NIDEC MOBILITY 11545917 Ignition Immobilizer Transmitter User Manual
OMRON Automotive Electronics Co. Ltd. Ignition Immobilizer Transmitter
User Manual
Rn
OM
RON
AUTOMOTIVE ELECTRONICS, INC.
3709
Ohio Avenue
St. Charles, IL 60174
Telephone: 630-443-6800
FAX: 630-443-6898
The device under test
is
manufactured by the grantee (Omron Automotive
Electronics Inc.),
and
sold
as
an OEM product.
Per
47
CFR 2.909, 2.927, 2.931,
2.1033, 15.15(b) etc...,the grantee must ensure
the
end-user has all applicable I
appropriate operating instructions. When end-user instructions are reqUired,
as
in
the
case of this product,
the
grantee must notify the OEM
to
notify the end-user.
Omron
Automotive
Electronics
Inc. will supply this document
to
the
reseller/distributor dictating
what
must
be
included
in
the end user's manual for the
commercial product.
INFORMATION
TO
BE
INCLUDED
IN
THE
END
USER'S MANUAL
The
following
information
(in
blue)
must
be included In the end
product
user's
manual
to
ensure
continued
FCC and
Industry
Canada
regulatory
compliance.
The
ID
numbers
must
be
Included
in the manual
If
the
device
label
is
not
readily
accessible
to
the end user. The
compliance
paragraphs
below
must
be included
in
the user's manual.
******************************************************************************
FCC
ID:
OUC11545917 IC:850K-11545917
This device complies with Part 15
of
the FCC Rules
and
with Industry Canada IIcence-
exempt RSS standard(s). Operation
is
subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device
must
accept any interference received, including interference that
may cause undesired operation.
Le
present appareil est conforme aux CNR d'lndustrie Canada app/icables aux
appareils radio
exempts
de
licence. L'exploitation est Butorisee aux
deUx
conditions sulvantes:
(1)
l'apparell
ne
doit pas produire
de
broui/lage, et
(2)
(2)
/'utilisateur
de
/'appareil doit accepter tout brouilfage radioelectrique subi,
meme si
Ie
brouillage
est
susceptible d'en compromettre
Ie
fonctionnement.
WARNING: Changes or modifications not expressively approved by the party
responsible for compliance could void the user's authority to operate the equipment.
The term "Ie:" before the radio certification number
only
signifies that Industry Canada
technical specifications were met.
******************************************************************************