NIDEC MOBILITY G8D-694H-A Transmitter, Keyless Entry System for vehicle User Manual G8D 649H A technical

OMRON Automotive Electronics Co. Ltd. Transmitter, Keyless Entry System for vehicle G8D 649H A technical

User manual

Download: NIDEC MOBILITY G8D-694H-A Transmitter, Keyless Entry System for vehicle User Manual G8D 649H A technical
Mirror Download [FCC.gov]NIDEC MOBILITY G8D-694H-A Transmitter, Keyless Entry System for vehicle User Manual G8D 649H A technical
Document ID1383906
Application IDx+wbnUlNVR63nssP/d1PGQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.34kB (91722 bits)
Date Submitted2010-11-30 00:00:00
Date Available2010-11-30 00:00:00
Creation Date2010-11-19 15:18:29
Producing SoftwareAcrobat Distiller 9.3.3 (Windows)
Document Lastmod2010-11-19 15:18:29
Document TitleMicrosoft Word - G8D-649H-A_technical-document.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: 13688

2. User’s manual
REMOTE TRANSMITTER
UNLOCK button
BOOT RELEASE
button
LOCK button
CALL button
You can lock and unlock your vehicle with the remote transmitter.
You don’t have to operate the receiver directly. The receiver is installed inside the vehicle and receives
the signal from the remote transmitter automatically.
LOCK
When you push the LOCK button, all the doors will lock.
You cannot lock any of the doors with the remote transmitter if any door is open or the key is in the
ignition switch.
UNLOCK
When you push the UNLOCK button , all the doors will unlock.
You cannot unlock any of the doors with the remote transmitter if the key is in the ignition switch.
POP UP
To open the boot , push the BOOT RELEASE button for approximately one second.
The boot will not open if the key is in the ignition switch.
CALL
Call mode allows you to remotely sound your vehicle’s horn to attract attention. To activate this
mode , press and hold the CALL button for about one seconds. Your vehicle’s horn will beep for about
30 seconds.
To cancel CALL mode before 30 seconds , press any button on the remote transmitter. You can also
turn the ignition switch is in ON.
-4-
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’ authority to operate the equipment.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of this device.
-5-

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 13688
Create Date                     : 2010:11:19 15:18:29+09:00
Modify Date                     : 2010:11:19 15:18:29+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : 13688
Title                           : Microsoft Word - G8D-649H-A_technical-document.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Document ID                     : uuid:5778f3a0-91bc-4209-bf9d-136333c1cc7d
Instance ID                     : uuid:f799b6dd-6fed-4a11-847d-a43eb5978124
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: OUCG8D-694H-A

Navigation menu