Nec 2400 Ipx Users Manual NEAX Installation

2015-01-24

• Installation Manual
  • BEFORE THE USE OF THIS MANUAL
  • TABLE OF CONTENTS
  • CHAPTER 1 INTRODUCTION
    • 1. GENERAL
    • 2. HOW TO FOLLOW THE MANUAL
      • 2.1 Outline
      • 2.2 How to Follow NAPs
      • 2.3 How To Follow Trees
      • 2.4 Figure and Table Numbers
      • 2.5 Essential/Critical Information
  • CHAPTER 2 INSTALLATION DESIGN
    • 1. GENERAL
    • 2. ENVIRONMENTAL REQUIREMENTS
      • 2.1 Temperature And Humidity
      • 2.2 Heat Generation From Switching Equipment
    • 3. FLOOR SPACE
    • 4. FLOOR LOAD REQUIREMENTS
    • 5. EQUIPMENT ROOM REQUIREMENTS
      • 5.1 Floor Surface
      • 5.2 Wall
      • 5.3 Ceiling
      • 5.4 Lighting Facilities
    • 6. POWER SUPPLY REQUIREMENTS
      • 6.1 Main Source Power
      • 6.2 Current Consumption
      • 6.3 Power Distribution Box Requirements
      • 6.4 Grounding
    • 7. MDF REQUIREMENTS
    • 8. INSTALLATION TOOLS
    • 9. SYSTEM ACCOMMODATION
      • 9.1 System Accommodation
      • 9.2 Circuit Card Locations
      • 9.3 Preparation of Trunking Diagram
      • 9.4 Preparation of Module Group Face Layout And Port Accommodation Diagram
      • 9.5 Preparation of Circuit Card Switch Setting Sheets
    • 10. INSTALLATION CABLES
      • 10.1 AC Input, DC Power, And Ground Cables
      • 10.2 Cables Between The PBX And MDF
  • CHAPTER 3 INSTALLATION PROCEDURE
    • 1. GENERAL
    • 2. PRECAUTIONS BEFORE BEGINNING INSTALLATION
      • 2.1 Outline
    • 3. INSTALLATION PROCEDURE
      • NAP-200-001
      • NAP-200-002
      • NAP-200-003
      • NAP-200-004
      • NAP-200-005
      • NAP-200-006
      • NAP-200-007
      • NAP-200-008
      • NAP-200-009
      • NAP-200-010
      • NAP-200-011
      • NAP-200-012
      • NAP-200-013
      • NAP-200-014
      • NAP-200-015
      • NAP-200-016
      • NAP-200-017
      • NAP-200-018
  • CHAPTER 4 SYSTEM STARTUP
    • 1. GENERAL
    • 2. PRECAUTIONS BEFORE BEGINNING SYSTEM STARTUP
    • 3. SYSTEM STARTUP PROCEDURE
      • NAP-200-019
      • NAP-200-020
      • NAP-200-021
      • NAP-200-022
      • NAP-200-023
  • CHAPTER 5 INSTALLATION TEST PROCEDURE
    • 1. HOW TO ENTER DATA IN THE TEST CHECK COLUMN
    • 2. BASIC CONNECTION TEST
      • 2.1 Outline
      • 2.2 Basic Connection Test Procedure
      • NAP-200-024
      • NAP-200-025
    • 3. SYSTEM INITIALIZED TEST
      • 3.1 Outline
      • 3.2 System Initialized Test Procedure
      • NAP-200-026
      • NAP-200-027
      • NAP-200-028
    • 4. PORT CONNECTION TEST
      • 4.1 Outline
      • 4.2 Port Connection Test Procedure
      • NAP-200-029
      • NAP-200-030
      • NAP-200-031
      • NAP-200-032
      • NAP-200-033
      • NAP-200-034
      • NAP-200-035
      • NAP-200-036
      • NAP-200-037
      • NAP-200-038
      • NAP-200-039
      • NAP-200-040
      • NAP-200-041
      • NAP-200-042
    • 5. OVERALL TEST
      • 5.1 Outline
      • 5.2 Overall Test Procedure
      • NAP-200-043
      • NAP-200-044
      • NAP-200-045
      • NAP-200-046
      • NAP-200-047
      • NAP-200-048
      • NAP-200-049
    • 6. IP CONNECTION TEST
      • 6.1 Outline
      • 6.2 IP Connection Test Procedure
      • NAP-200-050
      • NAP-200-051
      • NAP-200-052
      • NAP-200-053
      • NAP-200-054
      • NAP-200-055
      • NAP-200-056
  • CHAPTER 6 FAULT RECOVERY DURING TESTS
    • 1. GENERAL
    • 2. OUTLINE OF PROCEDURE FOR FAULT RECOVERY
      • NAP-200-057
      • NAP-200-058
      • NAP-200-059
  • CHAPTER 7 WORK AFTER INSTALLATION TESTS
    • 1. OFFICE DATA MANAGEMENT
      • 1.1 Preservation of Office Data
    • 2. PREPARATION OF TEST RESULT REPORT
    • 3. MOUNTING OF THE FRONT AND REAR COVERS
    • 4. ATTACHMENT OF INTER-FRAME BRACKETS
    • 5. SITE CLEANING