NINGBO CSTAR IMP and EXP 0046 Candle light Bluetooth speaker User Manual SL249 GBS 7198 75 instruction 7 11

NINGBO CSTAR IMP&EXP; CO., LTD Candle light Bluetooth speaker SL249 GBS 7198 75 instruction 7 11

User Manual

Bluetooth Speaker and Candle Light Instruction Manual1 x Metal Speaker (SL267)1 x USB to Micro-USB Charging Cable1 x Instruction ManualPlaying time: up to 1.5hrs at max volumeCharging time: up to 2hrsPairing Name: “Candle Light ”(Be sure to fully charge the speaker before Charging the SpeakerConnect the provided charging cable to a  power source and to the micro USB port on the speaker (7).The LED indicator light will glow red when charging and turn off when fully charged.Bluetooth Setup:Press and hold Power Button(1) to turn ON the speaker, Bluetooth LED Indicator(6) will Turn on the Bluetooth function on mobile device, Select “Candle Light ” pairing name. LED will flash slowly BLUE if successfully paired.Speaker will automatically pair if the mobile device has been paired before.Press and hold Power Button(1) to turn off the device.Playing Music:Short press “Play/Pause” key to pause music. A second short press will resume playing music again.“Vol+/Next track”:Short press - next track.Long press - increase volume.“Vol-/Previous track”:Short press - previous trackLong press - reduce volume 1.   •3.   •      •        •   •4.   •   •       •  1.2.3.4.5.6.7.8.•••Long press to power on/off+short press to pause.Long press 1 times to open candle lamp brightness 50%, and then long press brightness 100%, and then long press off candle light.Short press to play the last song, long press to decrease the volume.Short press to play the next song, long press toincrease the volume.Charging indicator red LED.Charging indicator blue LED.Micro USB port.Speaker.9. Candle light.What’s included:Functions:Instructions:WARNING-When using this product, basic precautions should always be followed:Read all the instructions before use.Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C). To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not expose the device to moisture.Do not use the device if damaged or explosion or risk of injury. Do not disassemble the device. For professional. Incorrect reassembly may or temperatures above 104°F may cause explosion.use only identical replacement parts to ensure product safety•1.2.3.4.5.6.7.8.9.SAFETY PRECAUTIONS:MADE IN CHINA561 2 3 4789MSL267
FCC Statement  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This  device  must  accept  any  interference  received,  including  interference  that  may cause undesired operation. 2.          Changes  or  modifications  not  expressly  approved  by  the  party  responsible  for compliance could void the user’s authority to operate the equipment.   Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.      This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not accor in a particular  installation.if  this  equipmemt  does  cause  harmful  interference  to  radio  or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:    •          Reorient or relocate the receiving antenna. •     Increase the separation between the equipment and receiver. •          Connect the equipment into an autlet on a circuit different from that to which the receiver is connectec. •          Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.

Navigation menu