Navico GOFREEWIFI WIFI Router User Manual

Navico Auckland Limited WIFI Router

User manual

Specications / SpécicationsEnglish / FrançaisWIFI-1Install Guide / Guide d’installationwww.bandg.com | www.simrad-yachting.com | www.lowrance.comDimensions / Dimensions *988-10401-002*52 mm (2.05”)156 mm (6.14”)25 mm(1.0”)187 mm(7.36”)171 mm (6.76”)154 mm (6.06”)WIFI-1 featuresMarinised Construction IPX5Wireless standards 802.11 b/gNetwork Ports 2Automatic configuration Plug-n-playPower supply 12 V DC,  200 mALayout / Schéma2 24 5311Antenna / Antenne2Ethernet / Ethernet 3Power / Alimentation 4Ethernet LEDs / LEDs Ehernet -Green: port is active /  -Vert: port actif5Power LED / LED d’alimentation -Red: power on / -Rouge: sous tension1The antenna can’t be replaced by the user for it has been fixed with special glue, The maximum peak gain of this antenna is only 3dBi.
Establish Wi-Fi connection / Etablir la liaison Wi-FiDownload Apps from App Store / Télécharger l’application de l’App StoreReferences / Références 1 2Password available on sticker on Wifi-1 unit, and from MFD /  Mot de passe disponible sur l’étiquette de l’unité WIFI-1 ou à partir du MFDFor a list of supported features or to view the latest apps for your MFD please visit: / Pour une liste des fonctionnalités supportées, ou pour connaitre les dernières applications pour votre écran multifonction, visitez:www.bandg.com/gofreewww.simrad-yachting.com/gofreewww.lowrance.com/gofree ¼Note: Graphics from iPad and App Store are examples only. Tablets and smartphones from other vendors can be used for controlling the MFD when relevant Apps are available. / ¼Note: Les graphiques de l’iPad et App Store ne sont que des exemples. D’autres tablettes et smartphones peuvent être utilisés pour contrôler l’écran multifonction, dès lors que l’application correspondante est disponible.2^pρl∶0臼"tAddΓessProd"Ct"°Ce"Ⅲcate"o。:LCsˉ02041601Tia"he DistJC1Guamgzhou,Chi"au田reIess Iuousoz813,sⅢˉ7s6,s"os21,sⅢ ˉ060o,s"丬8sR,smˉgO1B,sⅢ ~q48,sⅢ IC warning statements:  - English Warning Statement:   “This device complies with Industry Canada licence-exempt    - French Warning Statement:  RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this devicemust accept any interference,including interference that may cause undesired operation of the device."  “Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage  This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.est susceptible d'en compromettre le fonctionnement."Trade"arkThe subn1itted products have been tested by us、 ″ith the I丨With the foⅡowing Europ∞n DirecⅡves∶The R&TTE D∶roCⅡve19ggrsrEC^ppⅡed suⅡdaFds Roport"o。^rt:c:e3.2:E】od:ˇe Uso of The Radi°speotrumETs【 10冫^"lCIe3.1bI:Ehctromag"et℃ Compat:bⅢtyETs:EN301489ˉ17Vn。1.1 (2oo9ˉ05)EVEREs丁 will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the   energy and, if not installed and used in accordance with the protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency   This equipment has been tested and found to comply with the    limits for a Class  B digital device, pursuant to part 15 of   the FCC Rules. These limits are designed to provide reasonable   FCC warning statements:instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferencefollowing measures:^rt℃ "d safotyE"5037刂 :2002EN sOOsOˉ 1:2006+A11:200θ+^1:2010Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver....Connect the equipment into an outlet on a circuit different from that to which  the receiver is connected.Consult the dealer or an experienced radio/TV technician for help..n nor了nal operation:ηode.The test resu丨sampIe tested and to the speciⅡcak,appⅡes specⅢcaⅡs臼mp丨e inves刂gated in ourtest referenCe number onIy.The CE madongs as shown beloⅥ `can be a仟:Xod on the product aier prepara刂technica|documentation。0theΓ relevant Directives have to be observed.CCaution: Any changes or modifications to this device not explicitly  approved by manufacturer could void your authority to operate this This device complies with part 15 of the FCC Rules. Operation is   subject to the following two conditions: (1) This device may not   cause harmful interference, and (2) this device must accept any   interference received, including interference that may cause .This equipment complies with FCC RF radiation exposure limits   set forth for an uncontrolled environment. This device and its antenna must not be located or  operating in conjunction with any "To comply with FCC RF exposure compliance requirements, this  grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a  separation distance of at least 20 cm from all persons and must not be equipment.undesired operationother antenna or transmitter.co-located or operating  in conjunction with any other antenna or transmitter."

Navigation menu