NVIDIA P2450A Tegra 4 Portable Gaming Device User Manual
NVIDIA Corporation Tegra 4 Portable Gaming Device Users Manual
NVIDIA >
Contents
- 1. User Manual
- 2. Users Manual
Users Manual
TEGRAZONE QUICK START GUIDE TIP: Navigate through TegraZone using the d-pad or left stick. Jump to each section using the bumpers. Thank you for choosing NVIDIA® SHIELD™. The following equipment is included in the SHIELD box. SHIELD STORE: Browse and download the latest SHIELD-optimized games. After setup is complete, you can press the NVIDIA button at any time to launch TegraZone to play SHIELD games, find new games, and stream games from your GeForce GTX PC. WELCOME! SHIELD 2. AC Adapter to see the complete library of available SHIELDPress down optimized Android games. USB Cable To charge your SHIELD, connect the included USB cable to the micro-USB port on the back side of the device. Micro-USB Charge indicator light MicroSD card slot MICRO SD Mini-HDMI 1. 3.5 mm headphone jack with mic support SHIELD GAMES: Recently played and downloaded SHIELD-optimized games will appear here. TIP: For the fastest charging time, NVIDIA recommends using the included USB cable and AC adapter. 3. SETUP 1. Press the NVIDIA button to power on your SHIELD. Press down 2. PC Games: Connect to your GeForce GTX PC here to stream PC games. to see all your installed SHIELD-optimized games. The SHIELD device tutorial will walk you through some basic button and overview functions. TIP: For GeForce game streaming system requirements and setup information, please visit shield.nvidia.com/pc. 3. Once you finish the SHIELD device tutorial, follow the instructions in the Android setup wizard to connect to your Wi-Fi and log-in to your existing Google account. If you don’t have an existing Google account, you have the option to create one. TIP: Use either the touch screen display or the physical controls to navigate and type. © 2013 NVIDIA Corporation. All rights reserved. NVIDIA, the NVIDIA logo, GeForce, SHIELD, and TegraZone are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S. and other countries. © 2013 Google Inc. All rights reserved. Android and Gmail are trademarks of Google Inc. © 2013 OneQ Soft Co., Ltd. All rights reserved. Blood Sword: Sword of Ruin is a trademark of OneQ Soft Co., Ltd. © 2013 Vivid Games S.A. Real Boxing is a trademark of Vivid Games. SEGA is registered in the U.S. Patent and Trademark Office. SEGA, the SEGA logo, the SONIC TEAM logo, and SONIC THE HEDGEHOG are either registered trademarks or trademarks of SEGA Corporation. © SEGA. All rights reserved. ©2013 Riptide GP is a trademark of Vector Unit. All other trademarks are the property of their respective owners. 176-0168-000 Compliance The NVIDIA SHIELD is compliant with the following regulations: Federal Communications Commission (FCC) Industry Canada (IC) Underwriters Laboratories (UL , cUL ) UNITED STATES Federal Communications Commission (FCC) FCC ID: VOB-P2450A. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: The FCC requires that you be notified that any changes or modifications to this device not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Canada Industry Canada (IC) 7361A-P2450A CAN ICES-3(B)/NMB-3(B). This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Ce dispositif est conforme à la norme CNR‐210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Safety Underwriters Laboratories (UL)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Extract Create Date : 2013:05:21 10:47:12-07:00 Creator : Adobe Acrobat Pro 10.0.0 Modify Date : 2013:05:29 10:24:10-07:00 Title : XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2013:05:29 10:24:10-07:00 Creator Tool : Adobe Acrobat Pro 10.0.0 Format : application/pdf Document ID : uuid:d882b97e-928d-4e6d-b553-87c1e394aa70 Instance ID : uuid:4c1924cd-ec51-4e66-b0a6-671e4372d3a7 Producer : Adobe Acrobat Pro 10.0.0 Page Count : 3EXIF Metadata provided by EXIF.tools