NINGBO CSTAR IMP and EXP 0025 TWLIGHT LED BLUETOOTH SPEAKER User Manual
NINGBO CSTAR IMP&EXP; CO., LTD TWLIGHT LED BLUETOOTH SPEAKER
User Manual
LIGHT
+
-
LIGHT
+
-
LIGHT
+
-
3.Recognition name
Click our Bluetooth recognition name,
then connect the speaker.
1.OPEN 2.SEARCHING
4.Play music
When Bluetooth is connected, you can
use your phone play music.
LIGHT
+
-
5.LED Light
Press once “LIGHT” to change the monochrome light.
Press 5 seconds “LIGHT” to turn into colorful light.
6.Switch / sound
Short press “+/-” to turn up/turn down the volume.
Long press “+/-” to switch to next/last song.
7.Pause/call
Press once “ ” to answer the phone.
Press twice “ ” to call the last phone number.
8.Charging
Use the Micro cable to charge.
9.Line
Use the 3.5mm AUX
cable to play music by linking to mobile phones
Put switch to “ON” to open the power. Open your Phone and search the Bluetooth. 10.OFF
Push switch to “OFF” to turn off the power.
Product Specifications
Model :
Power Output : W X 1
SNR : ≥70dB
Frequency : 2
2
0HZ-20KHz
Power Supply : DC5V
5
: 4Ω
Bluetooth v .
CT170509
Battery : 400mAh
Size : 58*58*62mm
4
Horn
ON OFF
ON OFF
ON/OFF
DC 5V
LINE-IN
ON/OFF
DC 5V
LINE-IN
ON/OFF
DC 5V
LINE-IN
ON/OFF
DC 5V
LINE-IN
ON/OFF
DC 5V
LINE-IN
ON/OFF
DC 5V
LINE-IN
ON/OFF
DC 5V
LINE-IN
ON/OFF
DC 5V
LINE-IN
ONOFF
BT SPEAKER
Long press---Switch
Short press---Sound
USER GUIDE SAFETY CAUTIONS:
1. Please read the instructions carefully before using.
2. Avoid touch with liquids; keep away from water and out of damp conditions.
3. Do not be located the speaker or cord near heat sources such as radiators,
heaters, air ducts, or direct sunlight.
4. Do not place a naked flame source such as candles on the mini Speaker.
5. Recharge the battery with suitable voltage output (5V/400mAh).
6. Do not hit the product severely or insert any conductive objects into the
speaker/ charging jack.
7. Do not block the speaker grill when the speaker is running.
8. Stop using at once if it becomes hot, smoke, burning smell,non-normal noise,
or fire is noticed coming from product.
9. Do not repair on your own. Seek the help of a professional.
10. To avoid electrical shock. Do not touch product with wet hand.
11. Keep out of reach of children.
12. Never store or use this product in temperatures below 32°F (0°C) or above
115°F (45°C)
TROUBLESHOOTING
No Sound:
1. Audio cable is not fully plugged into the 3.5mm audio part on
Device.
2. Audio cable is damaged.
3. Source of audio is not working.
4. No LED Indication when audio cable is plugged.
5. Mini speaker is out of power.
No Charge:
1. Input power source is not normal.(5V/400mAh)
2. Charging cable is not fully plugged into the charging port.
3. Charging cable is damaged.
4. Battery failure
NO LED Indication:
1. LED indication failure.
2. No battery power left.
3. Charging cable is not fully plugged into the socket.
This mini audio box can be deemed as perfect Combination of classical and
modern performance. New aluminum vibration film loud speaker which has
clear alt and pure woof, that you can take with you enjoy anywhere.
FEATURES:
1. Portable Speaker for your smartphone, tablet, laptop, or MP3
Player.
2. Lightweight, small in size but incredible sound.
3. Metal housing provides protection and a great sound.
4. UP to 2-3 hours playback time with full charge.
Components included
1. Mini speaker
2. 3.5mm Audio+Micro USB charging combination cable
3. User manual
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received,
including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
FCC ID : 2ABHA0025
Made in China
Manual for Bluetooth speaker
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction