Nanjing Hanlong Technology UC926ESERIAL IP PHONE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3466890
Application ID	sPiOTFSlAPBuSTykrFqF5g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.08kB (213526 bits)
Date Submitted	2017-07-17 00:00:00
Date Available	2017-07-17 00:00:00
Creation Date	2017-06-01 09:45:33
Producing Software	Microsoft® Word 2013
Document Lastmod	2017-06-01 09:45:33
Document Title	User Manual
Document Creator	Microsoft® Word 2013
Document Author:	Administrator

Blue Tooth
The Model UC926E connects to a wide range of Bluetooth Headset, compatible with Bluetooth
specification V4.0 and backwards compatible with 1.1, 1.2, 2.0 and 3.0.
How to Enable headset mode?
1) Find Menu then navigate as follows：Menu->Settings->Basic Setting->Headset:
2) Enable the Headset priority
3) Choose the “User HeadSet” or “Both” from “ringer Device for headset” option
4) Press the save button to save the configuration。
5) Press the headset key on phone’s during the idle status when you accomplish the abovementioned configuration. Headset icon will display on phone status bar
How to activate Bluetooth via phone interface？
Troubleshooting
Why can’t the phone detect the Bluetooth headset?
1) Ensure the Bluetooth headset is turned on.
2) Ensure the Bluetooth headset is in pairing mode, when the phone is searching for Bluetooth
headsets.
Why there is a noise?
1) Check the battery level. If the battery level is low, charge the Bluetooth headset.
2) Ensure the Bluetooth headset and the phone are within the working range of 10 meters
(32 feet) and there is no obvious interference (walls, doors, etc.) between them.
WIFI
1) Find Menu then navigate as follows:
Menu Settings Basic Setting Bluetooth
2) Press the save button to save the configuration.
3) You will see the Bluetooth icon on phone’s homepage status bar during the idle status.
(This icon means that phone has no pair the Bluetooth device.)
Enabling WiFi feature via phone interface:
1) Find Menu then navigate as follows
Menu Settings Basic Setting WiFi
2) Press the Switch button to turn on WiFi feature.
How to activate Bluetooth feature via web interface?
3) Press the Save button to save the configuration.
1) Login the phone’s webpage Setting Feature Bluetooth
Connect to an available wireless network via phone interface:
How to open the Bluetooth pairing mode on Bluetooth headset?
1) Find Menu then navigate as follows
1) Turn on the Bluetooth headset.
2) Long press the multifunction key on the Bluetooth headset until the indicator LED alternately
flashes red and blue.
The Bluetooth headset is in pairing mode.
How to scan the Bluetooth headset device on phone interface？
1) Press the Scan button on phone interface.
2) The phone will enter the scan interface.
The phone starts searching for Bluetooth headsets within the working range of 32 feet.
3) There will displays all detected Bluetooth headsets on the phone.
4) Choose the desired Bluetooth Device from the list and connect to it.
5) If the Bluetooth Device connected/paired successfully, you will see the “Connect Success!”
and connected successfully icon.
6) When you back to idle interface, you will see the connected successfully icon.
Note: If the Bluetooth headset has a PIN, you need to configure the PIN via web
interface: Default PIN is 0000.
1) Login the phone’s webpage->Setting->Feature->Bluetooth
How to edit device information on phone interface?
1) Find Menu then navigate as follows:
MenuSettingsBasic SettingBluetooth: Edit Device Information
Menu Settings Basic Setting WiFi: Available Network(s)
2) Press the Enter button, you will see many available wireless networks.
3) You can press the “scan” button to scan the wireless network.
4) You can press the “Detail” button to view a wireless network’s detail information.
5) Choose desired wireless network and then press the “Connect” button.
6) You must enter the wireless network’s password.
7) If the wireless network’s password is correct, the wireless network will connect successfully.
Add a Wireless Network Manually via phone interface?
1) Find Menu then navigate as follows
Menu Settings Basic Setting WiFi: The Storage Network.
2) Press the “Add” button to add a wireless network.
Select a Security Mode.
Enter the desired wireless network (SSID).
If the wireless network is secure, please enter its password in the password field.
3) Press the “Save” button to save the configuration.
You can choose this wireless network to connect it.
How to view Wireless Network status?
1) You will see the wireless network connected successfully icon when phone connects
wireless network successfully and back to idle interface.
2) Press the enter button, you can edit the Device Name.
Note: Contact your network administrator for the WiFi password.
How to adjust the earphone volume during a call?
How to Disable WiFi feature?
With the Bluetooth headset paired, you can do the following:
To disable the WiFi feature via phone interface:
Press the Volume key (+) on the Bluetooth headset to increase the volume.
1) Find Menu then navigate as follows:
Press the Volume key (-) on the Bluetooth headset to decrease the volume.
How to Ending Calls?
With the Bluetooth headset paired, press the multifunction key on the Bluetooth headset to
end a call.
Menu Settings Basic Setting WiFi
2) Press the Switch button to turn off WiFi feature.
3) Press the Save button to save the configuration.
Troubleshooting
IP Phone
Why can’t the IP phone connect to WiFi?
1) If the network is secure, ensure the entered password is right.
2) Ensure your gateway/router enables the wireless network feature.
3) Reboot your gateway/router.
4) Turn off the WiFi feature on the IP phone and then turn it on again.
Why is the wireless signal strength low?
1) Ensure the IP phone and your gateway/router are within the working range and there is no
obvious interference (walls, doors, etc) between them.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
User Guide For UC926E
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
--- Blue Tooth & WiFi
Tel: 0086-25-84658050 | Fax: 0086-25-84658319
Mail: support@htek.com | Web: www.htek.com
Add: 5th Floor, 1st Building Huashen Tech Park10 Huashen Temple Yuhuatai Dis Nanjing 210012 China
Copyright: © Nanjing Hanlong Technology Co., Ltd. 2005-2017 All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : Administrator
Creator                         : Microsoft® Word 2013
Create Date                     : 2017:06:01 09:45:33+08:00
Modify Date                     : 2017:06:01 09:45:33+08:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools