National Semiconductor Sweden LSE041R2 Bluetooth PC card for Host User Manual UsersManual LSE041 R2 regulation part

Download:
Mirror Download [FCC.gov]
Document ID	237319
Application ID	5Po9rqkbrdzY8fQTerwE4Q==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2kB (24942 bits)
Date Submitted	2002-04-17 00:00:00
Date Available	2002-04-17 00:00:00
Creation Date	2002-01-28 15:10:35
Producing Software	Acrobat PDFWriter 4.05 for Windows NT
Document Lastmod	0000-00-00 00:00:00
Document Title	UsersManual-LSE041_R2_regulation part.PDF
Document Creator	UsersManual-LSE041_R2_regulation part - Microsoft Word
Document Author:	cmiows

1 Regulations (LSE041R2 Bluetooth PC Card)
1.1 European Compliance
Limitation on Use of Wireless Technology (R&TTE 1999/5/EC)
The use of Bluetooth equipment is not allowed/limited in some countries, due to limitations on the use
of the frequency band 2400 – 2483.5 MHz. If radio frequency interference occurs, please stop using
this equipment immediately.
EMC, Electrical Safety and Radio EC Directive Compliance
The CE mark is affixed to this product to confirm compliance with the following European Community
Directives:
• Council Directive 1999/5/EC of the European Parliament and the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity.
• Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of Member States
relating to electromagnetic compatibility (EMC).
• Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member
States relating to electrical equipment designed for use within certain voltage limits.
Each of the above mentioned directives amended by
• Council Directive 93/68/EEC of 22 July 1993 on the harmonization of the CE marking requirements.
A “Declaration of Conformity” in accordance with the relevant standards to confirm compliance with
the above-mentioned directives has been made and is on file at National Semiconductor Sweden AB,
Sundbyberg, Sweden.
1.2 FCC (US) Compliance
FCC R.F. Interference Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for class B Digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures.
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV technician for help
Any changes or modifications not expressly approved by Wireless Solutions Sweden AB could void
the user’s authority to operate the equipment.
1.3 Exposure to Radio Frequency Radiation
The radiated output power of the equipment is far below the FCC radio frequency exposure limits.
Nevertheless, it is advised to use the equipment in such a manner that the potential for human
contact during normal operation is minimized.
1.4 Important Safety Information
1.4.1 Safety Warnings!
Interference
All wireless devices may get interference, which could affect performance.
Switch off in aircraft
Wireless devices can cause interference. Using them on aircraft is illegal.
Switch off when refueling
Do not use the wireless PC Card at a refueling point. Do not use near fuel or chemicals.
Switch off near blasting
Do not use the PC Card where blasting is in progress. Observe restrictions, and follow any
regulations or rules.
Switch off near medical equipment.
Follow all regulations and rules in hospitals. Do not use the PC Card near medical equipment.
Use qualified service
Only qualified service personnel must repair equipment.
Accessories
Use only approved accessories. Do not connect incompatible products.
Connecting to other devices
When connecting to any other device, read its user’s guide for detailed safety instructions. Do not
connect incompatible products.
Chemicals
Do not store or use the PC Card in places where it may be exposed to chemicals or chemical vapors.
Doing so will lead to fires or electric chocks.
Prohibited areas
Do not use the PC Card when the use of a Bluetooth application is prohibited or when it may cause
interference or danger
Humid or dusty places
Do not store or use the PC Card in humid or dusty places. Doing so could lead to fires or electric
chocks.
Do not disassemble or modify the Compact Flash in any way
Do not disassemble or modify the PC Card in any way. Doing so without the express approval by the
manufacturer will void user authority to operate the equipment and may lead to fires or electric
shocks.
Switch off near a microwave oven in use
Do not use the Bluetooth PC Card close to a microwave oven in use. There may be a risk that the
system will be disturbed.
Heat, direct sunlight
Avoid installing the PC Card near sources of heat or in direct sunlight.
Use only appropriate Region settings
Use only the region setting appropriate for the area where the Bluetooth application is used at the
present time. Using the PC Card in any other region or with an incorrect region setting may be illegal.
Connect only to SELV circuits
The PC Card is classified as an SELV (safety extra low voltage) circuit according to the electrical
safety standards EN 60950/IEC 950/UL 1950 (Safety of information technology equipment). For this
classification to be maintained, equipment to which the unit is connected must also be classified as
an SELV circuit.
1.4.2 Operating Environment
Always obey any special regulations in force in any area and always power off your Bluetooth PC
Card device whenever it is forbidden to use it, or when it may cause interference or danger.
When connecting the PC Card to another device, read it’s users guide for detailed safety instructions.
Do not connect incompatible products.
Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the RF signals from your Bluetooth device.
Hearing Aids
Some digital wireless devices may interfere with some hearing aids.
Medical Devices
Power off your Bluetooth device in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Potentially explosive atmospheres
Do not use your Bluetooth device when in any area with a potentially explosive atmosphere and obey
all signs and instructions. Sparks in such areas could cause explosions.
Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots,
chemical plants or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly marked. They include
below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas
(such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust
or metal powders; and any other area where you would normally be advised to turn off your vehicle
engine.
Failure to observe these instructions may lead to legal action.
2 Life Support Policy
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF
THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and whose failure
to perform, when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury to the
user.
2. A critical component of a life support device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 4
Creator                         : UsersManual-LSE041_R2_regulation part - Microsoft Word
Create Date                     : 2002:01:28 15:10:35
Title                           : UsersManual-LSE041_R2_regulation part.PDF
Author                          : cmiows
Producer                        : Acrobat PDFWriter 4.05 for Windows NT

EXIF Metadata provided by EXIF.tools