NITGen T2 Access controller User Manual AC7000 UserGuide 1 0
NITGEN Co., Ltd. Access controller AC7000 UserGuide 1 0
NITGen >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3112099 |
| Application ID | qK4mAbcAj0rUkXq+vJCFdA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 183.1kB (2288798 bits) |
| Date Submitted | 2016-08-25 00:00:00 |
| Date Available | 2017-02-21 00:00:00 |
| Creation Date | 2016-08-18 16:30:24 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2016-08-18 16:30:24 |
| Document Title | AC7000_UserGuide_1.0 |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | iddol |
eNBioAccess-T2 User Guide Version eng-1.10 © Copyright 2013, NITGEN Co., Ltd. All rights reserved. It is strictly prohibited to compile, duplicate or publish part. or whole of this manual prior written consent of NITGEN. The specification of this product may be changed without prior notice to improve its functionality. The logo of NITGEN&COMPANY is a registered trademark of NITGEN Co., Ltd. Other names or trademarks are registered trademarks of their respective owners. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 2 eNBioAccess-T2 User GuideVersion Date Description Firmware Version 1.00 2016-07-15 Initial Release 1000-01 1.10 2016-08-17 Modified the description for icon information. 1000-02 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide Administrator (Admin) - The administrator can access the terminal menu mode. He/she has the authority to add/modify/delete terminal users and to change the operating environment by changing settings. - If there is no registered administrator in the terminal, anybody can access to the terminal menu and change settings. It is recommended that more than one administrator will be necessarily registered in the terminal. - The administrator has the authority to change critical environmental settings of the fingerprint reader. So, special attention is required to its registration and operation. 1:1 Authentication - The user fingerprint is verified after entering User ID or Card. - Only User ID or the user fingerprint registered to the card is compared. This is called One-to-One Authentication. 1: N Identification - The user is searched only by the fingerprint. - The same fingerprint as the input fingerprint is identified among the registered fingerprints without User ID or Card entered. This is called One-to-N Identification. Authentication Level - As a level used for fingerprint authentication, it is displayed in Step 1 to 9. Authentication cannot be allowed before the degree of match between two fingerprints is higher than the set authorization level. - The higher authentication level may ensure the higher security. But it requires the relatively high concordance rate. When authenticating User ID, it high likely to deny authentication. - 1:1 Level: Authentication level applied when 1:1 authentication - 1: N Level: Authentication level applied when 1: n authentication Authentication Method - It refers FP(Fingerprint)Authentication, RF(Card)Authentication and a various types of authentication methods made by each of a combination. LFD (Live Finger Detection): Fake fingerprint prevention function - The LFD allows only actual fingerprints to be entered, except for any fake fingerprints made of rubber, paper, film, and silicon and the like. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 4 eNBioAccess-T2 User Guide Table of Contents 1. Before Getting Started ................................................................................. 6 1.1. 1.2. Safety Notes ........................................................................................................ 6 Product Details ................................................................................................... 7 1.2.1. FRONT ...................................................................................................... 7 1.2.2. REAR ......................................................................................................... 8 1.2.3. Input / Output ............................................................................................. 9 1.3. Screen information during operation .............................................................. 12 1.3.1. Initial Screen ............................................................................................ 12 1.3.2. Icons ........................................................................................................ 12 1.3.3. Function KEY ........................................................................................... 13 1.3.4. Main Screen ............................................................................................. 13 1.4. LED information during operation ................................................................... 15 1.5. Voice information during operation................................................................. 15 1.6. Buzzer guide announced during operation .................................................... 15 1.7. How to register and enter the correct fingerprint ........................................... 16 2. Product Descriptions ................................................................................. 17 2.1. 2.2. Product Features .............................................................................................. 17 Diagram ............................................................................................................. 18 2.2.1. Single Type (Door Lock) ........................................................................... 18 2.2.2. Single Type (Lock Controller) ................................................................... 18 2.2.3. Dummy Type (MCP040) ........................................................................... 18 2.2.4. Network Type (Door Lock)........................................................................ 19 2.2.5. Network Type (Lock Controller) ................................................................ 19 2.3. Product Specification ....................................................................................... 20 3. Environment Setting .................................................................................. 21 3.1. Checkpoints before Environment Setting ....................................................... 21 3.1.1. Menu ........................................................................................................ 21 3.1.2. Administration authentication ................................................................... 21 3.1.3. How to access the menu without administrator authentication ................. 22 3.1.4. Save Default Setting ................................................................................ 22 3.1.5. Default Setting ......................................................................................... 23 3.1.6. Setting guide for Network Configuration ................................................... 24 3.2. How to register the terminal in Admin App ..................................................... 27 3.2.1. Install iAccess M Plus................................................................................ 27 3.2.2. Execute and Log in iAccess M Plus ........................................................... 27 3.2.3. Access to Terminal BLE REDAY ................................................................. 27 3.2.4. Terminal login Admin App ......................................................................... 28 3.2.5. Administrator authentication of the terminal ............................................ 28 3.2.6. Terminal registration................................................................................. 28 3.3. Access Device with Admin App ....................................................................... 29 3.4. Access and Registration between ACM Pro and terminal ............................. 30 3.4.1. Install ACM Pro ......................................................................................... 30 3.4.2. Execute ACM Pro ...................................................................................... 30 3.4.3. Set in terminal .......................................................................................... 31 3.4.4. LAN connection in terminal ....................................................................... 31 3.4.5. Register the terminal in ACM Pro .............................................................. 32 3.5. Menu Configuration .......................................................................................... 33 3.6. USER ................................................................................................................. 39 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 3.6.1. Menu Configuration .................................................................................. 39 3.6.2. ADD.......................................................................................................... 39 3.6.3. AUTO ADD................................................................................................ 41 3.6.4. MODIFY .................................................................................................... 42 3.6.5. DELETE .................................................................................................... 43 3.6.6. DELETE ALL.............................................................................................. 43 3.7. Network Menu ................................................................................................... 44 3.7.1. Menu Configuration .................................................................................. 44 3.7.2. AUTH Mode .............................................................................................. 45 3.7.3. Terminal ID .............................................................................................. 45 3.7.4. Terminal ................................................................................................... 46 3.7.5. Server....................................................................................................... 47 3.8. Option Menu...................................................................................................... 47 3.8.1. Menu configuration .................................................................................. 47 3.8.2. ATTEND .................................................................................................... 48 3.8.3. Screen ...................................................................................................... 49 3.8.4. SAVE ........................................................................................................ 52 3.8.5. TIMEOUT.................................................................................................. 53 3.8.6. LOCKING .................................................................................................. 54 3.9. INT DEVICE ....................................................................................................... 55 3.9.1. Menu Configuration .................................................................................. 55 3.9.2. FP SENSOR ............................................................................................... 55 3.9.3. BEEP......................................................................................................... 57 3.9.4. VOICE ...................................................................................................... 57 3.9.5. BLE ........................................................................................................... 57 3.9.6. TAMPER .................................................................................................... 58 3.10. EXT DEVICE ...................................................................................................... 59 3.10.1. Menu Configuration .................................................................................. 59 3.10.2. DOORLOCK............................................................................................... 59 3.10.3. RS485....................................................................................................... 63 3.10.4. WIEGAND ................................................................................................. 64 3.11. STATUS.............................................................................................................. 67 3.11.1. Menu Configuration .................................................................................. 67 3.11.2. DB INFO ................................................................................................... 67 3.11.3. NETWORK ................................................................................................ 67 3.11.4. OPTION .................................................................................................... 68 3.11.5. INT DEVICE .............................................................................................. 68 3.11.6. EXT DEVICE ............................................................................................. 68 3.11.7. I/O PORT.................................................................................................. 69 3.11.8. VERSION .................................................................................................. 69 3.12. RECOVERY ....................................................................................................... 70 3.12.1. Menu Configuration .................................................................................. 70 3.12.2. INITIALIZE ............................................................................................... 70 3.12.3. SELF TEST ................................................................................................ 72 3.12.4. BACKUP .................................................................................................... 75 3.12.5. REBOOT ................................................................................................... 77 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 6 eNBioAccess-T2 User Guide 1. Before Getting Started 1.1. Safety Notes Warning Do not operate the terminal with wet hands, and pay attention not to let any liquid such as water enter inside the terminal. - > Otherwise, malfunction or electric shock may be caused. Do not disassemble, repair or remodel the terminal at your disposal. - > Otherwise, it may cause malfunction, electric shock, or a fire. Keep the terminal away from inflammables. - > Otherwise, it may cause a fire. Do not allow children to touch the terminal carelessly. - > Otherwise, it may cause safety accidents of children or malfunction. - Non-compliance of safety notes may cause death or serious injury for users. Cautions Do not install the terminal in a place exposed to direct sunlight. → Otherwise, it may cause malfunction, deformation and discoloration. Do not install the terminal in humid or dusty places. → Otherwise, it may cause malfunction. Do not clean this terminal by sprinkling water, nor wipe it with benzene, thinner, and alcohol. → Otherwise, it may cause electric shock or a fire. Keep the terminal away from magnets. → Otherwise, it may cause failure and malfunction. Keep the fingerprint input section clean. → Otherwise, the fingerprint cannot be recognized correctly. Do not spray insecticides or inflammables on the terminal. → Otherwise, it may cause deformation and discoloration. Keep the terminal away from shock or sharp objects. → Otherwise, it may damage the terminal and result in malfunction. Do not install the terminal in a place where there is a severe change in temperature. → Otherwise, it may cause malfunction. - Non-compliance of safety notes may cause personal injury or property damage for users. ※ We are not responsible for any accidents and damage that may arise from noncompliance of the information in this manual. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 7 eNBioAccess-T2 User Guide 1.2. Product Details 1.2.1. FRONT BLE embedded State LED Camera LCD Function KEY (F1~F4) Speaker Fingerprint Sensor Card Sensor (EM/SC/HID) USB assist device (UDL10) connection 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 8 eNBioAccess-T2 User Guide 1.2.2. REAR Fixed bracket Cable harness 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 1.2.3. Input / Output 1.2.3.1. Cable & Connector 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 10 eNBioAccess-T2 User Guide 1.2.3.2. Pin Details Pin number Line color Label Explanation IN/OUT Note (Line name) ORANGE YELLOW GREEN BLUE BLACK EXT DM0 DM1 DM2 GND Inside open DoorMonitor0 DoorMonitor1 DoorMonitor2 GND IN IN IN IN RED BLACK 5V PGND DC5V Power GND OUT 10 11 12 13 14 GREEN BLUE ORANGE YELLOW BROWN PURPLE BLACK R4A R4B WO0 WO1 WI0 WI1 GND RS485A RS485B WIE_OUT0 WIE_OUT1 WIE_IN0 WIE_IN1 GND BI BI OUT OUT IN IN 15 16 17 18 19 RED BLACK GREEN WHITE RED 12V N_TXN N_TXP N_RXN N_RXP DC12V OUT OUT IN IN IN 20 BLACK GND Power GND 21 22 23 24 25 26 RED GRAY BROWN WHITE PURPLE BLACK 12V L1C L1NC L1NO L2 GND DC12V LOCK1_COM LOCK1_NC LOCK1_NO LOCK2 GND OUT OUT OUT OUT OUT 27 BLACK PGND Power GND 28 BLACK PGND Panel GND Connect to Exit button Sense door state(DM0) Sense door state(DM1) Sense door state(DM2) Ground connection(for door monitor) DC 5V output Power supply ground connection RS-485 interface RS-485 interface Output WIGAND (WO0) Output WIGAND (WO1) Input WIGAND (WI0) Input WIGAND (WI1) Ground connection (WIGAND signal) LAN I/F (LAN cable) LAN I/F (LAN cable) LAN I/F (LAN cable) LAN I/F (LAN cable) DC 12V power supply input Power supply ground connection (Adapter) DC 12V put out power Lock1 COM terminal Lock1 NC terminal Lock1 NO terminal Lock2 terminal Ground connection (Lock connecter) Power supply ground connection (Lock power) Panel ground connection (Earth) 1.2.3.3. Terminal <- > MCP040 wiring Category RS485A RS485B ground connection T2 terminal (Line name) R4A (green) R4B (blue) GND (black) 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com MCP040 (Terminal name) RDRA+ RDRAG 11 eNBioAccess-T2 User Guide 1.2.3.4. Terminal <- > LC015B wiring Category T2 terminal (Line name) LC015B (Terminal name) RS485A R4A (green) 485A RS485B R4B (blue) 485B ground connection GND (black) GND DC12V (LC015B separate power DC12V IN supply) ground connection (Power only GND for LC015B) But, door open time can be set with DIP SWITCH of LC015B (Maximum open time is 5 sec.) 1.2.3.5. Terminal <- > EM Type Door Lock wiring Category Lock GND Door Monitor T2 terminal (Line name) L1NC (Green) GND (Black) DM0 (Black) 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com EM Door Lock (Terminal name) NC 12 eNBioAccess-T2 User Guide 1.3. Screen information during operation 1.3.1. Initial Screen When powering on at first, the screen is displayed as follow. Operation Mode State icon TNA Mode Date and Time 1.3.2. Icons NONE : No use network : LAN line is disconnected. Server connection State : LAN line is connected. (Only link is connected.) : Connected with server : Gate is closed. : Gate is opened. Gate State : Gate is opened forcedly(unusual door open state) : Gate communication problem : Emergency Exit opened (Continuous door open state by user settings) Warning signal State NONE Fire detection State NONE BLE connection State NONE MCP040 connection State UDL connection State : Normal : Terminal Disassembly State : Normal : Sensed by fire detector(Valid on DM2 fire set) : Disconnected with Admin App : Connected with Admin App NONE : Connected with Admin App : Not MCP040 mode : MCP040 mode & Bad communication state NONE : UDL is not used (Normal state). : UDL is connected. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 13 eNBioAccess-T2 User Guide 1.3.3. Function KEY Icon Meaning Function Key Explanation UP F1 Move cursor up. DOWN F3 Move cursor down. LEFT ESC RIGHT F2 F2 long F4 F4 long or F4 Move cursor to left. Move to upper menu. Move cursor to right. F2 Category choice (ENABLE or DISABLE). ENTER ENABLE DISABLE Move to submenu. 1.3.4. Main Screen Operating in Exclusive mode Initial Screen Operating in Network mode Initial Screen Operating in Dummy mode Initial Screen Operating in lock mode (Reject all users authentication) 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide Menu of Initial Screen Authentication succeess Authentication failure Waiting for Card Input Waiting for Fingerprint Input Waiting for Admin App registration 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 14 15 eNBioAccess-T2 User Guide 1.4. LED information during operation LED RED Operating state Normal Alarm Remark OFF ON or Flash ON (Maintain during authentication time) OFF OFF ON (Maintain during authentication time) OFF Flash at intervals of 5 seconds Authentication Failure Normal GREEN BLUE Function Key LED Authentication Success Terminal Normal(alive) Waiting Fingerprint / Card Flash 200msec input Enter menu Always ON Touch in initial screen. ON(Maintain for 10 seconds) OFF 1.5. Voice information during operation Category Voice information Fingerprint Input Please enter your fingerprint. Authentication success Authentication failure You are authorized. Please try again. 1.6. Buzzer guide announced during operation Buzzer Sound State Explanation Ppik Key touch Card tag Fingerprint touch -Pressing key or reading card -When inputting fingerprint, input has been completed and hands can take off. Ppibik Failure If authentication fails or the user's input is wrong Ppiriririk Waiting for input It shows the state for waiting user’s input such as fingerprint or password. Ppiririk Succeess Authentication completion 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com success or setting eNBioAccess-T2 User Guide 16 1.7. How to register and enter the correct fingerprint Correct fingerprint input method Enter your fingerprint as if you take a thumbprint by using your forefinger if possible. The fingerprint cannot be correctly registered and entered only by your fingertips. The center of the fingerprint should be touched with the fingerprint input section. Enter the fingerprint of your forefinger if possible. When using your forefinger, you can enter your fingerprint correctly and safely. Make sure that the fingerprint is unclear or wounded. Too dry, wet, blurry or wounded fingerprints are difficult to recognize. In this case, the fingerprint of another finger should be registered. Precautions subject to your fingerprint state. The availability of the fingerprint may vary subject to your fingerprint state. This product consists of a fingerprint recognition system and cannot recognize the damaged or unclear fingerprints. The fingerprint should be registered using the RF card. If your hands are dry, you can blow your breath on the system to operate it more smoothly. For children, too small or unclear fingerprints may be difficult or impossible to use. They need to register a new fingerprint every six months. For seniors, the fingerprint with too many lines may not be registered. It is recommended that you will register more than two fingerprints if possible. In order to increase the fingerprint authentication rate, it is recommended to use six of the ten fingers as illustrated below (both thumbs, forefingers, middle fingers). 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 17 2. Product Descriptions 2.1. Product Features BLE is equipped. Door Control with smartphone is possible at close range. It is equipped with Color Camera, and it saves the visitor’s video when authentication succeeds or fails. Optional, Available to use as RF(128.4 kHz), Smart Card(13.56 MHz), HID Reader Easy to verify your ID via fingerprint - The use of the fingerprint recognition technology (Biometrics) can prevent forgetting your password, losing your card or key, or avoid the risk of their theft. The use of personal fingerprints enhances the security of authentication. Access control system using the local area network (LAN) - The fingerprint reader communicates with the authentication server using a TCP/IP protocol. Therefore, this terminal can be applied to the existing LAN and has easy expandability. It ensures a fast speed by 10/100 Mbps Auto Detect and facilitates management and monitoring via the network. Provide various registration and authentication method Fingerprint Fingerprint registration Fingerprint authentication Card Card registration Card authentication Card or Fingerprint Card, Fingerprint registration Card or Fingerprint authentication Card and Fingerprint Card, Fingerprint registration Fingerprint authentication after Card authentication Mobile card Mobile Card registration (registration only via server and admin App) Mobile Card authentication 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 18 eNBioAccess-T2 User Guide 2.2. Diagram 2.2.1. Single Type (Door Lock) Close BLE 2.4G Mobile App Lock control Open T2 Door Lock 2.2.2. Single Type (Lock Controller) Close RS485 BLE 2.4G Open Mobile App T2 Lock Controller (LC010, LC015) 2.2.3. Dummy Type (MCP040) Lock/Open RS485ID #1 Lock/Open RS485ID #2 Ethernet RS485 Server Lock/Open RS485ID #3 MCP040 T2 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 19 eNBioAccess-T2 User Guide 2.2.4. Network Type (Door Lock) Close BLE 2.4G Lock Control Mobile App T2 Ethernet Open Door Lock Internet Ethernet Server 2.2.5. Network Type (Lock Controller) Close RS485 BLE 2.4G Open Mobile App T2 Lock Controller (LC010, LC015) Ethernet Internet Ethernet Server 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 20 eNBioAccess-T2 User Guide 2.3. Product Specification Category CPU MEMORY Camera LCD Fingerprint Sensor Authentication Method Authentication Speed Fingerprint capacity Log capacity Communication interface Lock Temperature / Humidity Certification Size Spec 32Bit RISC CPU(400MHz) 64M DDR RAM, 32M NOR,128M NAND VGA, F2.8, View angle 61 degree 1.77’’ Color LCD Optical / 500 DPI Fingerprint, RF Card, Mobile Card 1:N < within1sec. (based on 1,000 fingerprints) 20,000 Fingerprints, 10,000 users (Two identical fingerprints registration per user) 100,000 logs TCP/IP, Wiegand In/Out (26/34bit),RS485 Deadbolt, EM Lock, Door Strike, Automatic Door -20~60 ℃ / < RH 90% KC, CE, FCC 58mm(W) * 191mm(H) * 62mm(D) 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 21 eNBioAccess-T2 User Guide 3. Environment Setting 3.1. Checkpoints before Environment Setting 3.1.1. Menu Press F4 long until the menu screen is displayed. It is available to enter the menu without authentication because the manager doesn’t register when shipping the product. 3.1.2. Administration authentication When the administrator is registered, the admin authentication screen is displayed at first as follows. ▶ Administrator authentication Administrator authentication is progressed with fingerprint and card. You can access each menu if the authentication succeeds. Admin authentication is displayed only if there is a registered user. Admin authentication displays only if admin is enrolled already. The admin authentication is needed only in accessing menu mode. It enables to access every menu until you completely escape from main menu. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 22 eNBioAccess-T2 User Guide 3.1.3. How to access the menu without administrator authentication This is the method to enter the Menu in exceptional cases such as losing your administrator card that is registered in the terminal or inability to make a fingerprint authentication because of absence of administrator. ① Power terminal OFF. ② Disassemble device and make case open state. ③ While case opens, make DIP of rear side switch ON state as follows. ON OFF ON ④ Power terminal ON. ⑤ After the terminal completely booted, Press F1 longer to enter the menu with buzzer sound “Ppiririk”. ★ Caution: You should return DIP SWITCH OFF after modification. 3.1.4. Save Default Setting ▶ If there are some changes, save them with buzzer sound “Ppibibig” and return to the initial screen. ▶ If there are no changes, it returns to the previous menu screen. ▶ While changing the settings in the menu, if there is no input for 30 seconds, it returns to the previous menu. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 23 eNBioAccess-T2 User Guide 3.1.5. Default Setting Category MENU MENU MENU MENU MENU MENU > MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU OUT MENU TIME MENU MENU OUT MENU TIME MENU MENU MENU MENU MENU MENU MENU NETWORK NETWORK NETWORK NETWORK NETWORK Default setting USE TN STATIC IP:192.168.0.3 SN:255.255.255.0 GW:192.168.0.1 NETWORK > USE > SERVER IP:192.168.0.2 PORT: 7332 OPTION > ATTEND > TYPE F1~F4 OPTION > ATTEND > AUTO TNA NO OPTION > SCREEN > LANGUAGE English OPTION > SCREEN > SHOW ID YES OPTION > SCREEN > USER LOGO NO OPTION > SCREEN > USER ID LEN OPTION > SCREEN > DATE > FORMAT YYMMDD OPTION > SAVE > LOG SAVE Yes OPTION > SAVE > IMAGE SAVE No OPTION > TIME OUT > RESULT 1sec OPTION > TIME OUT > NET ERROR 30sec OPTION > TIME OUT > PING 60sec OPTION > LOCKING NO USE INT DEVICE > FP SENSOR > 1:1 LEVEL INT DEVICE > FP SENSOR > 1:N LEVEL INT DEVICE > FP SENSOR > LFD LEVEL NONE INT DEVICE > FP SENSOR > AUTH TIME 5sec INT DEVICE > BEEP INT DEVICE > VOICE INT DEVICE > BLE Alarm EXT DEVICE > DOORLOCK > LOCK1 > TYPE STRIKE/OK EXT DEVICE > DOORLOCK > LOCK1 > RESULT N/C USE USE USE USE AUTH MODE TEMINAL ID TEMINAL > TEMINAL > STATIC > > EXT DEVICE > DOORLOCK > LOCK1 > OPEN 5sec > EXT DEVICE > DOORLOCK > LOCK2 > TYPE None > EXT DEVICE > DOORLOCK > LOCK2 > RESULT N/C > EXT DEVICE > DOORLOCK > LOCK2 > OPEN 5sec EXT EXT EXT EXT EXT EXT EXT DEVICE DEVICE DEVICE DEVICE DEVICE DEVICE DEVICE > DOORLOCK > OPEN ALAM > DOORLOCK > EMC OPEN > DOORLOCK > DM0 > DOORLOCK > DM1 > DOORLOCK > DM2 > RS485 > TYPE > RS485 > DEV ID 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 0sec No NONE NONE NONE NONE 24 eNBioAccess-T2 User Guide MENU > EXT DEVICE > WIEGAND > WIE-INPUT NONE MENU > EXT DEVICE > WIEGAND > WIE-OUTPUT NONE MENU > EXT DEVICE > WIEGAND > WIE-OUTPUT> 26 0 BIT or 34 BIT > SITE CODE MENU > EXT DEVICE > WIEGAND > WIE-OUTPUT> 26 UID BIT or 34 BIT > SITE CODE > SEND INFO 3.1.6. Setting guide for Network Configuration 3.1.6.1. Single Type (Door Lock=STRIKE) Menu position MENU>NETWORK> MENU>EXT DEVICE>DOORLOCK>LOCK1>TYPE MENU>EXT DEVICE>DOORLOCK>DM0 MENU>EXT DEVICE>DOORLOCK>LOCK2>TYPE MENU>EXT DEVICE>DOORLOCK>DM1 MENU>EXT DEVICE>RS485>TYPE Possible setting NO USE STRIKE/OK N/O or N/C NONE NONE NONE 3.1.6.2. Single Type (Door Lock=MOTOR) Menu position MENU>NETWORK> MENU>EXT DEVICE>DOORLOCK>LOCK1>TYPE MENU>EXT DEVICE>DOORLOCK>DM0 MENU>EXT DEVICE>DOORLOCK>LOCK2>TYPE MENU>EXT DEVICE>DOORLOCK>DM1 MENU>EXT DEVICE>RS485>TYPE Possible setting NO USE MOTOR1 N/O or N/C MOTOR2 N/O or N/C NONE 3.1.6.3. Single Type (Lock Controller=LC010) Menu position MENU>NETWORK> MENU>EXT DEVICE>DOORLOCK>LOCK1>TYPE MENU>EXT DEVICE>DOORLOCK>DM0 MENU>EXT DEVICE>DOORLOCK>LOCK2>TYPE MENU>EXT DEVICE>DOORLOCK>DM1 MENU>EXT DEVICE>RS485>TYPE MENU>EXT DEVICE>RS485>DEV ID Possible setting NO USE NONE NONE NONE NONE LC010 3.1.6.4. Single Type (Lock Controller=LC015) Menu Position MENU>NETWORK> MENU>EXT DEVICE>DOORLOCK>LOCK1>TYPE MENU>EXT DEVICE>DOORLOCK>DM0 MENU>EXT DEVICE>DOORLOCK>LOCK2>TYPE MENU>EXT DEVICE>DOORLOCK>DM1 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com Possible setting NO USE NONE NONE NONE NONE 25 eNBioAccess-T2 User Guide MENU>EXT DEVICE>RS485>TYPE MENU>EXT DEVICE>RS485>DEV ID LC015 3.1.6.5. Dummy Type (RS485=MCP040) Menu Position MENU>NETWORK> MENU>EXT MENU>EXT MENU>EXT MENU>EXT MENU>EXT MENU>EXT DEVICE>DOORLOCK>LOCK1>TYPE DEVICE>DOORLOCK>DM0 DEVICE>DOORLOCK>LOCK2>TYPE DEVICE>DOORLOCK>DM1 DEVICE>RS485>TYPE DEVICE>RS485>DEV ID Possible setting N/A (Use : When only downloading DB) NONE NONE NONE NONE MCP040 Use in 1~7 3.1.6.6. Network Type (Door Lock=STRIKE) Menu Position MENU>NETWORK> MENU>NETWORK>USE>AUTH MODE MENU>NETWORK>USE>TERMINAL ID MENU>NETWORK>USE>TERMINAL>STATIC MENU>NETWORK>USE>SERVER MENU>EXT MENU>EXT MENU>EXT MENU>EXT MENU>EXT DEVICE>DOORLOCK>LOCK1>TYPE DEVICE>DOORLOCK>DM0 DEVICE>DOORLOCK>LOCK2>TYPE DEVICE>DOORLOCK>DM1 DEVICE>RS485>TYPE Possible setting USE TN 0001 IP:192.168.0.3 SN:255.255.255.0 GW:192.168.0.1 IP:192.168.0.2 PORT:7332 STRIKE/OK N/O or N/C NONE NONE NONE 3.1.6.7. Network Type (Door Lock=MOTOR) Menu Position MENU>NETWORK> MENU>NETWORK>USE>AUTH MODE MENU>NETWORK>USE>TERMINAL ID MENU>NETWORK>USE>TERMINAL>STATIC MENU>NETWORK>USE>SERVER MENU>EXT MENU>EXT MENU>EXT MENU>EXT MENU>EXT DEVICE>DOORLOCK>LOCK1>TYPE DEVICE>DOORLOCK>DM0 DEVICE>DOORLOCK>LOCK2>TYPE DEVICE>DOORLOCK>DM1 DEVICE>RS485>TYPE 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com Possible setting USE TN 0001 IP:192.168.0.3 SN:255.255.255.0 GW:192.168.0.1 IP:192.168.0.2 PORT:7332 MOTOR1 N/O or N/C MOTOR2 N/O or N/C NONE 26 eNBioAccess-T2 User Guide 3.1.6.8. Network Type (Lock Controller=LC010) Menu Position MENU>NETWORK> MENU>NETWORK>USE>AUTH MODE MENU>NETWORK>USE>TERMINAL ID MENU>NETWORK>USE>TERMINAL>STATIC MENU>NETWORK>USE>SERVER MENU>EXT MENU>EXT MENU>EXT MENU>EXT MENU>EXT MENU>EXT DEVICE>DOORLOCK>LOCK1>TYPE DEVICE>DOORLOCK>DM0 DEVICE>DOORLOCK>LOCK2>TYPE DEVICE>DOORLOCK>DM1 DEVICE>RS485>TYPE DEVICE>RS485>DEV ID Possible setting Use TN 0001 IP:192.168.0.3 SN:255.255.255.0 GW:192.168.0.1 IP:192.168.0.2 PORT:7332 NONE NONE NONE NONE LC010 3.1.6.9. Network Type (Lock Controller=LC015) Menu Position MENU>NETWORK> MENU>NETWORK>USE>AUTH MODE MENU>NETWORK>USE>TERMINAL ID MENU>NETWORK>USE>TERMINAL>STATIC MENU>NETWORK>USE>SERVER MENU>EXT MENU>EXT MENU>EXT MENU>EXT MENU>EXT MENU>EXT DEVICE>DOORLOCK>LOCK1>TYPE DEVICE>DOORLOCK>DM0 DEVICE>DOORLOCK>LOCK2>TYPE DEVICE>DOORLOCK>DM1 DEVICE>RS485>TYPE DEVICE>RS485>DEV ID 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com Possible setting USE TN 0001 IP:192.168.0.3 SN:255.255.255.0 GW:192.168.0.1 IP:192.168.0.2 PORT:7332 NONE NONE NONE NONE LC015 eNBioAccess-T2 User Guide 3.2. How to register the terminal in Admin App 3.2.1. Install iAccess M Plus iAccess M Plus is the smartphone App for administrator controlling device via BLE. You can download and install it from Play Store. For more details, please refer iAccess M Plus installation guide. 3.2.2. Execute and Log in iAccess M Plus 3.2.3. Access to Terminal BLE REDAY If you press F3 long on initial screen, the terminal turns to BLE READY. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 27 28 eNBioAccess-T2 User Guide 3.2.4. Terminal login Admin App When the terminal is BLE REDAY, press ADD on iAccess M Plus App and select the terminal. If you know the administrator's ID and password, then click OK to log in. If you do not know the administrator’s ID & password and click OK in empty state. 3.2.5. Administrator authentication of the terminal If an administrator is registered in the terminal, it requires to input card or fingerprint for administrator authentication. If the administrator is not registered in the terminal, it requires no further authentication and authentication succeeds immediately. Input admin’s card or fingerprint “Ppiririk” Success & output Buzzer sound 3.2.6. Terminal registration When admin authentication is successful, Device registration screen is displayed. Press Registration button and complete Device registration. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 29 3.3. Access Device with Admin App If the terminal registration on Admin App is successful, the list is displayed as follows. When pressing View, the pop-up window is displayed to connect the terminal. If the administrator is registered in the terminal, it requires the administrator authentication. If there is no administrator, the login succeeds immediately. If the login is successful, you receive the list of users registered with the Admin App screen. BLE icon is displayed on the terminal. When you log out after finishing the setting from Admin App, BLE icon disappears from the initial screen of the terminal. If it is successful to access, it is available to add / delete user, inquire log data, modify the setting and etc. For more details, please refer the document for Administrator App user guide. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 3.4. Access and Registration between ACM Pro and terminal 3.4.1. Install ACM Pro When shipping the product, it installs ACM Pro Program in PC from the provided CD. For installation guide, please refer the relevant document. 3.4.2. Execute ACM Pro If executing the program, login screen is displayed. Enter User ID that is previously registered and password and then press OK. If login is successful, the screen is displayed as follows. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 30 eNBioAccess-T2 User Guide 31 3.4.3. Set in terminal In order to connect the terminal to the server, set to the network mode and set the information. Move to MENU > NETWORK > USE > TERMINAL and check whether lower information is correct or not. If you have not changed the device network information, it is displayed as follows. In order to access the server Move to MENU > NETWORK > USE > SERVER and check the lower information correctly sets or not. If you do not change the server network information, it is displayed as follows. 3.4.4. LAN connection in terminal At first, you can see the unregistered state because the terminal is not registered. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 32 3.4.5. Register the terminal in ACM Pro Select the unregistered terminal and press Registration button to activate the screen below. Enter device name and explanation to press OK. If the registration is successful, the screen is displayed as follow. For more details about ACM pro operation, please refer ACM Pro guide document. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 33 eNBioAccess-T2 User Guide 3.5. Menu Configuration The whole menu is composed of seven, and main characteristics are as follows. Menu USER Submenu1 ADD Submenu2 USER Submenu3 USER ADMIN INPUT ID *Authentication Type Card FP MCARD *Authentication Condition OR AND ※ MCARD is OR condition only. AUTO ADD MODIFY DELETE DELETE ALL ※ MCARD is not admitted to set up, state check only. Password FP UID > FP1 > FP2 > OK Card UID > Card > OK INPUT ID *Authentication Type Card FP MCARD *Authentication Condition OR AND ※ MCARD is OR condition only. ※ MCARD is not admitted to set up, state check only. FP registration (When checking authentication mode) Card registration (When checking authentication mode) Delete ID 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 34 eNBioAccess-T2 User Guide NETWORK NO USE USE Operate in single mode AUTH MODE TERMINAL ID STATIC DHCP STATIC Server/Terminal Terminal/Server Server Terminal TERMINAL ID IP Subnet mask Gateway DHCP SERVER OPTION ATTEND TYPE AUTO TNA SCREEN LANGUAGE ENGLISH(0) KOREAN(1) INDONESIAN(2) MULTILINGUAL(3) ARABIC(4) SPANISH(5) PORTUGUESE(6) FRENCH(7) RUSSIAN(8) FARSI(9) JAPANESE(10) CHINESE(11) SHOW ID USER LOGO SAVE USER ID LEN LOG SAVE IMAGE SAVE TIMEOUT Date RESULT NET ERROR PING FORM 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com SERVER Port No NONE M1 F1~F2 M2 F1~F4 M3 F1~F49 NO YES NO YES NO USE USE 4~16 NO YES NO YES YYMMDD DDMMYY MMDDYY 35 eNBioAccess-T2 User Guide SETTING INT DEVICE FP SENSOR BEEP VOICE BLE TAMPER EXT DEVICE DOOR LOCK 1:1 LEVEL (1~9) 1:N LEVEL (5~9) LFD LEVEL AUTH TIME 0~3 0~5 BLE READY NO ALARM ALARM LOCK1 YYYYMMDD-hhmmss NONE LOW MIDDLE HIGH *TYPE Not Use Strike/OK Indication Motor1 Schedule alarm *RESULT Normal Open Normal Close LOCK2 *OPEN TIME : 5[1~20sec] * TYPE NONE Fail Indication Motor2 Schedule alarm * RESULT Normal Open Normal Close OPEN ALARM EMC OPEN DM0 DM1 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com * OPEN TIME 5[1~20] NO YES NONE Door Normal Open Door Normal Close NONE Lock Normal Open Lock Normal Close NONE Lock Normal Open Lock Normal Close 36 eNBioAccess-T2 User Guide DM2 RS485 TYPE WIEGAND DEV ID: 0~255 WIE-INPUT WIE-OUTPUT Not use Normal Open Normal Close Fire Normal Open Fire Normal Close Panic Normal Open Panic Normal Close Urgent Norm Open Urgent Normal Close NONE LC010 LC015 SR100 MCP040 *TYPE NONE WIE26BIT WIE34BIT CUSTOM *TYPE NONE WIE26BIT WIE34BIT CUSTOM *SiteCode *More Information UID CARD STATE DB INFO NETWORK USER CNT: USER MAX: ADMIN: FP CNT: FP MAX: CARD CNT: CARD MAX: M.CD CNT: LOG CNT: LOG MAX: TID: xxxx NET: YES, MODE:TN NET TYPE: STATIC ENCRYPT: DES CIP/SN/GW--------xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx MAC: xx: xx: xx: xx: xx: xx 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 37 eNBioAccess-T2 User Guide OPTION INT DEVICE EXT DEVICE SIP/PORT--------xxx.xxx.xxx.xxx xxxx ATTEND: M2(F1~F4) AUTO TNA: YES LANGUAGE: English SHOW ID: YES LOGO USE: NO UID LEN:4 DATE: YYMMDD LOG SAVE: YES IMG SAVE:NO SHOW TO: x PING TO: x NET TO: x: CARD TYPE: RF/SC CARD FMT: STD FP1:1:x FP1: N:x LFD: xx AUTH TIME: BEEP VOL: VOICE VOL: BLE Name/MAC---XXXXXXX (BLE Name) XXXXXXXXXXXXXXXXX TAMPER:ALARM LOCK1---------------------TYPE: STRIKE/OK OUT: N/O OPEN: 3000ms LOCK2 ------------------TYPE: NONE OUT: N/O OPEN: 3000ms DOOR WARN: 0sec FORCE OPEN:NO I/O PORT RS485: LC010 RS485 ID: xxx WIEGAND---------------IN/OUT :34B/34B SITECODE: xxx SEND:USERID LOCK1: HIGH LOCK2: HIGH DM0: HIGH DM1: HIGH 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 38 eNBioAccess-T2 User Guide VERSION RECOVERY INITIALIZE SELF TEST DM2: HIGH W0IN: HIGH W1IN: HIGH INSIDE: HIGH TAMPER SW:HIGH HW FW Card BLE SN(Serial Number) CONFIG LOG DB FACTORY INT DEVICE EXT DEVICE BACKUP LOG EXPORT USER EXPORT USER IMPORT FW UPDATE REBOOT 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com VOICE CARD FP SENSOR CAMERA LED DOORLOCK SENSOR IN eNBioAccess-T2 User Guide 39 3.6. USER 3.6.1. Menu Configuration USER menu has the feature as follows. Category ADD AUTO ADD MODIFY DELETE DELETE ALL Explanation Use to add user and admin with various certification conditions. Use to add Card or Fingerprint user automatically. Use to add certification conditions, card or fingerprint of registered user. Use to delete a registered particular user. Use to delete all registered users. 3.6.2. ADD 3.6.2.1. USER TYPE If you press ADD in the menu, the screen asking the user type is displayed as follow. USER TYPE USER Explanation Only available for authentication No Authorization to access menu When selecting user, the screen is displayed as follow. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 40 eNBioAccess-T2 User Guide ADMIN Available to add and delete user. Available to access menu and modify it. When selecting the administrator, the screen is displayed as follows. 3.6.2.2. AUTH TYPE There are FP(Fingerprint), Card, and MCARD (Mobile card) in the menu. But MCARD can only provide the check state, and do not provide checking or unchecking. For checking or unchecking with MCARD, it is only available via Server and Admin App. There are AND and OR in authentication conditions. In AND, all authentication conditions should be satisfactory and then authentication succeeds. In OR, one of authentication conditions should be satisfactory and authentication succeeds. FP:0 ➔ FP is abbreviation of Finger Print. 0 means the registered FP number. (1FP means 2 fingerprints) CD:0➔ CD is abbreviation of CARD. 0 means the registered CARD number. Maximum card number is 1. (U) ➔ Means your Registration Authority is general user(USER). (A) ➔ Means your Registration Authority is administrator (ADMIN). [FR Authentication] [Card Authentication] [FP or Card Authentication] 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com [FP and Card Authentication] eNBioAccess-T2 User Guide 41 3.6.2.3. INPUT FP Input the same fingerprint twice when you check the Fingerprint as authentication type. If you want to add only one fingerprint, select 1. NO. If you input the fingerprint second times and they are normal, INPUT OK is displayed. If you want to add more fingerprints, select 2. YES. One user can register 20 people for maximum. 3.6.2.4. INPUT CARD When you check Card as AUTH TYPE, you will follow steps as below. If you input CARD on Waiting state, registration completes and INPUT OK screen is displayed. 3.6.3. AUTO ADD AUTO ADD is used when you want to register general users (not admin user) consecutively with card or fingerprint. If you select FP, it adds users by increasing ID consecutively only with fingerprint. If you select CARD, it adds users by increasing ID consecutively only with card. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 42 3.6.3.1. AUTO ADD – 1. FP This is the menu when registering the users continuously only by fingerprint. Input fingerprint in twice and then the registration succeeded. If you want to add more users, select 2. YES, and continue the registration. User ID increases automatically. 3.6.3.2. AUTO ADD This is the menu when registering the users continuously only by card. After inputting the card, INPUT OK is displayed on the screen. If you want to add the other user, select 2. YES, and register the user. User IDs increases automatically. 3.6.4. MODIFY It is used when modifying the authentication type of the registered user. In authentication type, authentication type (fingerprint, card) and authentication condition (AND, OR) can be changed. If the modification type is modified, authentication information about the authentication type can be input. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 43 3.6.5. DELETE It is used when deleting the registered users. 3.6.6. DELETE ALL It is used when deleting all the registered users. It should be careful when trying to delete, because all the users (general user, administrator) are deleted. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 44 eNBioAccess-T2 User Guide 3.7. Network Menu 3.7.1. Menu Configuration Network menu has the following features. Category NO USE USE Explanation Network not used AUTH MODE TERMINAL ID TERMINAL SERVER Operation Mode Standalone Explanation This is the operation mode independently without server and communication. The administrator can control all the functions of the terminal. Authentication log is saved in the terminal but is not sent to server. After converting Standalone mode into Network mode and accessing in server, the authentication log saved internally is sent to sever. If you want to see the authentication log data in Standalone mode, move RECOVERY > BACKUP > LOG EXPORT from main menu, download it in USB through UDL module and check it by ACM Pro program. * USB port is service port. This is the operation mode by communicating with the server and it can control the functions of the terminal by the remote-control. Depending on the authentication mode, the order of authentication can be different. (Authentication order about whether trying to authenticate in the terminal or the server first) Authentication log is sent to the server if the network is connected regardless of authentication mode. Network Mode Remarks Standalone Network mode 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 45 eNBioAccess-T2 User Guide 3.7.2. AUTH Mode Authentication mode means the authentication priority to determine whether authentication processing is done in the terminal or the server when user-authentication. It is a valid setting only when using the network. All authentication log is sent to server through the network. AUTH MODE Server/Terminal Explanation Server Terminal After trying to do server authentication at first, terminal authentication is processed. Terminal/Server Terminal Server After trying to do terminal authentication at first, server authentication is processed. Server Server only Authentication is processed only in server. Terminal Terminal only Authentication is processed only in terminal. Even if it is “Terminal Only”, authentication log is sent to server. ★ In Server Only” mode, if the network is disconnected, all the authentication is processed in fail. If the mode is not “Server Only” (Server/Terminal, Terminal/Server, Terminal) and the network is disconnected, authentication is processed in the base of DB in the terminal. 3.7.3. Terminal ID Terminal ID is a valid information only when using the network, and it can be set in the range of 1~200. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 46 eNBioAccess-T2 User Guide 3.7.4. Terminal It is used when setting the network information in the terminal. Network setting in the terminal can be set in Static IP and DHCP. STATIC: Set the value as a user wants. DHCP: Allocated flexibly. (It can be operated normally when using the router supporting DHCP.) If STATIC is used, it is used when setting IP, Subnet mark and Gateway address of the terminal. The following is the default setting value. Category Terminal IP SUBNET MASK GATEWAY Default Setting Value 192.168.0.3 255.255.255.0 192.168.0.1 It can set the address value as follows. Function Key F1 F3 F2 F4 F4 Long Function Explanation Increase the setting value Decrease the setting value Move to left Move to right Save the setting value 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 47 eNBioAccess-T2 User Guide 3.7.5. Server When the terminal accesses in server through the network, set the information. Default setting value is as follows. Category Server IP Port number Default Setting Value 192.168.0.2 7332 3.8. Option Menu 3.8.1. Menu configuration User menu has the same function as follows. Category ATTEND SCREEN SAVE TIMEOUT LOCKING Explanation TYPE AUTO TNA LANGUAGE SHOW ID USER LOGO USER ID LEN DATE LOGO SAVE IMAGE SAVE RESULT NET ERROR PING NO USE / USE 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 48 eNBioAccess-T2 User Guide 3.8.2. ATTEND TNA related menu are configured. Category TYPE Explanation When Function Key is used in time and attendance option, it is used. AUTO TNA Use to determine whether to remain Function Key or not shown in the default screen. 3.8.2.1. TYPE It is used when setting ATTEND mode. If setting ATTEND mode, ATTEND mode is displayed in the screen when pressing Function Key shortly (F1~F4) in the default screen. Mode NONE F1~F2 F1~F4 F1~F49 Default screen F00 F01 F02 F03 F04 F11~F49 Explanation F00 is only displayed in default screen. F1~F2 Function Key is recognized and F01, F02 are displayed in default screen. F1~F4 Function Key is recognized and, F01, F02, F03, F04 are displayed in default screen. F1~F4 Function Key is recognized and F01, F02, F03, F04, F11~F49 are displayed. Meaning ACCESS MODE CLOCK-IN MODE CLOCK-OUT MODE CHECK-OUT MODE CHECK-IN MODE EXPANDED MODE TNA mode (F00~F49) is converted into F00 after 10 seconds if you don’t use AUTO TNA. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 49 3.8.2.2. AUTO TNA AUTO TNA is the menu to determine whether to remain continually the setting TNA mode or not. Category NO YES Explanation The TNA mode that a user set is automatically returned into F00 after 10 seconds. The TNA mode that a user set is continuously displayed. 3.8.3. Screen The screen display related menu is configured. Category LANGUAGE SHOW ID USER LOGO USER ID LEN DATE Explanation Change the language which is displayed in the screen and is spoken. When authentication succeeds, you can set whether showing ID or not. You can set whether the logo image for customers is used or not in the default screen. It is used when modifying the length of user’s ID. It is used when modifying Year/ Month/ Day and time displayed in the default screen. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 50 3.8.3.1. Language It is used to modify the menu text and audio language displayed on the screen. Audio languages are all supported but some language cannot be supported in the menu text. 3.8.3.2. SHOW ID It is used to determine whether to show your ID at the time of authentication success window. Category NO USE USE Explanation Do not show your ID at the time of authentication success Screen Yes "****" When authentication successes, it doesn’t show user’s ID on the screen. For example, “****”. When authentication successes, it shows user’s ID on the screen. For example, “****”. 3.8.3.3. USER LOGO It is used to determine whether the displayed image shows the customer’s logo or not in the default screen. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 51 eNBioAccess-T2 User Guide Category NO USE Explanation Use basically the provided default image USE Use the customer’s logo image To use the customer’s logo image, you should update the customer’s image through the server first and then the customer’s image is displayed in the default screen. When editing the customer’s image, it should be edited in the red box as the left picture. 3.8.3.4. USER ID LEN It is used to change the length of user’s ID. If changing the user’s ID, it should change in the absence of a DB because it affects user’s DB that is internally registered. The setting range can be set from 4 to 16. 3.8.3.5. DATE It is used to select the order of Year, Month and Day displayed in the default screen. YY: Year MM: Month DD: Day 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 52 Through SETTING, you can set current Year, Month, Day and Time. 3.8.4. SAVE It is the menu including the function related to SAVE. 3.8.4.1. LOG SAVE It is used to set whether to save the authentication log in memory or not. The default setting is YES. 3.8.4.2. IMAGE SAVE It is used to set whether to save the captured photo from camera when authentication successes or fails. The default setting is Fail. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 53 3.8.5. TIMEOUT It is the menu that has the setting related with timeout. 3.8.5.1. RESULT It is used to set the authentication result display how long it keeps for a seconds. The setting range can be set from 0 to 5 seconds. If it set to 0, then don’t display the authentication result. 3.8.5.2. NET ERROR If it does not communicate with the server over a period of time, it is used to set whether there is a network communication error. If PING doesn’t come for a setting time in the server, it retries to connect the terminal. The setting range is available for 60~600 seconds. 3.8.5.3. PING It sets the cycle that terminal sets PING command to the server. The setting range is available for 30~255 seconds. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 54 3.8.6. LOCKING Locking mode is the function that it rejects the authentication of all users until the administrator enters the menu and releases the locking mode. The default setting is NO USE. The default screen is displayed as follows when setting to use locking mode. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 55 eNBioAccess-T2 User Guide 3.9. INT DEVICE 3.9.1. Menu Configuration INT DEVICE menu has the features as follows. Category FP SENSOR BEEP VOICE BLE TAMPER Explanation 1:1 LEVEL 1: N LEVEL LFD LEVEL AUTH TIME Set Beep Sound. Set Voice Sound BLE registration mode Set the alarm when opening terminal case. 3.9.2. FP SENSOR For the fingerprint recognition, it sets for the user registration and authentication about the module installed inside. 3.9.2.1. 1:1 LEVEL It is the authentication level used when it tries 1:1 fingerprint authentication. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 56 3.9.2.2. 1: N LEVEL It is the authentication level used when it tries 1: N fingerprint authentication. 3.9.2.3. LFD LEVEL It sets LFD LEVEL to prevent the duress fingerprint. If setting LFD LEVEL higher and higher, the ability to prevent the input of duress fingerprint produced by rubber, paper, film, and silicon etc. reinforces but too dry fingerprint cannot be input well. Also the authentication speed can be slow. 3.9.2.4. AUTH TIME It means the maximum time to process 1: N authentication. If the authentication time exceeds, authentication timeout occurs. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 57 3.9.3. BEEP It informs key touch, authentication success, and failure as beep and sets the beep level. The beep level is available from 0 to 3. 3.9.4. VOICE It supports the notice such as authentication success/failure and authentication retrial. It sets the authentication level. The voice level is available from 0 to 5. 3.9.5. BLE When registering the terminal in Administrator’s App, this menu is required. By using this menu, it can make the terminal BLE READY. Only if the terminal is BLE READY, it can perform the registration procedure of the terminal after the administrator app accesses the terminal. When pressing F3 long in the default screen of the terminal, it performs same operation with this menu. Regarding the method to register the terminal in the administrator APP, please refer 3.2 How to register the terminal in the administrator App. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 58 eNBioAccess-T2 User Guide 3.9.6. TAMPER When disassembling the terminal randomly, it sets whether to sound the alarm. If selecting 1. NO ALARM, even if disassembling the terminal, the alarm doesn’t sound but icon is displayed. If selecting 2. ALARM, icon displays and the beep sounds in at regular intervals. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 59 eNBioAccess-T2 User Guide 3.10. EXT DEVICE 3.10.1. Menu Configuration EXT DEVICE has the features as follows. Category Explanation DOORLOCK It sets the control device to lock through the internal relay. RS485 It sets the devices using RS485. WIEGAND It sets the device using WIEGAND. 3.10.2. DOORLOCK It is the menu to set lock device (Strike, Motor type door lock) by using LOCK1 and LOCK2 port. 3.10.2.1. LOCK1 Category NONE Strike/OK MOTOR1 Explanation No Use When connecting the light to mark authentication success/failure or 2. STRIKE/OK. When connecting Motor lock 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 3.10.2.2. 60 LOCK1 RESULT OUT N/O: HIGH signal outputs in LOCK1 Output port. N/C: LOW signal outputs in LOCK1 Output port. 3.10.2.3. LOCK1 OPEN TIME It sets the time to give the signal when LOCK 1 sets 2. STRIKE/OK. Strike type means the time from opening to locking the door after authenticating. 3.10.2.4. NONE FAIL IND MOTOR2 3.10.2.5. LOCK2 type When not using When connecting the light to mark authentication failure in Lock 2 When connecting motor lock LOCK2 RESULT OUT N/O: HIGH signal is printed in LOCK2 RESULT OUT port. N/C: Low signal is printed in LOCK2 RESULT OUT port. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 3.10.2.6. 61 LOCK2 OPEN TIME If Lock 2 sets FAIL IND, it sets the time to give the signal. 3.10.2.7. OPEN ALARM It makes the terminal check the door open time. If the setting time (Minimum 5 seconds ~ Maximum 30 seconds) exceeds and door opens, it is the feature to beep. When setting to ‘00’, it doesn’t beep even if setting 01~04. When exceeding 5 seconds for minimum, it starts to beep. 3.10.2.8. EMC OPEN This feature is that a user doesn’t lock the door and open the door on purpose. If setting EMC OPEN ‘2. YES’, the following icons are displayed in the default screen and remain open the door. LED shows GREEN continuously. If setting ‘1. NO’, EMC OPEN icon disappears. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 3.10.2.9. 62 DM0 DM0(Door Monitor 0) is the input port and it is used to detect the signal state of door open. 3.10.2.10. DM1 DM1(Door Monitor 1) is the input port and it is used to detect the signal state of lock. 3.10.2.11. DM2 DM2(Door Monitor 2) is the input port and it is used to detect a various of sensor and alarm. For example, if connecting with fire sensor, it should set 4. FIRE N/O or 5. FIRE N/C and it may cause fire alarm and icon in case of fire. In case of fire, the door automatically opens for safety. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 63 eNBioAccess-T2 User Guide 3.10.3. RS485 It is the setting for the device with RS485 communication to interface with external. 3.10.3.1. TYPE NONE LC010 LC015 SR100 MCP040 3.10.3.2. TYPE Explanation It doesn’t use RS485. Lock Controller It controls LOCK through the other external module. Lock Controller It controls LOCK through the other external module. FP Dummy Reader When it installs the other FP dummy reader device in external and then operates, it is used. Terminal operates as the dummy reader. If Terminal is connected with MCP040 device, icon is displayed in the defa ult screen. If Terminal is not connected with MCP040, icon is displayed. The authentication result is determines whether or not successful by MCP040. RS485ID uses 1~7. DEV ID DEV ID is the ID that distinguishes devices and it can be set up 0-7 during RS484 communication. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 64 3.10.4. WIEGAND WIEGAND supports each one of Input port and Output port. 3.10.4.1. WIE-INPUT It is used to set the input type when working with the device connected into WIEGAND input port. Category NONE WIE26BIT WIE34BIT CUSTOM Explanation WIEGAND input port is not used. EM, HID26 Card Module Mifare Card Modules Use Access Manager program and set Wiegand format. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 65 eNBioAccess-T2 User Guide 3.10.4.2. WIE-OUTPUT Category Explanation NONE WIEGAND output port is not used. 26bit It sends “Site code [1 byte] + User ID [2 bytes], so it sets User ID less than 4 digits. Example) In case of SiteCode:045(2Dh), UID:6543(198Fh) 1 00101101 0001 1001 10001111 0 34bit It sends “Site code [1 byte] + User ID [3 bytes], so it sets User ID less than 7 digits However, when user ID is 8 digits, it ignores Site code and only sends user ID [4 bytes]. Example) SiteCode:001(1h), UID:123456(1E240h) 0 00000001 00000001 11100010 01000000 0 CUSTOM 3.10.4.3. It sets as a user wants. It only sets in server and it only inquires the setting type in the terminal. CUSTOM BIT LENGTH It can set BIT length as 1~128. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 66 eNBioAccess-T2 User Guide 3.10.4.4. Site Code It is used to set the value of Site Code that is sent to WIEGAND output port. Type 26bit 34bit Input range of SITE CODE 0~255 0~32767 3.10.4.5. SEND INFO It is used to select the transmitting data by the output port. SEND INFO USER ID Card 26 34 26 34 Type Bit Bit Bit Bit None E.Parity(1)+ Site Code(8) + ID(16) + O.Parity(1) E.Parity(1)+ Site Code(16) + ID(16) + O.Parity(1) E.Parity(1) + 24bit Card CSN + O.Parity(1) E.Parity(1) + 32bit Card CSN + O.Parity(1) 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 67 3.11. STATUS 3.11.1. Menu Configuration STATE menu has the STATE information DB INFO NETWORK OPTION INT DEVICE EXT DEVICE I/O PORT VERSION following features. Explanation User DB, Authentication log data The setting information related to network TNA, Screen setting, Saving, Time out, Lock mode Display the setting state related to the internal device. Display the setting state related to the external device. Display the current signal of Input / Output port that interfaces with outside. Display the version of the equipped device in the terminal. 3.11.2. DB INFO It displays User’s DB information and the authentication log information. 3.11.3. NETWORK It displays the network setting value. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 3.11.4. OPTION It displays the option setting value. 3.11.5. INT DEVICE It displays the setting value related to the internal device. 3.11.6. EXT DEVICE It displays the setting information related to the external device. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 68 eNBioAccess-T2 User Guide 3.11.7. I/O PORT It reflects the current I/O Port state and displays it on the screen. Output Port: LOCK1, LOCK2 Input Port: DM0~DM2, W0IN, W1IN, INSIDE Open, Tamper When the input port shorts GND, the signal modifies from HIGH to LOW. 3.11.8. VERSION It displays the equipped module in the terminal and other version information. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 69 eNBioAccess-T2 User Guide 70 3.12. RECOVERY 3.12.1. Menu Configuration RECOVERY has the features as follows. Category INITIALIZE Explanation CONFIG LOG DB FACTORY INT DEVICE EXT DEVICE LOG EXPORT USER EXPORT USER IMPORT FW UPDATE REBOOT SELF TEST BACKUP REBOOT 3.12.2. INITIALIZE It is used to initialize CONFIG, LOG DB, and FACTORY in the terminal. 3.12.2.1. CONFIG It is used to initialize the modified setting value in the menu as the default value when shipping from factory. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 3.12.2.2. 71 LOG DB INIT It is used to delete the user authentication log saved in the terminal. 3.12.2.3. FACTORY INIT If trying FACTORY INIT, setting data, authentication log data, and user registration information are initialized as setting state when shipping from factory. ★ It should be careful because the current data can be lost when you setting wrong. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 72 eNBioAccess-T2 User Guide 3.12.3. SELF TEST It is used when the terminal tests the operation state about internal & external device by itself. 3.12.3.1. INT DEVICE It could test VOICE, CARD, FP SENSOR, CAMERA and LED equipped internally by itself. Category VOICE CARD FP SENSOR CAMERA LED Explanation Voice output test Card recognition test Fingerprint recognition test Camera equipment test LED output test Voice Test When authentication successes, it repeats and play voice guidance. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 73 Card Test As you see below, the screen displays “INPUT CARD” state at first. When recognizing the card, “Success” screen displays and it returns “INPUT CARD” state again. If you want to stop testing, press F2. FP Sensor Test FP Sensor Test is used to test the operation state of FP sensor from terminal. Input your fingerprint twice, if they are same, it shows “Success” screen. Otherwise, if not, it shows “Failure” screen. Camera Test It is used to check whether the camera state is normal in the terminal to capture photos. LED Test It is used to check whether the state is normal about RED, GREEN and BLUE LED used to inform the operation state. At intervals of 2 seconds, RED, GREEN and BLUE LED changes from ON to OFF. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 74 eNBioAccess-T2 User Guide 3.12.3.2. EXT DEVICE It can test the features related to the external device by itself. Category DOORLOCK SENSOR IN Explanation Lock1, Lock2 DM0 DM1 DM2 INSIDE OPEN TAMPER DOORLOCK Test It is used to check the state of LOCK1, LOCK2 OPEN /CLOSE from the terminal. The procedure is as follows. SENSOR IN It is used to check the signal state about the input port. When the port shorts GND, if signal changes LOW, it is normal. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 75 eNBioAccess-T2 User Guide 3.12.4. BACKUP When the saved data from the terminal sends to USB by using UDL device or brings the data from USB memory and then applies it, it is used. It is available only when the UDL module is. UDL is the option module, so it is not basically provided. If you want to get more information about UDL module, please contact NITGEN customer service. USB memory recommends using Sandisk.(NOTICE: UDL Device is not supported for all USB memory.) * USB port is service port. USB memory UDL module If Terminal detect UDL Device and USB memory, icon is displayed in the default screen. If icon isn’t displayed, all backup function doesn’t operate. 3.12.4.1. LOG EXPORT The saved log data from terminal saves in USB memory through UDL (User Data Downloader module). Only the log data in the selected period sends to USB and saves it through UDL. The file name saved in USB memory is divided by period as follows. * USB port is service port. 1. 1Day: L1Day.NLG, 2. 1~30Day: L30Day.NLG 3. 1~90Day: L90Day.NLG 4. 1~180Day: L180Day.NLG 5. ALL: ALL.NLG 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 3.12.4.2. 76 USER EXPORT The saved User DB from the terminal saves in USB memory through UDL. It saves as USER.NDB file. * USB port is service port. 3.12.4.3. USER INPUT It reads the user DB from USB memory through UDL and add it in terminal user DB. If inputting user DB in the terminal, all existing user DB are deleted. If you need the existing user DB saved in the terminal, back up first and try to input the user. It opens USER.NDB file in USB memory and brings into the terminal through UDL. The user registration data that you brought is reflected in the internal DB and added. * USB port is service port. 3.12.4.4. FW update It is used when reading the firmware from USB memory through UDL and updating the terminal firmware. Firmware proceeds only when there is FW.NFW file name in USB memory. * USB port is service port. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com eNBioAccess-T2 User Guide 3.12.5. REBOOT It is used when rebooting the terminal. 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com 77 eNBioAccess-T2 User Guide 78 FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: 1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. “CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit. Contains FCC ID: 2AEEY-PBLN51822M 12F, Daemyung Valeon bldg., 127, Beobwon-ro, Songpa-gu, Seoul, Korea (05836) Tel : 02-6488-3232 , Fax : 02-6488-3099, E-Mail :customer@nitgen.com http://www.nitgen.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 78 Language : ko-KR Tagged PDF : Yes Title : AC7000_UserGuide_1.0 Author : iddol Creator : Microsoft® Word 2010 Create Date : 2016:08:18 16:30:24+09:00 Modify Date : 2016:08:18 16:30:24+09:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools