NEXXT SOLUTIONS 320U1 IP Camera User Manual Manual 1

NEXXT SOLUTIONS IP Camera Manual 1

Contents

Manual 1

Download: NEXXT SOLUTIONS 320U1 IP Camera User Manual Manual 1
Mirror Download [FCC.gov]NEXXT SOLUTIONS 320U1 IP Camera User Manual Manual 1
Document ID1891649
Application IDL/22VCKT/zR+GgTa3EsOTw==
Document DescriptionManual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize398.65kB (4983069 bits)
Date Submitted2013-01-31 00:00:00
Date Available2013-01-31 00:00:00
Creation Date0000-00-00 00:00:00
Producing Softwarecairo 1.10.2 (http://cairographics.org)
Document Lastmod0000-00-00 00:00:00
Document TitleManual 1
Document Creatorcairo 1.10.2 (http://cairographics.org)

Nexxt Solutions - Integrated Wireless IP Camera
Integrated Wireless IP Camera
INTRODUCTION
Thank you for purchasing the Nexxt Solutions XPY
320 Camera. Our new XPY is an integrated
wireless IP Camera solution that combines high
quality digital video camera with network connectivity
and a powerful web server to bring a clear picture
to your desktop or mobile phone from anywhere on
your local network or over the Internet.
Nexxt Solutions - Integrated Wireless IP Camera
BEFORE YOU BEGIN
• This
camera is intended for indoor use only.
the supplied power adaptor to connect the
camera to the AC mains (5.0V DC, 1.5A).
The warranty does not cover any damage caused
by applying the wrong voltage.
• Never attempt to disassemble the unit.
The warranty does not cover damages as a result
of tampering with, or the improper alteration of the
device.
• Do not point the camera at the sun or at any other
strong light source.
• Do not install the camera where it can be exposed
to rain or water
• Wait at least 10 seconds when powering the
camera on and off. Otherwise, it can cause serious
damage to the CPU.
• When updating the camera, please make sure that:
- the camera is connected directly to a computer
using a network cable;
- all other programs and windows on the computer
have been closed;
- the camera remains connected during the entire
firmware update.
• Use
Nexxt Solutions - Integrated Wireless IP Camera
FEATURES
• The camera combines a high-sensitivity 1/4 CMOS
image sensor with a powerful wireless web server
in order to capture clear images from anywhere,
and to transmit them instantly on your local
network or over the internet.
• Can be used on WiFi or wired networks.
• Selectable image resolution of 640x480 and
320x240 pixels.
• The system can be expanded at any time by adding
multiple cameras.
• View multiple cameras in split screen view or
choose full screen in order to monitor the activity
from a single camera.
• Cameras can be viewed via standard PC or Mac
browsers, including Internet Explorer, Safari,
Chrome and Firefox.
• Infrared LEDs for night vision (up to 15 meters).
• Includes multi-level user management system,
which can be configured with passwords for
controlled access.
• Easy- to-use web browser controls. They also allow
quick configuration changes via the Settings menu.
• Compatibility with smartphones enables you to
view real-time videos over the internet using any
standard browser.
• Supports image snapshots and image forwarding
via email and FTP upload.
NOTES ON WINDOWS AND MAC COMPATIBILITY:
- IP camera setup should be completed on a
Windows PC only using Internet Explorer.
- Live viewing, taking snapshots, recording and
camera configuration are fully supported on
computers with Windows operating systems.
Nexxt Solutions - Integrated Wireless IP Camera
Mac users are only able to:
- view live images via compatible web browsers
including Safari, Firefox and Chrome but are limited
to viewing one camera at a time.
- take and save snapshot images via the web
browser interface.
PACKAGE CONTENTS
Open the box and make sure all items listed below
are included:
• Wireless
IP Camera x1
antenna x1
• AC power adaptor x1
• Quick installation guide x1
• Wi-Fi
• CD-ROM
x1
(includes the IP Super Client software)
• Network cable x1
• Mounting bracket and hardware
NOTE: if any of the listed items are missing or
damaged, please notify immediately the Nexxt Solutions
reseller from whom you purchased the product for
replacement or warranty information.
CAMERA INSTALLATION
Our WiFi Pan and Tilt Camera can be set up in
minutes for instant monitoring and live viewing on
your Windows computer and 3G Smartphone - all
via your wireless network router or switch. For
optional recording capabilities, simply install the
recording software in your Windows PC and
configure it according to your particular needs.
Nexxt Solutions - Integrated Wireless IP Camera
1.Begin by screwing the bracket to the camera.
Connect the camera using the power adaptor that
comes with the product.
2.Using a standard Ethernet network cable, connect
the camera to your network.
The camera can either be connected to a router/
switch or directly to a PC with an Ethernet
network cable. We recommend setting up the
camera on your network using a wired connection
prior to using the device in a wireless configuration.
3.Continue with the setup of the camera (as
described in the following chapter). Once the
camera has been successfully connected to your
network, it can be mounted on the wall or ceiling
using the wall plugs and screws included with the
device. (The camera set up must be performed
using Windows operating system only).
1. Plug the cable into the RJ-45 connector on the
rear of the camera.
2. Plug the other end into an available RJ-45 port
on your router.
3. Connect the power cable to the wall outlet.
Nexxt Solutions - Integrated Wireless IP Camera
Please note that if you are using the camera on
a wireless network, you will need to configure the
camera for wired use, prior to configuring
wireless settings in the device (later described in
this manual).
Accessing the IP camera
Using the IP Super Client Software
Note: The IP network camera is designed to work in
a local area network (LAN) or over the internet. For
the first method, we highly recommend using the
software included in the CD. The installation steps
are described below.
1. Introduction
The IP camera Super Client is an easy-to-use
software designed for surveillance applications
with multiple cameras. This software includes PT
controls, recording, alarm notifications, in
addition to a central management feature that
allows the administration, configuration and
access control settings for each individual device.
Functions:
*Supports up to 81-video monitoring in one screen.
*Supports multi-level structured device list.
*Supports scheduled recording with alarm.
*Supports panoramic recording.
*Supports motion detection, sound alert and
external alarm trigger.
Nexxt Solutions - Integrated Wireless IP Camera
*Supports audio, SMS, SMS modem, dialing, email,
FTP and alarm output switch.
*Supports inquiries, browsing of alarm and
operation log records.
*Supports multi-level access management.
*Supports remote login to check records and
alarm records.
Adding devices
After installing the client software, we need to add
the devices. When running the program, the device
list on the right of the main interface is empty; there
is a guide to show you how to add the devices.
Click the right button to choose “add new device”
or “add new group”. This program supports a
multi-level structure to manage existing devices.
Nexxt Solutions - Integrated Wireless IP Camera
Now, let’s take the 300-series and 330-series as
examples to introduce the adding device option.
300-Series Image:
Nexxt Solutions - Integrated Wireless IP Camera
330-Series Image:
Name: name assigned to the camera, used to
distinguish it from other devices connected.
This name will be displayed on the camera list.
Basic information: the basic information used
for connecting the camera, such as connection
method, username, password, PT protocol, etc.
Device parameters: set size of the image and
frame rate. Not all series have this option available.
10
Nexxt Solutions - Integrated Wireless IP Camera
Alarm: This menu contains all the alarm-related
settings.
Record: This menu contains all recording related
settings.
Connection Information
IP/Domain mode: This mode provides LAN access
to the camera, or to a camera which has a domain
or fixed IP. To use this mode, an incoming port should
be assigned. By default, this port is set to 81.
Username/Password: The username and password
used to access the camera.
Forwarding Server: It provides access to videos by
retrieving the files from the server. This requires the
setup of server settings. This mode cannot support
PT control.
Support P2P: Supports P2P technology. This mode
cannot support PT Control.
Camera Parameters
300-Series Image
11
Nexxt Solutions - Integrated Wireless IP Camera
This menu is used to quickly set the camera
parameters. Not all models have this function. Click
the Get button to obtain the current settings. Click
Apply or Set depending on the model to save your
modifications.
Alarm
It includes all the alarm-related settings. Please
refer to the Alarm section for more details.
Record
It includes all the recording-related settings. Please
refer to the Recording section for more details.
12
Nexxt Solutions - Integrated Wireless IP Camera
Freq./Time setup
It is used to schedule a timing action to change the
lightning frequency.
Additional information
It is used to enter personal-related information, such
as user name, telephone, address, and memo.
Introduction to the main window
Below is the main window of the client software.
Device Tree Components: this tree provides a visual
representation of all detected devices. Supports
multi-level structure from which users can connect
or disconnect devices in a particular group. Users
can double click on a device to connect it and see
the video in the display area, or click the Camera/
Group Options button to modify the settings.
13
Nexxt Solutions - Integrated Wireless IP Camera
Display Control Panel: users can choose between
full view in a single screen or a split screen configuration of 4, 9,16,25,36,49, 64 or 81 frames.
PT Control Panel: direction buttons for controlling
the Pan and Tilt feature of the camera.
Main Menu: allows the user to connect or
disconnect all the devices, open the history
manager, system setup, and other functions.
PT Control
This feature is available based on the model of the
camera. If your camera supports the Pan and Tilt
feature, enable it using the client software. Once
enabled, the movement of the camera can be
controlled with the buttons in the PT control area.
Video Recording
Video recording is a basic function of the client
software, where users can choose to record
continuously, schedule a recording or setup a
recording whenever an alarm is triggered. Under
the Scheduled recording option, users can set
specified dates and times. Records will be then
saved to the assigned folder path set in the options
settings, and will automatically overwrite the
earliest files when the disk is full. The user can set
14
Nexxt Solutions - Integrated Wireless IP Camera
the parameter of how long to keep the files. For the
IP camera with MJPEG format, the client software
can compress the saved data into MPEG4 format,
which can be used to reduce the usage of space on
the disk.
To set record function, right click the device and
choose Camera Options or click the
Camera/
Group Options button. Next, go to Alarm tab.
Enable record: when selecting this option, the
recording function will be enabled.
Continuous recording: the client software will
record all the time.
15
Nexxt Solutions - Integrated Wireless IP Camera
Scheduled recording: users can appoint a certain
period in which the client will start recording.
Alarm
The Client software supports various kinds of alarm
triggers, alarm events, and can be used to set an
alarm schedule.
Select the camera in the display area or from the
device list, click the right button to choose Camera
Options, or click the
Camera/Group Options
button. Next, go to Alarm tab.
16
Nexxt Solutions - Integrated Wireless IP Camera
Enable alarm: In order to use the alarm function,
you must check this option.
Alarm group: It is a user-defined name to identify
and link cameras belonging to the same group.
Alarm lasting time: The period of time the software
will keep the alarm active. That will have the same
duration as the event causing the alarm, which
includes the capturing of audio and the video
recording time.
Schedule trigger: Sets the schedule during which
alarm can be triggered.
17
Nexxt Solutions - Integrated Wireless IP Camera
Days: specify the day(s) of the week the alarm will
be triggered.
Time: sets a starting and ending time for the alarm.
Trigger mode: specifies the type of event that would
trigger an alarm.
It currently supports motion detection and alarm
sensor input (depending on the model).
An action on alarm defines how the software will
respond once the alert is triggered.
The actions supported are: sound, video recording,
snapshots, alarm siren, email, FTP uploading, SMS,
calling, SMS modem, alarm-output switching,
program executing and URL opening.
Below is the detailed explanation for each alarm
action.
Sound: when an alarm is triggered, the program
will play a sound on the computer to frighten the
intruder. Sounds can be customized.
You can choose the sound from the list in the
18
Nexxt Solutions - Integrated Wireless IP Camera
program. Select the sound and click OK to save the
setting.
You can also choose other sound files from your
local disk drive. In other words, you can record
“Catch the thief” in a file, save it and then select the
sound file by clicking the folder button to add the file
you want.
If you want to read a text on alarm, you can check
the “Speech” icon and edit the contents to be read.
In addition to reading the normal text, the program
also displays the description of pre-defined features,
such the name of the alarm device and alarm time.
These pre-defined contents appear within the “$$”
symbols. The software includes the following
pre-defined content:
$$DevName$$: the name of the device sending the
alert signal.
$$AlarmTime$$: displays the time when the alarm
occurred.
$$Trigger$$: displays the event triggering the
alarm.
If you only need to read a text having no audio being
played, you can choose “sound file” without
specifying the use of one. Check the “Speech” box
below.
19
Nexxt Solutions - Integrated Wireless IP Camera
Email: when the alarm goes off, the program will
send an email acknowledgement with the pictures
or video recording attached.
Attachment: the user can choose to send emails
with or without attachments, or with pictures or
videos. However, when choosing to send an
attachment, the user needs to have the live
recording function enabled first.
Receiver: it is the email address to which the alarm
acknowledgement will be sent to.
Copy: it is the email address or addresses to which
the alarm acknowledgement will send a copy of the
message and attachments. Use commas to
separate multiple email addresses.
Test: when you click this button, the program will
send a test email. Users can check whether it was
correctly sent or not. If sending fails, the program
will show you the details of the failure.
Users have the option to choose the mail server
according to their own needs.
20

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 20
Creator                         : cairo 1.10.2 (http://cairographics.org)
Producer                        : cairo 1.10.2 (http://cairographics.org)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: X4Y320U1

Navigation menu