaloperation.* The batteries of the speakers are not user-replaceable. If battery failureoccurs shortly after they have been fully charged, please take it to yourlocal service center for replacement by a qualified service technician.* Do not use this product inside hospital or next to any medical instrument.* Only use attachments/accessories specified by the manufacturer.The standard accessoriesUnpack the unit carefully. We recommend that you save the box and packingmaterials, in case you wish to store the unit. Before setting up the unit, verify that the following accessories are present: 2/ USB~Line-in Cable 3/ Instruction Manual1/ Speaker UnitTechnical SpecificationsModel No.  :  MINI CUBE  DC power input : DC 5V 1A Speaker size  : Dia 40mmBluetooth A2DP functionSilicone finishBuilt-in 600mAh Li-ion rechargeable batteryBattery life :  5Hrs ( Volume at 50% )Mini USB jack, power by USB cable ( USB cable included ) 3.5mm Aux jack for connection to other MP3, CD, Laptop Audio Output Power :  3WWorking Distance in open air  :  < 10MNOTE :  As a result of continual improvements, the design andspecifications of the product within may differ slightly to the unitillustrated on the packaging. Charging LED IndicatorLED in red light Charging statusLED in off mode Charging is finishedBlue LED Status IndicatorPaired Blue light stops flashAux-in mode Blue light flash quicklyPower on Light up ( Blue )Power off Light switches offHow to charge the speakerYour speaker has an built in rechargeable battery, before the first use, thebattery should be charged to ensure optimal performance and battery life,charging the speaker for about six hours after connecting the speaker to theUSB port of a PC which is powered on. Alternately the speaker may bepowered by a 110V/60Hz wall charger (sold separately) with a 5V 1Amp USBoutput.The red charging indicator will be “on” while it is charging; the red light switchesoff once battery is full charged. The repeat charging time needs about 4-5 hours; the playback time has about2-3hours, it depends on the volume level as you desired. Set up1.  Slide the power switch to “On” to turn on the speaker. The blue LEDindicator will be flashing shows Bluetooth pairing.2.  The Speaker starts searching for Bluetooth device.3.  Turn on your Bluetooth device (iPod/iPhone, mobile phone or compatibledevice). Refer to the device user manual to activate the Bluetooth functionand pair with the Bluetooth device. 4.  For Apple iPhone select Settings, General, Bluetooth and wait for the iPhone to search for the device5.  Select the “MINI CUBE” device from the Bluetooth list, Tap the “Not paired”to pair the device.6.  Once paired the LED indicator will stop the flash.7.  When paired successfully both the speaker and your Bluetooth device willstore the device. Now you can play music from your iPod/iPhone or mobilephone through the Bluetooth speaker. When you use the same Bluetoothdevice to connect to the speaker there is no need to use the password.8.  When it is not being used for a long period time, please turn off the speaker.Listening to Bluetooth deviceYou can listen to a Bluetooth device through this speaker. Note: the effective operation range between the speaker and your Bluetoothdevice is approximately 10 meters in open air.1.  Switch on to turn on Bluetooth function. Activate the Bluetooth function inyour Bluetooth device. Play music from your Bluetooth device and enjoy iton your Bluetooth speaker.2.  To adjust speaker volume by touching the button on the Bluetooth Speaker.3.  To Pause and resume play of the music track, touch the Play/Pause on theBluetooth Speaker.Remark: 1. If the device has already been paired to the speaker before, then just selectMINI CUBE and it will pair again.2. Please do not play music via AUX in function while charging in process. Play from an external deviceIf the music player does not supply the Bluetooth function, you can also listento an external audio device through this speaker. The supplied audio cablehas 3.5mm plug.1. First connect the 3.5mm audio plug to the 3.5mm AUDIO output orearphone jack on an MP3 player, plug the Micro USB plug to theAUX/DC in jack on your speaker.2. Speaker will switch to Line In mode automatically. 3. If you want to adjust the volume level of your speaker, only adjust thevolume control on the connected MP3 player.4. If you want to Play/pause the music play, just control the native buttonson your  MP3 player.Care and maintenance Instructions:When cleaning the unit, you should first unplug it from the power supply. Useonly a dry soft cloth to wipe the unit. Never allow water or any other liquids toget inside the unit while cleaning. Do not use any cleaning agents containingalcohol, ammonia, benzene, or abrasives as this may harm the set.Unplug the unit if you are not using it for an extended period of time. Thisproduct is not intended for commercial use. Household use only. Symptom Possible problem and solutionCannot pair successfullyCheck whether the speaker is in power on andsearching mode.Check whether there are too many Bluetoothreceivers around your Bluetooth device. Turnthem off to avoid any disturbance. And pair again.The sound is smallor distortedCheck the volume setting on your Bluetooth deviceand adjust the volume to a suitable level.Cannot play properly,the music isintermittentlyCheck whether the distannce between thespeaker and your Bluetooth device is out of itsworking distance 10m, or whether there are someobstacles blocking the communication betweenthe speaker and the Bluetooth device. Move thespeaker or the Bluetooth again to get the bestposition.1 2 3456Wooden Bluetooth SpeakerInstruction ManualKIKORIRead this instruction manual before operating the appliance; and save it for further reference.CHARGING INDICATOR AUX IN / DC INPOWER SWITCH BLUETOOTH INDICATORMINI CUBEFCC ID :  2ACUH-MINICUBEFCC ID :  2ACUH-MINICUBEThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.Changes or Modifications not expressly approved by the party responsible could void the user’s authority to operate this device.

Navigation menu