NINGBO CSTAR IMP and EXP 0009 Smart super mini Bluetooth speaker User Manual
NINGBO CSTAR IMP&EXP; CO., LTD Smart super mini Bluetooth speaker
User manual

Smart super mini BT speaker
Function :
1, Remote shutter
2, Bluetooth speaker
3, With Mic
4, Anti-lost alarm
Instructions:
1, Operation
2.1,Power on:long press “POWER” for 3s
2.2,Power off :long press “POWER” for 3s
2.3,Remote shutter:After Bluetooth connected,open the camera in your mobile phone,
For ios phone and most Android phone,double press to take photos;some Android phones press
once to take photos,like HUAWEI
2.4, Bluetooth speaker:in Bluetooth mode ,short press “POWER” to play/pause music,
blue light will flash when playing music,and blue light keeps on when pausing
2.5, Answer phone call:in Bluetooth mode,short press “POWER” when there’s incoming calls
to answer it,and blue light flash during conversation.
2.6,one way Anti-lost:Bluetooth connected,No playing music,When the phone apart from the
speaker around 15M,the speaker will alarm again in a different buzz to warn you.
Specification:
Model:2738
BTIC: BK
BT version:Bluetooth 3.0
Effective distance: 10m
SNR: 85dB
Transmission:2.4GHZ
Output power:8Ω/1W
Battery:li-polymer 180mAh
Playtime:play music for 2H,standby 30H
Unit size:27*27*29MM
Unit weight:19g
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The users manual or instruction manual for an intentional or unintentional radiator
shall caution the user that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.