Nero ____NCD_UML_Nero CoverDesigner Cover Designer Instruction Manual Eng

User Manual: Nero CoverDesigner - Instruction Manual Free User Guide for Nero Software, Manual - page1

Open the PDF directly: View PDF .
Page Count: 76

Download
Open PDF In Browser	View PDF

Manual
Nero CoverDesigner

Copyright and Trademark Information
Copyright and Trademark Information
This document, like the software described therein, is provided as a license and may only be used or reproduced in accordance with
the licensing agreement. The contents of this document, as well as the associated software, is subject to change without prior notice.
Nero AG rejects any responsibility for the correctness of the contents of this document and rejects any claims that transcend the
clauses of the guarantee agreement.
This document and all of its contents are protected by copyright and are the property of Nero AG. All rights reserved. In addition, this
document contains material that is protected by internationally valid copyright. This document may not be reproduced, transmitted, or
transcribed in whole or in part without the express written permission of Nero AG.
Please keep in mind that existing graphics, pictures, videos, music titles or other materials that you may wish to insert or transcribe
into projects may be protected by copyright. The unauthorized use of this type of material in your projects may violate the rights of
the owner of the copyright. Make sure that you obtain all necessary authorizations from the owner of the copyright.
Unless you own the copyright, have permission from the copyright owner or your actions fall under the "fair use" provisions of copyright law, you may be violating national or international copyright laws. The transcribing, duplication, modification or publication of
copyright-protected material may lead to claims for damages and the enforcement of other legal measures against you. If you are
unsure of your rights, you should contact your legal advisor.
Some Nero Suite applications require technologies developed by third-party manufacturers and may be included in Nero Suite as
demo versions. These applications can be activated online free of charge or by sending an activation fax to have unlimited use of the
version. Nero will only transmit the data necessary for activation of the technology licensed from third parties. For unlimited use of
Nero Suite, it is therefore necessary to have an Internet connection or a fax machine.
Copyright © 2006 - 2009 Nero AG and its licensors. All rights reserved.
Nero, Nero Digital, Nero BackItUp, Nero Essentials, Nero Express, Nero ImageDrive, Nero LiquidTV, Nero MediaHome, Nero Recode, Nero RescueAgent, Nero ShowTime, Nero Simply Enjoy, Nero StartSmart, Nero Vision, InCD, Move it, PhotoSnap, the SecurDisc logo, Burn-At-Once, DNC Dynamic Noise Control, LayerMagic, Nero DMA Manager, SmartDetect, SmoothPlay, Superresolution, Nero Surround, Nero LiquidMedia, Nero MediaStreaming and UltraBuffer are trademarks or registered trademarks of Nero
AG.
Adobe, Acrobat, Acrobat Reader and Premiere are trademarks or registered trademarks of Adobe Systems, Incorporated. AMD Athlon, AMD Opteron, AMD Sempron, AMD Turion, ATI Catalyst and ATI Radeon are trademarks or registered trademarks of Advanced
Micro Devices, Inc. ATSC is a trademark of the Advanced Television Committee. ICQ is a registered trademark of AOL, LLC. Apple,
iPhoto, iPod, iTunes, iPhone, FireWire, and Mac are trademarks or registered trademarks of Apple, Inc. ARM is a registered trademark of ARM, Ltd. AudibleReady is a registered trademark of Audible, Inc. BenQ is a trademark of the BenQ Corporation. Blu-ray
Disc is a trademark of Blu-ray Disc Association. CyberLink is a registered trademark of CyberLink Corp. DLNA is a registered trademark of Digital Living Network Alliance. DivX and DivX Certified are registered trademarks of DivX, Inc. Dolby, Pro Logic and the
double-D symbol are trademarks or registered trademarks of Dolby Laboratories, Inc. DTS and DTS Digital Surround are registered
trademarks of DTS, Inc. DVB is a registered trademark of the DVB Project. Freescale is a trademark of Freescale Semiconductor,
Inc. Google and YouTube are trademarks of Google, Inc. WinTV is a registered trademark of Hauppauge Computer Works, Inc.
Intel, Intel XScale, Pentium and Core are trademarks or registered trademarks of Intel Corporation. Linux is a registered trademark
of Linus Torvalds. Memorex is a registered trademark of Memorex Products, Inc. ActiveX, ActiveSync, DirectX, DirectShow, Internet
Explorer, Microsoft, HDI, MSN, Outlook, Windows, Windows Mobile, Windows NT, Windows Server, Windows Vista, Windows Media, Xbox, Xbox 360, the Windows Vista start button and the Windows logo are trademarks or registered trademarks of Microsoft
Corporation. My Space is a trademark of MySpace, Inc. NVIDIA, GeForce and ForceWare are trademarks or registered trademarks
of NVIDIA Corporation. Nokia is a registered trademark of Nokia Corporation. CompactFlash is a registered trademark of SanDisk
Corporation. Sony, Memory Stick, PlayStation, PLAYSTATION and PSP are trademarks or registered trademarks of Sony Corporation. HDV is a trademark of Sony Corporation and Victor Company of Japan, Limited (JVC). UPnP is a registered trademark of the
UPnP Implementers Corporation. Labelflash is a registered trademark of Yamaha Corporation.
The trademarks mentioned here are named for information purposes only. All trade names and trademarks are the property of their
respective owners.
Nero AG, Im Stoeckmaedle 13-15, D-76307 Karlsbad, Germany

Nero CoverDesigner

Table of contents

Table of contents
1
1.1
1.2
1.3
1.4

Start Successfully
About the Manual
About Nero CoverDesigner
Nero CoverDesigner Versions
Working With Nero CoverDesigner

6
6
6
6
7

Starting The Program

3
3.1
3.2
3.2.1
3.2.2
3.2.3
3.2.4
3.2.5
3.2.6
3.2.7
3.3
3.4
3.5

Main Screen
Menu Bar
Toolbars
Standard Toolbar
View Toolbar
Text Toolbar
Modify Objects Toolbar
Tools Toolbar
Align Toolbar
Floating Toolbar
Drawing Area
Objects
Dynamic Objects

9
9
10
10
11
12
12
12
13
14
14
14
15

4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
4.11

New Document Window
Document Type
Standard Document Type
DVD Case Document Type
Multi Box Document Type
Maxi Document Type
Slim Pack Document Type
Mini CD Document Type
Biz Card Document Type
Rectangular Biz Card Document Type
Biz Card Envelope Document Type
LightScribe Document Type

16
17
17
18
18
19
19
19
20
20
20
20

5
5.1
5.2

Creating a New Document
Creating a Nero Digital Document
Creating a New Document or Image Document

21
21
21

6
6.1
6.2
6.3

Editing a Document
Adding a Cover Element
Modifying the Template Later on
Assigning a Paper Stock

23
23
23
24

Nero CoverDesigner

III

Table of contents
7
7.1
7.2
7.3
7.4
7.5

Designing The Cover Element
Inserting an Object
Editing an Object
Converting Artistic Text
Applying Image Effects
Inserting And Editing a Background

25
25
26
28
28
29

8
8.1
8.2
8.3
8.4
8.5
8.6
8.6.1
8.6.2
8.6.3

Document Data Window
Document
Disc
Audio/Chapter Data
File System
Video/Picture Data
Data Entry
Track/Chapter
File Information
Picture

31
32
33
33
33
34
34
34
35
35

9
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
9.10

Properties And Background Properties Window
Pen Tab
Brush Tab
Text Tab
Text Box Tab
Bend Tab
Image Tab
Image Effects
Import Picture Tab
Tracks And Folder Tab
Field Tab

36
37
38
40
40
40
41
42
44
44
46

10
10.1

Geometry Window
Geometry Window For Bent Objects

48
48

Align Elements Window

12
12.1
12.2

Design Tools
Grid
Guidelines

51
51
51

13
13.1
13.2

Creating And Editing a Template
Creating a Template
Modifying a Template

52
52
53

Saving a Document

Storing a Cover in a Nero Digital File

16
16.1

Printing the Document
Print Window

56
56

Nero CoverDesigner

Table of contents
16.1.1
16.1.2

Properties Tab
Elements Tab

57
58

17
17.1
17.2
17.3
17.4

Print Settings And Paper Stocks
Printer Calibration
Paper Stocks Window
Creating a Paper Stock Profile
Default Paper Stock Settings

60
60
60
63
64

18
18.1

Printing LightScribe Label
LightScribe Print Properties Window

65
66

19
19.1

Printing Labelflash Label
Labelflash Print Properties Window

67
68

20
20.1
20.2

Program Settings
Application Preferences Window
Specifying Default Settings For Objects

70
70
71

21
21.1
21.2
21.3

Technical Information
System Requirements
Image Formats
Formats For Playlists

72
72
72
72

Index

Contact

Nero CoverDesigner

Start Successfully

1.1

About the Manual
This manual is intended for all users who want to learn how to use Nero CoverDesigner. It is
process-based and explains how to achieve a specific objective on a step-by-step basis.
To make best use of this documentation, please note the following conventions:
Indicates warnings, preconditions or instructions that have to be precisely followed.
Indicates additional information or advice.

1. Start …

The number at the beginning of a line indicates a prompt for action.
Carry out these actions in the order specified.
Indicates an intermediate result.
Indicates a result.

1.2

Indicates text passages or buttons that appear in the program interface. They are shown in boldface.

(see…)

Indicates references to other chapters. They are executed as links
and are shown in red and underlined.

[…]

Indicates keyboard shortcuts for entering commands.

About Nero CoverDesigner
Nero CoverDesigner is a powerful application for creating custom cover elements such as
booklets, inlays, and labels. Nero CoverDesigner supports cover elements for a wide range
of disc types, such as CD jewel cases, DVD cases, multi-boxes, maxi CDs, slim packs, business cards, and more.
Nero CoverDesigner supports LightScribe and Labelflash recorders, which you can use to
print labels directly on compatible media.

1.3

Nero CoverDesigner Versions
Nero CoverDesigner is available in two different versions: Nero CoverDesigner and Nero
CoverDesigner Essentials.
Nero CoverDesigner Essentials does not offer the following features:




Creating and burning labels with LightScribe
Creating and burning labels with Labelflash

Nero CoverDesigner

Start Successfully

1.4

Working With Nero CoverDesigner
If you want to design a cover with Nero CoverDesigner, you must create a new document
first. If the document should contain a tracklist, directory, and/or fields, enter the document
data.
You can now design the document as desired. You can:






add cover elements if desired,
assign another template,
insert and edit objects such as text and pictures on the tabs, and
design the background.

Before the document is printed, you can set different printing options.
With a LightScribe recorder and Nero CoverDesigner, you can print labels directly on LightScribe media (see Printing LightScribe Labels 65).
With a Labelflash recorder and Nero CoverDesigner, you can print labels directly on Labelflash media (see Printing Labelflash Labels 67).
Creating and burning labels with LightScribe or Labelflash is only available in
the full version.
You can always upgrade your Essentials version at www.nero.com to get the
full version with all the functions.

See also:
 Adding a Cover Element 23
 Modifying the Template Later on 23
 Inserting And Editing a Background 29
 Print Window 56
 Printing LightScribe Label 65
 Printing Labelflash Label 67

Nero CoverDesigner

Starting The Program

Starting The Program
To start Nero CoverDesigner via Nero StartSmart, proceed as follows:

1. Click the StartSmart icon.
 The Nero StartSmart window opens.

2. Click the

button.

 The list of Nero applications appears.

Nero StartSmart window

3. Select the Nero CoverDesigner entry in the selection list.
 The Nero CoverDesigner window opens.
 You have launched Nero CoverDesigner via Nero StartSmart.

Nero CoverDesigner

Main Screen

Main Screen
The main screen is the starting point for all actions that can be performed using Nero CoverDesigner.
The screen consists of a menu bar, several toolbars, and a drawing area.

Nero CoverDesigner Main Screen

3.1

Menu Bar
The menu bar offers the following menus:
Menu
File

Menu
Edit

Menu
View

Opens the File menu, which provides file-related functions such as open,
save, and close. In addition, you can save files as templates, configure your
printer and paper stock, make program-specific settings, as well as import
and export information from and to Nero Digital files.
Opens the Edit menu, which provides editing functions such as cut, paste,
duplicate, and delete. In addition, you can copy properties, change the applied template, change the backgrounds of the cover elements as well as
add or delete cover elements as desired.
Opens the View menu, which allows you to hide and display screen and cover elements. In addition, you can display and use grid and guide lines as
well as display objects in the editable area only.

Nero CoverDesigner

Main Screen
Menu

Opens the Object menu, which you can use for editing the individual objects
of your drawing: You can insert objects, change their shape and position,
group objects, as well as open the Properties window where you can edit
the properties of objects. In addition, you can insert a background and set
default settings for objects.

Object

Opens the Data menu with the Document Data entry, which allows you to
enter document-specific data such as the disc name or track entries.

Data
Menu
Window
Menu

Opens the Window menu, which allows you to change the position and arrangement of multiple open documents on the main screen (drawing area).
All open documents can also be closed.

TWAIN

Opens the TWAIN menu, which allows you to scan pictures if a scanner is
attached.

Opens the Help menu, which offers information on different subjects.

Help

3.2

Toolbars
The following toolbars are available in Nero CoverDesigner:
Standard

Provides standard functions for the document and objects.

View

Allows you to zoom in or out of the drawing area. In addition, you can
select a paper stock for the current document.

Text

Allows you to format text. In addition, you can choose the font and size
of the text.

Modify Objects

Provides functions for modifying and editing objects.

Tools

Provides various tools which you can use for inserting or selecting objects in the drawing area.

3.2.1 Standard Toolbar
The following icons are available in the Standard toolbar:
Opens the New Document window where you can select the document type and
template for a new document.
Opens an existing Nero CoverDesigner document or a Nero CoverDesigner template.
Saves the current Nero CoverDesigner document.
Prints the current Nero CoverDesigner document.

Nero CoverDesigner

Main Screen
Opens the LightScribe Print Properties window, where you can configure the
printing options for LightScribe and print a LightScribe label.
This icon is only available if a LightScribe recorder is connected.
Cuts out a selected object and stores it on the clipboard.
Copies a selected object to the clipboard.
Deletes a selected object.
Applies the properties of one object to another.
Undoes the last editing step.
Restores an editing step that has been undone.
Opens the About Nero CoverDesigner window, where you can view the version
number, for example.
Opens the integrated online help.
Opens the Document Data window, where you can enter data such as the disc
title and tracks for the document.
Opens the Labelflash Print Properties window, where you can configure the printing options for Labelflash and print a Labelflash label.
This icon is only available if a Labelflash recorder is connected.
Creating and burning labels with LightScribe or Labelflash is only available in
the full version.
You can always upgrade your Essentials version at www.nero.com to get the
full version with all the functions.

3.2.2 View Toolbar
The following icons are available in the View toolbar:
Magnifies the current view of the drawing area.
Reduces the size of the current view of the drawing area.
Restores the standard view of the drawing area.
Magnifies a selected area of the drawing area.

Nero CoverDesigner

Main Screen

3.2.3 Text Toolbar
The following icons are available in the Text toolbar:
Changes the selected text to bold.
Changes the selected text to italics.
Underlines the selected text.

3.2.4 Modify Objects Toolbar
The following icons are available in the Modify Objects toolbar:
Opens the Properties window for a selected object.
Applies a margin color to the selected object.
Applies a fill color to the selected object.
Positions the selected object in front of all the others.
Moves the selected object behind all the others.
Moves the selected object one position towards the top.
Moves the selected object one position towards the back.
Groups multiple selected objects.
Ungroups objects.

See also:
 Properties And Background Properties Window 36

3.2.5 Tools Toolbar
The following icons are available in the Tool toolbar:
Activates the selection tool, used to select objects.
Activates the line tool, which you can use to insert a line.
Activates the rectangle tool, which you can use to insert a rectangle.

Nero CoverDesigner

Main Screen
Activates the ellipse tool, which you can use to insert an ellipse.
Activates the text tool, which you can use to insert a text graphic.
Activates the text box tool, which you can use to insert a text box.
Activates the track list tool, which you can use to insert a track list. A track list is a
list of audio files (tracks).
Activates the directory tool, which you can use to insert a folder. The folder refers
to data files.
Activates the image tool, which you can use to insert an image.
Activates the field tool, which you can use to insert different fields.

Track lists, directories, and fields are dynamic objects. The contents that are
entered in the document data are entered here. You can modify this data as
well. Dynamic objects are particularly useful for creating templates.

3.2.6 Align Toolbar
The following icons are available in the Align toolbar:
Aligns the object to the left margin.
Centers the object horizontally.
Aligns the object to the right margin.
Aligns the object to the top margin.
Centers the object vertically.
Aligns the object to the bottom margin.
Opens the Align elements window. Here you can align the object relative to another
object.
See also:
 Align Elements Window 50

Nero CoverDesigner

Main Screen

3.2.7 Floating Toolbar
When you select a dynamic object and leave the mouse over the object, a floating toolbar
appears after a brief interval.
The following icons are available in the floating toolbar:
Opens the Properties window.
Opens the Document Data window.

3.3

Drawing Area
The cover elements are designed in the drawing area. The drawing area consists of tabs for
the different cover elements that belong to the selected document type or that you have added to a user-defined type, as well as the rulers at the top and on the left.
You can use the tabs in the drawing area to switch between the individual cover elements. If
you want to view multiple cover elements at the same time, you can select the cover elements that should be visible from the View menu: The drawing area will then be divided into
subwindows.
On the tabs you will find:




an editable, unshaded area the size and shape of the selected cover element where the
cover element is designed, and
a shaded, non-editable area.
The gray line in the editable area is the edge of the cover element. The white
outer margin represents the bleed area, which you can configure on the Printing tab of the Application Preferences window (see Application Preferences
Window 70).

3.4

Objects
An object in Nero CoverDesigner is a design element that can be placed in the drawing area.
Objects can be inserted, duplicated, moved, their size, shape, and appearance modified, and
edited.
The following objects are available in Nero CoverDesigner:







Geometric objects: line, rectangle, ellipse
Artistic text
Text box
Picture
Dynamic objects: track list, directory, and fields

Nero CoverDesigner

Main Screen

3.5

Dynamic Objects
Track lists, directories, and fields are dynamic objects. These objects take the majority of
their contents from the document data. Therefore, you cannot enter text in the objects; you
must enter the contents in the document data instead.
The following dynamic objects are available:
Tracklist

The track list takes its contents from the document data that contains the
audio/chapter data for the tracks/chapters of an audio CD. Sample contents might be an automatically assigned sequential track number or information about the artist and/or title.

Directory

The directory takes its contents from the document data that contains the
files from the file system of a data CD. Sample contents might be an automatically assigned sequential number, the file path and/or file name.

Fields

Fields take their contents primarily from the document data, for example,
information about the title, artist, disc title, and/or release data. In addition, information about the save or print date and a user-defined text entry can be displayed as well.

See also:
 Document Data Window 31

Nero CoverDesigner

New Document Window

New Document Window
When you start Nero CoverDesigner, the New Document window is automatically opened
along with the main screen. This window is your starting point for creating a new document.
You can also open the window with the

icon on the toolbar in the main screen.

The New Document window consists of two selection lists, a preview window and setting
options.

New Document

The document types are displayed in the left selection list. Templates for the selected document type are displayed in the right selection list, and there are four tabs available:
Audio

For the Audio CD disc type

Data

For the data disc disc type

Audio and Data

For the audio and data disc type

Video

For the video disc type

The tabs contain templates for each disc type. The template can contain relevant fields like
the playing time, or a track list for audio CDs. The disc type is automatically correctly set in
the document data of a template. The cover elements can be displayed with the template
design in the preview window. The following setting options are available in the New Document window:
Discs

Sets the number of the Disk cover element in the document. Up to four
discs can be added to the document.

Nero CoverDesigner

New Document Window

4.1

Create new
template

Creates a template, i.e. the document is saved in *.nct format and appears in the templates list.

Creates a new document and closes the window.

Cancel

Cancels the procedure and closes the window.

Document Type
With Nero CoverDesigner, you can select different document types. Each document type
contains predefined cover elements that you can design.
The following cover elements are available:
Booklet

Insert in the interior of the CD or DVD case as a booklet or individual sheet. Visible from the front in CD cases made from clear
plastic. Normally it contains additional information about the disc,
such as the track titles for audio CDs.

Inlay

Insert in the back of the CD case. For DVD cases, a continuous
sheet that is inserted into the outer case of the DVD. The inlay is
visible from the outside.

Disc

Label in the form of a disc.

Mini disc
/(rectangular) Biz
Card

Label in mini disc / Biz Card / rectangular Biz Card form.

Biz Card Envelope

Envelope for Biz Card.

When you select a document type, predefined cover elements that you can design are automatically added to the document.
If you would like to choose the cover elements yourself, select the Custom document type. Here you can insert any cover element you wish into the current
document with the Edit > Insert New Page menu item.
The Full Template document type makes all the cover elements available.
Up to four discs can be added as cover elements to the Standard, DVD Case,
Multi Box, Maxi, Slim Pack and Custom document types by adding an additional disc to the document data (see Document Data Window 31).

4.2

Standard Document Type
The Standard document type corresponds to the customary jewel case for CDs. Jewel case
packaging is usually made from clear plastic. The front and the back are joined by a hinge.

Nero CoverDesigner

New Document Window
There is space for the booklet behind the front piece. The tray holds the CD inside. The tray
can be removed. There is room for the inlay under the tray.

The following elements can be designed with Nero CoverDesigner:
CD Booklet (Front)
CD Booklet (Rear)
Inlay
Disc

4.3

DVD Case Document Type
A DVD case is a type of packaging for DVDs. The packaging is larger than a normal CD case and has a fold in the middle. The booklet is placed inside. The inlay is inserted between
the plastic film and the exterior.

The following elements can be designed with Nero CoverDesigner:
DVD Booklet for the Interior
DVD Inlay for the Case
Disc

4.4

Multi Box Document Type
A multi box is a type of packaging for multiple CDs and can usually be opened on two sides.
The following elements can be designed with Nero CoverDesigner:
CD Booklet (Front)

Nero CoverDesigner

New Document Window
CD Booklet (Rear)
Front CD Inlay
Rear CD Inlay
Disk 1
Disk 2

4.5

Maxi Document Type
The maxi format was developed for single CDs, i.e., CDs that contain one track instead of an
entire album. A maxi case is thinner than a CD jewel case. Instead of a booklet, it includes a
sheet that has been folded twice on the right side so that it has a legible spine. The tray that
contains the CD is integrated in the case and cannot be removed.
The following elements can be designed with Nero CoverDesigner:
Maxi Inlay
Disc

4.6

Slim Pack Document Type
A slim pack is thinner than a maxi CD. It is used for single CDs and data discs created at
home. Instead of a booklet it includes a single sheet that is not folded.
The following elements can be designed with Nero CoverDesigner:
CD Booklet (Front)
CD Booklet (Rear)
Disc

4.7

Mini CD Document Type
A mini CD is a CD with a diameter of 8 cm. Most drives have a recess in the tray for mini
CDs.
The following element can be designed with Nero CoverDesigner:
Mini Inlay (Front)
Mini Inlay (Rear)
Mini-Disc

Nero CoverDesigner

New Document Window

4.8

Biz Card Document Type
The oval Biz Card is also known as a business card CD and is often used for advertising
purposes.
The following element can be designed with Nero CoverDesigner:
Biz Card

4.9

Rectangular Biz Card Document Type
The rectangular biz card has the same format as a standard business card.
The following element can be designed with Nero CoverDesigner:
Rectangular Biz Card

4.10 Biz Card Envelope Document Type
The biz card envelope is a cover for oval or rectangular biz cards.
The following element can be designed with Nero CoverDesigner:
Biz Card Envelope

4.11 LightScribe Document Type
If you have a LightScribe recorder, you can print the label side of a LightScribe CD/DVD with
Nero CoverDesigner. The label side of the disc has a special color or thermal layer which is
heated by the laser in the recorder so that pictures and text are printed.
This function is only available in the full version. You can always upgrade your
Essentials version at www.nero.com to get the full version with all the functions.
This function is only available in recorders that support LightScribe technology.

The following element can be designed with Nero CoverDesigner:
Disc

Nero CoverDesigner

Creating a New Document

Creating a New Document
There are three types of documents in Nero CoverDesigner. The distinguishing feature is
how the background of the cover elements is created:

5.1

Standard Document

The background is created by the user as desired or taken
from the template.

Picture Document

A selected picture is used for the background of all cover
elements.

Nero Digital Document

The cover art saved in the Nero Digital file is used for the
background of all cover elements.

Creating a Nero Digital Document
With Nero CoverDesigner, an album cover that has been stored in a Nero Digital file can be
extracted and then used as the basis for a Nero CoverDesigner document.
To create a Nero Digital document, proceed as follows:

1. Click the File > New Cover from Nero Digital menu.
 The Open window is opened.

2. Select a Nero Digital file that contains a cover and then click the Open button.
 The New Document window is opened; the Custom document type is selected.

3. If you want to design a cover for Nero Digital audio, click the Audio tab.
If you want to design a cover for Nero Digital video, click the Video tab.

4. Select the Nero Digital Cover template.
5. Click the OK button.
 The New Document window is closed. In the drawing area, the cover elements that were stored in the Nero Digital file are displayed. The cover is used as the background picture.

 You have created a new Nero Digital document and can now finish the design.
See also:
 Designing The Cover Element 25

5.2

Creating a New Document or Image Document
To create a new document or picture document, proceed as follows:

1. If you want to create a new document, click the

icon in the toolbar.

 The New Document window is opened.

Nero CoverDesigner

Creating a New Document

2. If you want to create a new picture document:
1. Click the File > New Cover from Picture menu.


The Open window is opened.

2. Select the desired image file and then click the Open button.


The New Document window is opened.

3. Select a document type from the left selection list.
 The right selection list displays the templates for the selected document type; the Audio
tab is selected by default.

4. Click one of the tabs in the right selection list to select a disc type.
 The selection list displays the templates for the selected document and disc type.

5. Select an already designed template or the Empty Document template from the selection
list on the right.

 The selected template is displayed in the preview area.

6. If applicable, enter the number of discs that the document should contain.
You can increase the number of discs in the document afterwards by adding a
disc to the document data.

7. Click the OK button.
 The New Document window is closed. If you selected a template that contains dynamic
objects, the Document Data window is opened.

8. If the Document Data was opened, enter the document data, and then click the OK button.
 The document data is applied and the Document Data window is closed. In the drawing
area, the cover elements of the selected document type are displayed on tabs. If you have created a picture document, the selected picture is inserted as the background picture
of all the cover elements.

 You have created a new document and can now finish the design.
See also:
 Document Type 17
 Designing The Cover Element 25

Nero CoverDesigner

Editing a Document

6.1

Adding a Cover Element
If you selected the Custom document type, only the cover element for the disc label is initially available on the Disk 1 tab. You can add new cover elements to the document, however.
Proceed as follows:

1. Click the Edit > Insert New Page menu in the main screen.
 The Insert Page window is opened.

2. Select the cover element that you want to add to the current document.
3. Click the Insert button.
 The window is closed. The corresponding tab with the new cover element is added to the
document.
Deleting Cover Elements
You can remove cover elements with the Edit > Remove Current Page menu
item. A document must contain at least one cover element, however.

6.2

Modifying the Template Later on
You can later modify the template used for a document in order to select another design.
The document data of the original document remains intact but not necessarily
all the inserted objects. Inserted objects are only retained if you select a template with the same document and disc type.
To modify a template, proceed as follows:

1. Click the Edit > Change Template menu in the main screen.
 The Choose New Template window is opened.

2. Select a new template from the right selection list.
 The Choose New Template window is closed.
 The document appears with the design of the selected template.

Nero CoverDesigner

Editing a Document

6.3

Assigning a Paper Stock
You can assign a paper stock to every cover element. The dimensions of the cover element
may change when you do so. Assigning a paper stock usually means that you want to print
on special stock, from a particular manufacturer, for example.
Changing the Size of Cover Elements
If you change the size of a cover element, objects may end up outside the
drawing area: Objects are positioned absolutely in relation to the ruler, i.e., the
page dimensions, and not relative to the cover element itself.
To assign a paper stock to a cover element, proceed as follows:

1. Click the tab that contains the desired cover element.
 The cover element is displayed.

2. Click the drop-down menu in the View toolbar.
 The drop-down menu is opened.

3. Select a paper stock.
 The drop-down menu is closed and the selected paper stock is assigned to the cover
element. The size, dimensions, and/or position of the cover element may change.

Nero CoverDesigner

Designing The Cover Element

7.1

Inserting an Object
In Nero CoverDesigner, you can insert objects in order to design cover elements for a document. An inserted object is automatically selected and can be edited.
To design a cover element, you can insert objects in the drawing area. Proceed as follows:

1. To insert a line:
1. Click the


icon on the toolbar.

The cursor changes to a crosshair with a line symbol.

2. Click in the drawing area and drag the cursor.


The line is inserted.

2. To insert a rectangle:
1. Click the


icon on the toolbar.

The cursor changes to a crosshair with a rectangle symbol.

2. Click in the drawing area and drag the cursor.


The rectangle is inserted.

3. To insert an ellipse:
1. Click the


icon on the toolbar.

The cursor changes to a crosshair with an ellipse symbol.

2. Click in the drawing area and drag the cursor.


The ellipse is inserted.

4. To insert artistic text:
1. Click the


icon on the toolbar.

The cursor changes to a crosshair with an A.

2. Click in the drawing area.


A vertical line is inserted.

3. Enter the text directly in the drawing area.
4. Press the Enter key.
You cannot enter artistic text with a line break. To enter longer text with line
breaks, use the Text Box object.

5. To insert a text box:
1. Click the


icon on the toolbar.

The cursor changes to a crosshair with "Abc".

Nero CoverDesigner

Designing The Cover Element
2. Click in the drawing area and drag the cursor.


The Properties window is opened at the Text Box tab.

3. Enter the text in the input area.
4. Specify the text options.
5. Click the OK button.


The text box is inserted with the text that you entered.

6. To insert a track list or a folder:
1. Click the


icon on the toolbar.

The cursor changes to a crosshair with a track list or folder symbol.

2. Click in the drawing area and drag the cursor.


The track list or folder is inserted. If you have completed the document data, the corresponding contents are displayed.

7. To insert a picture:
1. Click the


icon on the toolbar.

The Open browser window is opened.

2. Select an image file and then click on the Open button.


The Open window is closed. The mouse pointer changes to a crosshair with a camera symbol, and the frame of the selected image is displayed around the pointer.

3. Click in the drawing area.


The selected image is inserted.

8. To insert a field:
1. Click the


icon on the toolbar.

The extended dialog box is opened and displays the field types.

2. Select a field type.


The cursor changes to a crosshair and an outline of the selected field is displayed in
the background.

3. Click in the drawing area.


The field is inserted. If you have entered something into the document data, the corresponding content is displayed. If the document data is empty, the field type name is
displayed in angled brackets.

 You have successfully inserted an object. Now you can edit it and continue designing the
cover. The inserted object is automatically selected and displays a frame with the anchor
points of the frame and a rotation arrow.

7.2

Editing an Object
You can edit an inserted object with Nero CoverDesigner. You can modify the size, shape,
position, and, if desired, color.

Nero CoverDesigner

Designing The Cover Element
In order to change the size, shape, or position of an object, proceed as follows:

1. Click the

icon (selection tool) on the toolbar.

2. Select the object that you want to edit.
 A frame with anchor points and a rotation arrow are displayed around the object.

3. To change the position, size, and/or rotation of an object precisely:
1. Click the Object > Geometry menu.


The Geometry window is opened.

2. Enter the desired position, size, and angle of rotation.
3. Click the OK button.


The window is closed and the object is modified to match your new entries.

4. To align an object precisely in the drawing area:
1. Click the Object > Align menu.


The Align Elements window is opened.

2. Set the desired options.
3. Click the OK button.


The window is closed and the object is positioned according to your new entries.

5. To change the position of an object manually, hold down the mouse button and move the
object.

6. To change the position of the midpoint of a bent text:
1. Click on the midpoint.


The mouse pointer changes to a crosshair.

2. Move the midpoint while holding down the mouse button.


The position of the midpoint is modified.

7. To change the size or shape of an object manually:
1. Move the mouse pointer over an anchor point on the frame.


The mouse pointer changes to a double arrow that shows you which direction you
can pull the object in.

2. Click the anchor point and pull it in the desired direction.


The object becomes larger or smaller.

8. To change the rotation of an object manually:
1. Move the mouse pointer over the rotation arrow of the frame.


The mouse pointer changes to a rotation arrow.

Nero CoverDesigner

Designing The Cover Element
2. Click the rotation arrow and rotate the object in the desired direction.


The rotation of the object is changed.

9. To change properties such as the pen, brush, font, etc.:
1. Click the


icon.

The Properties window is opened. The tabs that are visible in the window are a factor of the currently selected object.

2. Specify the properties in the tabs.
3. Click the OK button.


The window is closed and the object is modified to match your new entries.

10. To change the contents of artistic text:
1. Click the


icon on the toolbar.

The cursor changes to a crosshair with an A.

2. Click on the artistic text and change the content as desired.
3. Press the Enter key.

 You have edited the object.

7.3

Converting Artistic Text
With Nero CoverDesigner, you can convert artistic text to a graphic element. The text properties can no longer be edited after the conversion.
To convert artistic text, proceed as follows:

1. Click the

icon (selection tool) on the toolbar.

2. Select the artistic text that you want to convert.
 A frame with anchor points and a rotation arrow are displayed around the text.

3. Select Convert to Curves in the context menu.
 A window that informs you that the text will be converted to a graphic element and that
you will no longer be able to edit the text properties appears.

4. Click the OK button.
 The dialog window is closed, and the artistic text is converted.
 You have successfully converted artistic text to a graphic element. The Pen and Brush
tabs are available in the Properties window.

7.4

Applying Image Effects
In Nero CoverDesigner, you can apply a wide range of effects to images.
Proceed as follows:

1. Click the

icon (selection tool) on the toolbar.

Nero CoverDesigner

Designing The Cover Element

2. Select the image that you want to edit.
 A frame with anchor points and a rotation arrow are displayed around the text.

3. Click the

icon.

 The Properties window is opened.

4. Click the Effects button.
 A menu is displayed.

5. Choose the desired effect.
 A corresponding window containing before and after views opens.
For some effects, no window opens; the effect is applied immediately instead,
such as with the Negative effect.

6. Select the desired value with the slider.
7. Click the OK button.
 The window is closed. The image area displays the current view of the picture.

8. Add additional effects if you wish.
9. Click the OK button.
 The Properties window is closed. The image in the drawing area is modified to match
your new entries.
If you are not satisfied with the effect(s), you can undo your last action(s) with
the icon

on the toolbar.

The number of actions that you can undo depends on the value that was entered in the program settings. You can change this value in the Application
Preferences window (see Application Preferences Window 70).
See also:
 Image Effects 42

7.5

Inserting And Editing a Background
With Nero CoverDesigner, you can insert and edit a background. You can insert or edit the
backgrounds for all the cover elements of a document at the same time or insert or edit the
background of a cover element separately.
To insert a background and edit its properties, proceed as follows:

1. If you want to insert or edit the background for the current cover element, click the Object >
Background Properties menu.
If you want to insert or edit the background for all cover elements, click the Edit > Change
All Backgrounds menu.

 The Background Properties window is opened.

Nero CoverDesigner

Designing The Cover Element

2. If you want to create a colored background:
1. Click the Brush tab.
2. Select a color and a style, if desired.

3. If you want to insert a background image:
1. Click the Image tab.
2. Select an picture file in the Picture Source area.


The image is displayed in the Image preview area. The Stretch Mode area is active.

3. In the Stretch Mode area, specify how the background image is scaled.
4. Apply any desired effects to the picture.

4. Click the OK button.
 The background is displayed according to your settings.
See also:
 Image Tab 41
 Image Effects 42

Nero CoverDesigner

Document Data Window

Document Data Window
You can view and/or enter document data in the Document Data window. Document data
determines contents of the dynamic objects track list, directory, and fields that can be applied when designing a cover or label. You can enter the contents, name, etc., of the disc for
which you want to create a cover or label.
When you launch from another Nero application, the document data is automatically filled in with the information from the disc, if possible.
You can import data from a Nero Digital file into the document data by selecting
File > Import from Nero Digital.
By default, the document data contains at least the Document, Disk 1 and a data type. You
can add additional entries yourself.
You can open the window by clicking the Data > Document Data menu.

Document data

The window consists of two areas: In the area on the left, the document data elements are
displayed in a tree structure; in the area on the right, the input options for the currently selected element are displayed.
The tree structure of the document data can have up to four levels and represents the project or disc structure. You can enter information which can then be used by the dynamic objects on each level.
The top, or first level always contains the Document element, which refers to the entire project.

Nero CoverDesigner

Document Data Window
The next level, the second one, indicates the discs that are contained in the project. You can
add up to four discs to the Document element. You can specify a disc type for each disc;
this entry affects the third and fourth levels. There are four disc types you can choose from:






Audio for the Audio CD disc type
Data for data discs
Audio + Data for the audio and data disc type
Video for video discs

By default, the disc type that you selected when you created the document in the New Document window is used for the discs.
The third level contains the data type or types that that are contained on the disc of the selected type. An Audio CD, for example, contains audio files – in other words, the data type
Audio/Chapter Data. A data disc contains pure data – in other words, the data type File
System.
The fourth level contains the contents of the disc under its corresponding data type. Audio
files (tracks), for example, are listed under Audio/Chapter Data, and data files under the
File System data type.

8.1

Document
For the Document element, the following input options are available in the Document area
on the right:
Title

Specifies the title of the document. By default, the document title is applied to the Subtitle input field for the disc
as well.
This information is used for the Title field type.

Year of release

Specifies the release year.
This information is used for the Year field type.

Artist/Publisher

Specifies the artist or publisher.
This information is used for the Artist field type.

Apply to all subitems

Applies the artist or publisher entry to the corresponding
input fields Artist/Publisher for the Disc and Artist for
the Tracks.

Add Disc

Adds a disc to the document data. Up to four discs can
be added. The corresponding tabs from Disc 1 to Disc 4
with the new cover element for the disc label are added
to the document.

Nero CoverDesigner

Document Data Window

8.2

Disc
For the Disc element, the following input options are available in the Disc area on the right:
Subtitles

Specifies the title of the disc. By default, the document
title is applied to the input field.
This information is used for the Disc Title field type.

Type

Specifies the disc type. Four types are available: Audio,
Data, Audio + Data and Video. Depending on the selected disc type, the disc will contain different data types
on the next level.
This information is used for the Disc Type field.

Artist/Publisher

Specifies the artist or publisher of the disc.
This information is used for the Disc Artist field type.

8.3

Apply to all subitems

Applies the artist or publisher entry to the Artist input
field for the tracks.

Erase

Deletes the disc from the document data and its corresponding tab from the document.

Import Data

Opens the Read An Import File window, which you can
use to select a CDC file.

Audio/Chapter Data
Audio/Chapter Data appears as an entry for the Audio, Audio + Data, and Video disc types. Information about the track number and total playing time is displayed in the Audio/Chapter Data area on the right.
The following buttons are available:

8.4

Add Track

Adds a track entry to the data.

Delete All

Deletes all tracks from the data.

File System
File System appears as an entry for the Data, Audio + Data, and Video disc types. Information about the number of entries and the total size is displayed in the File System area on
the right.
The following buttons are available:
Add Files

Opens the Select the Files You Want to Add to the
Disc window so that you can select a file. A new entry is
added to the data and the file information is applied.

Nero CoverDesigner

Document Data Window

8.5

Delete All

Deletes all file entries from the data.

Adding folders

Opens the Browse for Folder window in which a folder
can be selected. The folder is added to the data as a file
entry.

Video/Picture Data
Video/Picture Data appears as an entry for the Video disc type. The number of pictures is
displayed in the Video / Screen Shot Data area on the right.
The following buttons are available:
Adding a Picture

Displays the Open window so that you can select an image. A new entry is added to the data and the file information is automatically applied;
the image is stored in the Nero CoverDesigner document.

Delete All

Deletes all file entries from the data.

Adding an Entry
When you add an entry to the data, the information from the entry is applied to
the document data, and the data structure is expanded accordingly.
Adding a Picture
If you add a picture, the picture is stored in the document as well. Tracks, folders, and data files are not stored in the document.

8.6

Data Entry
8.6.1 Track/Chapter
For the Track/Chapter data entry, the following input options are available in the Audio
Track area on the right:
Title

Specifies the title of the track.

Artist

Specifies the artist of the track.

Playing
Time

Specifies the playing time of the track.

Extended
Info

Provides additional information about the track.

Erase

Deletes the track entry.

Nero CoverDesigner

Document Data Window

8.6.2 File Information
For the File Information data entry, the size and path of the file are displayed in the Audio
Track area on the right.
The following input options are available:
Title

Specifies the title of the file.

Erase

Deletes the file entry.

8.6.3 Picture
For the Picture File data entry, the following input options are available in the area on the
right:
Title

Specifies the title of the picture.

Erase

Deletes the picture entry.

Nero CoverDesigner

Properties And Background Properties Window

Properties And Background Properties Window
The Properties or Background Properties window offers numerous configuration options
for objects and the background. Different tabs are available depending on the currently selected object.
The Properties window for a selected object can be opened with the

icon. You can edit

the object by modifying the configuration options in the window.
The Background Properties window can be opened for all backgrounds by selecting Edit >
Change All Backgrounds or for the background of the current cover element by selecting
Object > Background Properties from the menu. You can insert and edit the background
with the setting options.
The following tabs are available:
Pen

Specifies whether the object has an outline. You can set the width and color
as well.
This tab is available for all objects.

Brush

Specifies whether or not the object is filled and with what color. You can set
the style and color as well.
This tab is available for the rectangle, ellipse, artistic text, text box, track list,
directory, and field objects as well as the background.

Text

Determines the content and options for the text.
This tab is available for the text and field objects.

Font

Determines the font, style, and size of the text. In addition, you can choose
whether the text should be displayed in strikeout, underline and/or small
caps. A preview window displays your changes.
This tab is available for the text and field objects.

Text box

Allows you to enter and format text.
The tab is available for the text box object.

Bend

Bends the object.
This tab is available for the text box, track list, and directory objects.

Image

Allows you to select and edit a picture.
This tab is available for the picture, text box, track list, and folder objects as
well as the background.

Import
Image

Provides import functions for pictures. This feature is particularly useful for
creating templates.
For example, here you can determine whether a preview picture is automatically displayed when you start Nero CoverDesigner by way of Nero
Burning ROM and have created a compilation with the Audio Book CD disc
format there.
This tab is available for the image object.

Nero CoverDesigner

Properties And Background Properties Window
Import
Text

9.1

Allows you to import a comment.
This feature is particularly useful for creating templates for Audio Book CDs.
This function is only performed when you start Nero CoverDesigner from
Nero Burning ROM and have created a compilation with the Audio Book
CD disc format.
This tab is available for the text box object.

Tracks

Provides options for the contents and appearance of the track list.

See also:
 Brush Tab 38

9.10 Field Tab
The Field tab provides setting options for fields. Fields take their content from the document
data for the most part. The Field tab consists of the Field Type selection list, the Options
area, and a check box.
All of the field types are listed in the Field Type selection list. The Options area refers to the
selected field type. Not all setting options are available for each field type.
The following setting options are generally available:
Field type

Specifies the field type. The following field types are available:
Title, Artist, Disc Type, Year, Disc Title, Disc Artist, Tracks, Total Playing
Time, Total Size, Last Save Date, Print Date,and Custom Text.

Nero CoverDesigner

Properties And Background Properties Window
Check box
Fixed Size

Specifies that the text has a fixed height, even if the size of the frame is
modified. The text height is based on the font size that is specified on
the Font tab.
If the check box is not selected, the text size is adjusted to match the
frame size and vice versa.
This feature is not available for bent text.

The following configuration options are available in the Options area:
Drop-down menu

Specifies the alignment of the selected field type in the frame.

Alignment
Drop-down menu

Specifies which disc the selected field type refers to.

Disc
Drop-down menu

Specifies the format for the playing time.

Time Format
Drop-down menu

Specifies the format for the file size.

Size Format
Drop-down menu

Specifies the format for the date.

Date Format
Input text

Specifies the text for the Custom Text field type.

Custom Text
Input text

Specifies the text that appears in front of the selected field type.

Leading Text
Input text

Specifies the text that should appear after the selected field type.

Trailing Text
The field type that you select in the Field Type selection list is applied to the inserted field even if you assigned a different field type beforehand.

Nero CoverDesigner

Geometry Window

Geometry Window
The position, size, and rotation of an object are determined in the Geometry window. You
can open the window by clicking the Object > Geometry menu.

Geometry window

The following input fields are available in the Position area:
X

Specifies the X coordinate of the top left point of the frame.

Specifies the Y coordinate of the top left point of the frame.

The following input fields are available in the Size area:
Width

Specifies the width of the object in millimeters.

Height

Specifies the height of the object in millimeters.

The following input field is available in the Rotation area:
Angle

Specifies the angle of rotation.

10.1 Geometry Window For Bent Objects
For bent objects, the position of the center and the position of the object in terms of the center are specified in the Geometry window. You can open the window by clicking the Object
> Geometry menu.

Nero CoverDesigner

Geometry Window

Geometry window for bent objects

The following input fields are available in the Center area:
X

Specifies the X coordinate of the center point (which the object is rotated
around).

Specifies the Y coordinate of the center point (which the object is rotated
around).

The following input fields are available in the Rotation area:
Start

Specifies the position of the text in relation to the center point. The starting
point of the text is the left edge of the first character. The division into degrees
is the one commonly used in mathematics: 0 degrees is on the right at the
height of the midpoint and the units progress in a counterclockwise direction.

Arc

Specifies the arc to apply to the text. Selecting 180 degress, for example,
bends the text in a semicircle.

Nero CoverDesigner

Align Elements Window

Align Elements Window
The Align Elements window aligns objects relative to the page, i.e., the editable drawing
area, or another object. You can open the window by clicking the Object > Align menu.
This feature is not available for bent objects.

Align Elements window

This window contains the following check boxes and option buttons:
Check box
Horizontal alignment

Specifies the horizontal alignment. There are three option buttons:
Left: Aligns the object along the left edge.
Center: Centers the object.
Right: Aligns the object along the right edge.

Check box
Vertical alignment

Specifies the vertical alignment. There are three option
buttons:
Top: Aligns the object along the top edge.
Center: Centers the object.
Bottom: Aligns the object along the bottom edge.

Option button
Last Selected Element

Aligns the object with another. In order to use this feature, two objects must be selected; the object that was
selected last will be aligned in relation to the first.
This feature is useful for positioning two objects on top
of one another, e.g., text on a picture.

Option button

Aligns the object to the page, i.e., to the editable area.

Page

Nero CoverDesigner

Design Tools

12.1 Grid
A grid can be used to position objects. In Nero CoverDesigner, the grid is displayed as a series of dots with equal horizontal and vertical spacing.
The following options are available in the View menu of Nero CoverDesigner:
Show Grid

Displays the grid.

Snap to Grid

Snaps objects to the grid. Objects are snapped to the
grid points when they are moved or drawn near them.

Grid Setup

Displays the Grid Setup window where you can specify
the horizontal and vertical spacing of the grid points.

12.2 Guidelines
Guidelines are lines that can be used to help position objects. In Nero CoverDesigner, guidelines are displayed as dashed blue lines.
The following options are available in the View menu of Nero CoverDesigner:
Entry

Displays the guidelines.

Show Guidelines
Entry
Snap to Guidelines
Entry
Set Up Guidelines

Aligns objects along the guidelines. Objects are snapped
to the guidelines when they are moved or drawn near
them.
Opens the Set Up Guidelines window, where you can
create horizontal and/or vertical guidelines.

Creating Guidelines Manually
You can create guidelines manually by clicking on the horizontal or vertical ruler
and dragging a guideline onto the drawing area.

Nero CoverDesigner

Creating And Editing a Template

13.1 Creating a Template
With Nero CoverDesigner, you can create your own templates.
To do this, proceed as follows:
Document data is not saved when the document is saved as a template.

1. Click the

icon on the toolbar.

 The New Document window is opened.

2. Select the document type and an empty or predesigned template.
3. Select the Create New Template check box.
4. Click the OK button.
 The New Document window is closed and the predefined cover elements for the selected document type are displayed in the drawing area.
If you selected the Custom document type, you can add new cover elements
by selecting Edit > Insert New Page from the menu.

5. Design the document as desired.
6. To save the template as a compressed file, select File > Quick Save from the menu.
To save the template without compression, select File > Save from the menu.

 If you attempt to save a template with pictures that total more than 5 MB without compression, a window is opened asking whether you want to save the file with or without
compression.
The Save As window is then opened.
Saving the template in compressed form may be a good idea if it contains a large number of pictures. The size of the template file will be smaller. Compression can reduce the picture quality in some cases, however.

7. If the My Documents folder is displayed, select the Nero CoverDesigner Templates folder
from the Save In drop-down menu.

8. Enter a file name and click the Save button.
Even if you did not select the Create New Template check box at the beginning, you can still create a template. In this case, simply select Save as Template from the File menu. Make certain that you save the template file in the
Nero CoverDesigner Templates folder so that it appears in the template list.

Nero CoverDesigner

Creating And Editing a Template

 The template file is saved under the selected name. It will now be available in the template list of the New Document window under the document and disc type that you selected when you created it or whose cover elements were contained in the template file.

13.2 Modifying a Template
You can modify templates in Nero CoverDesigner.
Proceed as follows:

1. Click the File > Open menu.
 A browser window is opened.

2. Select the desired Nero CoverDesigner template file (*.nct) from the Nero CoverDesigner
Templates folder and then click the Open button.

 The browser window is closed. A window asking if you want to edit the template is opened.

3. Click the Yes button.
 The template document is opened.

4. Edit the document as desired.
5. Click the

button.

 The changes are saved in the template. You can now close the template and use it to
create a new document.

Nero CoverDesigner

Saving a Document

Saving a Document
You can save a document that you have created in Nero CoverDesigner.This saves all of the
document's cover elements and any document data that you have entered. You can save
the document in compressed or uncompressed form. Compressing a document primarily
compresses the pictures in the document.
Saving Compressed Documents
Saving the document in compressed form may be a good idea if it contains many pictures. The size of the document file will be smaller. Compression can reduce the picture quality in some cases, however.
To save a document, proceed as follows:

1. To save the document as a compressed file, select File > Save Compressed from the menu. To save the document without compression, select File > Save from the menu.

 If you attempt to save a document containing pictures that total more than 5 MB without
compression, a window opens, asking whether you want to save the file with or without
compression. The Save As window then opens.

2. Enter the file name and path to save the file under.
3. Click the Save button.
 The Save As window is closed and the document is saved.

Nero CoverDesigner

Storing a Cover in a Nero Digital File

Storing a Cover in a Nero Digital File
With Nero CoverDesigner, you can save an album cover in a Nero Digital file. Nero Digital is
an MPEG-4 storage format for audio and video files that can contain additional information. It
was developed by Nero AG. The designed cover element is stored in the file as cover art.
This means that an image of your final cover element design is created and saved as a
background image.
Any existing cover elements of the same type (e.g., a booklet) in the Nero Digital file are overwritten. We recommend that you create a Nero Digital document
beforehand (see Creating a Nero Digital Document 21), to see whether any
cover art has been stored in the Nero Digital file already.
The following requirement must be fulfilled:
 You have created a document complete with designed cover elements.
To save a cover in a Nero Digital file, proceed as follows:

1. Click the File > Export to Nero Digital menu.
 The Save As window is opened.

2. Select the Nero Digital file that you want to save the cover in.
3. Click the Save button.
 The cover elements are saved in the Nero Digital file. You can now use the Nero Digital
file to create a Nero Digital document that contains the stored cover elements.
See also:
 Creating a Nero Digital Document 21

Nero CoverDesigner

Printing the Document

Printing the Document
The following requirement must be fulfilled:
 You have already opened a document.
To print a document or part of it, proceed as follows:

1. Click the File > Print menu.
 The Print window is opened.

2. Select a printer on the General tab.
3. Select the desired options on the Properties tab.
4. Select the cover elements that should be printed on the Elements tab.
5. If you have assigned different paper stocks to the cover elements, check below the preview
area to see in which order the paper stock will be printed. Insert the paper/media in the printer in the correct order.

6. Click the OK button.
 The document or selected cover elements are printed.

16.1 Print Window
You set the print options for the document in the Print window prior to printing.
The window consists of three tabs:
General

Allows you to select a printer.

Properties

Provides setting options for printing paper borders and crop marks as
well as for bleeding.

Elements

Selects the cover elements for printing.

Nero CoverDesigner

Printing the Document

16.1.1 Properties Tab
The Properties tab contains three areas: Print Borders, Print Crop Marks, and Miscellaneous.

Print window, Properties tab

The following configuration options are available in the Print Borders area:
Option button

Prints borders for all paper stocks.

On all paper stocks
Option button

Prints borders on normal paper stock only.

On normal paper only
Option button

Never prints paper borders.

Never
The following configuration options are available in the Print Crop Marks area:
Option button

Prints crop marks for all paper stocks.

On all paper stocks

Nero CoverDesigner

Printing the Document
Option button

Prints crop marks on normal paper stock only.

On normal paper only
Option button

Never prints crop marks.

Never
The following configuration options are available in the Miscellaneous area:
Check box/
Input field

Enables bleeding and specifies how far beyond the edge of the
cover element printing will occur

Enable Bleeding
Check box

Specifies that printing must be confirmed for each new page.

Prompt at each new
page
Input field

Specifies how many times the document should be printed.

Copies
Button

Opens the Print Preview window.

Preview

16.1.2 Elements Tab
The Elements tab contains a selection list, a preview area, and configuration options. You
can select the cover elements to print in the selection list.
The preview area shows how the cover elements that are to be printed will appear on the
page. The paper stock that the currently displayed cover elements will be printed on is displayed below the preview area. Cover elements that will be printed are displayed in blue cover elements that will not be printed are displayed in gray.

Nero CoverDesigner

Printing the Document

Print window, Elements tab

The following configuration options are available on the Elements tab:
Input field
Copies of the Element
Check box
Print on normal paper

Specifies how many times the selected cover element
should be printed.
Prints the selected cover element on normal paper.
This check box is only available if the normal paper stock
has not been assigned to the cover element.

Nero CoverDesigner

Print Settings And Paper Stocks

17.1 Printer Calibration
With Nero CoverDesigner, you can calibrate your printer to ensure precise print alignments.
We recommend that you calibrate your printer once after you have selected the paper stock
and printer.
To calibrate you printer, proceed as follows:

1. Prior to calibration, select the desired paper stock and the printer.
2. Click the File > Preferences menu.
 The Application Preferences window is opened.

3. Click the Printing tab.
4. Click the Print Calibration Sheet button.
 The calibration sheet is printed.

5. Fold the calibration sheet in the middle horizontally and vertically.
6. Unfold the calibration sheet and read the values at which both fold lines cross the axis.
7. If the fold lines do not cross in the middle of the axis, enter the horizontal and vertical values
from the calibration page in the Horizontal/Vertical settings fields on the Printing tab.

8. Repeat steps 4 to 6 to check the new entries. If the fold lines cross in the middle of the axis,
proceed to the next step. Otherwise repeat the previous step.

9. Click the OK button.
 The Application Preferences window is closed. The calibration settings are saved, and
your printer is now calibrated.

17.2 Paper Stocks Window
In the Paper Stocks window you can view predefined paper stocks or create your own custom ones. You can open the window by clicking the File > Paper Stocks menu.
User-defined paper stocks are useful for modifying the size and depiction of a cover element.
Predefined paper stocks have been set to match the manufacturer's specifications for labels
and papers. For example, some special papers can require a specific placement and position of the cover element. Or labels may have different sizes.
You can select the paper stocks that are listed here or that you create in the main screen
area and assign them to the current cover element.
The window consists of three areas. User-defined and predefined paper stocks are displayed
in a selection list in the area on the left. Each paper stock can contain one or more labels.
These labels correspond to the cover elements in Nero CoverDesigner.
Setting options for the user-defined paper stocks are displayed in the middle area. These
setting options are grayed out for the predefined paper stocks.
The size and position of the cover elements are displayed in the preview area on the right.

Nero CoverDesigner

Print Settings And Paper Stocks

Paper Stocks window

The following configuration options are available in the User-defined Paper Stock entry:
Add Stock

Adds a new paper stock.

Importing

Imports a definition file for paper stock in DAT format.
New paper stocks are added to the user-defined paper
stocks.

Exporting

Exports a definition file for paper stock in DAT format. All
user-defined paper stocks are exported.

The following configuration options are available in the paper stock entry:
Name

Specifies the name of the paper stock.

Width/Height

Specifies the width and height.

Portrait

Specifies that the paper is printed in portrait mode.

Landscape

Specifies that the paper is printed in landscape mode.

Add Item

Displays a selection list that you can use to select a cover element.
The selected cover element is added to the paper stock.

Delete Stock

Deletes the current paper stock.

The following configuration options are available in the item / cover element entry:
Width/Height

Specifies the width and height.

Nero CoverDesigner

Print Settings And Paper Stocks
Spine Width

Specifies the width of the spine, i.e., the middle part of
the inlay.
The input field is available for the DVD inlay, CD inlay,
maxi booklet, and mini CD inlay (front and rear covers).

Rear Width

Specifies the width of the rear portion, i.e., the part that is
folded around.
This field is available for the maxi booklet and mini CD
inlay (back) cover elements.

Indentation Radius

Specifies the radius of the flap. This field is available for
the Biz Card envelope cover element.

Fold Width

Specifies the width of the folded seam.
This field is available for the business card envelope cover element.

Radius of Outer Boundary

Specifies the outer radius and therefore the size of the
printable area (disc edge).
This field is available for the business card cover element.

Center Hole Radius

Specifies the inner radius and therefore the size of the
unprintable area.
This input field is available for the Biz Card and rectangular Biz Card cover elements.

Bounding Rectangle

Specifies the size of the rectangle and therefore the oval
form of the business card.
This input field is available for the Biz Card cover element.

Rounded Corners (X/Y)

Specifies the radius of the rounded corners on the disc.
This field is available for the rectangular business card
cover element.

Outer Radius

Specifies the outer radius and therefore the size of the
printable area (disc edge).
This field is available for the disc and mini CD cover elements.

Inner Radius

Specifies the inner radius and therefore the size of the
unprintable area (disc hole).
This field is available for the disc and mini CD cover elements.

Position X/Y

Specifies the postion of the cover element on the paper
that was defined in the paper stock profile.

Nero CoverDesigner

Print Settings And Paper Stocks

17.3 Creating a Paper Stock Profile
With Nero CoverDesigner, you can create your own custom paper stocks. User-defined paper stocks are available in the main screen area for cover elements that have been added as
labels to the paper stock.
The creation of user-defined paper stocks is useful for designing covers and labels whose dimensions vary from standard measurements.
To create a paper stock, proceed as follows:

1. Click the File > Paper Stocks menu.
 The Paper Stocks window is opened.

2. Select the User-defined Stocks entry in the selection list.
3. Click the Add Stock button in the Paper Stocks area.
 A Stock 1 subentry is added to the User-defined Stocks entry.

4. Select the Stock 1 subentry.
 The Paper Stock area is displayed.

5. Enter the name and dimensions of the paper stock in the Paper Stock area.
6. Click the Add Item button.
 A selection list of cover elements is displayed.

7. Select the cover element that you want to add to the paper stock.
 The selected cover element is added to the paper stock.

8. Select the inserted cover element.
9. Specify the desired dimensions such as the height/width and position of the cover element
on the paper in the area in the middle.

10. Repeat the four previous steps for each cover element that you want to add to the paper
stock.

11. Click the OK button.
 The Paper Stocks window is closed.
 The paper stock is saved and is now available for the selected cover elements in the
drop-down menu of the View toolbar.
See also:
 Application Preferences Window 70
 Paper Stocks Window 60

Nero CoverDesigner

Print Settings And Paper Stocks

17.4 Default Paper Stock Settings
On the Paper Stocks tab in the Application Preferences window, you can set the default
settings for paper stocks.
The following setting options are available:
Drop-down menu
Stock
Check box
Print elements by default

Specifies a default paper stock for the selected cover element.
Selects all cover elements of a document for printing by default.
If you clear this check box, you must select the cover elements in the Print window manually before
you print.

Check box
Show default label metrics

Displays the normal disc size when you assign a
paper stock with a radius that deviates from the
standard value to a cover element.

Nero CoverDesigner

Printing LightScribe Label

Printing LightScribe Label
If you have a LightScribe recorder connected, you can also print the label side of a LightScribe CD/DVD with Nero CoverDesigner. The label side of the disc has a special color or
thermal layer which is heated by the laser in the recorder so that pictures and text are printed.
This function is only available in the full version. You can always upgrade your
Essentials version at www.nero.com to get the full version with all the functions.
This function is only available in recorders that support LightScribe technology.
To print a LightScribe label, proceed as follows:

1. Create a new document with the LightScribe document type.
 The document contains a Disk 1 tab with the cover element for the disc label.

2. Design the disc label as desired.
3. Click the

icon on the toolbar.

 The LightScribe Print Properties window is opened.

4. Set the desired print options.
5. Insert a recordable LightScribe disc into the LightScribe recorder with the label side facing
down.

6. Click the Print button.
 The printing process begins. You can monitor the process status with the progress bar.
As soon as the printing is finished, the Nero – LightScribe window is opened and displays a message about the result of the printing process.

7. Click the OK button.
 You have successfully created and printed a custom LightScribe label.

Nero CoverDesigner

Printing LightScribe Label

18.1 LightScribe Print Properties Window
You can customize the print properties of your LightScribe label to suit your requirements in
the LightScribe Print Properties window.

LightScribe Print Properties window

The following options are available:
Area

Adjusts the desired print quality.

Print contrast

This option button is set to Normal by default.

Input field

Defines the number of copies you require.

Number of copies
Drop-down menu

Defines the desired recorder.
Available only if multiple LightScribe recorders are available.

Drive
Check box
Automatically shut down the
PC when done
Button

Shuts down the computer after the label has been printed
(if possible).
Starts printing the label.

Print
Button
Preview

Opens the LightScribe Print Preview dialog box. A print
preview of the label is displayed here.

Nero CoverDesigner

Printing Labelflash Label

Printing Labelflash Label
You can print a label on the label and/or data side of a Labelflash DVD with Nero CoverDesigner.
This function is only available in the full version. You can always upgrade your
Essentials version at www.nero.com to get the full version with all the functions.
This feature is only available with a Labelflash recorder.
To print a Labelflash label on the label side or a DiskT@2 on the data side of your DVD, proceed as follows:

1. Create a new document with any document type, e.g. Standard.
2. Click the Disc 1 tab.
3. Edit the disc label as desired.
4. Click the

icon on the toolbar.

 The Labelflash Print Properties window is opened.

5. Set the desired print options.
6. Select the side that you want to print on.
 The logo in the bottom left corner displays the corresponding Labelflash or DiskT@2 logo.

7. If you want to print a Labelflash label on the label side, insert a blank Labelflash disc in the
recorder with the label side facing down. If you want to print a DiskT@2 on the data side, insert a blank Labelflash disc with the data side facing down in the recorder.

8. Click the OK button.
 The Labelflash Print or DiskT@2 Print window is opened and the print process starts.
You can monitor the process status with the progress bar. As soon as printing is finished,
a window is opened, indicating the result of the printing process.

9. Click the OK button.
 You have successfully created and printed a custom Labelflash label or a DiskT@2.
See also:
 Creating a New Document or Image Document 21

Nero CoverDesigner

Printing Labelflash Label

19.1 Labelflash Print Properties Window
You can customize the print properties of your Labelflash label to suit your requirements in
the Labelflash Print Properties window.

Labelflash Print Properties window

The following configuration options and buttons are available:
Drop-down menu

Adjusts the desired print quality.

Profile for

Select Custom to change the contrast level and rotation
speed.

Slider

Specifies the contrast level for printing.

Contrast level
Drop-down menu

Specifies the rotation speed of the DVD.

Rotation speed
Option button

Specifies that the data side should be printed on by default.

Data Side
Option button
Labels

Specifies that the label side should be printed on by default.

Option button

Specifies that both sides should be printed on by default.

Both Sides

Nero CoverDesigner

Printing Labelflash Label
Button
Print Preview

Opens the Print Preview window, which shows an approximation of what the label will look like on the Labelflash
DVD.

Check box

Ejects the disc after printing is complete.

Eject disc after printing
Button

Starts the print process.

Burn (is displayed instead
of the OK button)

Nero CoverDesigner

Program Settings

20.1 Application Preferences Window
You can make settings that determine the general appearance and behavior of Nero CoverDesigner in the Application Preferences window. You can open the window by clicking the
File > Preferences menu.
The window contains the following tabs:
General

Provides general setting options for Nero CoverDesigner such as displaying info messages, and country-specific measurement units.

Folders

Specifies the path for documents, templates, and imported files.

Paper Stocks

Provides setting options for paper stocks.

Specifies the bleed area and allows you to calibrate your printer

Undo

Offers options for undoing actions. You can specify the maximum reserved memory, the number of possible undo steps, or unlimited undo
steps here.

LightScribe

Allows you to specify setting options for LightScribe recorders such as
the print quality, default drive (if multiple LightScribe recorders are installed), default label template, and print resolution.
These setting options are only used if a LightScribe recorder is available.

Creating and burning labels with LightScribe or Labelflash is only available in
the full version.
You can always upgrade your Essentials version at www.nero.com to get the
full version with all the functions.
See also:
 Default Paper Stock Settings 64
 Printer Calibration 60

Nero CoverDesigner

Program Settings

20.2 Specifying Default Settings For Objects
In Nero CoverDesigner, you can specify default settings for objects. The default settings determine the entries in the tabs of the Properties window for an object.
Default settings cannot be configured for pictures.
To specify default settings for objects, proceed as follows:

1. To specify default settings for geometric objects:
1. Click the Object > Default Graphic Properties menu.


The Default Properties window with the Pen and Brush tabs is opened.

2. Specify the desired properties in the tabs.
3. Click the OK button.


The window is closed. Geometric objects will now be inserted with the selected properties by default.

2. To configure default settings for artistic text and fields:
1. Click the Object > Default Artistic Text Properties menu.


The Default Properties window with the Pen, Brush, Font, and Field tabs is opened.

2. Specify the desired properties in the tabs.
3. Click the OK button.


The window is closed. Artistic text and fields will now be inserted with the selected
properties by default.

3. To configure default settings for text boxes, track lists, and folders:
1. Click the Object > Default Text Box Properties menu.


The Default Properties window with the Pen, Brush, Folder, and Tracks tabs is
opened.

2. Specify the desired properties in the tabs.
3. Click the OK button.


The window is closed. Text boxes, track lists, and folders will now be inserted with
the selected properties by default.

 You have successfully configured the default settings for objects.
Changes made on the tabs may sometimes not apply to all objects.

See also:
 Properties And Background Properties Window 36

Nero CoverDesigner

Technical Information

21.1 System Requirements
Nero CoverDesigner is installed along with its suite. Its system requirements are the same.
You can find more detailed information on the system requirements under www.nero.com.







In addition, the following requirements apply:
Printer
Scanner (optional)
Labelflash recorder and disc (optional)
LightScribe capable recorder and LightScribe capable disc (optional)
Using LightScribe Direct Disc Labeling
Your computer requires the latest LightScribe system software when using a
CD or DVD recorder with LightScribe support.
If you have downloaded and installed an updated Nero version from the Nero
website, install the LightScribe system software separately. You can find the latest version at www.nero.com/link.php?topic_id=114&gen_id=8.

21.2 Image Formats














Bitmap (BMP)
Device Independent Bitmaps (DIB)
Graphics Interchange Format (GIF)
Joint Photografic Expert Group (JPEG, JPG, JPE)
Picture Exchange (PCX)
Portable Network Graphics (PNG)
Portable Pixel Map (PPM)
Targa Image File (TGA)
Tagged Image File Format (TIFF, TIF)
Windows Media File (WMF)
Portable BitMap (PBM) - read only
Word Perfect Graphic (WPG)

21.3 Formats For Playlists



Chromeleon Driver Configuration Plugin Nero File (CDC)

Nero CoverDesigner

Index

Index
A
Adding a Disc ........................................ 22
Angle of rotation .................................... 48
Artistic Text
Edit .................................................................. 28

Audiobook CD ................................. 36, 44
B
Background ........................................... 29
Fill Titles .......................................................... 30
Inserting........................................................... 30

Background Properties ......................... 36
Bend...................................................... 36
Bent Text
Edit .................................................................. 27

Biz Card ................................................ 20
Bleeding
Set size............................................................ 70

Border ................................................... 57
Brightness ............................................. 42
Brush..................................................... 36
Business Card CD ................................ 20
C
Calibration Sheet

Crop Marks............................................ 57
D
Data....................................................... 10
Deleting Cover Elements ...................... 23
Design Element..................................... 14
Directory................................................ 37
Disc
Add............................................................. 17, 32

Disc type ......................................... 16, 32
Document data
Document data................................................. 31
Enter ................................................................ 31
Use................................................................... 15

Drawing area......................................... 14
DVD Case ............................................. 18
Dynamic Object..................................... 14
E
Edit .......................................................... 9
Effect ..................................................... 42
Ellipse.............................................. 13, 25
Emboss ................................................. 42
Entry
Add................................................................... 34

EqualizeEqualize................................... 42

Printing ............................................................ 60

CD Case................................................ 18
Color
Select......................................................... 37, 39

F
Field .......................................... 13, 26, 37
Field type............................................... 46

Color Adjustment .................................. 42
Concave View ....................................... 43
Configuration......................................... 71
Contrast................................................. 42
Conventions, manual .............................. 6
Convex View ......................................... 43
Cover Art ............................................... 55
Cover Element

Fields..................................................... 15
File .......................................................... 9
Filter ...................................................... 42
Flip ........................................................ 43
Folder ........................................ 13, 15, 26
Font ....................................................... 36

Add .................................................................. 17
Booklet............................................................. 17
Disc.................................................................. 17
Inlay ................................................................. 17

G
Geometric Object .................................. 14

Artist................................................................. 32
Title .................................................................. 32
Year ................................................................. 32

Creating an Image Document ............... 21

Nero CoverDesigner

Index
H
Help....................................................... 10
Horizontal
Flip................................................................... 43
Reversed Image .............................................. 43

I
Image .................................................... 13
Rotate .............................................................. 43
Scale................................................................ 42

Image .................................................... 36
Import Image ......................................... 36
J
Jewel Case............................................ 18
L
LightScribe Label

Object Properties .................................. 36
Oil Painting Effect.................................. 43
Outline................................................... 43
P
Pen........................................................ 36
Picture ................................................... 26
Pinch ..................................................... 43
Posterize ............................................... 43
Preset
Undo ................................................................ 70

Print....................................................... 56
Program
Launching the Program...................................... 8
Startup ............................................................... 8

Line ................................................. 12, 25
Line Break ............................................. 25

R
Rectangle ........................................ 12, 25
Restore.................................................. 11
Rotate.................................................... 43

M
Manual, conventions ............................... 6
Maxi....................................................... 19
Midtone Value ....................................... 42
Mini CD ................................................. 19
Mosaic................................................... 43
Multi Box ............................................... 18

S
Save ...................................................... 54
Scan ...................................................... 41
Sharpen................................................. 43
Slim Pack .............................................. 19
Solarize ................................................. 43
Start

N
Negative

Startup

Printing ............................................................ 65

From another application ................................. 31
Program ............................................................. 8

Flip................................................................... 43

Nero Digital
Exporting a Cover............................................ 55
Importing.......................................................... 31
Saving the Cover ............................................. 55

Nero Digital Cover Extracting................ 21
O
Object.............................................. 10, 14
Bend ................................................................ 36
Copy ................................................................ 11
Cut ................................................................... 11
Delete .............................................................. 11
Edit .................................................................. 26
Set size............................................................ 48
Transfer properties .......................................... 11

Nero CoverDesigner

Swirl ...................................................... 43
System requirements ............................ 72
T
Template
Generate .......................................................... 17
Save................................................................. 52
Select ......................................................... 16, 22

Text ........................................... 13, 25, 36
Importing .......................................................... 37
Protect.............................................................. 40
Rotate .............................................................. 40

Text box .................................... 13, 25, 36
Protect.............................................................. 40
Rotate .............................................................. 41

Index
Text Line Break ..................................... 25
Tracklist........................................... 13, 15
Tracks ................................................... 37
Transfer properties................................ 11
TWAIN................................................... 10
U
Undo................................................ 11, 29

Nero CoverDesigner

V
Vertically
Flip ................................................................... 43

View ........................................................ 9
W
Watercolor............................................. 43
Window ................................................. 10

Contact

Contact
Nero CoverDesigner is a Nero AG product.

Nero AG
Im Stoeckmaedle 13-15

Internet:

www.nero.com

76307 Karlsbad

Help:

http://support.nero.com

Germany

Fax:

+49 724 892 8499

330 N Brand Blvd Suite 800

Internet:

www.nero.com

Glendale, CA 91203-2335

Help:

http://support.nero.com

USA

Fax:

(818) 956 7094

E-mail:

US-CustomerSupport@nero.com

Rover Center-kita 8F-B, 1-2-2
Nakagawa-chuou Tsuzuki-ku

Internet:

www.nero.com

Yokohama, Kanagawa

Help:

http://support.nero.com

Nero Inc.

Nero KK

Nero CoverDesigner

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Create Date                     : 2009:05:06 09:05:09+02:00
Modify Date                     : 2009:05:06 09:07:20+02:00
Creator Tool                    : Acrobat PDFMaker 9.0 für Word
Metadata Date                   : 2009:05:06 09:07:20+02:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Creator                         : SCHEMA ST4 DocuManager
Title                           : ____NCD_UML_Nero CoverDesigner
Description                     : SCHEMA ST4 DocuManager
Document ID                     : uuid:a1bfc105-ad25-4db7-8953-246eb6e7911d
Instance ID                     : uuid:3adeba6a-0823-4799-a0c2-be23b66cb600
Subject                         : 2
Company                         : Nero AG
Margin Indent                   : 4
Dot Version                     : 1.1.1.1642
Language                        : en-US
Meta Pub Company Name           : Nero
Meta Pub Company Name Addendum  : AG
Meta Pub Company Url            : www.nero.com
Meta Pub Product Name           : Nero CoverDesigner
Meta Pub Product Type           : Nero CoverDesigner
Meta Pub Publication Type       : Nero CoverDesigner
Source Modified                 : D:20090506070332
Headline                        : SCHEMA ST4 DocuManager
Page Layout                     : OneColumn
Page Count                      : 76
Author                          : SCHEMA ST4 DocuManager
Meta Pub Company Name           : Nero
Meta Pub Company Name Addendum  : AG
Meta Pub Company Url            : www.nero.com
Meta Pub Product Name           : Nero CoverDesigner
Meta Pub Product Type           : Nero CoverDesigner
Meta Pub Publication Type       : Nero CoverDesigner

EXIF Metadata provided by EXIF.tools

Nero ____NCD_UML_Nero CoverDesigner Cover Designer Instruction Manual Eng

Navigation menu

Versions of this User Manual:

Views

Navigation