NINGBO BAIHUANG ELECTRIC APPLIANCES BHOP REMOTE CONTROL TRANSMITTER FOR SWITCHES User Manual Q92BHOP

Download:
Mirror Download [FCC.gov]
Document ID	1822525
Application ID	urDQYubsTYtqF49D1QigfQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.02kB (112752 bits)
Date Submitted	2012-10-24 00:00:00
Date Available	2012-10-24 00:00:00
Creation Date	2012-10-18 14:26:48
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2012-10-22 13:39:27
Document Title	Microsoft Word - Q92BHOP_User manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Hunk

Instruction Manual
Please read the Instructions carefully before using the product.
Product:
Remote Control Transmitter for Switches.
Model no.:
BH-O,BH-P
Installation:
Install one (1) x 12V (23A) battery in the compartment, make sure the installation of battery is correct.
Features:
◆The Outlets can be manually operated or via the handy Remote Control.
◆ Individual ON & OFF function for the remote control.
◆ Easy to use and operate. Use one transmitter to match more socket receivers or program more than
one transmitter to each socket. Any one transmitter and socket receiver can match use after finish
programming operation. So the socket receiver and remote control can sell separately.
◆The socket receiver will still rema in in the “OFF” mode af ter a power out, even when the power comes on
again.
Technical data:
Working Voltage for socket…………………………………..100V-127V~/60Hz
Transmission frequency…………………………………….. 433.92MHz
Max.load current……………………………....................... 10A
Power for transmitter………………………………………… DC12V battery
Detailed Learning Operation:
All remote controlled socket units have been pre-programmed and can be used immediately.
To re-program the remote control transmitter and socket receiver, please follow instructions below.
■Plug the remote controlled socket to a power point and turn the power on.
■ Press and hold the learning button on the right and side of the socket receiver for about 5 seconds till the
LED indicator flashes.
■ Release the learning button and press the preferred “ on” or “off” number button of the transmitter.
■ Programming successful when the LED indicator stops flashing.
■ The remote controlled socket is now ready to use.
■ Remote set up only requires one-time programming.
●Pls note: The transmitter with 12V 23A battery is ready for learning operation in advance. Keep one hand
press the Learning button on socket, the other hand holds the transmitter.
Change the battery:
Regularly ch ange th e bat tery in the remote control for best u se – how ever if you find the receiver s are not
responding or the LED indicator of remote control becomes dim, then you must change the battery at the
earliest available time. Always dispose of old batteries with consideration for the environment.
NOTES:
●Make sure the battery and socket installation is firm, safe and correct.
●For indoo r use only , it should be in stalled in the plac es of a eration an d far from high -temperature source.
Make sure to avoid strong sunlight, raining and moisture places
●Do not exceed the maximum load current.
FCC NOTE：
●This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
●THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICA TIONS T O THIS EQUIPMENT. SUCH MO DIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:10:22 13:39:27+08:00
Create Date                     : 2012:10:18 14:26:48+08:00
Metadata Date                   : 2012:10:22 13:39:27+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Q92BHOP_User manual.doc
Creator                         : Hunk
Document ID                     : uuid:f5cb18c8-78e0-49e1-aa5e-0a954afeb230
Instance ID                     : uuid:30bf5eff-f9a9-494b-8ca8-90cfcd26edee
Page Count                      : 2
Author                          : Hunk

EXIF Metadata provided by EXIF.tools