NINGBO BAIHUANG ELECTRIC APPLIANCES BH9912U Remote Control Socket User Manual

NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. Remote Control Socket Users Manual

Users Manual

Wireless Remote Control Socket Instruction Manual Model no.: BH9912U Please read the Instructions carefully before using the product. Features: ◆The sockets can be manually operated or via the handy Remote Control. ◆ Individual ON & OFF function for the remote control. ◆ Easy to use and operate. Use one transmitter to match more socket receivers or program more than one transmitter to each socket. Any one transmitter and socket receiver can match use after finish programming operation. So the socket receiver and remote control can sell separately. ◆The socket receiver will still remain in the “OFF” mode after a power out, even when the power comes on again. Technical data: Working Voltage for socket…………………………………..120V~/60Hz Receiver frequency…………………………………….. 433.92MHz Max.load current……………………………....................... 10A Detailed programming Operation: ■ Plug the remote controlled socket to a power point and turn the power on.■Press and hold the learning button on the right and side of the socket receiver for about 5 seconds till the LEDindicator flashes.■Release the learning button and press the preferred “ on” or “off” number button of the transmitter.■Programming successful when the LED indicator stops flashing.■The remote controlled socket is now ready to use.■Remote set up only requires one-time programming.●Pls note: The transmitter with 12V 23A battery is ready for learning operation in advance. Keep one hand pressthe Learning button on socket, the other hand holds the transmitter.NOTES: ●Make sure the battery and socket installation is firm, safe and correct.●For indoor use only, it should be installed in the places of aeration and far from high-temperature source. Make sureto avoid strong sunlight, raining and moisture places●Do not exceed the maximum load current.FCC Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment. Any change to the equipment will void FCC grant.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ●●Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. ●

Navigation menu