| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3328907 |
| Application ID | mGFU1ielngX9qa0ByJxFhA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 502.78kB (6284773 bits) |
| Date Submitted | 2017-03-23 00:00:00 |
| Date Available | 2017-03-26 00:00:00 |
| Creation Date | 2017-03-14 13:51:19 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2017-03-22 13:48:27 |
| Document Title | 未命å -2 |
| Document Creator | CorelDRAW X6 |
| Document Author: | Administrator |
NE)(XT
SOLUTIONS
CONNECTIVITV
-)))) )))) )))) ))))
Nebula ’I 200- AC
LJLJAL
JAND‘AL. WIFuzLEbS
-{ULJ|E-{
Mudm AHNuISu-IUE
USER GUIDE
Thank you for purchasing the new Nebula 1200-AC dual band router
from Nexxt Solutionsw‘ If any of the following items are mismatched,
missing or damaged, please contact the store from whom you
purchased the unit for immediate replacement
- Dual band AC Wireless router
' Power adapter ’l’lU/EEOV
- Network cable
- User guide
’I. Preliminary steps
This advanced network device works as Wireless router. universal
repeater and WlSP client Before setting up the router, you must verify
that you have highrspeed internet access available The most Widely
used connection nowadays is broadband DSL or Cable The description
used in this guide is based on that type of connection.
2. Product layout
LED indicators on the front panel provide information about network
activity, the connection and link status of the ports in real time They
also facilitate activity monitoring and troubleshooting the performance
of the device
5V5 2.46 56 WAN
LED
indicator Status DESCT'PUUH
SYS Blinking The system is working properly
Solid The 2.46Hz wireless connection is enabled
The deVice is actively sending or transmitting data
2.45 Bl k
In Ing wirelessly over the 2 4GHZ band
Off The 2 AGHz connection is disabled
Solid The SGHZ wireless connection is enabled
55 The device is actively sending or transmitting data
Bl k
In Ing Wirelessly over the EGHZ band
Off The SGHZ connection is disabled
Solid An ethernet cable is connected in this port
,2 ,3 The deVice is actively sending or transmitting
WAN/1 Blinking packets over that port
Off No ethernet connection is detected on this port
After a client device is successfully added to the
Solid network via WPS. this LED stays illuminated for
about 2 ~ 5 minutes, before turning off completely.
The router is performing WPS authentication
WPS Bl'nk'ng on a client device
WPS is disabled
WPS set up failed
Off Or. the LED is extinguished after a wireless
device has been successfully added to the
network via WF'S
Rear panel
oooooo
SIIPTV 2 ‘l WAN POWER WIFI RSTIWPS
Antennas: Four EdBi omnidirectional antennas.
3/IPTV: This IPTV port can be used for connecting an lnternet
Protocol TV receiver. and as a LAN port. when the lPTV feature is
not enabled.
LAN ports [2/1]: Connect your local laptop or desktop computers
in your network to any of these HJ45 ethernet ports
WAN: This Rd45 port is where you Will connect the DSL/cable
modem or ethernet line from your ISP.
Power DC-IN: Connect the supplied power adapter to this jack
Wi-Fi: Use this button to enable and disable the Wireless function.
Reset/WPS:
Press and hold this button for about 8 seconds until all LEDs light
up once. and then release it to restore the dance to its factory
default values.
Press and hold for a second to use the WP5 feature [if enabled]
To successfully establish a WPS link. Within the first 2 minutes the
wireless clients WPS feature must be enabled.
m4
News?)
3. Hardware installation
’I. First determine the optimum location for the router The best place
is usually at the center of your Wireless network With the antennas in
the upright position.
2. Then. connect the modem to the internet port of the router using
the supplied ethernet cable.
3. Connect your PC to the router if using a Wired connection
4. Insert one end of the supplied power adapter to the AC input lack
located on the rear panel of the router. before plugging the other
end to a standard electrical Wall outlet.
LL—J ‘ ’9”: m
i)
4. Router configuration
’| Open a Web browser to access the main Web interface Type
nexxtwifi.cum or 192163.031 in the address bar and press Enter
on the keyboard
2 The Quick setup Wizard Will come up to assist you in completing the
internet settings. Click on Start to initiate the process
Quick sun: Wllaffl
3 Select your connection type and click on Next. For the purposes of
this guide. the DHCP option Was selected.
Please seletf your conrecucn type
A. o... i... . . h. m-
4 In this screen. you can set up the Transmit power. SSID and
Password. Once you finished configuring these settings. click on
Next to continue
.\i am m m
5 Once done, the message stating that the setup is complete will be
displayed To configure additional settings. the user can click on the
Advanced option. as Illustrated below
mu re A; m- YMCM net :Mnecua
mm mm
N Null 52mm x.
E: The next time you access the web Interface through nexxtwifi.com
or 191168.04, the default Login screen will be displayed. The
default user name and password is admin
Nebula 1EOO-AC
wwetess Al. l ROUTER
5. Connecting to Wi-Fi using Windows 10
’I. To connect to the router wirelessly. click on the wireless icon on
your taskbar
2. Proceed to select the Wireless network followed by Connect By
default. the wireless SSID is NexxLXXXXXX [whereby "x“ represents
the last digits of the MAC address].
3. Enter the user defined or preassigned password, if any. and click on
Next to continue.
4. lf connection is successfully established, the Connected message
Will come up on the screen
4. In order to access your router from a remote location you will have
to register an account. Click on the option on the left hand corner
[person lCDl’I].
NE) 11
6. How to setup and use the Nexxt Wi- '
the AC wireless router
app for
’I. Search and install the Nexxt WirFi app from the Apple or Boogie app 5' CI'Ck 0” “’9'"-
store.
2. For this guide, we will be using a phone based on an Android
platform.
3. Open the Nexxt Wi-Fi app
041le m...
6. Then click on Sign Up.
Paw Vinny-av
Saw-
7. Enter the email address you Wlsh to register. and assign a password.
Type In the Verification code displayed. and Clle on Sign Up
El. A verification email from cloud©nexxtsolutions.com will be sent. Once
you receive the small. click on the confirmation link.
9. Your account is now active. Type in your email address and password.
followed by Login
’lO You will now need to log into the Nebula 1200M) web user interface
from a PC Once logged in. go to Advanced Settings and Clle on
Nexxt App.
11 Cllck on the Nexxt App option to enable the feature
numb! x
72 Now type in the email address you used on the app in the Account
field. Clle on Save when done
um... I - Security: Starts a security checkup Ensures your Nexxt AC
Wireless router is protected
- 1 _ . 16. From the Administration menu [upper rightrharid corner option].
you can do the following
— - You can change the Wi-Fi name and password Turn off 2.4GHz or
5GHZ Wl'Fl Hide the WirFi names of either 2 4GHZ or SGHZ band
- Login password: Changes the Login Password of the AC wireless
router.
13. Go back to the app and pull down from the middle of the screen. . Internet settings: sets up pme, Dynamic "3. D.- 5mm no
This will refresh your account and it Will show your AC Wireless router connections.
on the screen. From the device list. tap on your router.
14. You Will be able to make changes to your AC wireless router
anywhere in the World. at any time.
- News: A log of everyone who has logged on to the router.
- Software update: Brings the application up to date.
- Reset: Returns the AC Wireless router to its factory default values.
- Logout: Logs off the AC Wireless router.
- Reboot: Allows to restart the router.
v. "in: sunny.
"mu- m, rm...
a. Wham ‘ m w l‘inwd
é a...
5 lrixri'ifl Selling)
um
' Salli-mu umm
i.‘ my:
I m; u“-
m‘w s» —
15. The Nexxt WirFi app provides the folloWing features:
- Current download and upload speeds being used
- GoS option to manage bandwidth control
- Parental controls: Allows you to setup when each person can go
online and for hoW long you want. You can restrict what websites
they can and cannot go to
- Access control: You can turn off/on notification of when anyone
logs on/off the router. You can also allow that person to use the
AC router or add them to the blacklist so they can't use it at all.
- Power saving: You can turn off/on the LED on the router. Set a
schedule for when the WiFi Will be off/on. Also Wake Up the router
if you have Sleeping Mode on
- Guest access: Turn off/on the Guest Network.
- Signal: One Touch Optimization and change the Signal Strength.
FCC statement
This equipment has been tested and found to comply With the limits for
a Class E! digital device. pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and. if not installed and
used in accordance With the instructions. may cause harmful interfe-
rence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful Interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver
Connect the equipment Into an outlet on a circuit different from that
to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies With FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies With Part 15 of the FCC
FlF Rules. This equipment must be installed and operated in accordance
With provided instructions and the antennals] used for this transmitter
must be installed to provide a separation distance of at least 25 cm from
all persons and must not be corlocated or operating in CDWUHCEIUH With
any other antenna or transmitter End-users and installers must be
provided With antenna installation instructions and consider removing the
no-collocation statement.
This device complies With Part 15 of the FCC Rules. Operation is subject
to the followmg two conditions:
[1] this device may not cause harmful interference. and
[2] this device must accept any Interference received, including interference
that may cause undesired operation
The device is for indoor usage only.
Caution!
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
FCC ID: X4VNEL12AC
MANUAL DEL USUARID
Gracias por preferir el nuevo Router Nebula 1200-AC de doble banda
de Nexxt SolutionsTM Si faltara cualquiera de los articulos mencionados
en la lista, estuviera danado o si no coincide con la descripcion.
contactese de inmediato con el distribuidor donde adquirio la unidad
para su reemplazo.
- Router inalambrico AC de doble banda
- Adaptador de alimentacion. de 11D/220V
- Cable de red
- Guia del usuario
1. Pasos preliminares
Este avanzado dispositivo de red funciona como router inalambrico.
repetidor universal y cliente WISP Antes de configurar el router, debe
asegurarse primero de contar con un servicio de internet de alta
velocidad La conexion mas comunmente utilizada en la actualidad es
DSL a cable de banda ancha La descripcion que se utiliza en esta guia
5e basa en este tipo de conexion
2. Descripcion del producto
Los indicadores LED en la seccion frontal del dispositivo exhiben la
actividad en la red, el estado de conexion y de enlace de los puertos en
tiempo real. Estos ademas se utilizan para el monitoreo y la identifica-
cion de problemas que puedan afectar e| desempefio de la unidad
SYS 2.46 56 WAN 1
.009
lndioador
LED
Estadu
Descripcifin
SYS
‘ntermltente
E‘ Sistema Esta funmonando correctamente
2.4G
Permanente
La Conex‘on Inalémbr‘ca par ‘3 bands de 2 4GHZ
esté habl“tada
‘ntermltente
E‘ o‘sposlt‘vo Esta env‘anoo o transm‘t‘endo datos en
forma Inalémhr‘ca our ‘3 bands de 2 4GHZ
Apagaoo
La conex‘én por‘ la panda de 2 4GHz no Esta hab‘lltada
55
Permanente
La conex‘én Inalambr‘ca per ‘a hands ole SGHZ
Esta habihtada
‘ntermitente
E‘ d‘sposit‘vo esté env‘ando o transm‘t‘endo datos en
forma inalémhr‘ca por ‘a banda de SGHZ
Apagadu
La cunex‘én par“ la banda de EGHZ no esta’ hab‘l‘tada
WAN/’l /2/3
Permanente
Un Cab‘e de Ethernet Esta cunectadu en este puerto
‘ntermltente
E‘ d‘sposlt‘vu esca env‘ando o transm‘t‘endo paquetes
de data: our ass puerto
Apagaoo
No Se detects n‘nguna cunexlon de Ethernet act‘va
en este puerto
WPS
Permanente
Después de haber ‘ntegrado exltosamente un o‘sposltlvo
o‘lente a la red via was, este ‘nd‘oador LED permaneoe
i‘urn‘nado entre 2 y 5 m‘nutos antes de extingu‘rse por
Comp‘eto
‘ntermitente
E‘ router na ‘n‘c‘ado ‘a autentioacion wps an un
dlspus‘t‘vo cl‘ente
Apagaoo
wrs no esté nab‘l‘tado
No pudu comp‘etar‘se la ounf‘guracion WPS
0 se ha ext‘ngu‘du e‘ ‘ndloadur LED tras haber ‘ntegrado
un disposmvo ‘na‘émbr‘oo a ‘a red via WPS
Panel posterior
3I|PTV 2
1 WAN POWER WIFI RSTIWPS
Antenas: Cuatro antenas ommdireoc‘onales de EdE!‘
G/IPTV: Este puerto IPTV slrve para oonectar un receptor de
television basado en e‘ protoco‘o de mternet, y tamb‘en como un
puerto LAN ouandc el modo ‘PTV Se enouentra Inhabllltadc.
Puertns LAN [2/1]: Coneote au oomputador de eaor‘tor‘o o
portat“ en oua‘oulera de estos puertos ethernet HJ45 dlspon‘bles.
WAN: Este puerto FU45 es para la oonexion de‘ DSL/modem de
cable 0 “nea oe ethernet de su proveedor ‘SP.
Entrada de EC: Conecte e‘ adaptaoor de oorriente oue ae ‘no‘uye
con e‘ d‘sposltlvo en este conjuntor.
Opr‘ma este baton para habihtar o inhabilitar ‘a funoion
‘nala'mbrloa.
Reposicion/WPS:
Tras mantener este boton oprlmldo por aproxlmadamente 8
segundoa naata que todas Ias ‘unea LED 5e “um‘nen al miamo
t‘empo. suélte‘o para restab‘ecer e‘ d‘spcsltlvo a sus va‘cres
or‘gina‘es de programao‘on.
‘V‘antenga oprlrn‘do este boton por un Segundo para usar ‘a opolén
WF‘S [de estar naoilitaoa]. Para estao‘ecer efect‘vamente un enlaoe
WPS, debe ser aotlvada Ia opolon WPS ‘na‘ambr‘ca dentro de Ios
dos pr‘meros minutoa en el o‘spoaitivo oliente.
. Instalacion de componentes fisious
. Primero def‘na ‘a ublcac‘on opt‘ma de‘ router. Genera‘rnente e‘
me‘or ‘ugar se a‘tfla al oentro de su red ina‘émbr‘oa. or‘entando Ia
antena en poslolon vert‘ca‘
. Luego oonecte e‘ modem en el puerto de internet de‘ router usando
e| cable de ethernet que se Inoluye eon e‘ dispos‘t‘vo
Coneote Ia PC a‘ router 5i usa una conexion eon cable
. ‘nserte un extrema del adaptador de oorr‘ente sumlnlstrado en e‘
oon‘untor de DA ubioado an e‘ panel poster‘or de‘ router. antes de
enohufar e‘ otro extrema a un tomaoorr‘ente estandar de la pared.
““0 “‘
m1
4. Cnnfiguracién del ruuter
’I. Abra un navegadur para acceder a ‘a ‘nter‘faz pr‘nclpa‘ en ‘a web.
Escr‘ba nexxtwifitom a 192.1 68.0.1 en la barre de‘ navegador y
preslone ‘a tec‘a Ingresar en el tecladn.
2. E‘ Asistente de ‘nstalac‘fin rép‘da ‘o ayudaré a completar Ias
ccnf‘gurac‘ones de Internet. Haga c‘m en Start para Inlc‘ar 6‘
process
chk 32qu W‘zam
3 Se‘ecc‘une 3‘ two de conexién y naga c‘wc en Next para pasar a la
prfix‘ma panta“a. Para fines de esta gu‘a. se seleccinné Ia opc‘én
DHCP
Dime» when yourrnnrecuan {me
4. En esta panta“a. e5 poslb‘e conflgurar ‘a Potencla de transmls‘én. e‘
‘dent‘f‘cador SEID y la Contrasefia. Una vez que hays term‘nadn de
ccnf‘gurar estos parémetros, naga chck en Next para cant‘nuar.
em m 4;
5. AI f‘nallzar, apareceré desp‘egadn e‘ mensale de que se ha comp‘e—
tadu ‘a cunf‘guracifin Para definir Ins demés parémetrus, e‘ usuar‘o
puede hacer c“c en la upclfin Advanced [Avanzado], ta‘ Como se
w‘ustra a continuac‘én
.Au 1e : saw I» «'2‘ Manama
n... gun
ow."- _ r u.
6. La préxima vez que acceda a la interfaz de la web a través de
nexxtwifi.cum :3 192.1 83.0.1. apareceré ‘a panta“a de ‘n‘cio de
sesifin u Lngin El numbre de usuar‘u y cuntrasefia preestab‘ecidos
as admin
Nebula 1200
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.5
Linearized : No
XMP Toolkit : Adobe XMP Core 5.6-c132 79.159284, 2016/04/19-13:13:40
Create Date : 2017:03:14 13:51:19+08:00
Creator Tool : CorelDRAW X6
Modify Date : 2017:03:22 13:48:27+08:00
Metadata Date : 2017:03:22 13:48:27+08:00
Thumbnail Width : 256
Thumbnail Height : 200
Thumbnail Format : JPEG
Thumbnail Image : (Binary data 20009 bytes, use -b option to extract)
Producer : Corel PDF Engine Version 16.1.0.843
Format : application/pdf
Creator : Administrator
Title : 未命名 -2
N Pages : 1
Has Visible Transparency : True
Has Visible Overprint : True
Max Page Size W : 279.400000
Max Page Size H : 215.900000
Max Page Size Unit : Millimeters
Plate Names : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name : 默认色板组
Swatch Groups Group Type : 0
Rendition Class : proof:pdf
Document ID : uuid:c4d3f6ca-7aed-47f3-b5ae-c7e41d20ef76
Instance ID : uuid:c1b4d031-7be3-4e26-9a1f-a28122fe6124
Page Count : 15
Profile CMM Type : Lino
Profile Version : 2.1.0
Profile Class : Display Device Profile
Color Space Data : RGB
Profile Connection Space : XYZ
Profile Date Time : 1998:02:09 06:49:00
Profile File Signature : acsp
Primary Platform : Microsoft Corporation
CMM Flags : Not Embedded, Independent
Device Manufacturer : IEC
Device Model : sRGB
Device Attributes : Reflective, Glossy, Positive, Color
Rendering Intent : Perceptual
Connection Space Illuminant : 0.9642 1 0.82491
Profile Creator : HP
Profile ID : 0
Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company
Profile Description : sRGB IEC61966-2.1
Media White Point : 0.95045 1 1.08905
Media Black Point : 0 0 0
Red Matrix Column : 0.43607 0.22249 0.01392
Green Matrix Column : 0.38515 0.71687 0.09708
Blue Matrix Column : 0.14307 0.06061 0.7141
Device Mfg Desc : IEC http://www.iec.ch
Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant : 19.6445 20.3718 16.8089
Viewing Cond Surround : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type : D50
Luminance : 76.03647 80 87.12462
Measurement Observer : CIE 1931
Measurement Backing : 0 0 0
Measurement Geometry : Unknown
Measurement Flare : 0.999%
Measurement Illuminant : D65
Technology : Cathode Ray Tube Display
Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)
For : Administrator,
Bounding Box : 0 0 792 612
Container Version : 11
Creator Version : 20
Author : Administrator
Image Height : 612
Image Width : 792
Image Size : 792x612
Megapixels : 0.485
EXIF Metadata provided by EXIF.tools