Nad L55 Users Manual

Nad-Electronics-L55-Users-Manual-475618 nad-electronics-l55-users-manual-475618

L55 to the manual b0611a3c-03bf-4650-8d16-d628aa7ff6b0

: Nad Nad-L55-Users-Manual-493068 nad-l55-users-manual-493068 nad pdf

Open the PDF directly: View PDF .
Page Count: 42

L55

DVD / Video CD / CD Player

Owner’s Manual

GB

Manuel d’Installation

F

Bedienungsanleitung

D

Manual del Usuario

E

Manuale delle Istruzioni

I

Manual do Proprietário

P

Bruksanvisning

S

GB

2

SAFETY PRECAUTIONS

Introduction

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that

may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence

of important operating and maintenance (servicing) instructions in the literature accompanying

the appliance.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR

MOISTURE.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION

This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this

owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an

authorized service location. (See service procedure). Use of controls, adjustments or the performance of

procedures other than those specified may result in exposure to laser radiation. To prevent direct exposure

to laser beam, do not try to open the enclosure. Visible laser radiation when the enclosure is opened.

DO NOT STARE INTO BEAM.

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

INDUSTRY CANADA REQUIREMENT

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations.

RECORD YOUR MODEL NUMBER (Now, while you can see it)

The model and serial number of your new DVD player are located on the back of the DVD player cabinet.

For your future convenience, we suggest that you record these numbers here:

MODEL NO :

SERIAL NO.:

GB

3

TABLE OF CONTENTS

Introduction

INTRODUCTION

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Identification of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-11

Front Panel/Display window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Preparing the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Operating with the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

INSTALLATION

Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Connecting to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Connecting to Optional Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-16

Enjoying Dolby Digital (AC-3) Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Enjoying Dolby Pro Logic Surround Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Enjoying 2 Channel Digital Stereo Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Enjoying DTS Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

BASIC OPERATION

Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17-19

Various speed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

OPERATION USING DISPLAY MENU ICONS

General Information about Display Menu Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Detailed description of each Display Menu Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

ADVANCED OPERATION

Using a title menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Using a DVD menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Changing subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Changing audio soundtrack language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Viewing from another angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Producing a 3D Surround effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Zoom Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Memorizing Settings for Viewed DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Program Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

INITIAL SETTINGS

Common procedures of initial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Selecting disc Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Selecting rating level and password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-33

Selecting TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Selecting Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Selecting TV Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Selecting Pseudo PAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Setting the TV system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Selecting Digital Audio Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Table of Languages and Their Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

REFERENCE

Disc Requirements/Copyright Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Before Calling Service Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

GB

4

IMPORTANT SAFETY INSTRUCTIONS

Introduction

CAUTION

PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL

AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This set has been designed and manufactured to assure personal safety. Improper use can result in electric

shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following

procedures for installation, use and servicing.

This unit is fully transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1 Read owner’s manual - After unpacking this product, read the owner’s manual carefully and follow

all the operating and other instructions.

2 Power Sources - This product should be operated only from the type of power source indicated on

the marking label. If you are not sure of the type of power supply in your home, consult your product

dealer or local power company. For products intended to operate from battery power or other sources,

refer to the operating instructions.

3 Grounding or Polarization - This product is equipped with a polarized alternating current line plug

(a plug having one blade wider than the other). This plug will fit into the power outlet only one way.

This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.

If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat

the safety purpose of the polarized plug.

4 Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves

or other products (including amplifiers) that produce heat.

5 Water and Moisture - Do not use this product near water-for example, near a bath tub, wash bowl,

kitchen sink. or laundry tub; in a wet basement; or near a swimming pool and the like.

6 Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

7 Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked

on or pinched by items placed upon or against them, playing particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the product.

8 Overloading - Do not overload wall outlets, extension cords or integral convenience receptacles as this

can result in a risk of fire or electric shock.

9 Lightning - For added protection of this product during storms, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product

due to lightning and power-line surges.

10 Object and Liquid Entry - Never push objects of any kind into this product through openings as they

may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never

spill liquid of any kind on the product.

11 Attachments - Do not use attachments not recommended by the product manufacturer as they may

cause hazards.

GB

5

IMPORTANT SAFETY INSTRUCTIONS

Introduction

12 Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The

product may fall, causing serious injury to a child or adult and serious damage to the product. Use

only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the

product. Any mounting of the product should follow the manufacturer’s instructions, and should use

a mounting accessory recommended by the manufacturer. A product and cart combination should

be moved with care. Quick stops, excessive force and uneven surfaces may cause the product and

cart combination to overturn.

13 Disc Tray - Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal

injury.

14 Burden - Do not place a heavy object on top of the product. The object may fall, causing serious

personal injury and serious damage to the product.

15 Connecting - When you connect the product to other equipment, turn off the power and unplug all

of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious

personal injury. Read the owner’s manual of the other equipment carefully and follow the

instructions when making any connections.

16 Sound Volume - Reduce the volume to the minimum level before you turn on the product.

Otherwise, sudden high volume sound may cause hearing or speaker damage.

17 Sound Distortion - Do not allow the product to output distorted sound for a longtime. It may

cause speaker overheating and fire.

18 Headphones - When you use headphones, keep the volume at a moderate level. If you use the

headphones continuously with high volume sound, it may cause hearing damage.

19 Laser Beam - Do not look into the opening of the disc tray or ventilation opening of the product to

see the source of the laser beam. It may cause sight damage.

20 Disc - Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause

serious personal injury and product malfunction.

21 Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the product.

• If the product has been exposed to rain or water.

• If the product does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions as an improper adjustment of other controls

may result in damage and will often require extensive work by a qualified technician to restore the

product to its normal operation.

• If the product has been dropped or damaged in any way.

• When the product exhibits a distinct change in performance (This indicates a need for service).

22 Servicing - Do not attempt to service this product yourself as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

23 Replacement parts - When replacement parts are required, be sure the service technician has used

replacement parts specified by the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

24 Safety Check - Upon completion of any service or repairs to this product, ask the service technician

to perform safety checks to determine that the product is in proper operating condition.

GB

6

PRECAUTIONS

Introduction

NOTES ON HANDLING

• When shipping the DVD player, always use the original shipping carton and packing materials. For

maximum protection, repack the unit as it was originally packed at the factory.

• Do not use volatile liquids, such as insect spray, near the DVD player. Do not leave rubber or plastic

products in contact with the DVD player for a long time. They will leave marks on the finish.

• The top and rear panels of the DVD player may become warm after a long period of use. This is normal

and not a malfunction.

• When the DVD player is not in use, be sure to remove the disc and turn off the power.

• If you do not use the DVD player for a long period, the unit may not function properly in the future.

Turn on and use the DVD player occasionally.

NOTES ON LOCATING

• When you place this DVD player near a TV, radio, or VCR, the playback picture may become poor and

the sound may be distorted. In this case, move the DVD player away from the TV, radio, or VCR.

NOTES ON CLEANING

Use a soft, dry cloth for cleaning.

• For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to

wipe it dry. Do not use any type of solvent, such as thinner and benzine, as they may damage the

surface of the DVD player.

• If you use a chemical saturated cloth to clean the unit, follow that product’s instructions.

WARNING

Cleaning and adjustment of lenses and/or other components of playback mechanism should be performed

by a qualified service technician.

TO OBTAIN A CLEAR PICTURE

The DVD player is a high technology, precision device. If the optical pick-up lens and disc drive parts are

dirty or worn down, the picture quality becomes poor. To obtain a clear picture, we recommend regular

inspection and maintenance (cleaning or parts replacement) every 1,000 hours of use depending on the

operating environment. For details, contact your nearest dealer.

NOTES ON MOISTURE CONDENSATION

Moisture condensation damages the DVD player. Please read the following carefully.

Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops

of water form on the outside of the glass. In the same way, moisture may condense on the opti-cal pick-

up lens inside this unit, one of the most crucial internal parts of the DVD player.

Moisture condensation occurs during the following cases.

• When you bring the DVD player directly from a cold place to a warm place.

• When you use the DVD player in a room where you just turned on the heater, or a place where the

cold wind from the air conditioner directly hits the unit.

• In summer, when you use the DVD player in a hot and humid place just after you move the unit from

an air conditioned room.

• When you use the DVD player in a humid place.

• Do not use the DVD player when moisture condensation may occur. If you use the DVD player in such

a situation, it may damage discs and internal parts. Remove the disc, connect the power cord of the

DVD player to the wall outlet, turn on the DVD player and leave it “ON” for two or three hours. After

two or three hours, the DVD player will have warmed up and evaporated any moisture. Keep the DVD

player connected to the wall outlet and moisture condensation will seldom occur.

GB

7

Introduction

This section shows you how to handle, clean and store discs.

ON HANDLING DISCS

• Do not touch the playback side of the disc.

• Do not attach paper or tape to discs.

ON CLEANING DISCS

• Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center

outward with a soft cloth. Always keep the disc clean.

• If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft

cloth and finish with a dry cloth. Do not use any type of solvents such as thinner, benzine, commercially

available cleaners or anti-static spray for vinyl LPs. They may damage the disc.

ON STORING DISCS

• Do not store discs in a place subject to direct sunlight or near heat sources.

• Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier.

• Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause

warping.

ABOUT THIS OWNER’S MANUAL

• This owner’s manual explains the basic instructions of this DVD player.

• Some DVD video discs have functions that may not be explained in this owner’s manual. Therefore,

some instructions may differ from this owner’s manual, and there may be extra instructions. In this case,

follow the instructions displayed on the TV screen or package.

• “ “ may appear on the TV screen during operation. This icon means the function explained in this

owner’s manual is not available on that specific DVD video disc.

NOTES ON DISCS

GB

8

IDENTIFICATION OF CONTROLS

Introduction

FRONT PANEL

DISPLAY WINDOW

POWER indicator (Standby mode: Blue color)

Disc tray PLAY button

PAUSE/STEP button

STOP button

SKIP/SCAN buttons

OPEN/CLOSE button

DISPLAY WINDOW

REMOTE SENSOR

POWER button

OPERATING STATUS indicator

VCD indicator

CD indicator

DVD indicator

PROGRAM indicator

Repeat playback mode indicators

TOTAL PLAYING TIME /

ELAPSED TIME indicator

CHP/TRK NUMBER indicator

TITLE NUMBER indicator

ANGLE ICON indicator

GB

9

IDENTIFICATION OF CONTROLS

Introduction

REAR PANEL

EUROPEAN VERSION

S-VIDEO OUT jack

COMPOSITE VIDEO OUT jack

AUDIO MIXED OUT jacks

EURO AV-TV-VCR OUT jack

OPTICAL DIGITAL AUDIO OUT jack

DIGITAL AUDIO OUT jacks (COAXIAL)

POWER CORD

Connect to an AC 230V,

50Hz outlet only

COMPONENT VIDEO OUT jack

COMPOSITE VIDEO OUT jack

AUDIO MIXED OUT jacks

S-VIDEO OUT jack

OPTICAL DIGITAL AUDIO OUT jack

DIGITAL AUDIO OUT jacks (COAXIAL)

POWER CORD

Connect to an AC 110V,

60Hz outlet only

USA/CANADA VERSION

OPTICAL DIGITAL AUDIO OUT JACK

Remove the dust protection cap from the connector and connect the optical digital cable (not supplied) firmly so that the configurations of both the

cable and the connector match. Keep the dust protection cap and always reattach the cap when not using the connector to protect against dust.

Dust protection cap

GB

10

IDENTIFICATION OF CONTROLS

Introduction

REMOTE CONTROL

You will find instructions for each of the remote control functions in the appropriate sections of this instruction manual.

(Remote control unit is included in L75 AV Surround Receiver)

TITLE BUTTON

Use the TITLE button to display

the title screen included on DVD

video discs. To operate a menu

screen, follow the instructions in

“Using a Title Menu” (page 23).

DIRECTIONAL ARROW

BUTTONS

(up, down, left, right) for use in

highlighting a selection on a

DISPLAY menu screen, TITLE and

MENU screen.

MENU BUTTON

Use the MENU button to display

the menu screen included on DVD

video discs. To operate a menu

screen, follow the instructions in

“Using a DVD Menu” (page 23).

REMOTE SELECT

Using the power, numbers, set

up, display & arrow buttons for

DVD player, change the switch to

DVD position.

Power button

Number buttons

SET UP button

TITLE button

ARROW Buttons

RETURN button

OPEN/CLOSE button

PAUSE/STEP button

REPEAT button

CLEAR button

AUDIO button

PROGRAM button

DISPLAY button

MENU button

ENTER button

MUTE button

PLAY button

STOP button

SKIP/SCAN buttons

SLOW button

ANGLE button

ZOOM button

SUB TITLE button

REMOTE SELECT

GB

11

IDENTIFICATION OF CONTROLS

Introduction

PREPARING THE REMOTE CONTROL

Insert the batteries into the remote control so you can use it to operate the DVD player.

1 Open the battery cover.

2 Insert batteries (AAA size). Make sure to match the + and - on the batteries to the marks inside the

battery compartment.

3 Close the cover.

NOTES ON BATTERIES

• Improper use of batteries may cause battery leakage and corrosion.

• To operate the remote control correctly, follow the instructions.

• Do not insert the batteries into the remote control in the wrong direction.

• Do not charge, heat, open or short-circuit the batteries. Do not throw the batteries into fire.

• Do not leave dead or exhausted batteries in the remote control.

• Do not use different types of batteries together, or mix old and new batteries.

• If you do not use the remote control for a long period of time, remove the batteries to avoid possible

damage from battery corrosion.

• If the remote control does not function correctly or if the operating range becomes reduced, replace

all batteries with new ones.

• If battery leakage occurs, wipe the battery liquid from the battery compartment, then insert new

batteries.

• The batteries should last about one year with normal use.

OPERATING WITH THE REMOTE CONTROL

This section shows you how to use the remote control.

Point the remote control at the remote sensor and press the buttons.

Distance: About 23 ft (7 m) from the front of the remote sensor

Angle: About 30° in each direction of the front of the remote sensor

• Do not expose the remote sensor of the DVD player to a strong light source such as direct sunlight or

illumination. If you do so, you may not be able to operate the DVD player with the remote control.

NOTES ON THE REMOTE CONTROL

• Direct the remote control at the remote sensor of the DVD player.

• Do not drop or give the remote control a shock.

• Do not leave the remote control near extremely hot or humid place.

• Do not spill water or put anything wet on the remote control.

• Do not open the remote control.

GB

12

CONNECTING TO A TV

Installation

CONNECT THE DVD PLAYER TO YOUR TV

To COMPONENT VIDEO OUT (USA/CANADA VERSION)

To S-VIDEO OUT

To SCART VIDEO

OUT (EUR VERSION) To AUDIO OUT (L/R)/VIDEO OUT

If the TV has an S-

video input, connect

the DVD player with

the S-video cable.

COMPONENT VIDEO

(Cable not supplied)

AUDIO/VIDEO cable (supplied)

TV or monitor with

audio/video inputs

To audio inputs

To video input

SCART VIDEO cable (not supplied)

S-video cable (not supplied)

NOTES

• Refer to the owner’s manual of your TV as well.

• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any

connections.

• Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted because DVD video

discs are copy protected.

• To connect with S-video or SCART VIDEO (Component Video), you have to select TV output mode properly (Refer to “selecting TV Output” on

Page 35).

GB

13

CONNECTING TO AN AUDIO SYSTEM

Installation

NOTES

• Refer to the owner’s manual of your audio system as well.

• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before

making any connections.

• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD player away from the

tuner and radio.

• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,

the speakers may be damaged by a sudden high volume sound.

• Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be

damaged.

WARNING

Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL AUDIO jack of this DVD player

to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to

“Selecting Digital Audio Output” on page 37).

YOU CAN LISTEN TO THE SOUND OF AUDIO CDS AND DVD VIDEO DISCS IN STEREO

To S-VIDEO OUT

To VIDEO OUT

If the TV has an S-video

input, connect the DVD

player with the

S-video cable.

Audio System

To audio inputs of

the amplifier

Audio Cable (Supplied)

To video input (yellow)

S-video cable (not supplied)

TV or monitor with

audio video inputs

Video cable (Supplied)

NOTES

To enjoy Dolby Digital sound from this DVD player you need the following:

• DVD recorded in Dolby Digital

• 6 channel receiver equipped with a Dolby Digital decoder or Dolby Digital processor and power receiver

• 5 speakers and 1 subwoofer

• To enjoy Dolby Digital sound, you need to select “Dolby Digital” on the SETUP menu.

GB

14

CONNECTING TO OPTIONAL AUDIO SYSTEM

Installation

ENJOYING DOLBY DIGITAL SOUND

You can enjoy the high quality dynamic sound of Dolby Digital (AC-3), Dolby Pro Logic, and 2 Channel Digital Stereo.

DOLBY DIGITAL

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the

home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD player to a 6 channel

receiver equipped with a Dolby Digital (decoder or Dolby Digital processor).

L75 Rear

To S-VIDEO OUT or

VIDEO OUT

S-Video cable or Video cable

To DIGITAL OUT (COAXIAL or OPTICAL)

Receiver equipped

with a Dolby

Digital decoder

To S-video input or

Video Input

To digital audio input Connection

example

L75AV Receiver

Front

speaker

(left)

Front

speaker

(right)

Centre

speaker

Rear speaker (left

surround)

Rear speaker (right

surround)

• Refer to the owner’s manual of your audio equipment as well.

• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before

making any connections.

• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,

the speakers may be damaged by a sudden high volume sound.

• Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be

damaged.

Manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby”, and the double-D symbol are trademarks of Dolby Laboratories

Licensing Corporation. Confidential Unpublished Works. 1992-1997 Dolby Laboratories, Inc. All rights reserved.

Subwoofer

GB

15

CONNECTING TO OPTIONAL AUDIO SYSTEM

Installation

ENJOYING DOLBY PRO LOGIC SURROUND SOUND

DOLBY PRO LOGIC SURROUND

You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital (AC-3) decoding.

If your A/V receiver has a Dolby Pro Logic decoder, refer to the following connection diagram.

WITH A RECEIVER EQUIPPED WITH DOLBY DIGITAL

Connect the equipment the same way as described in “Enjoying Dolby Digital (AC-3) Sound” on the previous page. Refer to that receiver’s owner’s

manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound..

WARNING

Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL AUDIO jack of this DVD player

to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to

“Selecting Digital Audio Output” on page 37).

L75 Rear To Video Out To MIXED Audio Out

Video Cable Audio Cable

To Video Input To Audio Input

Connection example

Amplifier equipped with

Dolby Pro Logic Surround

L75 Receiver

Connect one or two rear

speakers. The output

sound from the rear

speakers will be monaural

even if you connect two

rear speakers.

Front

speaker

(Left)

Front

speaker

(Right)

Centre

Speaker

Rear speaker (Left) Rear speaker (Right)

GB

16

CONNECTING TO OPTIONAL AUDIO SYSTEM

Installation

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc..

NOTES

• Refer to the owner’s manual of your receiver as well.

• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before

making any connections.

• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,

the speakers may be damaged by a sudden high volume sound.

• Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be

damaged.

ENJOYING 2 CHANNEL DIGITAL STEREO SOUND

2 Channel Digital Stereo

You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input and

speaker system (right and left front speakers).

Connection example Receiver equipped with a

digital audio input

75 ohm coaxial cable or optical

cable

To digital out

(COAXIAL or

OPTICAL) S-video cable or

Video cable

To S-Video Input or Video Input To digital Audio Input

Front speaker

(left)

Front speaker

(Right)

TV

ENJOYING DTS SOUND

Introducing DTS Digital Surround™ …the finest technology ever invented to transform existing “home theater” systems into six discrete channels of

exceptionally clear, better-than-compact disc, digital audio performance. And DTS Digital Surround is the only 5.1 surround sound format that can

deliver this revolutionary 3-dimensional experience through new music recordings on compact discs, original 5.1 soundtracks on motion picture

laserdiscs, and soon, a wide variety of products on DVD.

Connection example

75 ohm coaxial cable or optical

cable

Receiver equipped

with a DTS decoder

To digital out

(COAXIAL or

OPTICAL)

To S-Video Input or Video Input

S-video cable

or Video cable

To digital Audio Input

Front

speaker

(left)

Front

speaker

(Right)

TV Subwoofer

Center

Speaker

Rear Speaker

(Left surround)

Rear Speaker

(Right surround)

GB

17

BASIC PLAYBACK

Basic Operation

This section shows you the basics on how to play back a DVD video disc.

PREPARATIONS

• When you want to play back DVD video discs, turn on the TV and

select the video input source connected to the DVD player.

• When you want to enjoy the sound of DVD video discs or audio CDs

from the audio system, turn on the audio system and select the input

source connected to the DVD player.

• For connection details, see pages 12 through 16.

• Set the playback picture size according to the aspect ratio of the

connected TV at the SETUP menu (TV Aspect).

• If you do not have the necessary equipment to enjoy Dolby Digital

sound, set the Digital Audio Output at the SETUP (Digital Audio

Output) menu to “PCM”.

1 Press POWER. The DVD player turns on and the power indicator

turns off.

2 Press OPEN/CLOSE. The disc tray opens. You can open the disc tray

by pressing this button even if the DVD player is in standby mode.

3 Place a disc on the disc tray with the playback side down. There

are two different disc sizes. Place the disc in the correct guide on the

disc tray. If the disc is out of the guide, it may damage the disc and

cause the DVD player to malfunction. Do not place anything except

3” discs or 5” discs on the disc tray.

4 Press PLAY. The disc tray is automatically closed and playback

begins. If the disc is placed in upside down (and it is a single sided

disc), “NO DISC” or “DISC ERROR” appears on the TV screen.

Operating status indicator

• If you insert an audio CD, the CD indicator lights up in the DVD

display. The title number does not appear.

• After playing back all of the chapters in the title, the DVD player

automatically stops and returns to the menu screen.

WHEN A MENU SCREEN APPEARS ON THE TV SCREEN

In case of interactive DVDs with control, a menu screen appears on the

TV screen. Perform step 5 on page 18 to start play.

1

2 4

Example of interactive DVD

On-Screen Menu.

GB

18

BASIC PLAYBACK

Basic Operation

5 Press and press ENTER, or press the numeric

button(s), to select the desired item.

Play of the selected item now begins.

For further info, also refer to the jacket or case of the disc you are

playing.

AFTER OPERATION

When the unit is not in use, remove the disc and press POWER to turn

off the power.

NOTES

• Do not move the DVD player during playback. Doing so may damage

the disc and the DVD player.

• Use the OPEN/CLOSE button on the remote control or DVD player to

open and close the disc tray. Do not push the disc tray while it is

moving. Doing so may cause the DVD player to malfunction.

• Do not push up the disc tray or put any objects other than discs on

the disc tray. Doing so may cause the DVD video player to

malfunction.

• Keep your fingers well clear of the disc tray as it is closing. Be

especially careful with children’s fingers around the closing disc tray

as there is a risk of personal injury.

• When “ “ appears on the TV screen while a button is pressed, it

means that this function is not available on the disc you are playing.

• Depending on the DVD disc, some operations may be different or

restricted. Refer to the jacket or case of the disc you are playing.

5

GB

19

BASIC PLAYBACK

Basic Operation

STOPPING PLAY

Press STOP during playback.

RESUME PLAY

• When play is stopped, the unit records the point where STOP was

pressed (RESUME function).

Press PLAY and play will resume from this point.

• The RESUME function works only with discs for which the elapsed

playing time appears on the window display during playback.

NOTES

• Resume function will be cleared when the power is turned off and

then on.

• Opening the disc tray cancels Resume function.

• The Resume function may not be available on some DVD discs.

• If the player is left in the stop mode for more than 8 minutes, the

power shuts off automatically.

STILL PICTURE (PAUSE)

Press PAUSE/STEP during playback.

• DVD The player will be placed in the still picture mode.

• CD The player will be placed in the pause mode.

FRAME ADVANCE (DVD ONLY)

Press PAUSE/STEP during still playback.

(Each time you press PAUSE/STEP, the picture advance one frame)

To resume normal playback, press PLAY.

SKIPPING FORWARD OR BACK

Skipping forward Press SKIP during playback. A chapter (DVD)

or a track (CD) is skipped each time the button is pressed.

Skipping back Press SKIP during playback. When the button is

pressed once midway through a chapter/track, the player returns to

the start of that chapter/track. When it is pressed again, a

chapter/track is skipped each time the button is pressed.

NOTE

When SKIP/SCAN button is pressed and held for more than 0.5

second, scan function will engage.

Stop

Pause Skip / Scan

Play

GB

20

VARIOUS SPEED PLAYBACK

Basic Operation

You can play back discs at various speeds, and resume normal playback.

TO PLAY IN SLOW-MOTION

Press SLOW or SLOW during playback.

• During slow playback, the playback speed and direction can be

selected with SLOW or SLOW .

• To increase the playback speed, press the one button as the playback

direction.

• To reverse the playback direction, press the other button opposite to

the playback direction.

• With Video CD, reverse play is not possible.

To return to normal playback, press PLAY button.

TO SCAN AT FAST FORWARD OR FAST REVERSE

• Fast forward and reverse, press and hold SKIP / SCAN on remote

control unit for more than 0.5 second during play-back.

• On the front panel, continue pressing the

or button.

• During fast playback, the playback speed and direction can be

selected with SKIP / SCAN .

• To increase the playback speed, press the button as the playback

direction.

• To reverse the playback direction, press the other button opposite to

the playback direction.

To return to normal playback, press PLAY

NOTES

• When SKIP/SCAN button is pressed and held for more than 0.5

second, scan function will engage.

• The DVD player does not play back sound during slow-motion

playback, the high speed reverse and forward playback of DVD video

discs. However, the DVD player plays back sound during fast forward

or fast reverse playback of audio CDs.

• Subtitles do not appear on the screen during slow motion and scan

playback.

• The DVD player provides four (4) scan speeds for DVD movie play.

Only one (1) scan speed is available dung Audio CD play.

• The DVD player does not play back in slow-motion in case of audio

CD.

• In some equipment that is connected to digital output for DTS sound,

a noise can occur during fast forward or fast reverse playback of DTS

CDs.

Skip / Scan

Play

Slow

GB

21

GENERAL INFORMATION ABOUT DISPLAY MENU ICONS

Operation Using Display Menu Icons

This unit features DISPLAY Menu Icons showing disc information (title/chapter/track number, elapsed

playing time, audio/subtitle language, angle and sound) and player information (repeat play, play mode,

etc.). Some icons only show the indicated information. Other icons allow the settings to be changed.

COMMON PROCEDURES

1 Press DISPLAY during playback.

• Title function can be accessed from the stop mode.

2 Press to select the desired item.

• The currently selected item is indicated by a yellow frame on its DISPLAY menu icons.

3 Press to select the desired setting.

• When numbers are displayed (e.g. title number), the numeric buttons can also be used for setting

instead of

• For some functions, the setting will be registered immediately; for others, ENTER must be pressed.

To clear the DISPLAY Menu Icons, press DISPLAY.

EXAMPLES OF DISPLAY MENU ICONS

The screens may differ depending on the disc contents.

2,3

1

1

1

0:16:57

1 ENG

D

6 CH

OFF

1

NORM.

TITLE

CHAPT

ALL

TRACK

OFF

1

16:57

STER.

NORM.

DVD DISPLAY CD DISPLAY DVD and CD DISPLAY

GB

22

DETAILED DESCRIPTION OF EACH DISPLAY MENU ICON

Operation Using Display Menu Icons

You can view information about a disc and its operational status on the TV screen.

1

1

0:16:57

1 ENG

D

6 CH

OFF

1

NORM.

1

16:57

STER.

NORM.

PRESS DISPLAY DURING

PLAYBACK

[TV screen] DVD DISPLAY

PRESS DISPLAY DURING

PLAYBACK

[TV screen] CD DISPLAY

To show the current title number and to jump to the desired title number + Enter, or

Numeric + Enter

To show the current chapter number and to jump to the desired chapter

number

+ Enter, or

Numeric + Enter

To show the elapsed time and directly select scenes by the desired time. SKIP, Numeric + ENTER

To show the current audio soundtrack language, encoding method, channel

number and to change the settings , AUDIO

To show the current subtitles language and to change the setting , SUBTITLE

To show the current angle number and to change the angle , ANGLE

To show the current sound (NORMAL or 3D SURROUND) and to change the

setting

To show the current track number and to jump to the desired track number + Enter, or

Numeric + Enter, or SKIP

To show the elapsed time (Display only)

To show the current audio (STEREO, LEFT, RIGHT) and to select to the desired

audio channel , AUDIO

To show the current sound (NORMAL or 3D SURROUND) and to change the

setting

FUNCTION

(Press to select desired item)

SELECTION

METHOD

FUNCTION

(Press to select desired item)

SELECTION

METHOD

NOTE

Some DVD discs may not provide all of the above DISPLAY menu icons.

GB

23

USING A TITLE MENU

Advanced Operation

Some movie discs may contain two or more titles. If the disc has a title menu recorded on it, the TITLE

button can be used to select the movie title (The details of operation differ depending on the disc used).

Selecting a title may not be possible on certain DVD discs.

1 Press TITLE. A list of the titles on the disc is displayed. Press TITLE again to resume play from the scene

when TITLE was first pressed.

2 Press and press ENTER or PLAY, or press the numeric button(s), to select desired

title. The selected title now starts playing.

Some DVDs have unique menu structures called DVD menus. For example, DVDs programmed with

complex contents provide guide menus, and those recorded with various languages provide menus for

audio and subtitle language. Although the DVD menu’s contents and operation differ from disc to disc,

the following explains the basic operation when this feature is used.

1 Press MENU during play. The DVD menu available on the disc is now displayed. Pressing MENU again

resumes play from the scene when MENU was first pressed. Resume play may not be possible on

certain discs.

2 Press and press ENTER, or press the numeric button(s), to select desired item.

The selected item is now executed.

2

1

2

1

USING A DVD MENU

GB

24

CHANGING SUBTITLE LANGUAGE

Advanced Operation

It is possible to change the subtitle language to a different language from the one selected at the initial

settings (See page 31 for further info). This operation works only with discs on which multiple subtitle

languages are recorded.

1 Press SUBTITLE during playback. When no subtitles are recorded, “OFF” will be displayed instead

of the language number.

2 Press repeatedly SUBTITLE until the desired language is selected. Number of the subtitle

language being played back.

To eliminate the On Screen Subtitles.

Press SUBTITLE repeatedly to select OFF at step 2.

NOTES

• In some cases, the subtitle language is not changed to the selected one immediately.

• When a disc supporting the closed caption is played, the subtitle and the closed caption may overlap

each other on the TV screen. In this case, turn the subtitle off.

• When the desired language is not selected even after pressing the button several times, it means that

the language is not available on the disc.

• When the power is turned on or the disc is removed, subtitles appears in the language selected at the

initial settings. If this language is not recorded on the disc, the disc’s priority language appears.

It is possible to change the audio soundtrack language to a different language from the one selected at

the initial settings in case of DVD disc (See page 31 for further info). This operation works only with discs

on which multiple audio soundtrack languages are recorded.

And it is possible to change the audio channel in case of audio CD.

DVD

1 Press AUDIO during play. Number of the audio soundtrack language being played back.

2 Press AUDIO repeatedly until the desired language is selected.

CD

1 Press AUDIO during play.

2 Press AUDIO repeatedly until the desired sound is selected.

NOTES

• When the desired language is not selected even after pressing the button several times, it means that

the language is not available on the disc.

• When the power is turned on or the disc is removed, the language heard is the one selected at the

initial settings. If this language is not recorded on the disc, only the available language on the disc will

be heard.

• Some discs may not respond to Audio feature.

1,2

1,2

OFF

1 ENG

1 ENG

D

6 CH

2 FRE

D

6 CH

STER.

LEFT

CHANGING AUDIO SOUNDTRACK LANGUAGE

GB

25

VIEWING FROM ANOTHER ANGLE

Advanced Operation

Some DVDs may contain scenes which have been shot simultaneously from a number of different angles.

For these discs, the same scene can be viewed from each of these different angles using the ANGLE button

(The recorded angles differ depending on the disc used).

1 Press ANGLE during playback. Number of angle being played back.

2 Press ANGLE repeatedly until the desired angle is selected.

NOTE

• The ANGLE indicator will blink in the DVD display window at scenes recorded at different angles to

indicate that angle switching is possible.

• The angle number can be programmed beforehand; the angle will be switched to the selected number

when the ANGLE indicator blinks.

• This function only works for discs having scenes recorded at different angles.

This unit can produce a 3D Surround effect, using Spatializer™ technology, which simulates multi-channel

audio playback from two conventional stereo speakers instead of the five or more speakers normally

required to listen to multi-channel audio from a home theater. This feature works with DVD discs encoded

with Dolby Pro Logic, Dolby Digital (AC-3) and DTS multi-channel audio tracks.

1 Press DISPLAY during playback. Using the arrow key, move the cursor to 3D SURROUND ICON.

2 Press repeatedly until the desired sound is selected.

NOTES

• This 3D Surround effect may not be available on some DVD discs, such as those recorded with a mono

audio sound-track.

• Turn off the TV surround sound and other surround effects when using this 3D surround effect.

• For best 3D Surround effect using only two speakers it is recommended that the two speakers be

positioned approximately 2m to 2.5m apart, and the listening position should be 2m to 2.5m away

from the speakers.

1,2

1

2

1

2

NORM.

3D SUR

1 2 3

PRODUCING A 3D SURROUND EFFECT

GB

26

REPEAT PLAY

Advanced Operation

REPEAT VIEWING (LISTENING)

Press REPEAT during playback. Each time this button is pressed, the TV screen changes as shown below

and the disc will repeat a chapter or title (DVD) or a track (CD).

DVD

Repeat of chapter being played

Repeat of title being played

Cancel repeat mode (normal play)

CD

Repeat of track being played

Repeat of entire disc contents

Cancel repeat mode (normal play)

To return to normal play

Press REPEAT several times until “OFF” is displayed. Notes

NOTES

• Repeat play works only with discs for which the elapsed playing time appears in the DVD display

window during playback.

• Repeat play may not work correctly with some DVDs.

Repeat

CHAPT

TITLE

OFF

TRACK

ALL

OFF

GB

27

ZOOM FEATURE

Advanced Operation

The Zoom feature allows you to “ZOOM-IN” and enlarge the picture on

the screen to either 4 times (X4) or 16 times (X16) its normal size.

1 Press ZOOM during normal playback or still playback.

• The square frame will be displayed in the center of the picture. If

any button is not pressed for more than 10 seconds, the square

frame will disappear.

• Each press of the ZOOM button changes the TV screen in the left

sequence.

• The magnification level will be displayed in the upper right corner

of the zoom area. If you press buttons the zoom

point shifts.

2 Press ENTER. The selected frame is displayed in full size on the TV

screen.

3 To resume normal playback Press ZOOM again to cancel Zoom

feature and resume normal playback or still playback.

NOTES

• Some discs may not respond to Zoom feature.

• Zoom does not work on subtitles or menus included on DVD video

discs.

1,2

1,3

X4

X16

GB

28

MEMORIZING SETTINGS FOR VIEWED DVDS (CONDITION MEMORY)

Advanced Operation

This unit will memorize the settings for DVDs you have already watched. Settings remain in memory even

if you remove the disc from the player, or switch the power OFF. Settings are stored in memory for use any

time automatically. If you load a disc that has its settings memorized, the “Memorized Disc Resume?”

message will appear on the TV screen. When you start playing the disc, the memorized settings are

automatically recalled.

You can memorize details for the following six settings.

• Latest Stop Position (Page 19)

• TV Aspect (Page 34)

• Disc Audio Language (Page 24)

• Disc Subtitle Language (Page 24)

• Disc Menu Language (Page 31)

• Angle (Page 25)

1 Load the DVD that has memorized. It will appear on the TV screen as below. If the screen is left for

more than 7 seconds, play back will start automatically.

2 Press 2 or ENTER to select “Yes”. The memorized settings are automatically recalled.

NOTES

• Settings are stored in memory for use any time automatically.

• You can store settings for up to 15 DVDs in memory. lf you memorize settings for more than 15 DVDs

and try to call up these previously memorized settings, you will get the latest settings that have taken

their place.

• Switching of the audio mode etc., is automatic on some discs.

Memorized Disc

Resume?

1. No 2. Yes

2

1

GB

29

PROGRAM PLAY

Advanced Operation

The player plays the tracks in the disc in an order you specify.

NOTE

Program play function is possible only with audio CDs. It does not work

with DVD movie discs.

1 Press PROGRAM during playback or stop mode. The program

playback screen appears on the TV screen.

• To exit the screen, press PLAY, PROGRAM.

2 Press and press the numeric button(s), to select the

desired track number.

• Repeat step 2 to select another track.

• Up to 20 tracks can be programmed.

3 Press PLAY or ENTER to exit the screen. The selected track is

stored in the memory and play now begins in the programmed

sequence. If you press PROGRAM to exit the screen, the selected

tracks are not memorized.

After playback of all programmed tracks

Play is stopped.

CLEARING THE PROGRAM

•To clear the program one by one Press to select the

unwanted number and then press CLEAR.

• To clear all the programs Press to select the “Clear All”

and press ENTER. Press PLAY or ENTER to exit the screen. If you press

PROGRAM to exit the screen, the programs are not cleared (The

programs are also cleared when the power is turned off or the disc is

removed).

1

3

Clear

2,3

Step

Total Time

1

00:00

Program

Clear All

Step

Total Time

3

08:32

5119

Program

Clear All

GB

30

COMMON PROCEDURES OF INITIAL SETTINGS

Initial Settings

Once the initial settings have been completed, the player can always be

operated under the same conditions (especially with DVD discs). The

settings will be retained in the memory until they are changed, even if

the power is switched off.

COMMON PROCEDURES OF INITIAL SETTINGS

1 Press SETUP in the stop or playback mode. The SETUP menu is

displayed.

2 Press to select the desired item. The screen will show the

current setting for the selected item, and the alternate setting(s).

• Disc Audio (see page 31)

• Disc Subtitle (see page 31)

• Disc Menu (see page 31)

• Rating (see page 32)

• Password (see page 33)

• TV Aspect (see page 34)

• Menu Language (see page 35)

• TV Output (see page 35)

• Pseudo Pal (see page 36)

• Digital Audio Output (see page 37)

3 Press and then to select the desired setting and

press ENTER. Some items require additional steps (See the respective

page).

When the alternate setting is selected the screen returns to the Initial

Settings display.

To exit SETUP menu Press SETUP, RETURN or PLAY.

1

2,3

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio Original

Spanish

English

Chinese

Polish

Hungarian

Russian

French

German

Italian

Other – – – –

GB

31

SELECTING DISC LANGUAGES

Initial Settings

This is to select the audio soundtrack language, subtitle language and

the language used in title menus or DVD menus which will always be

used for every disc to be played back.

When you play back a DVD video disc, the DVD player automatically

displays the pre-selected subtitle language if it is included on the disc.

1 At the setup screen, press to select “Disc Audio” and

press

2 Press to select the desired language and then press

ENTER.

• Original The original language of each disc will be selected.

•English The English will be Selected.

• Other Another language can be selected. You can input 4-digit

language code (Refer to the language codes on page 38. Press

CLEAR if an incorrect language code is entered).

The “Disc Subtitle” and “Disc Menu” are selected by the same method.

NOTE

• If the language selected is not available on the disc, the original

language designated by each disc will be selected.

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio Original

Spanish

English

Chinese

Polish

Hungarian

Russian

French

German

Italian

Other – – – –

1,2

This is to prohibit the playing of specified DVDs which are unsuitable for

children. Some DVD discs contain a restriction level which enables

parents to remove scenes or prevent playback of discs by children. DVD

players are equipped with a password designed to prevent children

changing the level.

SELECTING RATING LEVEL (DVD ONLY)

1 At the SETUP screen, press to select “Rating” and

press

2 Press to select the desired level and press ENTER.

You cannot play DVD video discs rated higher than the level you selected

unless you cancel the parental lock function.

For example, when you select level 7, discs rated higher than level 7 are

blocked and cannot be played.

The parent lock level is equivalent to the following USA movie ratings.

Level 7: NC-17

Level 6: R

Level 4: PG 13

Level 3: PG

Level 1: G

• Some titles do not match with the rating level described as above.

If you change the level and enter a password, playback of all DVDs with

ratings higher than your selection will be blocked, unless the correct

password is entered again. For example: if you change the level to “5”,

the DVD player will not play discs with ratings of “6”, “7” or “8” unless

the correct password is entered on the remote control.

GB

32

SELECTING RATING LEVEL AND PASSWORD

Initial Settings

1,2

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio 8

7

6

5

4

3

2

1

Unlock

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio 8 Blocked

7 Blocked

6

5

4

3

2

1

Unlock

GB

33

SELECTING RATING LEVEL AND PASSWORD

Initial Settings

SETTING YOUR PASSWORD (DVD ONLY)

If you change the rating level to “7” or lower, you must enter a 4-digit

“password” to prevent playback of discs with higher ratings.

1 At the SETUP screen, press to select “Password” and

press

2 Input a 4-digit password and press ENTER.

Example: 1234

DO NOT FORGET YOUR PASSWORD

3 Input the 4-digit password again and press ENTER to verify.

Setting is finished.

• The rating is locked. Any discs whose rating is higher than the

setting cannot be played back unless the correct password is

entered.

TO CHANGE/CLEAR MEMORIZED PASSWORD

1 At the SETUP screen, press to select “Password” and

press

2 Input your password and Press ENTER.

3 To change or clear your password, press to select the

“Change” or “Clear” and press ENTER.

TO CLEAR YOUR 4-DIGIT PASSWORD

If you forget your password, to clear the current password, follow the

procedure below.

At the SETUP screen

1 Press to select “Password” item.

2 Enter 6-digit number “210499” and then press ENTER. The 4-digit

password is cleared.

3 Enter a new password. Refer to “Setting your password” section

above.

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio NEW

– – – –

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio Change

Clear

2,3

1,2,3

GB

34

SELECTING TV ASPECT

Initial Settings

Select the appropriate screen type according to your TV set; conventional

size screen (4:3) or wide-screen (16:9).

1 At the SETUP screen, press to select “TV Aspect” and

press

2 Press to select the desired Aspect and press ENTER.

4:3 Letterbox : The video material not formatted in the Pan & Scan style

is played back in the letterbox style (black bands appear at top and

bottom of screen).

4:3 Panscan : Select when a conventional TV set is connected. The video

material formatted in the Pan & Scan style is played back in that style (the

left and right edges are cut off).

16:9 Wide : Select when a wide-screen TV set is connected. Played in

“FULL” size (Setting the wide-screen TV to “FULL” mode is also

necessary).

• Each screen shows an example when the video material for a wide-

screen is played (This setting does not affect the video material for

conventional size).

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio 4:3 Letterbox

4:3 Panscan

16:9 Wide

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio 4:3 Letterbox

4:3 Panscan

16:9 Wide

1,2

16:9 Wide

4:3 Panscan

Cut Off

4:3 Letterbox

GB

35

SELECTING MENU LANGUAGE

Initial Settings

Selects language for DVD menus and displays on the TV.

1 At the SETUP screen, press to select “Menu Language”

and press

2 Press to select the desired Language and press ENTER.

It can be used to select the video output between S-VIDEO OUT and

COMPONENT VIDEO OUT.

1 At the SETUP screen, press to select “TV Output Select”

and press

2 Press to select the desired TV Output and press ENTER.

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio English

Spanish

French

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio English

Spanish

French

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio S-Video

Component

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio S-Video

Component

SELECTING TV OUTPUT

1,2

1,2

GB

36

SELECTING THE PSEUDO PAL (EUR ONLY)

Initial Settings

Depending on the DISC, you can play an NTSC-DVD DISC, in PSEUDO

PAL MODE.

1 At the SETUP screen, press to select “Pseudo PAL” and

press

2 Press to select the desired output and press ENTER.

NOTES

• The Pseudo PAL can be displayed when the TV system setting is set

to PAL mode and NTSC disc is inserted in this unit.

• If there are some problems during playing back a NTSC disc, select

the “Pseudo PAL” to “On” mode.

• The picture can be streamed according to TV type when the “Pseudo

PAL” is set to “On” mode.

SETTING THE TV SYSTEM

You can enjoy NTSC or PAL discs by changing the TV SYSTEM SETTING

to choose the appropriate system.

• If you try to play back PAL disc with NTSC-TV, The player will not

playback the disc.

• When the selected TV SYSTEM SETTING does not coincide with the

system of your TV, normal color picture may not be displayed.

• When you playback NTSC disc with PAL-TV, some discs may produce

black bands at the top and bottom of the screen.

TV SYSTEM SETTING Connected TV Available disc

PAL PAL NTSC/PAL DVD disc

NTSC NTSC NTSC DVD disc

AUTO MULTI system TV NTSC/PAL DVD disc

• To enter the TV SYSTEM SETTING mode, in STANDBY mode, press and

hold the PAUSE/STEP button on the front panel for 3 seconds. In the

TV system setting mode, the display window displays the current

setting. Press the PAUSE/STEP button to change the setting. To change

the settings, press the POWER button to confirm the desired setting.

1,2

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio On

Off

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio On

Off

GB

37

SELECTING DIGITAL AUDIO OUT

Initial Settings

Each DVD disc has a variety of audio output options. Set the player’s

Digital Audio Output according to the type of audio system you use.

1 At the SETUP screen, press to select Digital Audio Output

and press

2 Press to select the desired output and press ENTER.

DOLBY DIGITAL/PCM

Select “DOLBY DIGITAL/PCM”if an active digital output is supplied to the

Dolby Digital decoder, (or an amplifier or other equipment with a Dolby

Digital decoder).

STREAM/PCM

Select “Stream/PCM” if an active digital output is supplied to an

amplifier or other equipment with DTS decoder, Dolby Digital decoder

and MPEG decoder.

PCM

Select “PCM” if an active digital output is supplied to an amplifier or

other equipment with linear PCM only (or MD recorder or DAT deck).

NOTES

• When you are not using the player’s digital audio output, don’t select

any of the options.

• If an active digital audio output signal is supplied to an receiver or

other equipment without a corresponding digital decoding capability,

a very loud noise may be produced which could permanently

damage the speakers.

• The DTS DVD disc sound is played back only when the DVD player is

connected to a receiver with a DTS decoder.

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio DOLBY

DIGITAL /PCM

Stream/PCM

PCM

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

TV Output Select

Pseudo PAL

Digital Audio Output

Disc Audio DOLBY

DIGITAL /PCM

Stream/PCM

PCM

1,2

96 kHz Linear

PCM DVD

PCM PCM PCM

DTS DVD DTS Bit Stream No Output Audio Output

Dolby Digital DVD Dolby Digital Bit

Stream

Dolby Digital Bit

Stream

PCM

MPEG DVD MPEG Bit Stream PCM PCM

Audio CD PCM PCM PCM

DTS Audio CD DTS Bit Stream DTS Bit Stream DTS Bit Stream

Playback Disc OUTPUT

Stream / PCM Dolby Digital /

PCM

PCM only

GB

38

TABLE OF LANGUAGES AND THEIR ABBREVIATIONS

Initial Settings

Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and/or “Menu” (See page 31)

Code Language Code Language Code Language Code Language

6565 Afar 7079 Faroese 7678 Lingala 8375 Slovak

6566 Abkhazian 7082 French 7679 Laothian 8376 Slovenian

6570 Afrikaans 7089 Frisian 7684 Lithuanian 8377 Samoan

6577 Ameharic 7165 Irish 7686 Latvian, Lettish 8378 Shona

6582 Arabic 7168 Scots Gaelic 7771 Malagasy 8379 Somali

6583 Assamese 7176 Galician 7773 Maori 8381 Albanian

6588 Aymara 7178 Guarani 7775 Macedonian 8382 Serbian

6590 Azerbaijani 7185 Gujarati 7776 Malayalam 8385 Sundanese

6665 Bashkir 7265 Hausa 7778 Mongolian 8386 Swedish

6669 Byelorussian 7273 Hindi 7779 Moldavian 8387 Swahili

6671 Bulgarian 7282 Croatian 7782 Marathi 8465 Tamil

6672 Bihari 7285 Hungarian 7783 Malay 8469 Telugu

6678 Bengali; Bangla 7289 Armenian 7784 Maltese 8471 Tajik

6679 Tibetan 7365 Interlingua 7789 Burmese 8472 Thai

6682 Breton 7378 Indonesian 7865 Nauru 8473 Tigrinya

6765 Catalan 7383 Icelandic 7869 Nepali 8475 Turkmen

6779 Corsican 7384 Italian 7876 Dutch 8476 Tagalog

6783 Czech 7387 Hebrew 7879 Norwegian 8479 Tonga

6789 Welsh 7465 Japanese 7982 Oriya 8482 Turkish

6865 Danish 7473 Yiddish 8065 Panjabi 8484 Tatar

6869 German 7487 Javanese 8076 Polish 8487 Twi

6890 Bhutani 7565 Georgian 8083 Pashto, Pushto 8575 Ukrainian

6976 Greek 7575 Kazakh 8084 Portuguese 8582 Urdu

6978 English 7576 Greenlandic 8185 Quechua 8590 Uzbek

6979 Esperanto 7577 Cambodian 8277 Rhaeto-Romance 8673 Vietnamese

6983 Spanish 7578 Kannada 8279 Rumanian 8679 Volapük

6984 Estonian 7579 Korean 8285 Russian 8779 Wolof

6985 Basque 7583 Kashmiri 8365 Sanskrit 8872 Xhosa

7065 Persian 7585 Kurdish 8368 Sindhi 8979 Yoruba

7073 Finnish 7589 Kirghiz 8372 Serbo-Croatian 9072 Chinese

7074 Fiji 7665 Latin 8373 Singhalese 9085 Zulu

GB

39

DISC REQUIREMENTS / COPYRIGHT INFORMATION

Reference

PLAYABLE DISCS

This DVD player can play back the following discs.

Maximum playback time

Approx. 4 hours (single sided disc)

Approx. 8 hours (double sided disc)

Approx. 80 minutes (single sided disc)

Approx. 160 minutes (double sided disc)

74 minutes

20 minutes

74 minutes

20 minutes

DVD video discs

Disc Mark Contents

Audio+ Video

(moving pictures)

Disc size

12 cm

8 cm

Audio CDs Audio

Video CDs

(EUROPEAN

version only)

Audio+ Video

(moving pictures)

12 cm

12 cm

8 cm

8 cm

You cannot playback discs other than those listed above (CD-ROM, CD-G, photo CD, and CD-i discs can not be played on this DVD player).

“Certain audio features of this product are manufactured under license from Desper Products, Inc.,

Spatializer®3-D Stereo, Spatializer N-2-2™ and the circle-in-square device are trademarks owned by Desper Products, Inc,.”

REGION MANAGEMENT INFORMATION

This DVD Player is designed and manufactured to respond to the Region

Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number

of this DVD player, this DVD player cannot play that disc.

The Region number of this DVD player is . EUROPE USA / CANADA

NOTES ON UNAUTHORIZED DISCS

You may not be able to play back some DVD video discs on this player if they were purchased from outside your geographic area or made for business

purposes.

When you try to play back an unauthorized disc, “Check Regional Code” appears on the TV screen.

NOTES ON COPYRIGHT

It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material without permission.

DVD video discs are copy protected, and any recordings made from these discs will be distorted.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision

Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

1

GB

40

BEFORE CALLING SERVICE PERSONNEL

Reference

SYMPTOMS AND CORRECTION

Check the following guide for the possible cause of a problem before contacting service.

SYMPTOM CAUSE CORRECTION

No power • The power cord is disconnected • Plug the power cord into the wall outlet

securely.

The power is on, but the DVD player does

not work.

• No disc is inserted. • Insert a disc (Check that the DVD or, audio

CD indicator in the DVD display is lit).

No picture • The TV is not set to receive DVD signal

output. • Select the appropriate video input mode

on the TV so that the picture from the

DVD player appears on the TV screen.

• The video cable is not connected securely. • Connect the video cable into the jacks

securely.

• The connected TV power is turned off. • Turn on the TV.

No sound • The equipment connected with the audio

cable is not set to receive DVD signal

output.

• Select the correct input mode of the audio

receiver so you can listen to the sound

from the DVD player.

• The audio cables are not connected

securely. • Connect the audio cable into the jacks

securely.

• The power of the equipment connected

with the audio cable is turned off. • Turn on the equipment connected with the

audio cable.

• The Digital Audio Output is set to the

wrong position. • Set the Digital Audio Output to the correct

position, then turn on the DVD player

again by pressing the POWER button.

The playback picture is poor • The disc is dirty. • Clean the disc.

The DVD player does not start playback • No disc is inserted. • Insert a disc (Check that the DVD, or audio

CD indicator in the DVD display is lit).

• An unplayable disc is inserted. • Insert a playable disc (Check the disc type,

color system and Regional code).

• The disc is placed upside down. • Place the disc with the playback side

down.

• The disc is not placed within the guide. • Place the disc on the disc tray correctly

inside the guide.

• The disc is dirty. • Clean the disc.

• A menu is on the TV screen. • Press the SETUP button to turn off the

menu screen.

• The Rating level is set. • Cancel the Rating function or change the

rating level.

The remote control does not work

properly.

• The remote control is not pointed at the

remote sensor of the DVD player. • Point the remote control at the remote

sensor of the DVD player.

• The remote control is too far from the

DVD player. • Operate the remote control within about

23 ft (7 m).

• There is an obstacle in the path of the

remote control and the DVD player. • Remove the obstacle.

• The batteries in the remote control are

exhausted. • Replace the batteries with new ones.

GB

41

SPECIFICATIONS

Reference

DVD PLAYER

Power supply AC 230V / 50 Hz (EUROPE), AC 110V/60Hz (USA / CANADA)

Power consumption 15 W

Mass 3.3 kg

External dimensions (W X H X D) 285 x 103x 291 mm

Signal system PAL (EUR) , NTSC (USA / CANADA)

Laser Semiconductor laser, wavelength 650 nm

Frequency range (audio) 4 Hz to 20 kHz

Signal-to-noise ratio (audio) More than 100 dB (EIAJ)

Dynamic range (audio) More than 95 dB (EIAJ)

Harmonic distortion (audio) 0.008 %

Wow and flutter Below measurable level (less than + 0.001 % (W.PEAK) (EIAJ)

Operating conditions Temperature: 41°F to 95°F, Operation status: Horizontal

OUTPUTS

Video output 1.0 V (p-p), 75Ω, negative sync., RCA jack x 1

S-video output (Y) 1.0 V (p-p), 75Ω, negative sync., Mini DIN 4-pin x 1

(C) 0.286 V (p-p), 75Ω

SCART video output CVBS 1.0 V (p-p), 75Ω, negative sync., RCA jack x 1

(RGB) 0.63 V (p-p), 75Ω

Audio output (digital audio) 0.5 V (p-p), 75Ω, RCA jack x 1

Audio output (optical audio) Optical connector x 1

Audio output (analog audio) 2.0 Vrms(1 KHz, 0 dB), 330 , RCA jack (L, R) x 1

SUPPLIED ACCESSORIES

Video cable 1

Audio cable 1

NOTE

• Designs and specifications are subject to change without notice.

All rights reserved. No part of this publication may by reproduced, stored or transmitted in any

from without the written permission of NAD Electronics International

WWW.NADELECTRONICS.COM

©2001 NAD ELECTRONICS INTERNATIONAL

All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International

L55 Manual 02/01 Printed in Korea