NINGBO BAIHUANG ELECTRIC APPLIANCES BH9938U Remote Control Switch User Manual

NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. Remote Control Switch Users Manual

Users Manual

Download: NINGBO BAIHUANG ELECTRIC APPLIANCES BH9938U Remote Control Switch User Manual
Mirror Download [FCC.gov]NINGBO BAIHUANG ELECTRIC APPLIANCES BH9938U Remote Control Switch User Manual
Document ID2630154
Application ID0XIQq2vkDYzv8TTWU/KvbQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.58kB (32257 bits)
Date Submitted2015-05-30 00:00:00
Date Available2015-05-30 00:00:00
Creation Date2015-05-25 11:38:10
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2015-05-25 11:38:10
Document TitleMicrosoft Word - BH9938U manual-_ Self-learning type_.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: baclks37

Self-learning type of Wireless Remote Control Socket Instruction Manual
Model no.: BH9938U
Please read the Instructions carefully before using the product.
Product:
This Remote Control Socket consists of one transmitter(FCC ID :Q92BHOP)
and several socket receivers(FCC ID :Q92-BH9938U)
Installation:
Install one (1) x 12V (23A) battery in the compartment of Remote Control. , make sure the installation of battery is
correct.
Features:
◆The Outlets can be manually operated or via the handy Remote Control.
◆ Individual ON & OFF function for the remote control.
◆ Easy to use and operate. Use one transmitter to match more socket receivers or program more than
one transmitter to each socket. Any one transmitter and socket receiver can match use after finish programming
operation. So the socket receiver and remote control can sell separately.
◆The socket receiver will still remain in the “OFF” mode after a power out, even when the power comes on again.
Technical data:
Working Voltage for socket…………………………………..100V-127V~/60Hz
Receiver frequency…………………………………….. 433.92MHz
Max.load current……………………………....................... 10A
Power for Remote Control………………………………………… DC12V 23A battery
Detailed Learning Operation:
All remote controlled socket units have been pre-programmed and can be used immediately.
To re-program the remote control transmitter and socket receiver, please follow instructions below.
■Plug the remote controlled socket to a power point and turn the power on.
■ Press and hold the learning button on the right and side of the socket receiver for about 5 seconds till the LED
indicator flashes.
■
■
■
■
Release the learning button and press the preferred “ on” or “off” number button of the transmitter.
Programming successful when the LED indicator stops flashing.
The remote controlled socket is now ready to use.
Remote set up only requires one-time programming.
Change the battery:
Regularly change the battery in the remote control for best use – however if you find the receivers are not responding
or the LED indicator of remote control becomes dim, then you must change the battery at the earliest available time.
Always dispose of old batteries with consideration for the environment.
NOTES:
●Make sure the battery and socket installation is firm, safe and correct.
●For indoor use only, it should be installed in the places of aeration and far from high-temperature source. Make sure
to avoid strong sunlight, raining and moisture places
●Do not exceed the maximum load current.
FCC Warning:
●Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the
user’s authority to operate the equipment. Any change to the equipment will void FCC grant.
●This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : baclks37
Create Date                     : 2015:05:25 11:38:10+08:00
Modify Date                     : 2015:05:25 11:38:10+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - BH9938U manual-_ Self-learning type_.doc
Creator                         : baclks37
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:816f23b9-ac6b-448e-97e0-8082efec9e2b
Instance ID                     : uuid:232f6442-37ca-4cdf-95a5-79d8d5d7599d
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: Q92-BH9938U

Navigation menu