NIDEC MOBILITY CGF-H002 UNIT ASSY ANT MOD (BID R/C) User Manual Operation manual OMRON H ai

OMRON Automotive Electronics Co. Ltd. UNIT ASSY ANT MOD (BID R/C) Operation manual OMRON H ai

Users Manual

Climate SWANT MODULEFOB34CONFIGURATIONMain specificationsAfter sales service5G HW -H001M O D EL:S/No.X*******FCC ID:O U CGH W -H001-001Part namesProduct labelCN2 connectorCN1 connector (antenna connector)How to useFCC WARNING OMRON Automotive Electronics Co. Ltd. 6368 nenjyozaka, Okusa, Komaki, Aichi 485-0802 JAPANTel: +81 568 78 6392URL: http://www.oae.omron.co.jp Transmission frequency 926.85 MHzOutput power 50 mV/m (3m)Antenna Internal loading antennaSwitches Power on/off, Charge setting, Climate settingLink state acknowledgment Buzzer and LCDBattery Lithium battery (CR2032 x 2)Operation temp. range -10 C to + 70CDimensions 83.8 x 32 x 18.4 mm (Not incl. protrusion)Weight 35 g Transmission frequency 926.85 MHzOutput power 50 mV/m (3m)Power supply 5 V Current consumption 1.5 mA Antenna Printed dipole antenna Operation temp. range -30 C to + 85 CDimensions 52 x 25 x 52 mm Weight 35 g For after sales service, contact : Any changes or modifications not expressly approved by the party responsible for product compliance could void the user's authority to operate the equipment.This device complied with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause any interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.Pressing the power switch for more than 0.5 seconds turn the power of the fob on (with a buzzer sound) and the fob starts transmitting a request signal to obtain vehicleinformation. If a response signal from the vehicle is properly received, the vehicle information will be displayed on the LCD with a buzzer sound.Turning the power of the fob onYou can remotely start/stop charging with the fob. Pressing the charge switch while vehicle information is displayed on the LCD starts transmitting the setting information.*Pressing the power switch while vehicle information is displayed on the LCD shows the in-vehicle temperature. Once the setting is done and a response from the vehicle is properly received, a charging icon will be displayed (or disappeared for charging stop) on the LCD with a buzzer sound.Start/stop charging Turning the power of the fob offTurning the the air conditioner on/offPressing the power switch for more than 0.5 seconds turn the power of the fob off. Also no button operation for more than 30 seconds automatically turns the power off.You can remotely turn the air conditioner on/off with the fob. Pressing the climate switch while vehicle information is displayed on the LCD starts transmitting the setting information.*Pressing the power switch while vehicle information is displayed on the LCD shows the in-vehicle temperature. Once the setting is done and a response from the vehicle is properly received, a climate icon will be displayed (or disappeared for air conditioning off ) on the LCD with a buzzer sound.LCD Charge SWCertification labelPower SWBattery coverFOB ANTENNA MODULE 12

Navigation menu