Navico LOWFMMOD1V1 FM Modulator User Manual FM Modulator Owners Manual1

Download:
Mirror Download [FCC.gov]
Document ID	581887
Application ID	HDUfy6h4fTiaIsoRwCjfqg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.89kB (73639 bits)
Date Submitted	2005-09-14 00:00:00
Date Available	2005-09-14 00:00:00
Creation Date	2005-09-14 17:07:25
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-09-14 17:07:25
Document Title	Microsoft Word - FM Modulator Owners Manual1.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	reports

FM Modulator Operation
This product has a built-in FM Modulator that enables you to play your pre-recorded
music through your FM radio. No additional wiring is needed. The frequency is fully
adjustable from 88.1 to 107.9 MHz in .2MHz steps.
To turn on the FM modulator press MENU, select FM Modulator.
Select _____ to turn the FM Modulator on.
Select _____ to turn the FM Modulator off.
To select the frequency to transmit on press MENU, select FM Modulator.
Select _____ to set the frequency higher.
Select _____ to set the frequency lower.
FCC Compliance Statement
This device complies with Part 15 rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits of a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential environment. This equipment generates, uses, and radiates radio frequency
energy, and if not installed and used in accordance with the instructions, may cause
harmful interference. However, there is no guarantee that interference will not occur. If
this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to correct the
interference by one of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician.
The product that contains this device will have a label on the exterior that reads
“Contains FCC ID:D6NLOWFMMOD1V1”.
Canadian Compliance Statement
This Class B Digital apparatus meets all the requirements of the Canadian InterferenceCausing Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material
broilleur du Canad
This device complies with Class B Limits of Industry Canada. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
The product that contains this device will have a label on the exterior that reads
“Contains IC:1542B-FMMOD1V1”.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2005:09:14 17:07:25-05:00
Modify Date                     : 2005:09:14 17:07:25-05:00
Page Count                      : 2
Creation Date                   : 2005:09:14 22:07:25Z
Mod Date                        : 2005:09:14 22:07:25Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : reports
Metadata Date                   : 2005:09:14 22:07:25Z
Creator                         : reports
Title                           : Microsoft Word - FM Modulator Owners Manual1.doc

EXIF Metadata provided by EXIF.tools