Netgear orporated 06200049 RangeMax NEXT Wireless mPCI User Manual User s Manual
Netgear Incorporated RangeMax NEXT Wireless mPCI User s Manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 675174 |
| Application ID | 6fD2FfWjYMW/Sj1H55152A== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 42.61kB (532570 bits) |
| Date Submitted | 2006-06-29 00:00:00 |
| Date Available | 2006-06-29 00:00:00 |
| Creation Date | 2006-05-04 10:43:50 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2006-06-29 15:00:53 |
| Document Title | Microsoft Word - User’s Manual |
| Document Creator | Acrobat PDFMaker 7.0.5 for Word |
| Document Author: | Will_Huang |
Wireless Lan 802.11n miniPCI User’s Manual Version 1.0 Web Site: www.gemtek.com.tw E-Mail: sales@mail.gemtek.com.tw Phone: +886-3-598-5535 Fax: +886-3-598-5585 WNR834M IEEE 802.11b/g with EWC Mini-PCI Wireless LAN Module Specification Product Name WNR834M Host Interface miniPCI Dimensions 59 x 89 x 3.5 mm (non standard size, for module only) Frequency Band 2.400 ~ 2.4835GHz (subject to local regulations) Number of Channel USA and Canada: 11ch~ 1,2,3,4,5,6,7,8,9,10,11 (EWC 40MHz mode: 1&5,2&6,3&7,4&8,5&9,6&10,7 &11) Most European countries: 13ch~ 1,2,3,4,5,6,7,8,9,10,11,12,13 (EWC 40MHz mode: 1&5,2&6,3&7,4&8,5&9,6&1 0,7&11,8&12,9&13) France: 4ch~ 10,11,12,13 (EWC 40MHz mode: TBD) Japan: 13ch (optional 14ch) 1,2,3,4,5,6,7,8,9,10,11,12,13 (EWC 40MHz mode: 1&5,2&6,3&7,4&8,5&9,6&1 0,7&11,8&12,9&13) Modulation 802.11b: CCK, QPSK, BPSK 802.11g: 64-QAM, 16-QAM EWC: 64-QAM, 16-QAM, QPSK, BPSK Spreading 802.11b DSSS (Direct Sequence Spread Spectrum) 802.11g OFDM (Orthogonal Frequency Division Multiplexing) EWC: see Achievable Data-Rate Based on EWC Data Rate IEEE 802.11b: 11, 5.5,2,1Mbps IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps EWC: see Achievable Data-Rate Based on EWC Operating Voltage Current consumption DC 3.3V +/- 10% Continuous TX: 570±10mA @ 802.11b, 14dBm Power Continuous TX: 560±10mA @ 802.11g, 14dBm Power Continuous TX: 580±10mA @ EWC mode, 14dBm Power 802.11b: 21 dBm@2TX Nominal Temp Range of 802.11g: 22 dBm@2TX Transmit Power EWC: 22 dBm@2TX Tolerance: +/- 1.5dB -86dBm @ 802.11b, 11Mbps PER≦8% Receive Sensitivity in -80dBm @ EWC, 6.5Mbps PER≦10% room temperature -71dBm @ EWC, 135Mbps PER≦10% Web Site: www.gemtek.com.tw E-Mail: sales@mail.gemtek.com.tw Phone: +886-3-598-5535 Fax: +886-3-598-5585 Security TBD- (Hardware 64/128-bit WEP; WEP weak key avoidance; TKIP; hardware AES engine, WPA, 802.1x and 802.11i) Driver Standards IEEE 802.11b, 802.11g, EWC, Wi-Fi compliant (TBD) Warranty 1 year Temperature Range 0 ~ 65°C (Operating), -20~85°C (Storing) Operating Humidity 10% to 85% Non-Condensing Storage Humidity 5% to 90% Non-Condensing Humidity Antenna No, with 3 RF connectors Operating Range The transmission speed varies in the surrounding environment. Roaming Full mobility and seamless roaming from cell to cell and across access points (subject to access point) Network Architectures Infrastructure and Ad Hoc Management Utility Link config for network join and diagnostics TBD(FCC part 15C/15.247; ETS 300 328-2; UL; IEC60950; EN301 489-1, EMC certification 17; prEN50371; CE Mark; TELEC.) Achievable Data-Rate Based on EWC MCS Index Nss Modulation NCBPS NBPSC NDBPS Datarate(Mbps) 800nsGI 400nsGI 20MHz 40MHz 20MHz 40MHz 20MHz 40MHz 20MHz 40MHz BPSK ½ 52 108 26 54 6.5 13.5 7.200 15 QPSK ½ 104 216 52 108 13.0 27.0 14.400 30 QPSK ¾ 104 216 78 162 19.5 40.5 21.700 45 16-QAM ½ 208 432 104 216 26.0 54.0 28.900 60 16-QAM ¾ 208 432 156 324 39.0 81.0 43.300 90 64-QAM 2/3 312 648 208 432 52.0 108.0 57.800 120 64-QAM ¾ 312 648 234 486 58.5 121.5 65.000 135 64-QAM 5/6 312 648 260 540 65.0 135.0 72.200 150 BPSK ½ 104 216 52 108 13.0 27.0 14.444 30 QPSK ½ 208 432 104 216 26.0 54.0 28.889 60 10 QPSK ¾ 208 432 156 324 39.0 81.0 43.333 90 11 16-QAM ½ 416 864 208 432 52.0 108.0 57.778 120 12 16-QAM 3/4 416 864 312 648 78.0 162.0 86.667 180 13 64-QAM 2/3 624 1296 416 864 104.0 216.0 115.556 240 14 64-QAM ¾ 624 1296 468 972 117.0 243.0 130.000 270 15 64-QAM 5/6 624 1296 520 1080 130.0 270.0 144.444 300 1 MARVELL SEMICONDUCTOR PROPRIETARY INFORMATION EEPROM SDRAM U4 CardBUS miniPCI PCI Y1 U13 U3 Interface WMIM-205GN Block Diagram WLAN 802.11g/b Wireless 40 MHz XTAL U7 2.4 GHz PA U5 U6 Switch 88W8361P U8 Switch Switch Antenna Connect A U9 U11 Filter 88W8060 2.4 GHz PA Table of Contents: BP1 1.2V U2 Power Supplie 1. Title Page 2. MiniPCI connector 3. JTAG, SPI EEPROM, and Power Supply 4. 88W8361P SoC Interface 5. MemoryDRAM/Flash 6. 88W8060F I/O 7. 802.11g/b External Power Amplifier and RF I/O BP2 Filter Antenna Connect B BP3 Filter Antenna Connect C U1 Power Supplies 3.0V 3.3V WLAN 802.11g/b 2x3 MIMO Reference Design Schematic MB-82 v1.0 Design Schematic v1.1 Model name: WNR834M for NETGEAR MARVELL SEMICONDUCTOR CONFIDENTIAL Company NOTE: THIS SCHEMATIC IS AN ADVANCED DESIGN. MARVELL RESERVES THE RIGHT TO MAKE CHANGES TO THE SCHEMATIC AT ANY TIME WITHOUT NOTICE. Title Size Date: Marvell Semiconductor Inc. 5488 Marvell Lane Santa Clara, CA 95054, USA MB-82 v 1.0 Reference Schematic Document Number MV-SR00101-01 Thursday, May 04, 2006 Rev Sheet of Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NETGEAR declares that US model of WNR834M (FCC ID: PY306200049) is limited in CH1-CH11 for 2.4G band by specific firmware controlled by the manufacturer and is not user changeable. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users (for example: Access point, Router…etc). The final end product must be labeled in a visible area with the following: “Contains TX FCC ID: PY306200049”. Manual Information That Must be Included The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrate this module. The users manual for OEM integrators must include the following information in a prominent location “ IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Create Date : 2006:05:04 10:43:50+08:00 Modify Date : 2006:06:29 15:00:53+08:00 Tagged PDF : No Producer : Acrobat Distiller 7.0.5 (Windows) Mod Date : 2006:06:29 15:00:53+08:00 Creation Date : 2006:05:04 10:43:50+08:00 Author : Will_Huang Metadata Date : 2006:06:29 15:00:53+08:00 Creator Tool : Acrobat PDFMaker 7.0.5 for Word Document ID : uuid:674c284a-1c3b-4b45-a555-4693c0063f18 Instance ID : uuid:472c8efb-a8e9-4ae2-8820-8e46df2d389c Format : application/pdf Title : Microsoft Word - User’s Manual Creator : Will_Huang Page Count : 7 Has XFA : NoEXIF Metadata provided by EXIF.tools