National Semiconductor Sweden LSE044 Bluetooth Adapter for Palm V Handhelds User Manual Regulation part LSE044

National Semiconductor Sweden AB Bluetooth Adapter for Palm V Handhelds Users Manual Regulation part LSE044

User manual regulation part

Users Manual LSE044 1 (4)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other)Nr - No.Mikael OhlssonDokansv/Godk - Doc respons/ApprovedKontr - CheckedDatum - DateRev File2001-08-101 REGULATIONS LSE044 PALM ADAPTER1.1 BLUETOOTH CAPABILITY STATEMENTThis product is manufactured to meet the Bluetooth specification 1.1.The following Bluetooth profiles are supported:•   Generic Access Profile•   Serial Port Profile•   Dial Up Networking Profile1.2 EUROPEAN COMPLIANCELimitation on Use of Wireless Technology (R&TTE 1999/5/EC)The use of Bluetooth equipment is not allowed/limited in some countries, dueto limitations on the use of the frequency band 2400 - 2483,5 MHz.If radio frequency interference occurs, please stop using this equipmentimmediately.EMC, Electrical Safety and Radio EC Directive ComplianceThe CE mark is affixed to this product to confirm compliance with the following EuropeanCommunity Directives:• Council Directive 1999/5/EC of the European Parliament and the Council of 9 March1999 on radio equipment and telecommunications terminal equipment and the mutualrecognition of their conformity.• Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of MemberStates relating to electromagnetic compatibility (EMC).•     Council Directive 73/23/EEC of 19 february 1973 on the harmonization of the laws ofMember States relating to electrical equipment designed for use within certain voltagelimits.Each of the above mentioned directives amended by•     Council Directive 93/68/EEC of 22 July 1993 on the harmonization of the CE markingrequirements.
Users Manual LSE044 2 (4)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other)Nr - No.Mikael OhlssonDokansv/Godk - Doc respons/ApprovedKontr - CheckedDatum - DateRev File2001-08-10A “Declaration of Conformity” in accordance with the relevant standards to confirmcompliance with the above mentioned directives has been made and is on file at WirelessSolutions Sweden AB, Sundbyberg, Sweden.1.3 FCC (US) COMPLIANCEFCC  R.F. Interference StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) This device mustaccept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for class B Digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures.•   Reorient or relocate the receiving antenna•   Increase the separation between the equipment and receiver•   Connect the equipment into an outlet on a circuit different from that to which the receiver    is connected•   Consult the dealer or an experienced radio/TV technician for help                  Any changes or modifications not expressly approved by Wireless Solutions Sweden AB                  could void the user’s authority to operate the equipment.1.4 EXPOSURE TO RADIO FREQUENCY RADIATIONThe radiated output power of the equipment is far below the FCC radio frequency exposurelimits.  Neverthless, it is advised to use the equipment in such a manner that the potential forhuman contact during normal operation is minimized.
Users Manual LSE044 3 (4)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other)Nr - No.Mikael OhlssonDokansv/Godk - Doc respons/ApprovedKontr - CheckedDatum - DateRev File2001-08-101.5 IMPORTANT SAFETY INFORMATION1.5.1 SAFETY WARNINGS !                    InterferenceAll wireless devices may get interference, which could affect performance.                    Switch off in aircraftWireless devices can cause interference. Using them on aircraft is illegal.                    Switch off when refuelingDo not use the wireless Palm Adapter at a refueling point. Do not use near fuel orchemicals.Switch off near blastingDo not use the Palm Adapter where blasting is in progress. Observe restrictions, and followany regulations or rules.Switch off near medical equipment.Follow all regulations and rules in hospitals. Do not use the Palm Adapter near medicalequipment.Use qualified serviceOnly qualified service personnel must repair equipment.Accessories                    Use only approved accessories. Do not connect incompatible products.                    Connecting to other devices                    When connecting to any other device, read its user’s guide for detailed safety instructions.                    Do not connect incompatible products.                   ChemicalsDo not store or use the Palm Adapter in places where it may be exposed to chemicals orchemical vapors. Doing so will lead to fires or electric chocks.Prohibited areasDo not use the Palm Adapter when the use of a Bluetooth application is prohibited or when itmay cause interference or danger.Humid or dusty placesDo not store or use the Palm Adapter in humid or dusty places. Doing so could lead to firesor electric chocks.Do not disassemble or modify the Palm Adapter in any way
Users Manual LSE044 4 (4)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other)Nr - No.Mikael OhlssonDokansv/Godk - Doc respons/ApprovedKontr - CheckedDatum - DateRev File2001-08-10Do not disassemble or modify the Compact Flash in any way. Doing so without the expressapproval by the manufacturer will void user authority to operate the equipment and may leadto fires or electric shocks.Switch off near a microwave oven in useDo not use the Bluetooth application close to a microwave oven in use. There may be a riskthat the system will be disturbed.Heat, direct sunlightAvoid installing the Palm Adapter near sources of heat or in direct sunlight.Use only appropriate Region settingsUse only the region setting appropriate for the area where the Bluetooth application is usedat the present time. Using the LSE044 Palm Adapter in any other region or with an incorrectregion setting may be illegal.Connect only to SELV circuitsThe Palm Adapter is classified as an SELV (safety extra low voltage) circuit according to theelectrical safety standards EN 60950/IEC 950/UL 1950 (Safety of information technologyequipment). For this classification to be maintained, equipment to which the unit  isconnected must also be classified as an SELV circuit.1.5.2 Operating EnvironmentFollow always any special regulations in force in any area and always power off yourBluetooth device whenever it is forbidden to use it, or when it may cause interference ordanger.When connecting the Palm Adapter to another device, read it’s users guide for detailedsafety instructions. Do not connect incompatible products.Electronic DevicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However,certain electronic equipment may not be shielded against the RF signals from your Bluetoothdevice.Hearing AidsSome digital wireless devices may interfere with some hearing aids.Medical DevicesPower off your Bluetooth device in health care facilities when any regulations posted in theseareas instruct you to do so. Hospitals or health care facilities may be using equipment thatcould be sensitive to external RF energy.Potentially explosive atmospheresDo not use your Bluetooth device when in any area with a potentially explosive atmosphereand obey all signs and instructions. Sparks in such areas could cause explosions.Users are reminded of the need to observe restrictions on the use of radio equipment in fueldepots, chemical plants or where blasting operations are in progress.
Users Manual LSE044 5 (4)Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other)Nr - No.Mikael OhlssonDokansv/Godk - Doc respons/ApprovedKontr - CheckedDatum - DateRev File2001-08-10Areas with a potentially explosive atmosphere are often but not always clearly marked. Theyinclude below deck on boats; chemical transfer or storage facilities; veichles using liquefiedpetroleum gas (such as propane or butane); areas where the air contains chemicals orparticles, such as grain, dust or metal powders; and any other area where you wouldnormally be advised to turn off your veichle engine.Failure to observe these instructions may lead to legal action.

Navigation menu