NINGBO CSTAR IMP and EXP 0040 Musical Planter & Wireless Speaker User Manual

NINGBO CSTAR IMP&EXP; CO., LTD Musical Planter & Wireless Speaker Users Manual

Users Manual

1FlowerpotspeakerCopyright© XD P326.973
3ENGLISHCongratulations on your Bluetooth Flower pot speaker!This Bluetooth speaker allows you to enjoy your music without wires and by touching your plant, you can make a wonderful piano sound. Please read this manual before use.DEVICE LAY-OUT:1. 2.3. 4. 5.6.7.1. Power mode / Bluetooth mode2. Next / Light3. USB charging4. Water outlet5. Speaker6. Touch sensors7. Water scupper
4CHARGING THE SPEAKER:A full charge is approximately 4 hours and plays continuously for 12 hours.- Connect the speaker to the USB charging cable to charge.INSTRUCTIONS:1. Smart fun:You can make this flowerpot make a wonderful piano sound. The flowerpot plays dierent fun tunes.2. Bluetooth speaker:Switch Bluetooth mode on and instantly your flowerpot becomes a fashionable Bluetooth speaker.3. Light mode:The flowerpot has a rainbow light mode, with seven dierent colours.SMART FUN FUNCTION:A) Plant your favourite plant in the flowerpot; water them lightly to keep the soil moist.NOTE: The sensitivity of contact is dierent because of dierent plants.B) Press power mode long (1) to start the smart fun function. By touching the plant, you can make a nice piano sound. Press next (2) to switch tune. When you found your favourite tune, you have to touch the plant once and the tune will stop automatical-ly. You can finish the tune by touching the plant.
5BLUETOOTH SPEAKER FUNCTION:Press power mode shortly (1) and the flowerpot will change into a Bluetooth speaker.Pairing: To connect your speaker turn on your Bluetooth mode and connect with pairing name “flowerpot speaker” on your mobile device. When the speaker is connected successfully, the blue light goes out automatically.LIGHT MODE FUNCTION:THE KEYS MODE:Short press (2) to turn on the mood light.Press again for changing rainbow colours. Press again button (2) or turn o the light.TOUCH MODE:Press long (2) to activate the touch function mode. By touching the pot or plant the light will change.Press long again (2) again to go back to the keys mode.TROUBLESHOOTING:- Unable to boot: Check the battery for electricity, please charge, when charging the red indicator lights up and is filled with red lights.- The harps are not very sensitive: If the pot is too dry, please give the plant water properly or the sensitivity of the touch is aected by the current magnetic field under charge.
6SPECIFICATIONS:Pairing name Flowerpot speakerOutput power 5W3Wireless frequency 20-20 KHzBluetooth distance 10mBattery capacity 1200 mAhWorking voltage 3.7 VPlaying time 12 hoursCharging time 4 hoursBluetooth version 4.2 SUCCULENT PLANT-Witchford-Aloe Vera-Benth ex E.Mey etcPEPPER GRASSES- Peperomia tetraphylla- Peperomia caperata- Peperomia clusiaefoliaSANSEVIERIA- Pacers Sansevieria - Bergamot Sansevieria- Banana SansevieriaOTHERS- Murraya exotica- Sempervivum tectorum- Epipremnum aureum ADVICE PLANT:
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not accor in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an autlet on a circuit different from that to which the receiver is connectec. • Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure statement The device has been evaluated to meet general RF exposure requirement.The device can be used in protable exposure condition without restriction.

Navigation menu