NINGBO CSTAR IMP and EXP 0033 Bluetooth headset User Manual 2880 manual 9 20

NINGBO CSTAR IMP&EXP; CO., LTD Bluetooth headset 2880 manual 9 20

User Manual

2880
Bluetooth Headset
Power On/OFF :
1. Hold the button "Play/Pause" for about 3 seconds until the red and blue light is flashing.
2.Hold the button "Play/Pause" for 5 seconds to turn off, the light indicator then goes off.
Pairing :
FCC STATEMENT
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo
conditions:
(1)Thisdevicemaynotcauseharmfulinterference,and
(2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
Next Song (Volume Up+) Button
Charging Port
ON/OFF (Play/Pause) Button
Built-in Mic
P
roduct Specifications
Model: 2880
Up to 90 minutes of playback time
Input: DC 5V/100mA
Charging time: Approx 1-2 hours
Speaker power: 3mW
Frequency response: 20Hz-20KHz
Lithium battery capacity: 70mAh
RF range: <30 ft. of wireless range
Prev Song (Volume Down-) Button
Light indicator
1. Press the button “Play/Pause” for about 3 seconds until the red and blue lights start flashing alternately.
2. Turn on the Bluetooth function of your smartphone.
3. Search for the Bluetooth devices and select “2880”.
4. The Bluetooth headset will pair automatically.
5. If paring is successful, blue light indicator starts flashing.
Remark: You need to pair the Bluetooth headset to your smartphone for the first time. The headset
will connect to your smartphone automatically the next time when you turn it on.
Answering a call
For iPhone users:
Press the button “Play/Pause” of the headset.
Ending a call
Press the button “Play/Pause”.
Rejecting a call
Press the button “Play/Pause” for 2 seconds, then release.
Redialing the last called number
Double press the button “Play/Pause”.
Playing music
When you are listening to the music, you can press the buttons “Play, Pause, Previous Song, Next song” to
select your optimal performance and control the volume.
1. Next Song: Long press the button “Next song”.
2. Previous Song: Long press the button “Previous Song”.
3. Volume Up: Short press the button “Volume Up +”.
4. Volume Down: Short press the button “Volume Down -”.
Trouble Shooting
1. The headset can’t be charged.
Try the other USB cable or other AC adapter.
2. The headset Bluetooth devices could not be found.
Please make sure that the headphone is in pairing mode.
Press the button “Play/Pause” for about 3 seconds until the red and blue lights start flashing alternately.
undesiredoperation.
Warning:
Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliance
couldvoidtheuser'sauthoritytooperatetheequipment.
Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaclassBdigital
device,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable
protectionagainstharmfulinterferenceinaresidentialinstallation.
Thisequipmentgeneratesusesandcanradiateradiofrequenceenergyand,ifnot
installedandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio
communications.However,thereisnoguaranteethatinterferencewillnotaccorinaparticular
installation.ifthisequipmemtdoescauseharmfulinterferencetoradioortelevision
reception,whichcanbedeterminedbyturningtheequipmentoffandon,theuseris
encouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Connecttheequipmentintoanautletonacircuitdifferentfromthattowhichthereceiver
isconnectec.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
ThisdevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.Thedevicecanbe
usedinportableexposureconditionwithoutrestriction.
TheBluetooth®wordmarkandlogosareregisteredtrademarksownedbyBluetoothSIG,
Inc.andanyuseofsuchmarksby(ShenZhenC-StarElectronicTech.Co.,Ltd.)isunder
license.Othertrademarksandtradenamesarethoseoftheirrespectiveowners.
C
harging the Headset:
Recommend to charge the built-in battery fully before using the headset for the first time.
1. Connect the headset with PC/Laptop/Mac or any 5V USB adapter (not included) with
the USB cable provided.
2. Red LED turns ON during charging, turns OFF after fully charged.
General guidelines:
Keep away from high temerature or prolonged exposure to direct sunlight.
Avoid contact with liquids.
Do not disassemble.
Do not drop the product.
Keep out of reach of children.
3. Unplug USB cable after fully charged. FCC ID:
2ABHA0033
MADE IN CHINA

Navigation menu