NINGBO BAIHUANG ELECTRIC APPLIANCES BHD9829U Remote Control Lamp Holder User Manual BHD9829 Manual Design

Download:
Mirror Download [FCC.gov]
Document ID	3338814
Application ID	pBlmrNqmW/QKH1XRFFRubw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.23kB (227867 bits)
Date Submitted	2017-03-30 00:00:00
Date Available	2017-03-30 00:00:00
Creation Date	2017-12-28 07:33:29
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-28 07:33:29
Document Title	美规灯头BHD9829 Manual Design
Document Creator	CorelDRAW
Document Author:	Administrator

Please read and understand the instruction manual
carefully before use!
Product:
Installation:
• Install 1pc 12V(23A) Alkaline battery in the transmitter’s
battery compartment, making sure the polarity + / - of the
battery is correct.
This product consists of one or two remote transmitters with
ON and OFF function and several lamp sockets.
• Plug each lamp socket
Features:
• Each lamp socket
• Push each ON or OFF button on transmitter will turn on or
can be manually switched or via the
handy transmitter.
• Individual ON and OFF function from the remote transmitter.
• Easy to use and operate – use one transmitter to control a
into a existing light socket and
screw a lamp into each lamp socket.
off the corresponding lamp socket accordingly.
can be programmed with each other, so extra lamp sockets
and remote controls can be purchased separately and
matched to the existing unit.
Self-Learning
• Very lower standby power consumption, reduce energy
Remote Control Lamp Holder
cost when not be working
• The lamp socket
will remain ‘OFF’ after a power cut,
saving energy
ON
OFF
Re-Programming/Self-Learning Operation:
Indicator
ON
Indicator
program
button
OFF
Indicator
• Restting an lamp socket as per mentioned sections above
Lamp socket
Transmitter BH-V
Transmitter BH-U
Note: Extra buttons on transmitters can be used with
additional lamp sockets.
Notes:
• The lamp sockets are intended for indoor use only.
• The wireless range may be shortened by other electronic
devices, appliances, walls, and other physical barriers.
• DO NOT exceed the maximum load of approximately
60W.
Troubleshooting:
In the case that one lamp socket is unresponsive to a
remote control, follow the steps below to resolve the
issue:
• If the lamp socket is unresponsive to the remote control,
please refer to the ‘Resetting an lamp socket’ and ‘Reprogramming operation’ sections in the manual.
• Replace the remote batteries with new 12V (23A) batteries.
Low battery power may decrease readable wireless remote
range.
Working Voltage for socket
120V~/60Hz
• The lamp sockets are best used in areas with proper air
Transmission frequency
433.92MHz
• For your safety, make sure the batteries within the
Remote control distance
80feet (free area)
• Make sure the lamp socket and lamp are properly
• DO NOT dispose any part of this product in a fire.
• This device is not intended for use in areas with high
• Make sure that the lamp socket is placed in an area with
• For best performance, regular change the batteries in the
• Make sure the maximum load approximately 60W is not
Power for transmitter
60W
DC12V (23A) Alkaline battery
firstly
• Press the program button until indicator light starts to blink
• Release the program button, press the ‘ON’ or ‘OFF’ button
for any desired number on the transmitter.
stops blinking.
sunlight, or exposure to moisture.
Max.load power
The lamp sockets are pre-programmed for immediate use,
but maybe there are few units are not pre-programmed or
programmed incorrectly, or you want to change the pre-set
configuration to meet your needs. Please follow the steps
below:
• Programming /paring is successful when indicator light
• Avoid exposing to high-temperature sources, direct
Technical data:
button for approximately 5 seconds until the indicator
begins to flash.
socket flashes several times and stops blinking
Model No.: BHD9829U
Note: You may repeat the re-programming steps to assign
up to more lamp sockets to a single pair of buttons
on transmitter to simultaneously control multiple
lamps one time.
• Unscrew the lamp connected to the remote lamp socket.
• Turn the power off.
• Press the program button.
• Turn the power on again while continuing to press program
• Program reset is successful when the indicator on lamp
Pr oduct illust rat ion:
single lamp socket receiver or program more than one
transmitters to each lamp socket.
• Self-Learning type, any one transmitter and lamp socket
Resetting an Lamp Socket (Cancel programming):
To remove an lamp socket from all transmitter parings:
circulation.
transmitters are correctly installed before use.
humidity, such as bathrooms.
remote control.
• Discard all parts of this product in accordance with local
environmental regulations.Do not dispose in regular
household waste.
• If the remote is not in use for an extended period of time,
remove batteries.
• When cleaning, use a dry or damp cleaning cloth to wipe
the lamp socket and remote surfaces.
connected and powered on.
proper air circulation without overheating.
being exceed. If so, unscrew the lamp from the lamp
socket immediately.
• ‘ Resetting an lamp socket’ is always prior to ‘Reprogramming operation’ when you want to make some
changes.
Should you have any issues or questions regarding your
New product, feel free to contact our Customer Support
Team. Your satisfaction is ours.
FCC Warning:
Changes or modifications to this unit not expressly approved by the
party responsible for compliance will void the user’s authority to
operate the equipment. Any change to the equipment will void FCC
grant.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c870ad14-9da2-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:10 15:41:26Z
Create Date                     : 2017:07:10 15:41:26Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:c870ad14-9da2-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools