National Semiconductor Sweden LSE019 Proprietary wireless printer module User Manual

National Semiconductor Sweden AB Proprietary wireless printer module

User manual

Users Manual / Printer Adapter 1 (10)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.Mikael Ohlsson 19817/LSE019Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File2000-08-17 PA1 141494USER’S MANUALLSE 019 Printer Adapter BluetoothDisclaimer:This manual is published by Wireless Solutions Sweden AB, without any warranty.Improvements and changes to this manual necessitated by typhographical errors, inaccuraciesof current information, or improvements to equipment, may be made by Wireless solutionsSweden AB at any time and without notice. Such changes will however be incorporated intonew editions of this manual.Copyright  2000 Wireless Solutions Sweden AB
Users Manual / Printer Adapter 2 (10)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.Mikael Ohlsson 19817/LSE019Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File2000-08-17 PA1 141494 TABLE OF CONTENTS1 ABBREVIATIONS .............................................................................................................................. 22 DESCRIPTION.................................................................................................................................... 32.1 INTRODUCTION ...................................................................................................................................................................32.2 PRODUCT DESCRIPTION .......................................................................................................................................................33 BLUETOOTH STANDARD INFORMATION ...................................................................................... 33.1 BLUETOOTH CAPABILITY STATEMENT .................................................................................................................................34 INSTALLATION AND CONNECTION PROCESS FOR THE PRINTER ADAPTER............................. 44.1 INSTRUCTIONS FOR INSTALLING THE PRINTER ADAPTER FROM ANYCOM.............................................................................45 TROUBLE SHOOTING ....................................................................................................................... 56 TECHNICAL SPECIFICATION ........................................................................................................... 57 REGULATIONS.................................................................................................................................. 67.1 EUROPEAN COMPLIANCE ....................................................................................................................................................67.2 FCC (US) COMPLIANCE .....................................................................................................................................................77.3 EXPOSURE TO RADIO FREQUENCY RADIATION....................................................................................................................87.4 IMPORTANT SAFETY INFORMATION .....................................................................................................................................87.4.1 SAFETY WARNINGS ! ...........................................................................................................................................87.4.2 Operating Environment..............................................................................................................................................91 ABBREVIATIONSISM Industrial, Scientific and MedicalAC Alternate CurrentDC Direct CurrentLED Light Emmitting diodePWM Pulde Width ModulationPCM Pulse Code ModulationFCC Federal Communications CommissionETS European Telecommunication StandardUL Undewriters LaboratoriesCTR Common Technical RegulationsETL Edison Testing LaboratoryETSI European Telecommunications standards InstituteEEC European Economic CommunityEMC Electromagnetic CompatibiltyLVD Low voltage directiveSIG Special Intrest Group
Users Manual / Printer Adapter 3 (10)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.Mikael Ohlsson 19817/LSE019Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File2000-08-17 PA1 1414942 DESCRIPTION2.1 INTRODUCTIONThis users manual covers the LSE 019 Printer adapter for wireless printing applications. ThePrinter Adapter supports Wireless Printing when used in conjunction with the LSE 041Bluetooth Bluecard. The Printer Adapter provides a parallell interface to a printer. Themaximum distance for error free printing is up to 10 meters. A PC based printer installation isrequired.2.2 PRODUCT DESCRIPTIONThe LSE019 Printer Adapter adapter provides wireless printing for Bluetooth applications inthe 2.4 GHz ISM band. The Printer Adapter is intended for insert into a printer parallel port.LSE019 Features:• Data rates up to 460 Kbps.• Act as one device in a Bluetooth network.• Proprietary wireless printing supported.LSE019 Applications:• Wireless printing.3 BLUETOOTH STANDARD INFORMATION3.1 BLUETOOTH CAPABILITY STATEMENTThis product is manufactured to meet the Bluetooth specification 1.0A.The following profiles / interoperable products are supported:• Generic Access ProfileNote!The Wireless Printing Profile is an own profile and the the Printer Adapter works only inconjunction with the LSE 041 Bluetooth Bluecard. This profile must never be referred toin any way as beeing a Bluetooth standard profile.
Users Manual / Printer Adapter 4 (10)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.Mikael Ohlsson 19817/LSE019Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File2000-08-17 PA1 1414944 INSTALLATION AND CONNECTION PROCESS FOR THE PRINTER ADAPTER4.1 INSTRUCTIONS FOR INSTALLING THE PRINTER ADAPTER FROM ANYCOM1. Insert the Printer Adapter into the parallel port on your PC-based printer. (fig.1)2. Attach the Printer Adapter to the DC connector of the AC power transformer and pluggingthe AC connector into a live AC outlet.3. Power on the PC-based printer.After finishing the installation of your Bluecard Bluetooth SW from AnyCom (See. User’sManual LSE 041 / Bluecard ) on your PC, you should now be able to print via the BluetoothPrinter Application.Note!Use only the power supply provided with the LSE 019 Printer Adapter. Use of any other powersupply could damage the Printer Adapter. Connection to Printer Parallel port Connection to DC Connector of the AC power transformer fig. 1
Users Manual / Printer Adapter 5 (10)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.Mikael Ohlsson 19817/LSE019Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File2000-08-17 PA1 1414945 TROUBLE SHOOTINGThe Bluetooth splash screen appears but you get the error: -coldn’t find any bluetooth unitswithin range.→ The Bluetooth unit fails to discover other Bluetooth units or an unknown Bluetooth deviceanswers before the printer BT-device. Try reseting the Bluetooth Printer adapter bydisconnecting the power and removing it from the printer. Put it back on the printer andreconnect the power. Try moving the printer closer to the PC.Inquiry succeeds but connect fails.→ The Printer adapter needs a reset. Try reseting the Bluetooth Printer adapter bydisconnecting the power and removing it from the printer. Put it back on the printer andreconnect the power. Also, try moving the printer closer to the PC.6 TECHNICAL SPECIFICATIONRadio specificationsFrequency range 2.402 – 2.495 GHz, programmable for specific national regulations.Supportedspecification Bluetooth 1.0A.Output power 0 dBmPower management Active and passive power saving mode.Sensitivity - 74 dBmModulation and bit-rate Frequency hopping Spread Spectrum (FHSS) Gaussian Frequency Shift Keying (GFSK), 1Mbps.Antenna IntegratedElectrical characteristicsPower supply ExternalPower consumption 105 mA (peak)
Users Manual / Printer Adapter 6 (10)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.Mikael Ohlsson 19817/LSE019Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File2000-08-17 PA1 141494Physical interfaceIndicators Data traffic, Connect status.Mechanical specificationsDimensions 50x60x19 mm. Incl. connectorEnvironmentOperatingtemperature 0º C to +55º C.Storage temperature -20º C to +70º C.Humidity 5-95% non condensing.ComplianceRadio FCC part 15.247 (US),ETS 300 328 (Europe)EMC FCC part 15 C (US),ETS 300 826 (Europe)Safety UL 1950 (US),EN 60950 (Europe)Approval marks CE, ETL7 REGULATIONS7.1 EUROPEAN COMPLIANCEEMC, Electrical Safety and Radio EC Directive ComplianceThe CE mark is affixed to this product to confirm compliance with the following EuropeanCommunity Directives:
Users Manual / Printer Adapter 7 (10)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.Mikael Ohlsson 19817/LSE019Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File2000-08-17 PA1 141494• Council Directive 1999/5/EC of the European Parliament and the Council of 9 March 1999on radio equipment and telecommunications terminal equipment and the mutualrecognition of their conformity.• Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of MemberStates relating to electromagnetic compatibility (EMC).• Council Directive 73/23/EEC of 19 february 1973 on the harmonization of the laws ofMember States relating to electrical equipment designed for use within certain voltagelimits.Each of the above mentioned directives amended by• Council Directive 93/68/EEC of 22 July 1993 on the harmonization of the CE markingrequirements.A “Declaration of Conformity” in accordance with the relevant standards to confirm compliancewith the above mentioned directives has been made and is on file at Wireless SolutionsSweden AB, Sundbyberg, Sweden.7.2 FCC (US) COMPLIANCEFCC R.F. Interference StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) This device mustaccept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for class B Digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generatesand can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures.• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for help Any changes or modifications not expressly approved by Wireless Solutions Sweden AB could void the user’s authority to operate the equipment.
Users Manual / Printer Adapter 8 (10)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.Mikael Ohlsson 19817/LSE019Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File2000-08-17 PA1 1414947.3 EXPOSURE TO RADIO FREQUENCY RADIATIONThe radiated output power of the equipment is far below the FCC radio frequency exposurelimits. Neverthless, it is advised to use the equipment in such a manner that the potential forhuman contact during normal operation is minimized.7.4 IMPORTANT SAFETY INFORMATION7.4.1 SAFETY WARNINGS ! InterferenceAll wireless devices may get interference, which could affect performance. Switch off in aircraftWireless devices can cause interference. Using them on aircraft is illegal. Switch off when refuelingDo not use the wireless Printer Adapter at a refueling point. Do not use near fuel orchemicals.Switch off near blastingDo not use the Printer Adapter where blasting is in progress. Observe restrictions, and followany regulations or rules.Switch off near medical equipment.Follow all regulations and rules in hospitals. Do not use the Printer Adapter near medicalequipment.Use qualified serviceOnly qualified service personnel must repair equipment.Accessories Use only approved accessories. Do not connect incompatible products. Connecting to other devices When connecting to any other device, read its user’s guide for detailed safety instructions. Do not connect incompatible products. ChemicalsDo not store or use the Printer Adapter in places where it may be exposed to chemicals orchemical vapors. Doing so will lead to fires or electric chocks.
Users Manual / Printer Adapter 9 (10)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.Mikael Ohlsson 19817/LSE019Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File2000-08-17 PA1 141494Prohibited areasDo not use the Printer Adapter when the use of a Bluetooth application is prohibited or whenit may cause interference or danger.Humid or dusty placesDo not store or use the Printer Adapter in humid or dusty places. Doing so could lead to firesor electric chocks.Do not disassemble or modify the PC-card in any way Do not disassemble or modify the Printer Adapter in any way. Doing so without the expressapproval by the manufacturer will void user authority to operate the equipment and may leadto fires or electric shocks.Switch off near a microwave oven in useDo not use the Bluetooth application close to a microwave oven in use. There may be a riskthat the system will be disturbed.Heat, direct sunlightAvoid installing the Printer Adapter near sources of heat or in direct sunlight.Use only appropriate Region settingsUse only the region setting appropriate for the area where the Bluetooth application is used atthe present time. Using the LSE019 Printer Adapter in any other region or with an incorrectregion setting may be illegal.Connect only to SELV circuitsThe Printer Adapter is classified as an SELV (safety extra low voltage) circuit according tothe electrical safety standards EN 60950/IEC 950/UL 1950 (Safety of information technologyequipment). For this classification to be maintained, equipment to which the unit is connectedmust also be classified as an SELV circuit.7.4.2 Operating EnvironmentFollow always any special regulations in force in any area and always power off your Bluetoothdevice whenever it is forbidden to use it, or when it may cause interference or danger.When connecting the Printer Adapter to another device, read it’s users guide for detailedsafety instructions. Do not connect incompatible products.Electronic DevicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However,certain electronic equipment may not be shielded against the RF signals from your Bluetoothdevice.Hearing Aids
Users Manual / Printer Adapter 10 (10)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.Mikael Ohlsson 19817/LSE019Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File2000-08-17 PA1 141494Some digital wireless devices may interfere with some hearing aids.Medical DevicesPower off your Bluetooth device in health care facilities when any regulations posted in theseareas instruct you to do so. Hospitals or health care facilities may be using equipment thatcould be sensitive to external RF energy.Potentially explosive atmospheresDo not use your Bluetooth device when in any area with a potentially explosive atmosphereand obey all signs and instructions. Sparks in such areas could cause explosions.Users are reminded of the need to observe restrictions on the use of radio equipment in fueldepots, chemical plants or where blasting operations are in progress.Areas with a potentially explosive atmosphere are often but not always clearly marked. Theyinclude below deck on boats; chemical transfer or storage facilities; veichles using liquefiedpetroleum gas (such as propane or butane); areas where the air contains chemicals orparticles, such as grain, dust or metal powders; and any other area where you would normallybe advised to turn off your veichle engine.Failure to observe these instructions may lead to legal action.

Navigation menu