NINGBO CSTAR IMP and EXP 0016 Bluetooth earbuds User Manual 2788 HIT instruction 5 25
NINGBO CSTAR IMP&EXP; CO., LTD Bluetooth earbuds 2788 HIT instruction 5 25
User Manual
MADE IN CHINA
Super Pump Bluetooth
Earbuds 2788
Volume Up or
Next Track
Volume Down or
Previous Track
Micro-USB
Charging Port
ON/OFF Play/Stop
Answer/End Call
Technical specifications:
Bluetooth version: 4.0
Battery capacity: 100mAh
Bluetooth distance: 10 meters
Playback time: Up to 2-3 hours
Charging time: 1-2 hour
How to use the Super Pump Bluetooth® Earbuds:
• Charging: When charging, the indicator light will
turn red. When fully charged, the indicator light will
turn blue.
• Volume Up or Down: Press and hold “+” or “-”.
• Next or Previous Track: Press “+” or “-”.
• ON/OFF, Play/Stop, Answer/End Call: Press and
hold the ON/OFF button to turn the earbuds on or off.
Press the ON/OFF button to play or stop audio.
Press the ON/OFF button to answer an incoming
call. Press and hold the ON/OFF button to refuse a
call. You will hear a voice confirming these actions.
How to connect with Bluetooth:
Press and hold the ON/OFF button until the LED
indicator flashes blue. After you hear “Power ON”,
keep holding the ON/OFF button until you hear
“Pairing”. When the LED indicator light flashes red
and blue, activate your mobile phone’s Bluetooth
function and search for the Bluetooth device. Select
“Super Pump” to pair. When paired successfully, you
will hear “Successful connected”.
Safety instructions:
• Keep out of reach of children.
• Do not attempt to repair. Consult a professional if
the earbuds aren’t working properly.
• Do not insert anything other than USB cables into
the ports.
• Do not charge and use the device at the same time.
• Keep away from fire, water and extreme
temperatures.
FCC ID : 2ABHA0016
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by (ShenZhen C-Star Electronic
Tech. Co., Ltd.) is under license. Other trademarks
and trade names are those of their respective
owners.
Bluetooth Listing Declaration ID: D026370
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.