Neptune Technology Group R450M TRANSMITTER MODULE User Manual Company Letterhead

Neptune Technology Group Inc. TRANSMITTER MODULE Company Letterhead

User Manual

  1600 Alabama Highway 229, Tallassee  AL  36078   (334)293-6555   Manual information for products utilizing the R450M   All products containing the R450M modular RF circuit board will have the following information included in the product manual.   FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  conditions:  (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.   Changes or modifications to this device not expressly approved by Neptune Techcould void the user's authority to operate the equipment.  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna.  •Increase the separation between the equipment and receiver.  •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  •Consult the dealer or an experienced radio/TV technician for help.”   RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.   Professional Installation In accordance with section 15.203 of the FCC rules and regulations, the MIU must be professionally installed by trained utility meter installers.
  1600 Alabama Highway 229, Tallassee  AL  36078   (334)293-6555 Industry Canada The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.  This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Cet appareillage numérique de la classe B répond à toutes les exigences de l'interférence canadienne causant des règlements d'équipement. L'opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l'interférence nocive, et (2) ce dispositif doit accepter n'importe quelle interférence reçue, y compris l'interférence qui peut causer l'opération peu désirée.   To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.   This device has been designed to operate with the antennas listed below, and having a maximum gain of 0dBd. Antennas not included in this list or having a gain greater than 0dBd are strictly prohibited for use with this device. The required antenna impedance is 75 ohms.  R450 Wall MIU Antenna (Neptune Technology Group, Inc. model number 12795-000) R450 Wall MIU High Gain Antenna  (Neptune Technology Group, Inc. model number 12986-000) R450 Pit MIU Lid Mount Antenna (Neptune Technology Group, Inc. model number 12796-100, 6 ft., 12796-200, 25 ft.)

Navigation menu