NEXI PILOT Bluetooth Wireless Speaker User Manual 1

NEXI LIMITED Bluetooth Wireless Speaker 1

User manual

Congratulations on your purchase of this Bluetooth speaker for your iPod/iPhone/iPad or mobile phone. You can enjoy audio from the compatibleBluetooth device or other audio devices. To get the most from your speakersystem, please take a few minutes to read these instructions.Safety instruction* Heed all warnings.* Follow all instructions.*Do not use this device near water; clean only using a dry or slightlymoist cloth.* The appliance shall not be exposed to dripping or splashing and noobjects filled with liquids, such as vases, shall be placed near the product.* Do not place speaker on any wet surface.* D o not allow children to play with the product.* Do not cover the unit with any table-cloths, curtains, etc. Place the unitwhere there is good air circulation.* No naked flames sources, such as candles, should be placed on theproduct.* Press the player's buttons gently. Pressing them too hard can damagethe player.* Do not use the player in an extremely dry environment, as this can leadto static discharge which can damage the player.*Do not expose product to temperatures above 35C; keep it out of directsunlight.* This product has no user-serviceable parts. Do not attempt to repair thisproduct yourself. Only qualified service personnel should perform servicing.* Care required with the use of this apparatus in tropical and/or moderateclimates.* Do not subject the product to harsh impacts. Do not drop the appliance.This may result in damage to the product.* Use a slightly damp, lint-free cloth to clean this appliance.* This product is not intended for commercial use. This product is intendedfor indoor. Do not mount this product on a wall or ceiling.* Do not place unit near TV, speakers, wireless telephones and otherobjects that generate strong magnetic fields.* When the unit is affected by a strong electromagnet field or by otherinterference simply turn off to reset the speakers, it will return to normaloperation.* Do not use this product inside hospital or next to any medical instrument.* Only use attachments/accessories specified by the manufacturer.The standard accessoriesUnpack the unit carefully. We recommend that you save the box and packingmaterials, in case you wish to store the unit. Before setting up the unit, verify that the following accessories are present: 2/ Power Adaptor 3/ Instruction Manual1/ Speaker UnitListening to Bluetooth deviceYou can listen to a Bluetooth device through this speaker. Note: the effective operation range between the speaker and your Bluetoothdevice is approximately 10 meters in open air.1. Switch on to turn on Bluetooth function. Activate the Bluetooth function in your Bluetooth device. Play music from your Bluetooth device and enjoy it on your Bluetooth speaker.2. To adjust speaker volume by rotate clockwise / anti-clockwise of the volume knob on the Bluetooth Speaker.3. To Pause and resume play of the music track only on the Bluetooth Device.Remark: 1. If the device has already been paired to the speaker before, then just select PILOT and it will pair again. 8. When paired successfully both the speaker and your Bluetooth device willstore the device. Now you can play music from your iPod/iPhone or mobilephone through the Bluetooth speaker. 9. When it is not being used for a long period time, please turn off the speaker.4Technical SpecificationsModel : PILOTDC power input : DC 9V 2A Speaker size : Dia 3" X 2Bluetooth A2DP function3.5mm Aux jack for connection to other MP3, CD, Laptop Audio Output Power : 8W X 2Working Distance in open air : < 30'NOTE : As a result of continual improvements, the design andspecifications of the product within may differ slightly to the unitillustrated on the packaging. Play from an external deviceIf the music player does not supply the Bluetooth function, you can also listento an external audio device through this speaker using audio 3.5mmcable ( not included ).1. First connect the 3.5mm audio plug to the 3.5mm AUDIO output or earphone jack on an MP3 player, plug another 3.5mm jack to the AUX IN socket on your speaker.2. Speaker will switch to Line In mode automatically. 3. If you want to adjust the volume level of your speaker, only adjust thevolume control on the connected MP3 player.4. If you want to Play/pause the music play, just control the native buttonson your MP3 player.Symptom Possible problem and solutionCannot pair successfullyCheck whether the speaker is in power on andsearching mode.Check whether there are too many Bluetoothreceivers around your Bluetooth device. Turnthem off to avoid any disturbance. And pair again.The sound is smallor distortedCheck the volume setting on your Bluetooth deviceand adjust the volume to a suitable level.Cannot play properly,the music isintermittentlyCheck whether the distannce between thespeaker and your Bluetooth device is out of itsworking distance 10m, or whether there are someobstacles blocking the communication betweenthe speaker and the Bluetooth device. Move thespeaker or the Bluetooth again to get the bestposition.56Trouble ShootingNo sound from thespeaker when playingmusic via bluetoothCheck the bluetooth is connected and the volumesetting on your Bluetooth device.Check the AUX-IN cable is unpluged.Note: In power on mode, the AUX in function is effective if the AUX in cable is connected although the Bluetooth indicator lights continually; the Buletooth function is effective if the AUX in cable is disconnected. Wooden Bluetooth SpeakerInstruction ManualRead this instruction manual before operating the appliance; and save it for further reference.PILOTInstruction ManualRead this instruction manual before operating the appliance; and save it for further reference.FeaturesPILOT1 2 3Set up1. Connect the DC IN socket with the Power Adaptor provided.2. Press and hold the power switch to turn on the speaker. The blue LEDindicator will be flashing shows Bluetooth pairing.3. The Speaker starts searching for Bluetooth device.4. Turn on your Bluetooth device (iPod/iPhone, mobile phone or compatibledevice). Refer to the device user manual to activate the Bluetooth functionand pair with the Bluetooth device. 5. For Apple iPhone select Settings, General, Bluetooth and wait for the iPhone to search for the device6. Select the “PILOT” device from Bluetooth list, Tap the “Not Connected”to pair the device.7. Once paired the LED indicator will stop the flash.Care and maintenance Instructions:When cleaning the unit, you should first unplug it from the power supply. Useonly a dry soft cloth to wipe the unit. Never allow water or any other liquids toget inside the unit while cleaning. Do not use any cleaning agents containingalcohol, ammonia, benzene, or abrasives as this may harm the set.Unplug the unit if you are not using it for an extended period of time. Thisproduct is not intended for commercial use. Household use only. BT indicatorRotate for Volume ControlOFF AUX INVOLUM EBLUETOOTHRotate for Power On / Offand input selectWooden Bluetooth SpeakerMASSFCC ID : 2ACUH-PILOTFCC ID : 2ACUH-PILOTThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.Changes or Modifications not expressly approved by the party responsible could void the user’s authority to operate this device.
Congratulations on your purchase of this Bluetooth speaker for your iPod/iPhone/iPad or mobile phone. You can enjoy audio from the compatibleBluetooth device or other audio devices. To get the most from your speakersystem, please take a few minutes to read these instructions.Safety instruction* Heed all warnings.* Follow all instructions.* Do not use this device near water; clean only using a dry or slightly moist cloth.* The appliance shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed near the product.* Do not place speaker on any wet surface.* D o not allow children to play with the product.* Do not cover the unit with any table-cloths, curtains, etc. Place the unit where there is good air circulation.* No naked flames sources, such as candles, should be placed on the product.* Press the player's buttons gently. Pressing them too hard can damage the player.* Do not use the player in an extremely dry environment, as this can lead to static discharge which can damage the player.* Do not expose product to temperatures above 35C; keep it out of direct sunlight.* This product has no user-serviceable parts. Do not attempt to repair this product yourself. Only qualified service personnel should perform servicing. * Care required with the use of this apparatus in tropical and/or moderate climates.* Do not subject the product to harsh impacts. Do not drop the appliance. This may result in damage to the product.* Use a slightly damp, lint-free cloth to clean this appliance.* This product is not intended for commercial use. This product is intended for indoor. Do not mount this product on a wall or ceiling.* Do not place unit near TV, speakers, wireless telephones and other objects that generate strong magnetic fields.* When the unit is affected by a strong electromagnet field or by other interference simply turn off to reset the speakers, it will return to normal operation.* Do not use this product inside hospital or next to any medical instrument. * Only use attachments/accessories specified by the manufacturer.The standard accessoriesUnpack the unit carefully. We recommend that you save the box and packingmaterials, in case you wish to store the unit. Before setting up the unit, verify that the following accessories are present: 2/ Power Adaptor 3/ Instruction Manual1/ Speaker UnitListening to Bluetooth deviceYou can listen to a Bluetooth device through this speaker. Note: the effective operation range between the speaker and your Bluetoothdevice is approximately 10 meters in open air.1. Switch on to turn on Bluetooth function. Activate the Bluetooth function in your Bluetooth device. Play music from your Bluetooth device and enjoy it on your Bluetooth speaker.2. To adjust speaker volume by touch and rotate clockwise / anti-clockwise on the Bluetooth Speaker.3. To Pause and resume play of the music track, press the Play/Pause on the Bluetooth Speaker.Remark: 1. If the device has already been paired to the speaker before, then just select CUBIC and it will pair again. 8. When paired successfully both the speaker and your Bluetooth device will store the device. Now you can play music from your iPod/iPhone or mobile phone through the Bluetooth speaker. 9. When it is not being used for a long period time, please turn off the speaker.4Model : CUBIC DC power input : DC 9V 2A Speaker size : Dia 3" X 1Bluetooth A2DP function3.5mm Aux jack for connection to other MP3, CD, LaptopOutput Power : 8W Working Distance in open air : < 30'Technical SpecificationsNOTE : As a result of continual improvements, the design andspecifications of the product within may differ slightly to the unitillustrated on the packaging. Play from an external deviceIf the music player does not supply the Bluetooth function, you can also listento an external audio device through this speaker using audio 3.5mmcable ( not included ).1. First connect the 3.5mm audio plug to the 3.5mm AUDIO output or earphone jack on an MP3 player, plug another 3.5mm jack to the AUX IN socket on your speaker.2. Speaker will switch to Line In mode automatically. 3. If you want to adjust the volume level of your speaker, only adjust the volume control on the connected MP3 player.4. If you want to Play/pause the music play, just control the native buttons on your MP3 player.Symptom Possible problem and solutionCannot pair successfullyCheck whether the speaker is in power on andsearching mode.Check whether there are too many Bluetoothreceivers around your Bluetooth device. Turnthem off to avoid any disturbance. And pair again.The sound is smallor distortedCheck the volume setting on your Bluetooth deviceand adjust the volume to a suitable level.Cannot play properly,the music isintermittentlyCheck whether the distannce between thespeaker and your Bluetooth device is out of itsworking distance 10m, or whether there are someobstacles blocking the communication betweenthe speaker and the Bluetooth device. Move thespeaker or the Bluetooth again to get the bestposition.56Trouble ShootingNo sound from thespeaker when playingmusic via bluetoothCheck the bluetooth is connected and the volumesetting on your Bluetooth device.Check the AUX-IN cable is unpluged.Note: In power on mode, the AUX in function is effective if the AUX in cable is connected although the Bluetooth indicator lights continually; the Buletooth function is effective if the AUX in cable is disconnected. Wooden Bluetooth SpeakerInstruction ManualRead this instruction manual before operating the appliance; and save it for further reference.CUBICInstruction ManualRead this instruction manual before operating the appliance; and save it for further reference.BT indicatorRotate Clockwisefor Volume UpFeaturesCUBIC1 2 3Set up1. Connect the DC IN socket with the Power Adaptor provided.2. Press and hold the power switch to turn on the speaker. The blue LED indicator will be flashing shows Bluetooth pairing. 3. The Speaker starts searching for Bluetooth device.4. Turn on your Bluetooth device (iPod/iPhone, mobile phone or compatible device). Refer to the device user manual to activate the Bluetooth function and pair with the Bluetooth device. 5. For Apple iPhone select Settings, General, Bluetooth and wait for the iPhone to search for the device6. Select the “CUBIC” device from Bluetooth list, Tap the “Not Connected” to pair the device.7. Once paired the LED indicator will stop the flash.Care and maintenance Instructions:When cleaning the unit, you should first unplug it from the power supply. Useonly a dry soft cloth to wipe the unit. Never allow water or any other liquids toget inside the unit while cleaning. Do not use any cleaning agents containingalcohol, ammonia, benzene, or abrasives as this may harm the set.Unplug the unit if you are not using it for an extended period of time. Thisproduct is not intended for commercial use. Household use only. Power ON/OFFPlay / PauseNext SongPrevious SongRotate Anti-Clockwisefor Volume DownWooden Bluetooth SpeakerSLATEFCC ID : 2ACUH-CUBICTHIS DEVICE COMPLIES WITH PART 15 OF FCC RULES, OPERATIONIS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC ID : 2ACUH-CUBIC

Navigation menu