NOSTALGIA ELECTRICS Popcorn Popper Manual L1001073

User Manual: NOSTALGIA NOSTALGIA ELECTRICS Popcorn popper Manual NOSTALGIA ELECTRICS Popcorn popper Owner's Manual, NOSTALGIA ELECTRICS Popcorn popper installation guides

Open the PDF directly: View PDF .
Page Count: 14

VintageCoJJectionTM

(HdFashionedMovie TimePopcornCartTM

instructions and Recipes

CONTENTS

IMPORTANT PRECAUTIONS ................. 3

IMPORTANT SAFEGUARDS .................. 3

INTRODUCTION ........................ 4

PARTS & ASSEMBLY ...................... 5

HOW TO OPERATE ....................... 9

HELPFUL TIPS ......................... 10

CLEANING & MAINTENANCE ................. 10

RECIPES ............................ 11

RETURNS & WARRANTY .................... 13

SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and

on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards

that can kill or hurt you and others.

All safety messages will follow the safety alert symbol.

All safety messages will tell you what the potential hazard

is, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

Appliance Specifications:

120 Volts, 60 Hz

640 Watts, ETL Approved

iMPORTANTPRECAUTIONS

1. NEVER immerse in water.

2. NEVER use near water.

3. NEVER use an abrasive sponge nor cloth.

4. NEVER use a scouring pad on the appliance.

5. NEVER leave appliance unattended while in use.

6. NEVER force Kettle in or out of the brackets as this may cause gears

to become misaligned and appliance will not operate properly.

7. Unplug unit from outlet when not in use and during cleaning.

8. DO NOT operate this appliance with a damaged cord or

plug, nor if the appliance ever malfunctions.

9. DO NOT clean any parts of this appliance in a dishwasher.

10. Keep out of reach of children.

11. This appliance is NOT A TOY.

12. Unsupervised young children and cognitively challenged

individuals should never operate this appliance.

13. Young children should be supervised while in proximity

of the appliance to ensure their safety.

IMPORTANTSAFEGUARDS

Basic safety precautions should always be followed when

using electrical appliances, including the following:

1. Read all instructions before operating this appliance.

2. Keep door of Main Unit closed while operating. Do not

touch Kettle while operating; it gets very ROT.

3. To protect against electrical shock do not immerse cord, plug

or any part of this appliance in water or other liquids.

4. Close supervision is necessary when any appliance is used near children.

5. Unplug from outlet when not in use, before removing parts and before cleaning.

6. DO NOT operate any appliance with a damaged cord or plug,

nor if the appliance has been damaged in any manner. Return the

appliance to the nearest repair shop for examination or repair.

7. The manufacturer does not recommend the use of accessory

attachments. Use of accessory attachments may cause injuries.

8. DO NOT use outdoors.

9. Position the appliance as close to the outlet as possible

to prevent injury due to tripping over cord.

10. DO NOT leave Kettle motor running once popping has ceased.

11.Extremecautionmustbeusedwhenmovingthisappliance.

12.DONOTusetheapplianceforotherthanitsintendeduse.

13.Anappliancethatispluggedintoanoutletshouldnotbeleftunattended.

14.CheckKettleforpresenceofforeignobjectspriortouse.

15.MakesuretheKettleisproperlyattachedtobracketsbefore

operatingandthatthemotorplugispluggedintotheKettle.

16.Ashortpowersupplycordisprovidedtoreducetheriskresulting

frombecomingentangledortrippingoveralongcord.

17.Longerdetachablepowersupplycordscanbeusedifcareisexercisedintheiruse.

18.Themarkedelectricalratingofanextensioncordshouldbeat

leastasgreatastheelectricalratingoftheappliance.

19.Thisappliancehasapolarizedplug(onebladeiswiderthan

theother).Toreducetheriskofelectricalshock,thisplugis

intendedtofitintoapolarizedoutletonlyoneway.

20, Save these instructions w.

INTRODUCTION

Thank you for purchasing the OLD FASHIONED MOVIE TiME POPCORN CART*_ _

a product in Nostalgia Electrics' Vintage SeriesZ_ _ This 53" tall vendor-style

popcorn cart will be the hit of every party, it pops up to 16 cups of hot, fresh,

kettle cooked popcorn per batch. Providing a vintage look and feel, reminiscent

of silent movie houses and carnivals circa-early 1900s, the OLD FASHIONED

MOVIE TiME POPCORN CART *'_ is designed for both home and commercial

use. it features a large, stainless steel kettle with a built-in stirring system and

kernel catcher to keep unpopped kernels out of each perfect batch. There is a

compartment in the base of the unit to store supplies, making it easy to keep the

cart well stocked and organized. The OLD FASHIONED MOVIE TiME POPCORN

CART T'_ has an easy-to-clean design, its accessible height makes serving a snap.

|

PARTS&ASSEMBLY

Hardware

®

#1 Screw (lOmm) #2 Bolt (lOmm) #3 Bolt (60ram)

Qty. 4 Qty. 6 Qty. 4

© ©

#4 Flat Washer #5 Nut Cap

Qty. 14 Qty. 6

|

Assembly

(A) Main Unit (B) Kernel Measuring

Cup

(C) Storage

Compartment

Q

(D) Oil Measuring

Spoon (1 tbsp.)

(E) Push Handle (F) Axle Bolts (G) Wheel (H) Wrenches

(I) Base Support (J) Cross Bar (K) Leg Assembly (L) Popcorn Scoop

Assembly of Base Support

1. Push Handle (E) attaches onto the Storage Compartment

(C) using all of the supplied #1 Screws.

2. Insert Cross Bar (J) into the square inserts on the inside of Base Support (m)

and secure from below with two #2 Bolts and two #4 Flat Washers. Insert

the Leg Assembly (K) over the protruding ends of the Base Support (I) and

fasten four #3 Bolts and four #4 Flat Washers and four #5 Nut Caps.

p

3. Assemble Base Support (0 into the bottom of the Storage Compartment

(C) and secure with four #2 Bolts and four #4 Flat Washers.

Assembly of Wheels

1. Insert Axle Bolt (F) into Base Support (I).

2. Put on #4 Flat Washer. Slide Wheel (G) into Axle Bolt (F)

and add a second #4 Flat Washer.

3. Use Wrench (H) to tighten the #6 Nut Cup.

4. Add #4 Flat Washer, second Wheel (G), another #5 Flat Washer, and #5 Nut

Cap to the other side of the Axle Bolt (F), following the directions above.

5. Use Wrench (H) to tighten the #5 Nut Cap.

(#5)

Nut

Cap\

(#4)

Flat

Washer

CG) (I)

Base

Support

Assembly of Main Unit

1.

2.

Place Main Unit (A) onto the top of the Storage Compartment (C).

Ensure that the two inserting pins at the bottom of the Main

Unit (A) line up correctly so that Main Unit (A) can be locked

under the beam of the Storage Compartment (C).

|

HOWTOOPERATE

Before first use, clean the inside of the unit by wiping with a moist,

non-abrasive sponge, towel or cloth and then wipe with a non-

abrasive dry towel. Wipe down the inside of the Kettle and be

sure it is properly placed in the brackets before starting.

ON /OFF &

Light Switches

Crank Handle

Stainless Steel Kettle

1. First, find a flat surface near an electrical outlet before

starting. Make sure your cord is away from any water source.

Jt is acceptable to use an extension cord if needed.

2. Gather your popcorn making supplies: popcorn, seasonings, bowls or bags for

holding the popcorn, cooking oil, Kernel Measuring Cup and Oil Measuring Spoon.

(Kernel Measuring Cup and Oil Measuring Spoon are included with your unit).

3. Make sure Kettle is properly secured in support brackets.

4. Make sure Kettle motor is plugged in.

5. Plug in the appliance while switch is flipped to OFF position.

6. Turn appliance ON by flipping the switch on the top of the

machine (see illustration above for location of switches). Allow

the appliance to run 3-5 minutes to heat up Kettle.

7. Once Kettle has heated, turn unit OFF before adding ingredients.

8. Use the Oil Measuring Spoon supplied with your OLD FASHmONED MOVIE TmME

POPCORN CART ''_ to add 2 tablepoons of your favorite popcorn cooking oil

to the Kettle. For every Measuring Cup full of kernels (4 oz.), add 2 spoonfuls

(2 tbsp.) of oil. For best results, light vegetable oil is recommended.

9. Add 4 ounces of popcorn kernels to the Kettle

using supplied Kernel Measuring Cup.

10. Close the door and turn unit ON. Jn no time at all, you will hear

the popping begin. Fresh, hot popcorn will begin to burst out

of the flip lids on the Kettle - just like at the theater!

HELPFULTiPS

SMOKING

if your OLD FASHIONED MOVIE TIME POPCORN CART T'_begins to

smoke during cooking, it may be due to grease build up. In order to reduce

smoking, make sure that you clean the inside of the Kettle between uses.

CLEANING& MAINTENANCE

1. Make sure appliance is unplugged before cleaning. Unplug the outer plug

to the outlet as well as the Kettle motor plug inside the Main Unit.

2. Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the

inside and outside of Main Unit, then wipe with a non-abrasive towel to dry.

3. Unplug Kettle motor and remove Kettle from support brackets.

4. Take Kettle out of the Main Unit. After removing Kettle from

Main Unit, fill 2/3 of Kettle with hot, soapy water.

5. Let the Kettle sit for 15 - 20 minutes to cut the grease. (time may vary - use

your own judgment depending on the amount of cleaning necessary)

6. Empty water. If necessary, use the scrubber side of a

cleaning sponge to scrub inside of Kettle.

7. Rinse inside carefully and dry.

8. Wipe outside of Kettle with damp cloth and dry.

NOTE: To protect the motor plug from getting wet, never immerse the KettJe

in any liquid. Never place any parts in the dishwasher. Always wash by hand.

|

RECIPES

The OLD FASHIONED MOVIE TIME POPCORN CART *'_ makes hot, fresh, theater

style popcorn anytime! Enjoy your freshly popped corn in a variety of ways:

* Regular theater style popcorn - add butter and salt.

* Add a pinch of sugar and salt to popcorn for a sweet kettle corn taste.

* Flavored popcorn - add seasoning from any gourmet popcorn seasoning kit.

* Try some of these fun recipes:

. 1 Gallon of

Popped Corn

.1 Tsp Garlic

Powder

. 3 Green Onions,

finely chopped

. 1/>Tsp Cracked

Pepper

.1 Tsp Sea Salt

. 1 Cup Parmesean

Cheese, grated

(more or less

to taste)

* 3 Tbsps Olive

Oil, heated

Pop corn kernels using the OLD FASHIONED MOVIE

TIME POPCORN CART T'_as directed on page 9.

Combine garlic powder, green onions, cracked

pepper, sea salt and parmesean cheese. Set aside.

Jn a large mixing bowl, drizzle hot

olive oil over popcorn.

Toss until well coated.

Slowly add in dry ingredients while continuously

strirring popcorn until well coated.

You may also shake the dry ingredients over

popcorn in a large paper or muslin bag.

. 1/> Cup Popcorn Pop corn kernels using the OLD FASHIONED MOVIE

. 1/> Cup Corn Syrup

. 1/_ Cup Granulated

Sugar

. 1/>Teaspoon Salt

* 1 Stick of Butter,

softened

TIME POPCORN CART "_ as directed on page 9.

Mix corn syrup, sugar and salt together in pot and

dissolve over medium heat for about 3 minutes.

Add popcorn to pot, stirring and tossing consistently

until popcorn is evenly coated at low heat.

Remove from heat.

Use softened butter to form balls while

popcorn mixture is still warm.

Wrap individual balls in plastic wrap, tie

and store at room temperature.

|

* 1 Gallon Popcorn Pop corn kernels using the OLD FASHIONED MOVIE

* 1 12-oz bag

Semi-Sweet

Chocolate Chips

* 1 12-oz bag Peanut

Butter Morsels

* 4.2 oz bag Banana

Chips, broken

into small pieces

* 1 1-oz bag Peanuts

TIME POPCORN CART T'_as directed on page 9.

Melt chocolate chips and peanut butter morsels

over stove, as packaging recommends.

Line cookie sheet with wax paper.

Toss together popcorn and banana chips.

Spread popcorn and banana chip

mixture evenly over cookie sheet.

Drizzle melted chocolate and peanut butter

mixture over popcorn and banana chips.

Sprinkle peanuts over chocolate

and peanut butter mixture.

Allow to cool.

When chocolate and peanut butter has hardened,

break up the Chunky Monkey into pieces.

Can be stored in plastic freezer bags.

. 1 Gallon

Popped Corn

* 1 12-oz bag Semi-

Sweet or Dark

Chocolate Chips

® 1 1/4 cup Peppermint

Sticks, crushed

Pop corn kernels using the OLD FASHIONED MOVIE

TIME POPCORN CART T'_as directed on page 9.

Melt chocolate chips over stove,

as packaging recommends.

Line cookie sheet with wax paper.

Spread popcorn evenly over cookie sheet.

Drizzle melted chocolate over popcorn.

Sprinkle crushed peppermints over chocolate.

Allow to cool.

When chocolate has hardened, break up

Popcorn Peppermint Bark into pieces.

Can be stored in plastic freezer bags.

RETURNS&WARRANTY

SHOULD YOUR UNIT NOT WORK OR IS DAMAGED WHEN

YOU FIRST TAKE iT OUT OF THE BOX, PLEASE RETURN

iT TO THE PLACE OF PURCHASE IMMEDIATELY.

OLD FASHIONED MOVIE TIME POPCORN CART'" /CCP510

Should you have any questions, please contact us via email or at the

customer service number listed below between the hours of 8:00 AM

and 5:00 PM, Monday through Friday, Central Standard Time.

Distributed by:

Nostalgia Products Group LLC

1471 Partnership Dr.

Green Bay, Wm54304-5685

Customer Service

Phone: (920) 347-9122

Web: www. host algiaelect rics.com

Customer Service Inquiry

To submit a Customer Service inquiry, go to www.nostalgiaelectrics.com and

fill out the Customer Service inquiry form and click the Submit button.

A representative will contact you as soon as possible.

This appliance is designed and built to provide many years of satisfactory

performance under normal household use. The distributor pledges to the

original owner that should there be any defects in material or workmanship

during the first 90 days of purchase, we will repair or replace the unit at

our option. Our pledge does not apply to damages caused by shipping,

mishandling or unit being dropped. A product deemed defective either from

manufacturing or being mishandled is up to the distributor's discretion.

in order to obtain service under this warranty, please contact Nostalgia

Products Group, LLC at the telephone number listed above or by filling out

the Customer Service inquiry Form located at www.nostalgiaelectrics.com.

This warranty does not apply to re-manufactured merchandise,

Please read these instructions carefully. Failure to comply with these instructions,

damages caused by improper replacement parts, abuse or misuse will void this

pledge to you and is being made in place of all other expressed warranties.