NINGBO DOOYA MECHANIC and ELECTRONIC TECHNOLOGY DM25LE-S DC Tubular motor User Manual
NINGBO DOOYA MECHANIC & ELECTRONIC TECHNOLOGY CO., LTD. DC Tubular motor
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2815142 |
| Application ID | dXvbSNpTK9Cnlt1MBvTV5g== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 44.33kB (554147 bits) |
| Date Submitted | 2015-11-18 00:00:00 |
| Date Available | 2015-11-19 00:00:00 |
| Creation Date | 2015-11-13 11:04:22 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-11-13 11:47:37 |
| Document Title | User Manual |
| Document Creator | Adobe Illustrator CS5 |
| Document Author: | Lai hong tao |
Repeat setting,function is cancelled; In the dot-move mode,it will move when you loose the button Dot-move setting Additional function P2×1 Up×1 Beep once Run for hint DM25LE Down×1 Beep once Run for hint Beep 2 times Run for hint OK Tubular Motor Specification Dot move setting is ok Power on Emitter a is the one already matched code, while emitter b has not Add Emitter Emitter Additional function P2×1 P2×1 Be eep once Beep Run Ru un for hint Technical support Technical support P2×1 once Beep once Run for hint Version NO. : A/05 Beep 7 times Run for hint If the voltage is less than 10v, the motor will alarm for 10 times to prompt it needs to be charged every time when the motor is working. Technical support ᴺIt's strictly prohibited to beat the motor in transport ,storage, installation and use process. Please minimize the motor vibration. ᴻIt suggests need recharging please charge the battery for 3 hours and make sure itis fully charged before the first use. please charge the battery every 6 months OK E itter Emitter Em adding add ding ok iss o Effective transmitting distancemay have deviation due to actual environment Control range Rolling Rolling DM25LE Tubular Motor With the same method,you only can delete the emitter b not the emitter a Delete Dele ete e one emit emitter tte er P2×1 Additional function P2×1 Beep once Run for hint Beep 5 times Run for hint Additional function OK The b emitter is deleted Power on Stop button ×1 Beep once Run for hint Beep 5 times Run for hint L1 open L2 partition 200m 35m Emission frequency 433.92/868 MHz Matchable emitter DC305A Single-channel emitter P2×1 P2× ×1 Beep once Run for hint 12V Technical support To clean up the emitter means deleting me emory of emitter and limit all the memory sw witch in the motor receivers switch Delete Dele ete em emitter mitte er P2×1 L2 ᴺ Please set the limit position before use. ᴻ When in the group control mode,the setting up,deleting programme,setting limit are unworkable. P2×1 Beep once Run for hint L1 One motor maximum can store 20 channels, over 20 channels, if still need add new emitters, it will be repeating covered last channel. DC306A 5-channel emitter DC313A 15-channel emitter DC1650 Single-channel emitter DC1651 Double-channel emitter DC1600 Single-channel emitter DC1602 15-channel emitter DC476A Portable 9-channel emitter DC1653 15-channel LCD emitter OK The emitters all deleted DC287 Single-channel emitter Additional function Delete limit P2×1 ×1 Down×1 Beep p once Run for hint Beep once Run for hint P2×1 Beep 4 times Run for hint DC288 5-channel emitter DC289 15-channel emitter Button specification Technical support OK E:Electronic / The limit is deleted Electronic limit + Built-in receiver DC262 15-channel emitter DC316A Portable ble doublechannel nel emitter Press the set button on limit head once,the motor run upward,press the set button on limit head once,the motor will stop,press the set button on limit head again,the motor will run downward Long press the set button on limit head for more than 6s, the motor will run for hint,loose it, the motor will beep 2 times ,then motor direction has been changed with the same limits as before; Long press the set button on limit head for more than 11s, the motor will run for hint,loose it, and beep 3 times ,then it will delete every memory and restore the factory settings;Restore factory settings, the first use of the motor, long press setting button; Setting button Connected chargers Setting button Connected chargers Up Stop Down Setting button （P2） A Forbidden drill through crown and inner gear wheel Crown installation Additional function If the motor already experienced experie match code, memory the me emory will be cleared if do it again to the If you have matched the codes,connect co power, the motor will work normally, if not,the motor will w beep 1 time and turn tur to remind you entry During the settings, the time between two operation must be shorter than 6s, otherwise it will quit the setting Setting up Additional function Up×1 Beep 6 times Run for hint P2×1 Crown Beep once Run for hint Set up is ok. The up limit button control the motor clockwise. Beep once Down×1 Beep 6 times Run for hint Press setting button of the motor for 2s.loose it OK Set up is ok. The down limit button control the motor clockwise. Drive adapter installation Additional function Set up / down limit position ķ It is invalid when the up limit and down limit are at the same location ĸ After limit settingˈwith power and memory function; Ĺinto the match-code status 2 minutes later, it will quit out the setting limits status automatically ᴺIn the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor will be under the step-moving status,press the setting button again to quit the step-moving status ᴻThe step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted more correctly Additional function P2×1 P2×1 ×1 Up×1 Bee Beep ep once Run n for hint OK P2×1 Beep once Up×1 Confirm the Blind to stop in the up limit position Bracket installation Additional function Stop×5 Stop×1 The up limit point Beep 4 times Run for hint Beep once Run for h hint Down×1 The motor stops Stop×5 Stop×1 Run for hint Run for hint The down limit point Confirm the Blind to stop in the down limit position Beep once everytime Rechargeable Description Beep once everytime The motor stops The third limit position setting Additional function OK Setting is ok ķ After the up limit and down limit setting, you can set the third limit point between them as the half open position;ĸ The third limit point will be cancelled as the cancellation of limit and code matching;ĹLong press the stop button for 3s,the roller blinds will move to the third limit, if the motor is in the dot-move status, long press the stop button for 3s,the motor will move to the down limit firstly, then move to the third limit. The third limit position setting Additional function Stop×1 The motor has a built-in battery,using the charger DC264(1.0Nm and 1.1Nm motor) to recharge.You can also use solar panels DC683B to charge;when the battery is low, insert the charge,charger light shows red light.batteries is full when the red light turns to green. DC264 P2×1 Stop×1 Beep once Run for hint The up limit position Stop×1 Stop× ×1 Beep once Run for hint Beep 3 times Run for hint The third limit position （any position） ） The e down limit position Already set up, down limit position Every time interval in not less than 1 second stops The motor sto op ps The third limit position cancelled Beep once Run un for hint DC683B Stop×1 Stop× ×1 Stop×11 Stop× P2×1 Beep once for Run fo or hint Beep 3 times Run for hint OK Setting is ok Power on OK Setting is ok FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Lai hong tao Create Date : 2015:11:13 11:04:22+08:00 Modify Date : 2015:11:13 11:47:37+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Original Document ID : xmp.did:558769CCB4B1E011ACB4A5E39143CB33 Instance ID : uuid:6ffc0122-eb74-4658-bf91-fd65d55ec62a Document ID : xmp.did:97992E911555E111B1ECF1B5E7A18CA7 Rendition Class : proof:pdf History Action : saved, converted, saved, converted, converted, converted, saved, converted, converted, converted, converted, saved, converted, converted, converted, converted, converted, converted, converted, converted, saved, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, saved, saved, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, saved History Instance ID : xmp.iid:558769CCB4B1E011ACB4A5E39143CB33, xmp.iid:E1123D3970B2E0118B1ADBFE2351E6ED, xmp.iid:8AF1C562F5B7E011B37F8CE7711E3D17, xmp.iid:53E5ED0713FAE0119FE9C3CE04BF2F56, xmp.iid:3BFD3D5011BCE111B59CC34AA7740B65, xmp.iid:A786D36C59C3E21198C690295585F538, xmp.iid:A0E96C41E3CFE211AE1C8F91C286691E, xmp.iid:97992E911555E111B1ECF1B5E7A18CA7 History When : 2011:07:19 11:11:30+08:00, 2011:07:20 09:33:08+08:00, 2011:07:27 16:14:36+08:00, 2011:10:19 15:18:17+08:00, 2012:06:22 13:43:13+08:00, 2013:05:23 11:32:41+08:00, 2013:06:08 14:25:14+08:00, 2012:02:12 09:18:10+08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, /, /, /, /, / History Parameters : from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator Derived From Instance ID : xmp.iid:A0E96C41E3CFE211AE1C8F91C286691E Derived From Document ID : xmp.did:A0E96C41E3CFE211AE1C8F91C286691E Derived From Original Document ID: xmp.did:558769CCB4B1E011ACB4A5E39143CB33 Derived From Rendition Class : proof:pdf Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : 080121-1441.tif, DC1600_单通道02.jpg, DC1600_单通道02.jpg, 080121-1441.tif, 080121-1441.tif, 080118.tif, DC1600_单通道02.jpg, DC1600_单通道02.jpg, DC1600_单通道02.jpg, DC1600_单通道02.jpg, 080121-1441.tif, DC1600_单通道02.jpg, DC1600_单通道02.jpg, DC1600_单通道02.jpg, DC1600_单通道02.jpg, 080121-1441.tif, 080121-1441.tif Format : application/pdf Title : eDM25LE说明书-A-05 Creator : Lai hong tao Metadata Date : 2015:11:13 11:47:37+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 212 Thumbnail Format : JPEG Thumbnail Image : (Binary data 16303 bytes, use -b option to extract) Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 29.700013 Max Page Size H : 21.000010 Max Page Size Unit : Centimeters Font Name : STHeiti, HiraginoSansGB-W6, AdobeSongStd-Light, STXihei, Skia, Skia-Regular Font Family : 华文黑体, Hiragino Sans GB, Adobe 宋体 Std, 华文细黑, Skia, Skia Font Face : Regular, W6, L, Regular, Regular, Regular Font Type : TrueType, Open Type, Open Type, Open Type, TrueType, TrueType Font Version : 5.0d2e1, Version 3.02, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895, Version 1.02, Version 1.0, 3.1.2b8 Font Composite : False, False, False, False, False, False Font File Name : STHeiti.ttf, Hiragin2.otf, AdobeSongStd-Light.otf, STXIHEI.TTF, Skia_0.ttf, skia_regular1.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: 25% Yellow Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 0.000000 Swatch Groups Colorants Magenta : 0.000000 Swatch Groups Colorants Yellow : 25.000000 Swatch Groups Colorants Black : 0.000000 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 3EXIF Metadata provided by EXIF.tools