NINGBO CSTAR IMP and EXP 0003 Bluetooth speaker User Manual

NINGBO CSTAR IMP&EXP; CO., LTD Bluetooth speaker Users Manual

Users Manual

    Bluetooth Speaker           User Manual  Caution and Safety 1. Do not immerse in water or expose to moisture, sunlight, or heat. 2. Store in a cool and dry place. 3. Do not expose to fire. 4. Avoid excessive impact; please discontinue use if the speaker is damaged. 5. Do not disassemble the speaker; there are no user-serviceable parts inside. 6. Excessive exposure to loud sound may result in hearing damage.  Introduction The  Bluetooth  Speaker  gives  you  the  freedom  to  enjoy  your  music  anywhere. Exceptional  sound  quality  is  packed  into  this  portable  speaker.  It  is  Bluetooth version  2.1  compliant  and  is  compatible  with  mobile  phones,  tablets,  laptops, and computer systems that feature Bluetooth technology.  The  Bluetooth  Speaker can  be  used  to  conduct  phone  calls  when  you  use  the mobile phone function.  Charging the Speaker 1. Before first time use, charge the speaker for 2 hours with 5V/250mA suitable charger. 2. Plug the  supplied USB  connector into your Bluetooth  Speaker’s “Micro USB” port. Plug the  cable into a desktop computer or an  AC wall  charger. The LED light will turn  red when speaker is charging.  The  LED light  will turn off when the charging is complete.
 Bluetooth Pairing and Use Instructions 1. Press and hold button more than 3 seconds to turn on the speaker. 2. The speaker will keep and the LED light will flash blue. It is now ready to pair with your device. 3. Turn on  Bluetooth  on  your  device. Your  device  will  search for  any Bluetooth devices  in  range.  You should  select  “#2731”.  The  blue  LED  light  will  turn  off when successfully paired. 4. Music volume can be controlled by adjusting the volume on your device,   5. You can PAUSE and RESUME by pressing once button. 6. When  you  use  your  telephone  through  Bluetooth  speaker,  the  button  is  for pick up and hang up. 7. If  your  speaker  has  been  paired  previously  with  another  device  within  the effective range (30ft), then the original pairing must be removed. This is done by deleting or forgetting the Bluetooth settings of the original device. 8. If the device moves beyond the effective range, the Bluetooth connection will be disconnected. Once the device and speaker are back in effective range, you will need to again establish the Bluetooth connection between the device and the speaker. 9.   Press and hold button more than 3 seconds to turn off the speaker when you don’t use it.  Product Specifications  Model: SL010,2731  Up to 2 hours of playback time  Input: DC 5V/250mA  Charging time: 2 hours  Speaker power: 3W  Frequency response: 20Hz-20KHz  Lithium battery capacity: 250mAh  RF range: <30 ft. of wireless range  Bluetooth V2.1+EDR
  This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any  interference received, including interference that may cause undesired operation. Changes  or  modifications  not  expressly  approved  by  the  party  responsible  for compliance could void the user's authority to operate the equipment. NOTE: This equipment has  been tested  and found to comply  with the limits  for a Class  B  digital  device,  pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are designed  to  provide  reasonable  protection  against  harmful  interference  in  a residential  installation.  This  equipment  generates,  uses  instructions,  may  cause harmful  interference  to  radio  communications.  However,  there  is  no  guarantee that interference will not occur in  a particular installation. If this equipment does cause  harmful  interference  to  radio  or  television  reception,  which  can  be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that  to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu