Nedap N V INVEXS190 Inductive Proximity Card Reader User Manual

N. V. Nederlandsche Apparatenfabriek NEDAP Inductive Proximity Card Reader Invexs190 InstallManual US v6

a href="https://usermanual.wiki/Nedap-N-V" itemprop="url"> Nedap N V >

Contents

manual pt 1

Date : 08 April 2013 Version 6 This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no licence under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. © Nedap N.V. P.O. Box 6 NL-7140 AC GROENLO The Netherlands Page 1 of 4 Part.no.: 5281121Invexs 190 readers Mifare DESfire dual technology mullion readers GENERAL The Invexs 190 reader series is capable of reading (simultaneously) Mifare and DESFire credentials due to its dual reader technology. The Invexs 190 is designed to be used on door pillars (mullion) and suitable for outside and inside use. A model with keypad is also available. The Invexs output must be set to RS485 protocol (encrypted). Functionality and output are determined by the configuration of the Invexs reader. The configuration is defined using the programm AEreco, and deployed by the configuration card or via AEmon. Three LEDs (red, green, blue) and beeper are included. LEDs around the keypad ciphers light up only in case a PIN code is requested. The pigtail cable can be lead directly backwards or when using the additional spacer (art. nr . 9949887) to the top or bottom. DIMENSIONS MOUNTING PROCEDURE INVEXS For mounting the Invexs 190, the mounting plate must be placed on the wall first. For removing the mounting plate from the Invexs 190, unscrew the screw (1) (Torx, M5) at the bottom of the Invexs and push the Invexs 190 slightly up (2). The plate can be mounted using the 4 holes. Place the cable to the correct position and replace the Invexs 190. ® Install Manual Dimensions: 7.52 x 2 x 1.2 in. 4 mounting holes available at 1.26 x 6.1in Cable pigtail: 10 x 26AWG shielded, 10 ft Optional spacer (max thickness 0.4 in) is available for other cable outlet (top or bottom) Un screw Push up 2 1 Mounting plate 1 19130 10 x 26AWG Shield 32 15512 40 14.5 50 4 x 5 75 Note: drawing dimensions are in mm
Download:
Mirror Download [FCC.gov]
Document ID1934594
Application IDVaSbJKHtWYyHNYdMP3HBnw==
Document Descriptionmanual pt 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize31.97kB (399655 bits)
Date Submitted2013-04-08 00:00:00
Date Available2013-04-09 00:00:00
Creation Date2013-04-08 16:50:58
Producing SoftwareGPL Ghostscript 8.15
Document Lastmod2013-04-08 16:50:58
Document TitleMicrosoft Word - Invexs190_InstallManual_US_v6.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: j.hulshof
FCC ID Filing: CGDINVEXS190

Navigation menu