Navico VHFRS20 MARINE FIXED MOUNT DSC VHF RADIO User Manual
Navico Auckland Limited MARINE FIXED MOUNT DSC VHF RADIO
Navico >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3406999 |
| Application ID | mpy708O5gr5yxwiHxzQufg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 155.77kB (1947147 bits) |
| Date Submitted | 2017-05-29 00:00:00 |
| Date Available | 2017-07-13 00:00:00 |
| Creation Date | 2017-05-25 11:37:53 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2017-05-29 11:40:35 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2017 (Windows) |
Link-6 User Guide ENGLISH lowrance.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected in this version of the manual. Please contact your nearestdistributor if you require any further assistance. It is the owner’s sole responsibility to install and use the equipment in a manner that will not cause accidents, personal injury or property damage. The user of this product is solely responsible for observing safe boating practices. NAVICO HOLDING AS AND ITS SUBSIDIARIES, BRANCHES AND AFFILIATES DISCLAIM ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS, DAMAGE OR THAT MAY VIOLATE THE LAW. Governing Language: This statement, any instruction manuals, user guides and other information relating to the product (Documentation) may be translated to, or has been translated from, another language (Translation). In the event of any conflict between any Translation of the Documentation, the English language version of the Documentation will be the official version of the Documentation. This manual represents the product as at the time of printing. Navico Holding AS and its subsidiaries, branches and affiliates reserve the right to make changes to specifications without notice. Copyright Copyright © 2017 Navico Holding AS. Warranty The warranty card is supplied as a separate document. In case of any queries, refer to the brand website of your unit or system: www.lowrance.com RF Emissions notice 2| This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device’s antenna must be installed in accordance with provided instructions; and it must be operated with minimum 1.8 m spacing between the antennas and all person’s body (excluding extremities of hands, wrist and feet) | Link-6 operator manual during operation. Further, this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ¼¼ Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an output on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced technician for help. A shielded cable must be used when connecting a peripheral to the serial ports. Innovation, Science and Economic Development Canada Compliance This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 1.8m between the radiator & your body. ISEDC exposition aux radiations: Cet équipement est conforme avec ISEDC les limites d’exposition aux rayonnements définies pour un contrôlé environnement. Cet émetteur ne doit pas être co-localisés ou fonctionner en | Link-6 operator manual |3 conjonction avec une autre antenne ou émetteur. Cet équipement doit être installé et utilisé avec un minimum de 1.8 m de distance entre le radiateur et votre corps. CE Compliance Statement This product complies with CE under RED directive 2014/53/EU. The relevant Declaration of Conformity is available in the following website under model documentation section: http://www.lowrance.com Warning The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that of the receiver • Consult the dealer or an experienced technician for help 4| | Link-6 operator manual Countries of intended use in the EU AT - Austria HU - Hungary PL - Poland BE - Belgium IS - Iceland PT - Portugal BG - Bulgaria IE - Ireland RO - Romania CY - Cyprus IT - Italy SK - Slovak Republic CZ - Czech Republic LV - Latvia SI - Slovenia DK - Denmark LI - Liechtenstein ES - Spain EE - Estonia LT - Lithuania SE - Sweden FI - Finland LU - Luxembourg CH - Switzerland FR - France MT - Malta TR - Turkey DE - Germany NL - Netherlands UK - United Kingdom GR - Greece NO - Norway Trademarks Lowrance® and Navico® are registered trademarks of Navico. NMEA® and NMEA 2000® are registered trademarks of the National Marine Electronics Association. Navico recommends that you check the radio operating licensing requirements of your country before using this VHF radio. The operator is solely responsible for observing proper radio installation and usage practices. Notes on MMSI and DSC The user MMSI (Marine Mobile Service Identity) is a unique nine digit number. It is used on marine transceivers that are capable of using DSC (Digital Selective Calling). Digital Selective Calling offers significant safety and convenience advantages over older VHF radios without this functionality. ¼¼ Note: many countries do not have radio repeaters that support DSC message relaying. However DSC can still be useful for direct ship-toship communication, where the other vessel is also equiped with a DSC capable radio. You must obtain a user MMSI and enter it into your radio in order to use the DSC functions. Contact the appropriate authorities in your country to obtain an MMSI number - charges may apply. If you are unsure who to contact, consult your Lowrance dealer. | Link-6 operator manual |5 ¼¼ Note: DSC distress calls generated by this radio are limited to the same range restrictions that apply to regular VHF transmissions. The vessel sending a distress can only rely upon DSC if within range of a GMDSS Coast Radio Station. Typical VHF range may be about 20NM, though this varies greatly depending upon installation, antenna type, meteorological conditions, etc. About this manual This manual is a reference guide for installing and operating a Link-6 VHF radio. Important text that requires special attention from the reader is emphasized as follows: ¼¼ Note: Used to draw the reader’s attention to a comment or some important information. ! Warning: Used when it is necessary to warn personnel that they should proceed carefully to prevent risk of injury and/or damage to equipment/personnel. 6| | Link-6 operator manual Contents General Information 12 How to display and navigate menus Key functions 15 The radio menus 15 16 17 17 20 23 24 Scan menu Watch Display Radio setup DSC setup Alarms Reset 25 DSC call menu 25 27 28 DSC calls Track buddy Contacts 30 My channels 31 Shortcuts 32 Installation 32 33 33 37 Checklist Installation options Selecting a suitable mounting location First startup configuration 40 Specifications 43 Channel Charts 43 51 53 EU and INTERNATIONAL channel chart USA channel chart CANADA Channel Chart Contents | Link-6 operator manual |7 1 General Information • • • • • • • • • • • • • • • • • • • • • • 8| Your Link-6 provides the following useful features: Prominent channel display Adjustable contrast settings for the LCD Adjustable keypad backlighting for easy night-time use Waterproof and submersible to comply with IPx7 GPS latitude and longitude (LL) and time display (when connected to a GPS source) Choice of High (25 W) or Low (1 W) transmission power 4 key handset mic with built-in speaker Powerful 4 W external audio output Access to all currently-available marine VHF channel banks (USA, Canada, International) including weather channels where available (model dependant) Dedicated CH16/9 key for quick access to the priority (international distress) channel TRI key to select DUAL/TRI scan Dedicated Wx (Weather) key DSC (Digital Selective Calling) capability that meets Global DSC Class D Standards Separate CH70 receiver included built in DISTRESS call button to automatically transmit the MMSI and position until an acknowledgement is received Contacts list that stores up to 50 names with MMSI numbers MMSI storage for three favourite groups Group Call and All Ships Call facility LL position polling information Weather alert facility where available (US mode) ATIS facility for inland waterways (EU mode) With DSC Auto-Switch disable and DSC Test function General Information | Link-6 operator manual How to display and navigate menus The majority of the buttons, and both of the rotary knobs, can open menus with multiple options. The channel knob is used to scroll through the options. The currently selected option is indicated by a black highlight bar, and the text is inverted to white. Selection of a highlighted option is made by pressing the channel knob. If a list of options is too long for the page, a scroll bar is shown on the right side of the screen. The black rectangle on the scroll bar indicates the highlighted options relative position in the list. scroll bar indicates further options above and below displayed text Press the Exit button to step backwards to the previous menu page, or exit the menus completely. Entry of alphanumeric data Rotate the channel knob to scroll through the alphanumeric characters. Press channel knob, to select and step to the next character. To step backwards, press the MENU button. Press X to cancel entry and return to previous menu. LCD symbols and meanings When the Link-6 starts up it momentarily displays the brand, model, region, software version, and MMSI. General Information | Link-6 operator manual |9 During normal operation, the following icons may be displayed on the screen depending on setup: Symbol Meaning Transmitting Transmition power Weather channel stored by user (EU/INT only) Weather alert enabled Receiver Busy with incoming signal Missed DSC call Duplex channel selected (off when Simplex) Local mode enabled (used when in areas of high radio traffic, ie inner harbour) DSC functionality is enabled DSC functionality is enabled, auto switching is turned off EU models only - must be enabled when in European inland waterways Low Battery warning (activates at 10.5 V) Channel bank is set to USA Channel bank is set to International. (Channels available depends on country radio cloned for) Channel bank is set to Canada Weather channel bank active (USA/CAN) replaces channelbank icon temporarily Channel is saved in the MY CHANNELS list Track your Buddy feature is active TRI watch or DUAL scan is active GPS simulator is active 10 | General Information | Link-6 operator manual A typical display: 1. Channel is set to high power transmit 2. Missed call in the DSC call log 3. Channel is busy 4. Volume is under active control 5. Current channel saved in ‘My Channels’ 6. Track your buddy is enabled 7. Current channel will be skipped during a scan 8. Volume level indicator 9. Time (derived from GPS) - UTC offset is applied 10. Latitude/Longitude 11. Squelch level indicator 12. Channel number (2 or 4 digits) 13. The USA channel bank is active 14. DSC functionality is enabled, but autoswitch is off 15. Weather alert function is enabled General Information | Link-6 operator manual | 11 Key functions The following describes the direct functions of the keys/knobs. Where necessary, additional detail on any menus accessed by keys is covered in following chapters. 12 13 11 5 6 7 8 9 10 1. Channel knob / Press to Select Turn knob for channel selection, menu scrolling, alphanumeric entry, and fine adjustment of backlight level (dependent on active menu). Short press to make selections in menus. Long press to open MY CHANNELS. 2. VOL / SQL Volume and Squelch level. Short press knob to select which control to adjust. Which is currently selected is indicated by a small triangular arrow above the level bar for each option. Turning the knob clockwise increases setting, anti-clockwise decreases it. Long press to open SHORTCUTS. 3. EXIT Press EXIT when navigating menus, to clear incorrect entries, to exit from a menu without saving changes, and to back up to the previous screen. 4. DSC CALL / MENU SELECT Short press to enter the DSC Call Menu and make DSC calls. Long press to open the MENU SELECT page. 5. Power / Backlight Short Press to adjust backlight level sequentally. Repeated short press of the power button will step through large backlight adjustments. The Channel knob can be used to make finer adjustments. Long press to turn radio on or off. 6. Weather Channel Short press (US/CAN models): press to hear the most recently selected NOAA/Canadian weather station. For all other models, changes channel to user programmed choice. Long press (non US/CAN models only): to store current channel as the 12 | General Information | Link-6 operator manual weather channel. 7. SCAN Short press to enter ALL SCAN mode. ALL SCAN sequentially scans all channels for activity. When a signal is received, scanning stops at that channel and the BUSY icon appears on the screen. If the signal ceases for more than 5 seconds, the scan automatically resumes. Turn the channel knob to temporarily skip over (lock out) a busy channel and resume the scan. The direction turned determines if the scan goes up or down the channel numbers (ie ‘forward’ or ‘reverse’). If it is still busy when the scan completes a full cycle, it will stop again at this channel. Note that it is not possible to skip over the priority channel. Press ENT to permanently skip over the channel. The SKIP icon will show on the LCD for this channel. To cancel a skipped channel, select the channel while in normal mode (non-scan mode) then press the ENT key - the SKIP icon will disappear. Repowering the radio also restores all skipped channels. Press SCAN or EXIT while scanning is active to stop at the current channel and return to normal operation. Long press SCAN from normal operation to enter the SCAN menu. 8. TRI (WATCH) Short press to start DUAL WATCH or TRI WATCH (if ‘watch’ channel set) Long press to set the current channel as the watch channel. When a short press is made on the TRI key, the radio will either switch to DUAL or TRI watch mode depending on whether a watch channel has been setup. Without a watch channel the radio will go to DUAL WATCH, where the channels ‘watched’ are the current channel and the priority channel (the distress channel, CH16 for most countries). With a watch channel selected, TRI WATCH is enabled, where the channels ‘watched’ are the current channel the ‘watch’ channel, and the priority channel (the distress channel, CH16 for most countries). If the radio is set to ‘Country: USA’, two priority channels are watched Channel 9 and Channel 16. 9. 16 / 9 (radio and handset) Short press to change to priority channel. Press again to return to original channel. For US models: Long press to make Channel 09 the priority channel. The default Priority Channel is CH16. 10. DISTRESS Short press to start a distress call, where the nature of distress can be selected from a list. Long press the distress button to initiate an ‘undesignated’ distress call. This call is broadcast to all DSC equipped radios, so will create an alarm on every DSC radio within range. If position information is available it will be included in the transmition. General Information | Link-6 operator manual | 13 11. H/L (handset mic only) Transmission Power. Press to toggle between high (25 W) or low (1 W) transmission power for the entire channel bank. The HI or LO selection is shown on the LCD. Some channels allow only low power transmissions. Error beeps will sound if attempting to change the transmission power while on one of these channels. Some channels allow only low power transmissions initially, but can be overridden to high power by pressing (and holding) H/L after depressing PTT. Keep the H/L button pressed down after releasing the PTT button, if wanting to transmit again on high power. 12. + / - (handset mic only) Channel change. Short press (+) goes up one channel, or (-) goes down one channel. Holding either key will, after a short delay, step rapidly through the channels. 13. PTT (handset mic only) Push-to-talk button. Press button to transmit. Only depress for duration of message to be broadcast. Radio can’t receive while it is transmitting. 14 | General Information | Link-6 operator manual 2 The radio menus A long press of the MENU button opens MENU SELECT page. The following shows the menu structure (top and 2nd level only): SCAN ALL SCAN ALL CHANNELS + 16 MY CHANNELS MY CHANNELS + 16 EDIT MY CHANNELS (choose channels) WATCH DUAL WATCH TRI WATCH SET WATCH CHANNEL (choose channel) DISPLAY TIME DISPLAY POS DISPLAY COG/SOG BACKLIGHT CONTRAST (ON / OFF) (ON / OFF) (ON / OFF) (0-10) (0-10) RADIO SETUP SENSITIVITY UIC POWER OUTPUT CH NAME KEY BEEP UNITS INT SPEAKER EXT SPEAKER GPS TIME VESSEL CALLSIGN (DISTANT/LOCAL) (USA/INT’L/CANADA) (HIGH/LOW) (>) (0-10) (>) (ON/OFF) (ON/OFF) (>) (>) (>) DSC SETUP ALARMS DSC FUNCTION USER MMSI ATIS FUNCTION SEA/INLAND USE ATIS MMSI GROUP SETUP INDIVIDUAL ACKN. POS ACKNOWLEDGE AUTO SWITCH TEST ACKNOWLEDGE RX DISTR WHILE OFF TIMEOUT (X) (>) (ON/OFF) (SEA/INLAND) (>) (>) (AUTO/MANUAL) (>) (ON/OFF) (AUTO/MANUAL) (X) (>) GPS ALERT WX ALERT DSC ALARM (>) (>) (>) RESET (EU cloned radio only) (EU cloned radio only) (EU cloned radio only) (US cloned radio only) (YES/CANCEL) Key: (>) further menu options (X) toggle selection. ‘X’ means option enabled. Scan menu This menu is for choosing a scan mode to enable, as well as selection of the channels scanned per the MY CHANNELS list. ¼¼ Note: Scanning is not available if ATIS mode is turned on. All scan Scans all channels cyclically. All channels + 16 Scans all channels cyclically, but checks the priority channel after every channel step The radio menus | Link-6 operator manual | 15 My channels Scan all channels selected in EDIT MY CHANNELS My channels + 16 Scans all channels selected in EDIT MY CHANNELS, while also checking the priority channel after every channel step. Edit my channels Allows creation of a custom list of channels - used in a MY CHANNELS scan. Watch This menu is for choosing a watch mode to enable, as well as selection of the watch channel. Watch modes can be thought of as a channel scan on a subset of channels, where scanned channels are ‘listened’ to briefly every 3 seconds, to determine if there is any active radio communication. ¼¼ Note: Watch modes are not available if ATIS mode is turned on. Dual watch Select this to watch the current channel and the priority channel (Channel 16). TRI watch Select this to watch the current channel, the user selected ‘watch’ channel, and the priority channel (Channel 16). Set Watch Channel Allows a watch channel to be selected from all available channels. Selected channel is used by TRI WATCH mode. 16 | ¼¼ Note: If the radio is configured for USA market, two priority channels are watched: Channel 9 and Channel 16. The radio menus | Link-6 operator manual Display This menu allows the user to partially customize the screen information displayed, and adjust the screen for best visibility to suit the user and operating conditions. Time display Select to switch the display of Time to ON or OFF. If turned ON, the display of COG/SOG is turned off, due to screen space constraints. LOC (Local Time) is displayed below the time if a UTC (Coordinated Universal Time) offset has been entered; otherwise UTC is shown in it’s place if no offset has been applied. POS display Select to switch ON or OFF the display of position provided from connected GPS. COG/SOG Select to switch ON or OFF the display of COG/SOG provided from connected GPS. If turned ON, Time display is turned OFF, due to screen space constraints. Backlight Select to make adjustment to the backlight level using the Channel knob. Range is OFF, then 1 to 10. Contrast Select to make adjustment of the screens contrast, using the Channel knob. Range is 00 to 10. Radio setup The Radio setup menu covers settings that are typically configured at installation, and seldom need changing. Local/Dist Use LOCAL/DIST to improve the sensitivity of the receiver either locally (LOCAL) or over distances (DIST). LOCAL is not recommended for use in open sea conditions. It is designed for use in areas of high radio noise; for example, close to a The radio menus | Link-6 operator manual | 17 busy port or city. UIC Select between USA, International or Canadian channel banks. The selected channel bank is displayed on the LCD along with the last used channel. All the channel charts are shown in “Channel Charts” on page 43. ¼¼ Note: UIC may not be available on all models. Power output Select to toggle between high (25 W) or low (1 W) transmission power for the entire channel bank. The HI or LO selection is shown on the LCD. Low power transmission draws significantly less current (about 1/4) from the battery, so is recommended for short range communication, and where battery capacity is limited. ¼¼ Note: some channels can’t be switched to high power, and will show LO regardless of power output setting in menu. CH name CH NAME gives you the option to edit or delete the channel name descriptions displayed on the screen. Select to edit the existing description of the channel currently in use. It can be a maximum of 12 characters long. Key beep Select to allow adjustment of key beep volume. Volume can be set from 00 - 10 (where 00 is off, and 10 is loudest). Units Select SPEED to choose whether displayed in KNOTS, MPH, or KPH Select COURSE to toggle between displaying in MAGNETIC or TRUE. A true north heading is corrected for magnetic declination. A magnetic north heading source must also output magnetic variation data if the heading is to be displayed as a true north value. Int speaker Select to switch the radio’s internal speaker ON or OFF. Incoming voice calls and audible DSC alerts are prevented, but key beeps and alarms will still be audible. 18 | The radio menus | Link-6 operator manual Ext speaker Select to switch the radio’s external speaker ON or OFF. Incoming voice calls and DSC alerts are prevented, but key beeps and alarms will still be audible. GPS MANUAL Select MANUAL to enter a GPS position (and time) from another source when radio is not receiving position data from an external antenna, or no antenna is connected. The manually entered GPS position can be used in DSC calls. If POS Display is turned ON, the latitude and longitude are shown on the screen with a prefix ‘M’ indicating manual entry. ¼¼ Note: The manual entry is cleared if a real GPS position is received via the NMEA 0183 port. CHECKSUM Select to toggle on or off. When enabled, data will be ignored if checksum does not match (ie no tolerance to data corruption). GPS SIM Select to toggle ON or OFF. Whenever the GPS Simulator is turned ON, simulated Speed Over Ground (SOG), Course Over Ground (COG), and LL position appear on the screen. This is for the purpose of demonstration only. The SIM icon is displayed to warn the user it is in this mode. ¼¼ Note: It is not possible to send a DSC transmission when in Simulator mode. ¼¼ Note: The GPS Simulator is set to OFF whenever the radio has the power cycled, or real GPS data is available through the COM port. Time Time Offset Select TIME OFFSET to enter the difference between UTC and local time. 15 minute increments can be used with a maximum offset of ±13 hours. Does not automatically adjust for Daylight Savings Time. The radio menus | Link-6 operator manual | 19 Time Format Select to toggle between 12 and 24 hour format. Vessel call sign Select to enter vessel callsign. Not used by radio - purely for record keeping purposes. DSC setup DSC Function It’s recommended DSC functionality is always enabled, unless operating the vessel in an ATIS region. An MMSI number must be entered in radio before the DSC function can be enabled. User MMSI Enter an MMSI number to access the radio’s DSC functionality. This unique identifier must be supplied a local radio spectrum authority. DO NOT enter a random ‘made up’ number. ¼¼ Note: Contact a Lowrance dealer if you need to change your MMSI after initial input. ATIS function (EU ATIS radios only) ATIS must be enabled when navigating inland waterways in signatory countries of the RAINWAT agreement. It should NOT be used outside these regions. DSC functionality is not possible when ATIS is turned on. Sea/Inland mode (EU ATIS radios only) Toggles between DSC (Sea) and ATIS (Inland) modes. Does not allow both to be selected at the same time. ATIS ID (EU ATIS radios only) Enter an ATIS number to access the radio’s ATIS functionality. This unique identifier must be supplied a local radio spectrum authority. DO NOT enter a random ‘made up’ number. ¼¼ Note: Contact a Lowrance dealer if you need to change your ATIS ID after initial input. 20 | The radio menus | Link-6 operator manual Individual acknowledge (“INDIVIDUAL ACK”) The radio can be configured to automatically acknowledge an incoming call, or require manual intervention: AUTO Sends an automatic acknowledgement to caller, and after 10 seconds, sets radio to the requested channel, ready for conversation. US model default. MANUAL Operator must manually choose to send acknowledgement, as well as change to requested channel. EU model default. ¼¼ Note: this does not apply for Routine Calls. Position request acknowledge (“POS ACK”) The radio can be configured to automatically acknowledge an incoming position request, require manual intervention to acknowledge, or simply ignore them: AUTO Sends current position automatically to calling radio. MANUAL Operator must manually choose to send position information. OFF All incoming position requests are ignored. Auto channel switch (“AUTO SWITCH”) When a DSC call is received, it may include a request to change to a specific channel for subsequent communications. If a channel switch request is included, your options are: • allow the radio to switch to the requested channel immediately by pressing SELECT, or • do nothing to allow the radio to automatically switch to the requested channel after a delay of 10 seconds, or • cancel the automatic switch and remain on the current channel by pressing the X button. However, automatic switching to a subsequent communications channel on receipt of a DSC call might in some cases disrupt important ongoing communications if the working channel changes without the operator knowing. The radio menus | Link-6 operator manual | 21 Automatic switching can be prevented for the current working channel by setting the AUTO SWITCH feature to OFF. Test acknowledge (“TEST ACK”) The radio can be configured to automatically acknowledge an incoming test call, or require manual intervention: MANUAL Operator must manually choose to send acknowledgement, or cancel. AUTO The DSC test call is automatically acknowledged after a 10 second delay. Receive distress while off Enabling this feature will allow the radio to raise an alert for DSC distress calls, even when the DSC feature is turned off. This will work regardless of whether or not an MMSI number has been entered. Timeout An inactivity timeout can be set up to return the radio to normal operational mode when no activity is seen from the radio operator. Different timers are used depending on the radios current state. AUTO These timers are used when the radio is engaged in a DSC call. Distress calls have a discreet timer from that used for all other DSC calls. Distress Select between NONE, 5 MINS, and 10 MINS. (default is NO TIMEOUT). Non Distress Select between NONE, 10 MINS, and 15 MINS. (default is 15 MINS). MANUAL This timer are used when the radio is in any menu. Select between NONE, 10 MINS, and 15 MINS. (default is 10 MINS). 22 | The radio menus | Link-6 operator manual Alarms GPS alert The GPS alert is a warning to the user that there is either no GPS connected, or the connected GPS is not outputting position data. It comprises of an audible alarm and visual alarm (screen flash and warning text); GPS alert function Turns ON or OFF all alerts for missing GPS data, including audible alarm, screen flash, and warning text. Alert volume Select between HIGH, LOW, and OFF. Screen flash Select between ON and OFF. WX alert (US/CAN models only) The WX alert is a warning to the user that a special weather station alert has been received. It comprises of an audible alarm and visual alarm; WX alert function Turns ON or OFF the radios response to weather alerts, including the audible alarm and screen flash. Alert volume Select between HIGH, LOW, and OFF. Screen flash Select between ON and OFF. DSC Alarm The alert volume and screen flash for some incoming call types can be altered. SAFETY, ROUTINE and URGENCY calls can individually be set to have: Alert volume HIGH, LOW or OFF. Screen flash ON or OFF. The radio menus | Link-6 operator manual | 23 ¼¼ Note: it is not possible to alter distress call alert settings Reset Use this setting to return every setting to the factory defaults except all MMSI settings, entries in your buddy list and any customized channel names. 24 | The radio menus | Link-6 operator manual 3 DSC call menu DSC (Digital Selective Calling) is a semi-automated method of establishing VHF, MF, and HF radio calls. One big advantage that DSC enabled radios offer is that they can receive calls from another DSC radio without being on the same channel as the calling radio. The calling radio will provide details on what channel to switch to so that voice communication can be established. There are various types of DSC calls - the type of call made determines information sent with the call, and how other radios respond to the incoming call. The following options are available when the DSC button is pressed; DSC calls There are four call types, as well as related options, that can be accessed from this menu; Individual Used to place a call to a single other vessel. The call can be initiated by selected an existing vessel in the CONTACTS; by entering in a new vessel’s MMSI (MANUAL); or by selecting a vessel in the RECENT list. When the SEND TO page is displayed, turn the channel knob to select the channel to use for voice communication. Distress The distress menu can be accessed via the DSC Calls menu, or directly by a short press of the Distress key on the front of the radio. The nature of the distress call must be selected from the list of options - this will be displayed on other radios receiving the call. After the Distress Call is sent, the radio waits for an acknowledgment. DSC call menu | Link-6 operator manual | 25 The Distress Call is automatically re-sent every 3.5 to 4.5 minutes until a distress acknowledgement is received. Alternatively the operator can select: RESEND (under OPTION - access by pressing the Menu/DSC button) used to immediately resend the Distress Call PAUSE (under OPTION - access by pressing the Menu/DSC button) used to pause the automatic Distress Call resend timer CANCEL (press ‘X’ button) to cancel the Distress Call If a distress cancel is sent, the display shows PTT --> REASON, prompting the operator to state the reason for the cancellation. • • After a DISTRESS ACK is received, the alert should be silenced, and the reason for distress should be clearly stated, pressing the ‘PTT’ on the MIC and talking. The following information (if available) is contained in the Distress Call: Nature Of Distress (if selected) Position information (the latest GPS or manual input position is held for 23.5 hours, or until the power is turned OFF). Group Used to place a call to a known group of vessel, all using the same ‘Group Call ID’ (GCID) number. The call can be initiated by selecting an existing group from the group list, by entering a new GCID, or by selecting a group from the RECENT list. When the SEND TO page is displayed, turn the channel knob to select the channel to use for voice communication. 26 | DSC call menu | Link-6 operator manual All ships Used to place a call to ALL DSC equiped vessels in range, much like a distress call. The nature of the call must be selected, and can be either SAFETY or URGENCY. When the SEND TO page is displayed, turn the channel knob to select the channel to use for voice communication. Call logs Shows a record of SENT, RECEIVED, and DISTRESS calls. POS request Used to send a postion request to another vessel. The call can be initiated by selected an existing vessel in the CONTACTS, by entering in a new vessel’s MMSI (MANUAL), or by selecting a vessel in the RECENT list. As no voice communication is required, no option is given to select a ship-ship channel. POS report Used to send a position report to the vessel being called. DSC test Used to place a TEST call to a single other vessel. The call can be initiated by selected an existing vessel in the CONTACTS, by entering in a new vessel’s MMSI (MANUAL), or by selecting a vessel in the RECENT list. Comms channel selection is not possible. MMSI/GPS Shows entered MMSI number and GPS fix information. Track buddy Up to 5 vessels from the Contacts list can be sent recurring position requests, at an adjustable time interval. DSC call menu | Link-6 operator manual | 27 Select buddy Shows any existing ‘buddies’ already selected. If they have an ‘x’ next to their name, they will be included in tracking. Choose ADD NEW to view the full contacts list, and choose who to add for tracking. Once there are buddys added to the list, select one to access options for setting tracking to ON or OFF, and for deletion from the Buddy list. Start tracking / Stop tracking Selecting START TRACKING option initiates tracking of buddies in the Track buddy list that have been set to tracking ON. The radio will show a screen indicating which buddy is being called. If there is no acknowledgement, the radio will retry the call after a few seconds. Only one retry is made per tracking interval. If tracking is already taking place, the START TRACKING text is replaced with STOP TRACKING. Interval The frequency that ‘buddys’ are polled with position requests can be adjusted, varying between 1 to 60 minutes. Contacts Used for the administation and calling of all individual Contacts as well as Groups. 28 | DSC call menu | Link-6 operator manual View/Add Contact Use this to store the names and associated MMSI’s of up to 50 vessels to be called regularly using DSC. Contacts are stored by name, in alphabetical order. Select ADD NEW to create a new contact. Selecting an existing name in the Contacts list gives the options to place a DSC call, make a position request, edit the contact, or delete the contact. View/Add Group Use this to create, edit, or delete up to 20 vessel groups, which are stored in alphanumeric order. Only a name and a Group Call ID (GCID) are required to set up a group. A GCID always starts with 0; the remaining digits can be set to whatever the user desires. All vessels intended to be in the same group must have a suitable DSC radio, and have the identical GCID number entered. Selecting an existing name in the group list gives the option to edit, delete, or call the group. ¼¼ Note: Adding a group to this list will in turn make the radio respond to a group call made from any other radio with the same group number in it’s memory. DSC call menu | Link-6 operator manual | 29 4 My channels The MY CHANNELS page is accessed by a long press of the VOL/SQL knob. This page is provided as a shortcut to frequently accessed channels. Channels on this list are also used in some SCAN options. The channels available on this page are chosen using EDIT MY CHANNELS. ¼¼ Note: the EDIT MY CHANNELS option is only shown on the MY CHANNELS page when no selections have yet been made. To add or remove channels from the list, see EDIT MY CHANNELS in “Scan menu” on page 15. 30 | My channels | Link-6 operator manual 5 Shortcuts The Shortcuts page is accessed by a long press of the VOL/SQL knob. This page is provided as a shortcut to frequently accessed settings. The shortcut options available on this page are subject to selections made in ADD/EDIT SHORTCUTS. Add/Edit shortcuts Choose from the list of options which menu options should be added as shourtcuts; ¼¼ Note: The MY VHF page is only available to the operator when enabled as a shortcut - it can’t be accessed via another menu. It’s purpose is solely for displaying radio information in one easy to access location. It provides detail on the MMSI number, GPS data status, and Vessel Callsign (if entered). Once the desired shortcuts have been selected, they are accessible directly from the Shortcuts page: Shortcuts | Link-6 operator manual | 31 6 Installation This Lowrance DSC VHF radio is designed to generate a digital maritime distress call to facilitate search and rescue. To be effective as a safety device, this radio must be used only within the geographic range of a shore-based VHF marine Channel 70 distress and safety watch system. The geographic range may vary but under normal conditions is approximately 20 nautical miles. Checklist The following items should be supplied in the box. Check before starting the installation and contact your dealer if an item is missing. ¼¼ Note: An antenna is not provided. Consult your Lowrance dealer for advice on selecting the correct antenna for your installation: ISH ENENGL UIn ISInH In GL al al al IO e anu anu anu AD uid M M M F R G ion ion ion VH er l at l at l at a a st st sta ISH GL EN ISH GL EN co g. nd ba w. co g. tin ch ya dra sim w. |w g. nd ba ba om ba e.c nc ra lo w. |w co m m co co g. g. nd nd 1. VHF radio with hand mic 2. Bracket for gimbal mounting 3. Gasket for recessed mounting 4. Documents: - user’s manual - warranty card - mounting template 5. Knobs for bracket 6. 8 A (3 AG) spare fuse 7. Mounting screw hole covers 8. Bulkhead mount for hand mic 9. 6 pcs 3.5 x 20 mm, stainless steel, panhead 10. 4 pcs 4 x 25 mm, stainless steel, panhead 32 | Installation | Link-6 operator manual 10 Installation options • • There are two mounting options for the radio: Bracket mount: Using the supplied gimballing bracket the radio can be mounted to either sit on top of, or hang underneath any flat horizontal surface. The radio can be removed for storage and the viewing angle can be adjusted. Flush mount: The radio is recessed into a cavity, showing only the face of the radio. The radio fixture is permanent and the viewing angle cannot be adjusted. Selecting a suitable mounting location • • • • • Whichever installation method you choose, please check the following before doing any cutting or drilling. The chosen location must: Be at least 1 m (3’) from the antenna Allow easy access to the rear of the radio for connection to the 12 V DC electrical source, the antenna and any network wiring Be at least 45 cms (1.5’) from a compass to avoid creating magnetic deviation of the compass. Have a suitable space close by for installing the microphone bulkhead mount Provide easy access to the controls on the front panel Viewing angle The VHF radio has a large LCD screen with the optimum horizontal and vertical viewing angles within approx. +/-20 deg. Ensure the chosen location provides a suitable view of the display. Ideally, the user should be directly in front of the display or no more than +/-20 deg from the front of the display. ¼¼ Note: If unsure, temporarily power up the radio and ensure the location is suitable. 20° 20° Installation | Link-6 operator manual 20° 20° | 33 Bracket installation The gimbal bracket provides an adjustable viewing angle with a 20º tilt range, so ensure the selected mounting location will provide the desired viewing and operating conditions: 1. Hold the bracket at the chosen location and use a soft pencil to mark the screw hole positions onto the mounting surface. 2. Use a 3mm (1/8” ) drill bit to drill the 4 pilot holes. 3. Using a Philips screwdriver, secure the bracket using the supplied 4x25mm self-tapping screws to the mounting location. 4. Fit the radio into the bracket. 5. Insert the two mounting knobs through the holes and tighten them sufficiently to hold the radio at the desired viewing angle. 6. Fit the mounting clips to the front of the radio to cover dash mount screw holes. 34 | Installation | Link-6 operator manual Flush installation 1. Tape the installation template onto the chosen mounting location. 2. Cut out the area marked by the solid dark line (the dashed line indicates the total area that will be covered by the radio fascia after installation). 3. Use a 2.5mm (3/32” ) drill bit to drill the 4 pilot holes. 4. Remove the installation template. 5. Fit the gasket to the radio. 6. Slide the radio into the cavity. 7. Using a Philips screwdriver, secure the radio using the supplied 3.5x20mm self-tapping screws to the mounting location. 8. Fit the mounting clips to cover the 4 mounting screws. Install the hand mic bulkhead bracket 1. Hold the hand mic bulkhead bracket at the chosen location and mark the screw hole positions on the mounting surface. ¼¼ Note: Ensure that the microphone curly cable will comfortably reach this location BEFORE you drill. 2. Use a 2.5mm (3/32” ) drill bit to drill the 2 pilot holes. 3. Using a Philips screwdriver, secure the Mic mount using the supplied 3.5x20mm self-tapping screws to the mounting location. 4. Hang the fist mic on the mount. Installation | Link-6 operator manual | 35 Connect the radio wiring All wiring on the radio should be done with the vessel power supply turned off. While radio power is polarity protected, the fuse will blow if connection is made wrong way round. Ensure any unused bare wires are isolated from each other, to prevent the potential of a short circuit. ! Warning: never operate the radio without the antenna connected. This may damage the transmitter. The connectors are on the rear of the base unit, as follows: 12 34 56 10 + _ 1. External speaker + (gray): connect to 4 Ohm, 4 Watt (minimum) external speaker positive 2. External speaker - (gray/black): connect to 4 Ohm, 4 Watt (minimum) external speaker negative 3. NMEA 0183 RX_A (yellow): connect to TX_A of chart plotter, or active GPS antenna 4. NMEA 0183 RX_B (green): connect to TX_B of chart plotter, or active GPS antenna 5. NMEA 0183 TX_A (white): connect to RX_A of chart plotter 6. NMEA 0183 TX_B (brown): connect to RX_B of chart plotter 7. GND: optional ground connection. May help with induced noise issues. 8. Antenna: connect to a marine VHF antenna using 50 ohm cable fitted with a PL-259 connector 9. Battery + (red): connect to vessel’s 12 V DC, via a switch panel or breaker (comes with inline 8 amp fuse ready fitted) 10. Battery - (black): connect to vessel’s negative busbar ¼¼ Note: external speaker and plotter connections are optional. 36 | Installation | Link-6 operator manual First startup configuration The first time the radio is powered up, the user is prompted to make a series of setting selections in order to allow the radio to perform to its full potential. Some steps must be completed; some are optional and can be completed later. The steps are outlined below for reference: Select the region and country the radio will be operated in. Enter MMSI number if known, or skip to next step. Re-enter number to confirm correct entry. ¼¼ Note: MMSI entry can only be done once. Changing the MMSI requires radio be returned to a Lowrance dealer. For some EU region radios only: Enter the ATIS ID number. Re-enter number to confirm correct entry. Enter vessel call sign if known, or skip to next step. Installation | Link-6 operator manual | 37 Set the time offset for your region. Choose whether to display time in 12 or 24 hour. MMSI and ATIS ID • • • • • • • The MMSI is a unique 9 digit number and the ATIS ID is a 10 digit number. They are used on marine transceivers that have DSC (Digital Select Calling) functionality. An MMSI remains with a vessel, even if the vessel is sold on. An MMSI has 9 numeric digits (xxxxxxxxx). Your MMSI must not commence with a ‘0’. A Group MMSI begins with ‘0’ followed by 8 numeric digits (0xxxxxxxx). A Coast Station MMSI begins with 00 followed by 7 numeric digits (00xxxxxxx). By law, you are not able to change your MMSI once it is entered into the radio. This is why there is the confirmation screen when entering the MMSI. An ATIS ID is only required in certain EU countries when navigating some inland waterways. It is usually a different number to your MMSI. If you need to have the MMSI in the radio changed, the radio must be taken back to your Lowrance dealer. ATIS Automatic Transmitter Identification System (ATIS) is required for vessels making VHF transmissions whilst on the inland waterways of the Regional Arrangement Concerning the Radiotelephone Service on Inland Waterways (RAINWAT) signatory countries. RAINWAT is an agreement to implement common principles and rules for the safe carriage of people and goods on Inland Waterways. The signatory countries are: Austria, Belgium, Bulgaria, Croatia, the Czech Republic, France, Germany, Hungary, Luxembourg, Moldova, Montenegro, the Netherlands, Poland, Romania, Serbia, the Slovak Republic and Switzerland. 38 | Installation | Link-6 operator manual Where a VHF is required on the inland waterways of the signatory countries, this must be capable of ATIS transmissions, and have the feature activated. An ATIS number is required which is issued by Ofcom when you add one or more pieces of ATIS equipment to your Ship Radio Licence. If you don’t have a user MMSI or ATIS ID, contact the appropriate licensing authority in your country. If you’re unsure who to contact, consult your Lowrance dealer. Installation | Link-6 operator manual | 39 7 Specifications GENERAL Power supply: 12 V DC battery system Nominal operating voltage: + 13.6 V DC Low battery alert: 10.5 V DC +/- 0.5 V Over voltage protection: > 15.8 V +/- 0.5 V Current drain (Transmit): ≤ 6 A @ 25 W / 1.5 A @ 1W (12 V DC) Current drain (Receive): Less than 450 mA in standby Replacement Fuse: 8 A, Glass type 3 AG; 32 mm (1.25”) Temperature range: -20 ºC to +55 ºC (-4 ºF to 131 ºF) Usable channels: International, USA, Canada, Weather (country specific) Mode: 16K0G3E (FM) / 16K0G2B (DSC) DSC mode: Class D (Global) with dual receiver (individual CH70) Standards - EU: EN60950-1, IEC 60529, EN 60945, EN 301 843-1 V2.1.1, EN301 843-2 V2.1.1, EN 301 025 V2.1.1, EN 300 698 V2.1.1 Standards - US/CAN: FCC Part 80, RSS-Gen Issue 4, RSS-182 Issue 5 Standards - INT: AS/NZS 4415.1:2003 Frequency range (Transmitter):156.025 - 157.425 MHz Frequency range (Receiver): 156.050 - 163.275 MHz Channel spacing: 25 KHz Frequency stability: ± 5 ppm Frequency control: PLL PHYSICAL LCD display (viewing): 42 mm x 34 mm (1.65” x 1.3”), FSTN Contrast control: Yes Backlight control: Yes Antenna connector: SO-239 (50 ohm) Waterproof: IPx7 Dimensions: W=166.7 mm (6.56”) x H=89.2 mm (3.5”) x D=161.4 mm (6.35”) - without bracket Weight: 1.18 kg (2.6 lbs) 40 | Specifications | Link-6 operator manual Compass safe distance: 0.5 m (1.5’) NMEA 0183 port: Yes NMEA 0183 input: RMC, GGA, GLL, GNS NMEA 0183 output: Yes, DSC ( for DSC call), DSE (for enhanced position) NMEA 2000 port: No External speaker: Yes FEATURES Flush mount kit Yes Local/Distant control: Yes Position polling: Yes Group call: Yes Call logs: Yes - 20 individual and 10 distress Channel naming: Yes Tri watch: Yes Favourite channel scan: Yes All scan: Yes User programmable MMSI: MMSI and NAME directory: Yes Yes - 20 numbers & group TRANSMITTER Frequency error: Max. output power: Transmitter protection: Max Frequency deviation: Spurious & harmonics Hi/Lo: Modulation Distortion ±3KHz: S/N at 3KHz Deviation: Audio Response at 1KHz: DSC TX deviation at 1.3K: DSC TX deviation at 2.1K: ATIS TX deviation at 1.3 KHz: ATIS TX deviation at 2.1 KHz: ≤± 1.5 KHz 25 W Open / short circuit of antenna ≤± 5 ≤ 0.25 µ W ≤ 10 % ≥ 40 dB +1 to -3dB of 6 dB/octave from 300 hz to 3 KHz 2.6 ± 0.26 KHz 4.2 ± 0.42 KHz 1.3 ± 0.13 KHz 2.1 ± 0.21 KHz Specifications | Link-6 operator manual | 41 RECEIVER 12dB SINAD sensitivity: 20db SINAD sensitivity: Adjacent CH selectivity: Spurious response: Intermodulation rejection: Residual noise level: Audio output power: 0.25 µV (distant) / 0.8 µV (local) 0.35 µV more than 70 db more than 70 db more than 68 db more than -40 db unsquelched 2 W (with 8 ohm at 10% distortion) 4 W (with 4 ohm external speaker ¼¼ Note: Specifications are subject to change without notice. 42 | Specifications | Link-6 operator manual 8 Channel Charts The following channel charts are provided for reference only and may not be correct for all regions. It is the operators responsibility to ensure correct channels and frequencies are used for local regulations. EU and INTERNATIONAL channel chart The following is a table of transmiting frequencies in the VHF maritime mobile band. ¼¼ NOTE: For assistance in understanding the Table, see Notes a) to zz) below. (WRC-15) ¼¼ NOTE: The Table below defines the channel numbering for maritime VHF communications based on 25 kHz channel spacing and use of several duplex channels. The channel numbering and the conversion of two-frequency channels for single-frequency operation shall be in accordance with Recommendation ITU-R M.1084-5 Annex 4, Tables 1 and 3. The Table below also describes the harmonized channels where the digital technologies defined in the most recent version of Recommendation ITU-R M.1842 could be deployed. (WRC15) Channel Charts | Link-6 operator manual | 43 Channel designator Notes 60 01 Inter- ship Port operations and ship movement Public corres- Single frequency Two frequency pondence From ship stations From coast stations m) 156.025 160.625 m) 156.050 160.650 61 m) 156.075 160.675 02 m) 156.100 160.700 62 m) 156.125 160.725 03 m) 156.150 160.750 63 m) 156.175 160.775 04 m) 156.200 160.800 64 m) 156.225 160.825 05 m) 156.250 160.850 65 m) 156.275 160.875 06 f) 156.300 2006 r) 160.900 160.900 66 m) 156.325 160.925 07 m) 156.350 160.950 67 h) 156.375 156.375 08 156.400 68 156.425 156.425 156.450 156.450 09 i) 69 156.475 156.475 10 h), q) 156.500 156.500 70 f ), j) 156.525 156.525 11 q) Digital selective calling for distress, safety and calling 156.550 156.550 71 156.575 156.575 12 156.600 156.600 72 i) 156.625 13 k) 156.650 156.650 73 h), i) 156.675 156.675 156.700 156.700 14 74 156.725 156.725 15 g) 156.750 156.750 75 n), s) 156.775 156.775 16 f) 156.800 156.800 76 n), s) 156.825 156.825 17 g) 156.850 156.850 77 156.875 DISTRESS, SAFETY AND CALLING 18 m) 156.900 161.500 78 m) 156.925 161.525 156.925 156.925 161.525 161.550 1078 44 | Transmitting frequencies (MHz) 2078 mm) 19 m) 156.950 Channel Charts | Link-6 operator manual 1019 156.950 2019 mm) 79 m) 1079 2079 mm) 20 m) 1020 2020 mm) 80 y), w1) 21 156.950 161.550 156.975 161.575 156.975 156.975 161.575 157.000 161.600 157.000 157.000 161.600 157.025 161.625 y), w1) 157.050 161.650 81 y), w1) 157.075 161.675 22 y), w1) 157.100 161.700 82 x), y), w1) 157.125 161.725 23 x), y), w1) 157.150 161.750 83 x), y), w1) 157.175 161.775 24 w), ww), x), AAA) 157.200 161.800 1024 w), ww), x), AAA) 157.200 2024 w), ww), x), AAA) 161.800 161.800 84 w), ww), x), AAA) 157.225 161.825 1084 w), ww), x), AAA) 157.225 2084 w), ww), x), AAA) 161.825 161.825 25 w), ww), ), AAA) 157.250 161.850 1025 w), ww), x), AAA) 157.250 2025 w), ww), x), AAA) 161.850 161.850 85 w), ww), x), AAA) 157.275 161.875 1085 w), ww), x), AAA) 157.275 2085 w), ww), x), AAA) 161.875 161.875 26 w), ww), x) 157.300 161.900 1026 w), ww), x) 157.300 2026 w), ww), x) 86 w), ww), x) 157.325 1086 w), ww), x) 157.325 2086 w), ww), x) 27 z), zx) 157.350 161.950 1027 z), zz) 157.350 157.350 2027* z) 161.950 161.950 87 z), zz) 157.375 157.375 28 z), zx) 157.400 162.000 x (digital only) x (digital only) x (digital only) x (digital only) 161.900 161.925 161.925 1028 z), zz) 157.400 157.400 2028* z) 162.000 162.000 88 z), zz) 157.425 157.425 Channel Charts | Link-6 operator manual | 45 * From 1 January 2019, channel 2027 will be designated ASM 1 and channel 2028 will be designated ASM 2. Editorial note: The note numbering below is provisional and will be aligned during final preparations of the new edition of the Radio Regulations. Notes referring to the Table General notes: a) Administrations may designate frequencies in the inter-ship, port operations and ship movement services for use by light aircraft and helicopters to communicate with ships or participating coast stations in predominantly maritime support operations under the conditions specified in Nos. 51.69, 51.73, 51.74, 51.75, 51.76, 51.77 and 51.78. However, the use of the channels which are shared with public correspondence shall be subject to prior agreement between interested and affected administrations. b) The channels of the present Appendix, with the exception of channels 06, 13, 15, 16, 17, 70, 75 and 76, may also be used for high-speed data and facsimile transmissions,subject to special arrangement between interested and affected administrations. c) The channels of the present Appendix, with the exception of channels 06, 13, 15, 16, 17, 70, 75 and 76, may be used for directprinting telegraphy and data transmission, subject to special arrangement between interested and affected administrations. (WRC-12) d) The frequencies in this table may also be used for radio communications on inland waterways in accordance with the conditions specified in No.5.226. e) Administrations may apply 12.5 kHz channel interleaving on a noninterference basis to 25 kHz channels, in accordance with the most recent version of Recommendation ITU-R M.1084,provided: • 46 | implementation of 12.5 kHz channel interleaving and consequential national requirements shall be subject to coordination with affected administrations. (WRC-12) Channel Charts | Link-6 operator manual Specific notes f) Channels 15 and 17 may also be used for on-board communications provided the effective radiated power does not exceed 1W, and subject to the national regulations of the administration concerned when these channels are used in its territorial waters. g) Within the European Maritime Area and in Canada, these frequencies (channels 10, 67, 73) may also be used, if so required, by the individual administrations concerned, for communication between ship stations, aircraft stations and participating land stations engaged in coordinated search and rescue and antipollution operations in local areas, under the conditions specified in Nos. 51.69, 51.73, 51.74, 51.75, 51.76, 51.77 and 51.78. h) The preferred first three frequencies for the purpose indicated in Note a) are 156.450 MHz (channel 09), 156.625 MHz (channel 72) and 156.675 MHz (channel73). i) Channel 70 is to be used exclusively for digital selective calling for distress, safety and calling. j) Channel 13 is designated for use on a worldwide basis as a navigation safety communication channel, primarily for intership k) navigation safety communications. It may also be used for the ship movement and port operations service subject to the national regulations of the administrations concerned. l) These channels may be operated as single frequency channels, subject to coordination with affected administrations. The following conditions apply for single frequency usage: • The lower frequency portion of these channels may be operated as single frequency channels by ship and coast stations. • Transmission using the upper frequency portion of these channels is limited to coast stations. • If permitted by administrations and specified by national regulations, the upper frequency portion of these channels may be used by ship stations for transmission. All precautions should Channel Charts | Link-6 operator manual | 47 be taken to avoid harmful interference * From 1 January 2019, channel 2027 will be designated ASM 1 and channel 2028 will be designated ASM 2. w. In Regions 1 and 3: Until 1 January 2017, the frequency bands 157.200-157.325 MHz and 161.800-161.925 MHz (corresponding to channels: 24, 84, 25, 85, 26 and 86) may be used for digitally modulated emissions, subject to coordination with affected administrations. Stations using these channels or frequency bands for digitally modulated emissions shall not cause harmful interference to, or claim protection from, other stations operating in accordance with Article 5. From 1 January 2017, the frequency bands 157.200-157.325 MHz and 161.800-161.925 MHz (corresponding to channels: 24, 84, 25, 85, 26 and 86) are identified for the utilization of the VHF Data Exchange System (VDES) described in the most recent version of Recommendation ITU-R M.2092. These frequency bands may also be used for analogue modulation described in the most recent version of Recommendation ITU-R M.1084 by an administration that wishes to do so, subject to not causing harmful interference to, or claiming protection from other stations in the maritime mobile service using digitally modulated emissions and subject to coordination with affectedadministrations. (WRC-15) 48 | Channel Charts | Link-6 operator manual ww. In Region 2, the frequency bands 157.200-157.325 and 161.800161.925 MHz (corresponding to channels: 24, 84, 25, 85, 26 and 86) are designated for digitally modulated emissions in accordance with the most recent version of Recommendation ITU-R M.1842. In Canada and Barbados, from 1 January 2019 the frequency bands 157.200-157.275 and 161.800-161.875 MHz (corresponding to channels: 24, 84, 25 and 85) may be used for digitally modulated emissions, such as those described in the most recent version of Recommendation ITU-R M.2092, subject to coordination with affected administrations. (WRC-15) x) From 1 January 2017, in Angola, Botswana, Lesotho, Madagascar, Malawi, Mauritius, Mozambique, Namibia, Democratic Republic of the Congo, Seychelles, South Africa, Swaziland, Tanzania, Zambia and Zimbabwe, the frequency bands 157.125-157.325 and 161.725161.925 MHz (corresponding to channels: 82, 23, 83, 24, 84, 25, 85, 26 and 86) are designated for digitally modulated emissions. From 1 January 2017, in China, the frequency bands 157.150 157.325 and 161.750 - 161.925 MHz (corresponding to channels: 23, 83, 24, 84, 25, 85, 26 and 86) are designated for digitally modulated emissions. (WRC-12) y) These channels may be operated as single or duplex frequency channels, subject to coordination with affected administrations. (WRC-12) AAA) From 1 January 2019, the channels 24, 84, 25 and 85 may be merged in order to form a unique duplex channel with a bandwidth of 100 kHz in order to operate the VDES terrestrial component described in the most recent version of Recommendation ITU-RM.2092. (WRC15) mm) Transmission on these channels is limited to coast stations. If permitted by administrations and specified by national regulations, these channels may be used by ship stations for transmission. Channel Charts | Link-6 operator manual | 49 * From 1 January 2019, channel 2027 will be designated ASM 1 and channel 2028 will be designated ASM 2. w1) In Regions 1 and 3: Until 1 January 2017, the frequency bands 157.025-157.175 MHz and 161.625-161.775 MHz (corresponding to channels: 80, 21, 81, 22, 82, 23 and 83) may be used for digitally modulated emissions, subject to coordination with affected administrations. Stations using these channels or frequency bands for digitally modulated emissions shall not cause harmful interference to, or claim protection from, other stations operating in accordance with Article 5. From 1 January 2017, the frequency bands 157.025-157.100 MHz and 161.625-161.700 MHz (corresponding to channels: 80, 21, 81 and 22) are identified for utilization of the digital systems described in the most recent version of Recommendation ITU-R M.1842 using multiple 25 kHz contiguous channels. From 1 January 2017, the frequency bands 157.150-157.175 MHz and 161.750-161.775 MHz (corresponding to channels: 23 and 83) are identified for utilization of the digital systems described in the most recent version of Recommendation ITU-R M.1842 using two 25 kHz contiguous channels. From 1 January 2017, the frequencies 157.125 MHz and 161.725 MHz (corresponding to channel: 82) are identified for the utilization of the digital systems described in the most recent version of Recommendation ITU-R M.1842. The frequency bands 157.025-157.175 MHz and 161.625-161.775 MHz (corresponding to channels: 80, 21, 81, 22, 82, 23 and 83) can also be used for analogue modulation described in the most recent version of Recommendation ITU-R M.1084 by an administration that wishes to do so, subject to not claiming protection from other stations in the maritime mobile service using digitally modulated emissions and subject to coordination with affected administrations. (WRC-15) zx) In the United States, these channels are used for communication between ship stations and coast stations for the purpose of public correspondence. (WRC-15) zz) From 1 January 2019, channels 1027, 1028, 87 and 88 are used as single-frequency analogue channels for port operation and ship movement. (WRC-15) Source: ITU Radio Regulations (2016); reproduced with permission from ITU 50 | Channel Charts | Link-6 operator manual USA channel chart CH #: Ship Transmit MHz Ship Receive MHz 1001 156.050 156.050 S/D/R Use / Notes / Description: Port Operations and Commercial, VTS. Available only in New Orleans / Lower Mississippi area. 1063 156.175 156.175 Port Operations and Commercial, VTS. Available only in New Orleans / Lower Mississippi area. 1005 156.250 156.250 Port Operations or VTS in the Houston, New Orleans and Seattle areas. 1065 156.275 156.275 Port Operations 156.300 Intership Safety Port Operations 156.300 1066 156.325 156.325 1007 156.350 156.350 Commercial. VDSMS 67 156.375 Commercial. Used for Bridge-to-bridge communications in lower Mississippi River. Intership only. Commercial (Intership only). VDSMS 156.375 156.400 156.400 68 156.425 156.425 Non-Commercial. VDSMS 156.450 156.450 Boater Calling. Commercial and Non-Commercial. VDSMS 69 156.475 156.475 Non-Commercial. VDSMS 10 156.500 156.500 Commercial. VDSMS Digital Selective Calling (voice communications not allowed) 70 156.525 156.525 11 156.550 156.550 Commercial. VTS in selected areas. VDSMS 71 156.575 156.575 Non-Commercial. VDSMS Port Operations. VTS in selected areas. 12 156.600 156.600 72 156.625 156.625 Non-Commercial (Intership only). VDSMS Intership Navigation Safety (Bridge-to-bridge). Ships >20m length maintain a listening watch on this channel in US waters. 13 156.650 156.650 73 156.675 156.675 Port Operations 14 156.700 156.700 Port Operations. VTS in selected areas. 74 156.725 156.725 Port Operations 16 156.800 156.800 International Distress, Safety and Calling. Ships required to carry radio, USCG, and most coast stations maintain a listening watch on this channel. 17 156.850 156.850 State & local govt maritime control 77 156.875 156.875 Port Operations (Intership only) 1018 156.900 156.900 Commercial. VDSMS 1078 156.925 156.925 Non-Commercial. VDSMS 1019 156.950 156.950 Commercial. VDSMS 1079 156.975 156.975 Commercial. Non-Commercial in Great Lakes only. VDSMS 157.000 161.600 Port Operations (duplex) 1020 157.000 157.000 Port Operations 20 1080 157.025 157.025 Commercial. Non-Commercial in Great Lakes only. VDSMS 1021 157.050 157.050 U.S. Coast Guard only 1081 157.075 157.075 U.S. Government only - Environmental protection operations. 1022 157.100 157.100 Coast Guard Liaison and Maritime Safety Information Broadcasts. Broadcasts announced on channel 16. 1082 157.125 157.125 U.S. Government only 1023 157.150 157.150 U.S. Coast Guard only 1083 157.175 157.175 U.S. Coast Guard only 24 161.800 Public Correspondence (Marine Operator). VDSMS 157.200 84 157.225 161.825 Public Correspondence (Marine Operator). VDSMS 25 157.250 161.850 Public Correspondence (Marine Operator). VDSMS 85 157.275 161.875 Public Correspondence (Marine Operator). VDSMS 26 157.300 161.900 Public Correspondence (Marine Operator). VDSMS 86 157.325 161.925 Public Correspondence (Marine Operator). VDSMS 27 157.350 161.950 Public Correspondence (Marine Operator). VDSMS 87 157.375 157.375 Public Correspondence (Marine Operator). VDSMS Channel Charts | Link-6 operator manual | 51 28 157.400 162.000 Public Correspondence (Marine Operator). VDSMS 88 157.425 157.425 Commercial, Intership only. VDSMS 15 -- 156.750 Environmental (Receive only). Used by Class C EPIRBs. 52 | Channel Charts | Link-6 operator manual CANADA Channel Chart Channel # MHz (ship) MHz (coast) S/D/R 156.050 160.650 156.100 160.700 156.150 160.750 156.200 160.800 156.250 160.850 156.300 156.300 156.350 160.950 Remarks Public Correspondence. DFO/CCG liaison. Commercial fishing. SAR/Safety Communications between ships and aircraft. Intership. 156.400 156.400 156.450 156.450 VTS. Intership. 10 156.500 156.500 VTS. Intership. 11 156.550 156.550 VTS. Pilotage. 12 156.600 156.600 VTS. Port Operations. Pilotage. 13 156.650 156.650 VTS. Bridge to Bridge navigational traffic. 14 156.700 156.700 VTS. Port Operations. Pilotage. 15 156.750 156.750 16 156.800 156.800 17 156.850 156.850 18 156.900 161.500 19 156.950 161.550 20 157.000 161.600 21 157.050 161.650 22 157.100 161.700 International Distress and Safety (RT). CCG MSI Broadcasts. CCG CMB. 23 157.150 161.750 Public Correspondence. 24 157.200 161.800 Public Correspondence. 25 157.250 161.850 CCG MSI Broadcast. Public Correspondence. 26 157.300 161.900 CCG MSI Broadcast. Public Correspondence. Public Correspondence. 27 157.350 161.950 28 157.400 162.000 60 156.025 160.625 61 156.075 160.675 DFO/CCG liaison. Commercial fishing. 62 156.125 160.725 DFO/CCG liaison. Commercial fishing. 63 156.175 160.775 64 156.225 160.825 65 156.275 160.875 66 156.325 160.925 67 156.375 156.375 68 156.425 156.425 69 156.475 156.475 70 156.525 156.525 International Distress and Safety (DSC). 71 156.575 156.575 VTS 72 156.625 73 156.675 156.675 74 156.725 156.725 75 156.775 156.775 76 156.825 156.825 77 156.875 156.875 78 156.925 161.525 79 156.975 161.575 80 157.025 161.625 VTS Channel Charts | Link-6 operator manual | 53 81 157.075 161.675 82 157.125 161.725 DFO/CCG liaison. 83 157.175 161.775 CCG MSI Broadcast. 84 157.225 161.825 Public Correspondence. 85 157.275 161.875 Public Correspondence. 86 157.325 161.925 87 157.375 157.375 Port operations. Ship movement. 88 157.425 157.425 Port Operations. Ship movement. 1001 156.050 156.050 1005 156.250 156.250 1007 156.350 156.350 156.900 157.000 VTS 1018 156.900 1019 156.950 1020 157.000 1021 157.050 DFO/CCG liaison. 1022 157.100 DFO/CCG liaison. CCG CMB. 1023 161.750 1024 157.200 1025 157.250 1026 157.300 1027 157.350 1028 157.350 1063 156.175 DFO/CCG liaison. 157.350 156.175 CCG CMB. CCG MSI Broadcast. 1065 156.275 156.275 1066 156.325 156.325 1078 156.925 156.925 1079 156.975 156.975 157.025 1080 157.025 1083 157.175 1084 157.225 1085 157.275 1086 157.325 2019 161.550 2020 161.600 Intership for fishing vessels. DFO/CCG liaison. CCG CMB. 2024 161.800 161.800 VDES 2025 161.850 161.850 VDES 161.900 2027 161.950 161.950 ASM-1 (effective 01/2019). 2028 162.000 162.000 ASM-2 (effective 01/2019). 2078 161.525 2079 161.575 2026 2084 161.825 VDES 2085 161.875 VDES 2086 161.925 54 | 161.825 Channel Charts | Link-6 operator manual USA & Canada WEATHER Channels Channel Frequency (MHz) Country Note WX1 162.550 USA and CANADA Rx only WX2 162.400 USA and CANADA Rx only WX3 162.475 USA and CANADA Rx only WX4 162.425 USA Rx only WX5 162.450 USA Rx only WX6 162.500 USA Rx only WX7 162.525 USA Rx only Channel Charts | Link-6 operator manual | 55 *988-11181-001*
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:05:25 11:37:53+12:00 Creator : Adobe InDesign CC 2017 (Windows) Modify Date : 2017:05:29 11:40:35-07:00 Language : en-US XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:16059f16-8cdf-453a-8bd5-b7f8539ee61e Original Document ID : adobe:docid:indd:a3d0d643-38ef-11df-9798-dacf2274d1bc Document ID : xmp.id:1cc5f40a-afeb-e34f-9afc-f28607921c09 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:19dc4e29-5fd6-7f44-a17f-57481b3e931b Derived From Document ID : xmp.did:26447880-56ff-9147-99b4-96ee5cb9c7bf Derived From Original Document ID: adobe:docid:indd:a3d0d643-38ef-11df-9798-dacf2274d1bc Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2017:05:25 11:37:53+12:00 Metadata Date : 2017:05:29 11:40:35-07:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 56EXIF Metadata provided by EXIF.tools