NEXXT SOLUTIONS NNX300 Nyx300 Wireless-N Router User Manual Curves ARNEL304U1 Nyx300 QIG ENG 08 8 2017

User Manual

1. First determine the optimum location for the router. The best

place is usually at the center or your wireless network with the

antennas in the upright position.

2. Then, connect the modem to the WAN port of the router

using the supplied ethernet cable.

3. Connect your PC to the router if using a wired connection.

4. Insert one end of the supplied power adapter to the AC input

jack located on the rear panel of the router, before plugging the

other end to a standard electrical wall outlet.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum

distance 20cm between the radiator and your body.

This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

This device complies with part 15 of the FCC rules. Operation

is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may

cause undesired operation.