NITGen ENBIOGATE Multi-Biometrics System User Manual eNBio Gate User s Manual ENG

NITGen Co., Ltd. Multi-Biometrics System eNBio Gate User s Manual ENG

USERS MANUAL

Total Biometric Solution ProvidereNBio GateUser’s ManualV1.0
1.1 Connection1.2 NoticesChapter 1. Installation
Video signal CableAudio signal CableParallel & PS2USB cable100/240 VAC* Connect the connectors like the upper picture.1.1 ConnectionRemote controller
1. Don’t change the USB port after the first installation into the user PC.2. You must connect cables while the power of PC is OFF and the eNBioGate power is also OFF.3. You have to install the eNBio Gate in the place without strong backlight. It can make the camera movement error.4. Don’t disassemble eNBio Gate without NITGEN’sapproval. If do, you cannot have the A/S from us.1.2 Notices
2.1 Enrollment2.2 Verification2.3 DB SeachChapter 2. Usages
Language SettingYou can choose the user interface language with You can choose the user interface language with buttons in the red circle in the upper Exit/Entry System buttons in the red circle in the upper Exit/Entry System UI.UI.2.1 Language Setting
User data enrollmentEnter a userEnter a user’’s data in the upper Exit/Entry System User s data in the upper Exit/Entry System User Interface. If you adopt Interface. If you adopt ‘‘Passport readerPassport reader’’, you can enter , you can enter them automatically.them automatically.2.2 Enrollment
Face EnrollmentYou can capture or delete a face image with the You can capture or delete a face image with the ‘‘Capture FaceCapture Face’’and and ‘‘Delete FaceDelete Face’’buttons in the red buttons in the red circle of the circle of the ‘‘Exit/Entry SystemExit/Entry System’’User Interface. And User Interface. And you can write the face template with the you can write the face template with the ‘‘Capture FaceCapture Face’’button.button.You can adjust camera heights automatically by You can adjust camera heights automatically by pressing pressing the the ‘‘AutoAuto’’button on the remote controller and manually button on the remote controller and manually with the with the ‘‘UpUp’’and and ‘‘DownDown’’buttons.buttons.2.2 Enrollment
Fingerprint EnrollmentEnroll the fingerprint template by using the Enroll the fingerprint template by using the ‘‘Issue Issue fingerprintfingerprint’’circled by red line in the upper UI.circled by red line in the upper UI.2.2 Enrollment
Enrollment Verification2.2 EnrollmentThe upper picture is the state of the end of enrollment.The upper picture is the state of the end of enrollment.
Face Verification2.3 VerificationIf you enter User Data or scan passport in the reader in If you enter User Data or scan passport in the reader in verification mode, face and fingerprint verification is verification mode, face and fingerprint verification is executed automatically in the turn.executed automatically in the turn.
Fingerprint Verification 2.3 VerificationIf the message If the message ““Place your fingerPlace your finger””is happen, place is happen, place user fingers to the fingerprint sensors in the turn.user fingers to the fingerprint sensors in the turn.
Black List Search for Fail2.3 VerificationIf the Verification result is fail, the message If the Verification result is fail, the message ‘‘The The verification is failverification is fail’’is displayed. You can search the is displayed. You can search the candidates by using searching Button in the upper UI.candidates by using searching Button in the upper UI.
Enrollment Log Search2.4 Log DBYou can search Enrollment Log data for the various You can search Enrollment Log data for the various cases with the option check boxes in the upper picture.cases with the option check boxes in the upper picture.
Verification Log Search2.4 Log DBYou can search Verification Log data for the various You can search Verification Log data for the various cases with the option check boxes in the upper picture.cases with the option check boxes in the upper picture.
FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. - Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Navigation menu