NINGBO CSTAR IMP and EXP 0002 Stretch Bluetooth Selfie Stick User Manual Manual

NINGBO CSTAR IMP&EXP; CO., LTD Stretch Bluetooth Selfie Stick Manual

Manual

Download: NINGBO CSTAR IMP and EXP 0002 Stretch Bluetooth Selfie Stick User Manual Manual
Mirror Download [FCC.gov]NINGBO CSTAR IMP and EXP 0002 Stretch Bluetooth Selfie Stick User Manual Manual
Document ID2651356
Application IDEgvnEpJWa/3M+z7BPtsgOQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize9.36kB (116943 bits)
Date Submitted2015-06-17 00:00:00
Date Available2015-06-18 00:00:00
Creation Date2015-06-15 18:27:52
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2015-06-17 17:02:53
Document TitleMicrosoft Word - 使用说明书.docx
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

Stretch Bluetooth Selfie Stick User Manual
Stretch Bluetooth Selfie
Stick Instructions:
Loading Smartphones Into the Cradle
Move the power switch to the ON position. A blue light will flash
indicating the device is ready to pair with your smart phone.
Ensure your smart phone has Bluetooth enabled.
Select “Selfie Stick” from available devices to pair. The
blue light will turn off when paired successfully.
Open the camera app on your smart phone and select the
touch screen facing camera.
Load your smart phone into the adjustable cradle. The
rubber attachment maybe required for smaller smart
phones.
Insert mobile phone into the
phone clamp by sliding or
lifting the spring loaded side
clamp.
The clamp is then affixed to
the extension arm screw.
Adjust the selfie stick to a suitable length and angle. The
button on the rubber portion of the handle can be used to
activate the shutter.
Charge:
Using the Micro USB cable included connect the selfie stick to
a computer’s USB port or a USB compatible AC wall adapter.
A red light will glow to indicate it is charging. The light will turn
off once it is fully charged.
Specifications:
Battery Capacity : 55mAH
Charging Voltage : 5V
Charging Time : 1 hour
Compatibility : Android and iOS smart phones
Made in China
Follow the instructions to
connect your smartphone
via Bluetooth.
Activate your smartphone’s
camera application.
When desired position is
reached and in focus, press
shutter button located
on the extension arm handle.
Extend the monopod via
the extension arm to desired
distance.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
‐Reorient or relocate the receiving antenna. ‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible
for compliance could void the user’s authority to operate this equipment. (Example‐ use only shielded interface
cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2015:06:17 17:02:53+08:00
Create Date                     : 2015:06:15 18:27:52+08:00
Metadata Date                   : 2015:06:17 17:02:53+08:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : Microsoft Word - 使用说明书.docx
Creator                         : Administrator
Document ID                     : uuid:22fc0508-e4b5-4838-a9e2-357990d1de9f
Instance ID                     : uuid:1a8eecdd-fb6b-46fd-9848-60ddddc549c3
Producer                        : Acrobat Distiller 7.0 (Windows)
Page Count                      : 2
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ABHA0002

Navigation menu