NYNE MULTIMEDIA ADVENTURE NYNE ADVENTURE User Manual
NYNE MULTIMEDIA INC. NYNE ADVENTURE
user manual
EN
Charge the speaker until the LED light beside the
button turns solid white.
Tips: If the LED light ashes white slowly, it
indicates that the battery is low and needs to
be recharged.
ES
Cargue el altavoz hasta que la luz LED al lado del
botón se vuelva a color blanco sólido.
Consejos: Si la luz LED parpadea en
blanco lentamente, indica que la batería
está baja y necesita ser recargada.
EN
Press to power on.
)For rst-time use, the Bluetooth indicator ashes
blue quickly, indicating that the speaker is in
pairing mode.
Tips:
When you power on the speaker again after
Bluetooth setup, the speaker will search for the
previously paired device and the Bluetooth
indicator will ash slowly. If no paired device is
found, it will ash quickly and the speaker will
enter pairing mode.
If there is no power to the speaker after
you press the power button, check that the
speaker is connected to AC power or the
battery is fully charged.
You can hold again to power off.
To save power, the speaker turns off
automatically after 15 minutes of inactivity.
ES
Pulse para encender.
)Cuando vaya a usarlo por primera vez, el
indicador de Bluetooth parpadea rápidamente
en azul, lo que indica que el altavoz está en
modo de sincronización.
Consejos:
Cuando vuelva a encender el altavoz
después de congurar el Bluetooth, el
altavoz buscará el dispositivo sincronizado
y el indicador de Bluetooth parpadeará
lentamente. Si no se encuentra ningún
dispositivo sincronizado, parpadeará
rápidamente y el altavoz pasará a modo de
sincronización.
Si el altavoz no se enciende tras pulsar el
botón de encendido, compruebe que el
altavoz está conectado a la fuente de CA o
que la batería está totalmente cargada.
Puede mantener presionado el botón de
nuevo para apagar.
Para ahorrar energía, el altavoz se apaga
automáticamente después de 15 minutos de
inactividad.
EN
1 Make sure that the speaker is in pairing mode.
2 Enable Bluetooth on your device to be paired
with the speaker.
Select ‘NYNE Adventure’ from the available
devices (enter the password ‘0000’ if necessary)
to start pairing and connection with the
speaker.
3 After successful connection, the Bluetooth
indicator turns solid blue and the speaker
beeps.
Tips: This speaker supports automatic
connection with a previously paired device
after power-off and power-on again.
You can press and hold for more than 2
seconds to enter manual pairing mode. In this
way, you can pair the speaker with a new
Bluetooth device.
You can press and hold for more than 8
seconds to clear all paired Bluetooth devices.
ES
1 Asegúrese de que el altavoz está en modo de
sincronización.
2 Active la opción Bluetooth en su dispositivo
para sincronizarlo con el altavoz.
Seleccione ‘NYNE Adventure’ entre los
dispositivos disponibles (introduzca la
contraseña “0000” si es necesario) para iniciar
la sincronización y la conexión con el altavoz.
3 Cuando se ha conectado, el indicador
Bluetooth se vuelve de color azul sin parpadear
y el altavoz emite un pitido.
Consejos: Este altavoz permite realizar
una conexión automática con un dispositivo
previamente sincronizado tras apagarlo y
volverlo a encender.
Puede pulsar durante 2 segundos para
pasar a modo de sincronización manual. De
este modo, podrá sincronizar el altavoz con
un nuevo dispositivo Bluetooth.
Puede pulsar durante 8 segundos para
borrar todos los dispositivos Bluetooth
sincronizados.
EN
Play music on your device paired and connected
with the speaker.
During music play:
•Press +/- to adjust volume.
•Press to skip to the previous or next
song.
•Press to pause or resume music play.
When you make a call or there is an incoming call,
you can use the speaker as a speaker phone.
• When there is an incoming call, you can press
to receive the call.
• During a call, you can press to end the call.
•
Tips: Music play is paused during a call
and resumed automatically when the call
ends.
You can press and hold to disconnect
the current Bluetooth connection.
ES
Reproduzca música en su dispositivo sincronizado y
conectado con el altavoz.
Durante la reproducción de música:
•Pulse +/- para ajustar el volumen.
• Pulse para pasar a la canción anterior
o la siguiente.
• Pulse para pausar o reanudar la
reproducción de música.
Cuando realice o reciba una llamada, puede
utilizar el altavoz como manos libres.
•Cuando reciba una llamada, pulse para
responderla.
•Durante una llamada, puede pulsar para
nalizarla.
Consejos: La reproducción de música
se pausa durante una llamada y se reanuda
automáticamente cuando naliza la llamada.
Puede mantener pulsado durante unos
segundos para desactivar la actual conexión
Bluetooth.
Adventure
All registered and unregistered trademarks are
property of their respective owners.
Nyne Multimedia Inc.
All rights reserved.
QUG-Adventure-06-06-2017-V1.0
nyne.com
NYNE Adventure
2
1
Quick User Guide
Guía rápida del usuario
Portable Bluetooth Speaker
Altavoz Bluetooth portátil
ES
EN
ES
EN
EN
1 Connect an auxiliary audio device to the
speaker through the 3.5mm audio port.
2 Play and control music on the audio device,
and use +/- on the speaker to adjust volume if
necessary.
Tips: When the 3.5mm audio cable is
plugged in, the speaker switches to LINE IN
mode automatically. When it is unplugged,
the speaker switches back to Bluetooth mode
and connects with the previously paired
device automatically. If no device is available,
the speaker enters pairing mode.
During playback, you can press to pause
or resume sound output.
ES
1 Conecte un dispositivo de audio auxiliar al
altavoz utilizando el cable de audio de 3,5 mm.
2 Reproduzca y administre su música en el
dispositivo de audio y utilice +/- en el altavoz
para ajustar el volumen si es necesario.
Consejos: Cuando conecte el cable
de audio de 3,5 mm, altavoz pasa
automáticamente a modo de entrada
auxiliar. Cuando se desconecta, el altavoz
vuelve a modo Bluetooth y se conecta
automáticamente al dispositivo previamente
sincronizado. Si no hay dispositivos disponibles,
el altavoz pasa a modo de sincronización.
Durante la reproducción, puede presionar
para pausar o reanudar la salida de sonido.
NYNE Adventure - QUG_V1.0_20170606.indd 1-4 6/6/2017 3:57:56 PM
Notice
Modification
Any modication (such as removing the speaker grill)
to the device, without prior authorization from the
manufacturer, may void your warranty and authority
to operate the device.
FCC compliance statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
•Relocate the receiving antenna.
•Increase the separation between the equipment
and receiver.
•Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
This device complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with a minimum distance of 20cm between the
radiator and your body.
This device and its antenna(s) must not be co-located
or conjunction with any other antenna or transmitter.
Recycling
Packaging
Observe the local regulations for how to dispose of
the packaging materials.
Instructions for Users on Removal, Recycling and Disposal of Used
Batteries
To remove the batteries from your equipment or
remote control, reverse the procedure described in
the owner’s manual for inserting batteries.
For products with a built-in battery that lasts for the
lifetime of the product, removal may not be possible
for the user. In this case, recycling or recovery centers
handle the dismantling of the product and the
removal of the battery. If, for any reason, it becomes
necessary to replace such a battery, this procedure
must be performed by authorized service centers. In
the European Union and other locations, it is illegal to
dispose of any battery with household trash. All batteries
must be disposed of in an environmentally sound
manner. Contact your local waste-management ofcials
for information regarding the environmentally sound
collection, recycling and disposal of used batteries.
WARNING: Danger of explosion if battery is
incorrectly replaced. To reduce risk of re or burns,
don’t disassemble, crush, puncture, short external
contacts, expose to temperature above 60°C
(140°F), or dispose of in re or water. Replace only
with specied batteries.
The symbol indicating ‘separate collection’ for all
batteries and accumulators shall be the crossedout
wheeled bin shown below:
In case of batteries, accumulators and button cells
containing more than 0.0005 % mercury, more than
0.002 % cadmium or more than 0.004 % lead, shall
be marked with the chemical symbol for the metal
concerned: Hg, Cd or Pb respectively. Please Refer
to the below symbol:
Copyright
The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks by
Nyne Multimedia Inc. is under license.
Specifications
The technical specications are subject to change
without prior notice.
DC power input DC 5V 2A
Speaker drivers 2 x 3.5 inches
S/N >70dB
THD+N <10%
Dimension 13.74 (W) x 6.69 (H) x 7.16 (D)
inches
Weight 2.11 kg
Audio input 1 x 3.5 mm socket
1 x wireless input (Bluetooth)
Wireless Bluetooth 2.1 + EDR (Class 2)
Bluetooth proles HFP, A2DP, AVRCP
Battery capacity 7.4V 2200mAh
Battery type Lithium-ion
Play time 10 - 12 hours
EN
Important
Safety
The lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of un-isolated, dangerous
voltage within the inside of the device
that may be of sufcient magnitude
to constitute a risk of electric shock to persons.
Warning: To reduce the risk of electric shock, do
not remove cover (or back) as there are no user-
serviceable parts inside. Refer servicing to qualied
personnel.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
servicing instructions in the literature
accompanying the device.
WARNING: To reduce the risk of re or electric shock,
do not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or
splashing and that objects lled with liquids, such as
vases, shall not be placed on apparatus.
WARNING: Where the mains plug/appliance coupler
is used as the disconnect device, the disconnect
device shall remain readily operable.
WARNING: The battery (battery or batteries or
battery pack) shall not be exposed to excessive heat
such as sunshine, re or the like.
Read these instructions before operation.
Keep these instructions for future reference.
Follow all instructions for installation, use and
maintenance of the device.
To clean the device, disconnect power rst. Clean
only with soft and dry cloth.
To ensure compatibility, only use accessories
recommended by the manufacturer.
When the device is suddenly moved from cold
to warm surroundings, condensation may form in
the housing of the device. Before use, leave the
device in the warm environment until the moisture
evaporates.
Keep the device away from heat sources, such as
a radiator, heater, oven, amplier, naked ames or
direct sunlight.
No naked ame sources, such as lighted candles,
should be placed on the apparatus.
Never block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
•Do not expose the device to sand or dust, or
cover it with items, such as newspapers, table
cloths, or curtains.
•Do not operate the device in an enclosed
cabinet. Leave sufcient free space around the
device for adequate ventilation.
Do not attempt to repair or service the device
yourself. Opening or removing the cabinet may
expose you to electric shock, and other hazards. If
repair is required, contact your dealer and refer all
servicing to qualied service personnel.
Do not use the device if any abnormality occurs. If
any smoke or odor becomes apparent, contact your
dealer immediately. Do not try to repair the device
yourself.
Avoid using dropped or damaged appliances. If the
device is dropped and the housing is damaged, the
internal components may not function normally. Stop
use and contact your dealer for repair. Continued
use of the device may cause re or electric shock.
To reduce the risk of electric shock, do not touch any
connector with wet hands.
Never remove the housing of the device.
Never lubricate any part of the device.
Never place the device on top of any other
electrical equipment.
This equipment is a Class II or double insulated
electrical appliance. It has been designed in such a
way that it does not require a safety connection to
electrical earth.
EN
Charge your mobile device through the 5V 1A
charging socket.
ES
Cargue su dispositivo móvil por medio de la
entrada de carga de 5 V y 1 A.
NYNE Adventure - QUG_V1.0_20170606.indd 5-8 6/6/2017 3:57:57 PM
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.