Netgear orporated 07300073 RangeMax Dual Band Wireless-N USB User Manual FullManual

Netgear Incorporated RangeMax Dual Band Wireless-N USB FullManual

UserManual.wiki >

Netgear orporated >

07300073 User Manual >

Contents

1. Users manual
2. Manual

Users manual

202-10329-01 December 2007NETGEAR, Inc.4500 Great America Parkway Santa Clara, CA 95054 USANETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual

v1.0, December 2007iii• Connect the equipment to an outlet other than the receiver’s • Consult a dealer or an experienced radio/TV technician for assistanceFCC Caution: Any change or modification to the product not expressly approved by Netgear could void the user’s authority to operate the device.FCC RF Radiation Exposure and SAR StatementsSAR Statement The NETGEAR WNDA3100 has been tested for body-worn Specific Absorption Rate (SAR) compliance. The FCC has established detailed SAR requirements and has established that these requirements have been met while installed in host notebook computer. RF Exposure InformationThe radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to the requirements as set forth in CFR 47 Sections, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves. The highest SAR level measured for this device was 1.56 W/kg.Canadian Department of Communications Industry Canada (IC) NoticeThis Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Cet appareil numérique de la classe B est conforme à la norme NMB-003 et CNR-210 du Canada. “To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.”“Pour empêcher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit être utilisé à l’intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son antenne d’émission) est installé à l’extérieur, il doit faire l’objet d’une licence.”Europe - EU Declaration of ConformityA printed copy of the EU Declaration of Conformity certificate for this product is provided in the WNDA3100 product package. Èesky [Czech] NETGEAR, Inc. tímto prohlašuje, že tento NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 je ve shodì se základními požadavky a dalšími pøíslušnými ustanoveními smìrnice 1999/5/ES.Dansk [Danish]Undertegnede NETGEAR, Inc. erklærer herved, at følgende udstyr NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.Deutsch [German]Hiermit erklärt NETGEAR, Inc., dass sich das Gerät NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

v1.0, December 2007ivEesti [Estonian]Käesolevaga kinnitab NETGEAR, Inc. seadme NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.English Hereby, NETGEAR, Inc., declares that this NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Español [Spanish]Por medio de la presente NETGEAR, Inc. declara que el NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.Ελληνική [Greek]ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ NETGEAR, Inc. ΔΗΛΩΝΕΙ ΟΤΙ NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.Français [French]Par la présente NETGEAR, Inc. déclare que l'appareil NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.Italiano [Italian]Con la presente NETGEAR, Inc. dichiara che questo NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.Latviski [Latvian]Ar šo NETGEAR, Inc. deklarç, ka NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 atbilst Direktîvas 1999/5/EK bûtiskajâm prasîbâm un citiem ar to saistîtajiem noteikumiem.Lietuviø [Lithuanian] Šiuo NETGEAR, Inc. deklaruoja, kad šis NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.Nederlands [Dutch]Hierbij verklaart NETGEAR, Inc. dat het toestel NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.Malti [Maltese]Hawnhekk, NETGEAR, Inc., jiddikjara li dan NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC.Magyar [Hungarian]Alulírott, NETGEAR, Inc. nyilatkozom, hogy a NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.Polski [Polish] Niniejszym NETGEAR, Inc. oœwiadcza, ¿e NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 jest zgodny z zasadniczymi wymogami oraz pozosta³ymi stosownymi postanowieniami Dyrektywy 1999/5/EC.Português [Portuguese] NETGEAR, Inc. declara que este NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.

v1.0, December 2007vProduct and Publication DetailsSlovensko [Slovenian] NETGEAR, Inc. izjavlja, da je ta NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloèili direktive 1999/5/ES.Slovensky [Slovak] NETGEAR, Inc. týmto vyhlasuje, že NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 spåòa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.Suomi [Finnish] NETGEAR, Inc. vakuuttaa täten että NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.Svenska [Swedish]Härmed intygar NETGEAR, Inc. att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.Model Number: WNDA3100Publication Date: December 2007Product Family: Wireless-N USB AdapterProduct Name: NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100Home or Business Product: HomeLanguage: EnglishPublication Part Number: 202-10329-01Publication Version Number: 1.0

v1.0, December 2007vi

viiv1.0, December 2007ContentsAbout This ManualConventions, Formats, and Scope ................................................................................... ixHow to Use This Manual ................................................................................................... xHow to Print This Manual .................................................................................................. xChapter 1 Basic SetupWhat You Need Before You Begin ..................................................................................... 1Verify System Requirements ....................................................................................... 1Observe Wireless Location and Range Guidelines .....................................................2What Is in the Box .............................................................................................................3WNDA3100 Default Wireless Settings .............................................................................. 3Installation .........................................................................................................................4Installing the WNDA3100 Software .............................................................................4Connecting the Wireless-N USB Adapter ...................................................................5Using the Smart Wizard to Set Up Your Wireless-N USB Adapter .............................6Connecting to Wireless Networks and the Internet ........................................................... 8WNDA3100 Icon Colors ..............................................................................................9Smart Wizard Status Bar .............................................................................................9Wireless-N USB Adapter LED ................................................................................... 11Placing the USB Adapter Cradle ..................................................................................... 11Removing the WNDA3100 Software ............................................................................... 13Upgrading the WNDA3100 Software ...............................................................................13Chapter 2 Network Connections and Wireless SecurityDisabling the Windows Zero Configuration Utility .............................................................. 1Understanding the Smart Wizard ...................................................................................... 2Viewing Wireless Networks in Your Area ...........................................................................2Finding a Network ..............................................................................................................4Profiles ............................................................................................................................... 5

ixv1.0, December 2007About This ManualThe NETGEAR® RangeMax™ Duo Wireless-N USB Adapter WNDA3100 User Manual describes how to install, configure and troubleshoot the NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100. The information in this manual is intended for readers with intermediate computer and Internet skills.Conventions, Formats, and ScopeThe conventions, formats, and scope of this manual are described in the following paragraphs:•Typographical Conventions. This manual uses the following typographical conventions::•Formats. This manual uses the following formats to highlight special messages:Italic Emphasis, books, CDsBold User input, IP addresses, GUI screen textitalic URL linksNote: This format is used to highlight information of importance or special interest.Tip: This format is used to highlight a procedure that will save time or resources.Warning: Ignoring this type of note may result in a malfunction or damage to the equipment.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manualxv1.0, December 2007•Scope. This manual is written for the RangeMax Dual Band Wireless-N USB Adapter WNDA3100 according to these specifications:For more information about network, Internet, firewall, and VPN technologies, see the links to the NETGEAR website in Appendix B, “Related Documents.How to Use This ManualThe HTML version of this manual includes the following:• Buttons, and , for browsing forwards or backwards through the manual one page at a time• A button that displays the table of contents and an button. Double-click on a link in the table of contents or index to navigate directly to where the topic is described in the manual.• A button to access the full NETGEAR, Inc. online knowledge base for the product model.• Links to PDF versions of the full manual and individual chapters.How to Print This ManualTo print this manual, you can choose one of the following options, according to your needs.•Printing a page from HTML. Each page in the HTML version of the manual is dedicated to a major topic. Select File > Print from the browser menu to print the page contents. •Printing from PDF. Your computer must have the free Adobe Acrobat reader installed in order to view and print PDF files. The Acrobat reader is available on the Adobe Web site at http://www.adobe.com.Product Version NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100Manual Publication Date December 2007Note: Product updates are available on the NETGEAR, Inc. website athttp://kbserver.netgear.com.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manualxiv1.0, December 2007– Printing a PDF chapter. Use the PDF of This Chapter link at the top left of any page.• Click the PDF of This Chapter link at the top left corner of any page in the chapter you want to print. The PDF version of the chapter you were viewing opens in a browser window. • Click the print icon in the upper left of your browser window.–Printing a PDF version of the complete manual. Use the Complete PDF Manual link at the top left corner of any page.• Click the Complete PDF Manual link at the top left corner of any page in the manual. The PDF version of the complete manual opens in a browser window. • Click the print icon in the upper left of your browser window. Tip: If your printer supports printing two pages on a single sheet of paper, you can save paper and printer ink by selecting this feature.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manualxiiv1.0, December 2007

1-1v1.0, December 2007Chapter 1Basic SetupThis chapter describes how to install your RangeMax Dual Band Wireless-N USB Adapter WNDA3100 and set up basic wireless connectivity on your wireless local area network (WLAN). Advanced wireless network set up is covered in “Network Connections and Wireless Security” in Chapter 2.What You Need Before You BeginYou need to verify that your computer meets the minimum system requirements and identify the wireless network settings of the WLAN where you will connect before you can set up your wireless USB adapter and connect. Verify System RequirementsBefore installing the NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100, please make sure that these minimum requirements have been met:• You must have a PC with a Pentium 300 MHz or higher compatible processor with an available USB 2.0 or 1.1 port.•A CD drive.Note: Indoors, computers can easily connect to 802.11 wireless networks at distances of several hundred feet. Because walls do not always block wireless signals, others outside your immediate area could access your network. It is important to take steps to secure your network from unauthorized access. The wireless USB adapter provides highly effective security features, which are covered in “Using Wireless Security Features” in Chapter 2. Use the security features appropriate to your needs.Note: The maximum speed of a USB v2.0 port is 480 Mbps. If your computer has a USB v1.1 port, the WNDA3100 is limited to that port’s maximum speed, which is 14 Mbps.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual1-2v1.0, December 2007• 5 Mbytes of free hard disk space.• Vista, Windows XP Home, or Windows XP Professional. Some versions of Windows ask for the original Windows operating system installation files to complete the installation of the WNDA3100 driver software.Observe Wireless Location and Range GuidelinesFor best performance, place the wireless USB adapter at least 4 feet (over 1 meter) away from the wireless router or access point.Computers can connect over wireless networks indoors at a range that varies significantly based on the physical location of the computer with the wireless USB adapter. For best results, avoid potential sources of interference, such as the following: • Large metal surfaces•Microwaves• 2.4 GHz or 5 GHz cordless phonesIn general, wireless devices can communicate through walls. However, if the walls are constructed with concrete, or have metal, or metal mesh, the effective range decreases if such materials are between the devices.Note: Windows XP users must install SP2 or install the KB822603 hot fix (update), which fixes the USB 2.0 host controller driver. Go to the following link to install the hot fix:http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=733dd867-56a0-4956-b7fe-e85b688b7f86Note: If there is 2.4 GHz interference at your location, such as from a cordless phone, you can change the setting to 5 GHz for better wireless throughput. See “Advanced Settings” on page 2-17.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual1-3v1.0, December 2007What Is in the BoxThe product package should contain the following items:• NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100• Installation Guide for the NETGEAR RangeMax™ Dual Band Wireless-N USB Adapter WNDA3100•Resource CD, including:– Driver and configuration utility software–NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual (this document)– Animated Network Properties Configuration Tutorial– PC Networking Tutorial• Warranty and Support information cardIf any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair.WNDA3100 Default Wireless SettingsIf this is a new wireless network installation, use the factory default settings to set up the network and verify wireless connectivity. If this is an addition to an existing wireless network, you must identify the wireless network and wireless security settings that are already defined. Your RangeMax Dual Band Wireless-N USB Adapter WNDA3100 basic factory default settings are: • Network Name Service Set Identification (SSID), Any (First available network)• Network mode (Infrastructure or Ad-hoc), Infrastructure• Data security WEP, WPA2-PSK, or WPA-PSK encryption, DisabledNote: For the RangeMax Dual Band Wireless-N USB Adapter WNDA3100 to communicate with a wireless access point or wireless adapter, all devices must be set up to use the same wireless network name (SSID).

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual1-4v1.0, December 2007Installation To complete this installation you must:1. Install the WNDA3100 software.2. When prompted, insert the wireless USB adapter and follow the Windows XP Found New Hardware wizard prompts (unless using Vista).3. Set up the wireless USB adapter to connect to your wireless network.Installing the WNDA3100 SoftwareTo install the software:1. Insert the Resource CD. If the Welcome screen does not open, browse the files on the CD, and double-click Autorun.exe.2. Click Install the Software.The Software Update Check screen displays: 3. If you are connected to the Internet, click Check for Updates. If not, you can choose to install from the CD.Note: Do not connect the wireless USB adapter until you are prompted to do so.Figure 1-1

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual1-6v1.0, December 20073. For Windows Vista computers, the adapter and driver are automatically added. Click Next and then go to the following section “Using the Smart Wizard to Set Up Your Wireless-N USB Adapter” on page 1-6. For Windows XP computers, the Found New Hardware Wizard displays.4. Follow the onscreen instructions for the Found New Hardware Wizard.5. When the NETGEAR Smart Wizard screen returns, click Next. Using the Smart Wizard to Set Up Your Wireless-N USB AdapterAfter you have connected the wireless USB adapter, the following screen displays:Windows XP or Vista users can set up the wireless adapter either with the NETGEAR Smart Wizard (recommended) or the Windows configuration utilities. •NETGEAR Smart Wizard. Reveals more information about each network and makes it easier to troubleshoot network connection problems.•Windows configuration utilities. See the Windows documentation or the NETGEAR application note at: http://documentation.netgear.com/reference/enu/winzerocfg/index.htm.To set up your wireless USB adapter with the NETGEAR Smart Wizard:1. Click Next to proceed.Figure 1-3

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual1-8v1.0, December 20075. After you have reviewed the settings, click Finish. The Settings screen displays:The icon appears in the system tray and on the desktop. The wizard initiates your wireless connection, which could take up to a minute. 6. Use the status bar to verify your wireless connectivity. See “Smart Wizard Status Bar” on page 1-9.”Connecting to Wireless Networks and the InternetThe WNDA3100 has indicators in three locations that show the status of your connection to a wireless network and to the Internet:•WNDA3100 icon. After you install the WNDA3100 software, the icon appears on the desktop and in the right on the Windows task bar. It is color coded to show the status of the connection. •Smart Wizard status bar. Clicking on the system tray icon opens the Smart Wizard. The status bar at the bottom of the screen shows details about your wireless and Internet connection. See “Smart Wizard Status BarFigure 1-6Note: The maximum speed of a USB v2.0 port is 480 Mbps. If your computer has a USB v1.1 port, the WNDA3100 is limited to that port’s maximum speed, which is 14 Mbps.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual1-9v1.0, December 2007•LED status light. The LED on the wireless USB adapter shows the network connection. Solid indicates a connection. The LED blinks when the wireless USB adapter is looking for a network association and when it is sending or receiving data. See “Wireless-N USB Adapter LED” on page 1-11.WNDA3100 Icon ColorsThe WNDA3100 icon is on the desktop and in the Windows system tray. The system tray is on one end of the taskbar in the Microsoft Windows desktop. Smart Wizard Status BarClick the icon to open the Smart Wizard so that you can view the status bar. The Smart Wizard Settings tab displays. The status bar is located at the bottom of the Settings tab.Color Condition DescriptionRed The wireless USB adapter has no connection to any other wireless node.The wireless USB adapter cannot link to any other wireless node, or the link is lost. Check your configuration, or try moving to a location where the wireless signal quality is better.Yellow The wireless USB adapter has a connection with another wireless node.The wireless link is weak. Move to a better location, such as closer to the wireless access point. Also, look for possible interference such as a 2.4 GHz cordless phone or large metal surface.Green The wireless USB adapter has a connection with another wireless node.The wireless USB adapter has established good communication with an access point, and the signal quality is strong.Figure 1-7WirelessnetworkConnection statusSecurityFind a NetworkChannel ThroughputSignalstrength

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual1-10v1.0, December 2007The following table describes how to interpret the Smart Wizard status bar.The connection status is useful in isolating a problem. For example, if you are connected to a router, but not to the Internet, then check the router’s Internet connection.If you right-click the system tray icon, you can disable the Internet notification feature by clearing the check mark enabling notification, as shown in the following figure. If you do so, then only the IP address is shown.Understanding the Status BarWireless network Identifies which wireless network you have joined.Security • A closed lock indicates that security is enabled. • An open lock indicates an open network without wireless security.Channel The wireless channel used by the network. If many wireless networks in your area use the same channel, they can interfere with one another.Throughput • To optimize wireless throughput, connect to a network with a high-speed router or access point and a high-speed Internet connection.See Chapter 3, “Wireless Network Performance.• If there is wireless interference in the 2.4 GHz range, such as from a cordless phone, use the Advanced Settings to select 5GHz. See “Advanced Settings” on page 2-17.• If your computer has a USB v1.1 port, the wireless USB adapter is limited to that port’s maximum speed, which is 14 Mbps.Signal strength More dots indicates a stronger signal. Usually, you experience higher throughput when the signal is strongest.Find a Network Click Find a Network to open the Connection Wizard.Connection statusThe status of your network connection.•Connected to Internet. The wireless Internet connection is OK.•Connected to Router. The wireless connection to the router is OK, but the router is not connected to the Internet.169.254.x.x or ___.___.___.___ . The wireless connection to the router is OK, but there is a problem with the router. See the online help or Chapter 4, “Troubleshooting.Figure 1-8

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual1-11v1.0, December 2007In Vista, there is one more option: Enable NETGEAR Smart Wizard. If you clear the check mark for Enable NETGEAR Smart Wizard, the NETGEAR Smart Wizard is disabled, and you must set up the wireless adapter with Vista auto-configuration.Wireless-N USB Adapter LEDThe LED on the wireless USB adapter indicates the condition of wireless link.Placing the USB Adapter CradleYou can attach the wireless USB adapter directly to a USB port on your computer, or use the USB cable to extend the range and obtain better wireless reception. To use the USB cable, plastic cradle, and loop-and-hook fastener for better USB adapter placement on a computer monitor:Figure 1-9Wireless-N USB Adapter LED MeaningThe LED color changes depending on the type ofnetwork connection. Amber indicates 2.4 GHz, and blueindicates 5 GHz.Off • The wireless USB adapter in not plugged in to the USB port.• The wireless USB adapter is in power save mode (default from power up or reset).Slow blinking•Alternating amber and blue. The wireless USB adapter is scanning for a network.•Amber. The wireless USB adapter is connecting to a network at 2.4 GHz.•Blue. The wireless USB adapter is connecting to a network at 5 GHz.Blinking The wireless USB adapter is connected to a wireless network, and is sending or receiving data.Solid The wireless USB adapter isconnected to a wireless network, but it is not sending or receiving data.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual1-12v1.0, December 20071. The wireless USB adapter comes with three black fasteners. Locate the one with a prickly side, and attach it to the plastic cradle on the middle of the outside rear.2. Insert the wireless USB adapter in the plastic cradle, and connect the USB cable. 4. Place one of the other pieces of loop-and-hook fastener on the side or back of your monitor near the top for better reception. Then join the pieces of the fastener to attach the USB adapter in the plastic cradle to the monitor.Figure 1-10Figure 1-11Figure 1-12

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual1-13v1.0, December 2007Removing the WNDA3100 SoftwareYou can remove the wireless adapter software in these two ways:• Select the Windows Start menu > RangeMax Dual Band Wireless-N USB Adapter WNDA3100 program group > uninstall option, and then follow the screen prompts.• Select Windows Start menu >Control Panel > Add or Remove Program, and then select the RangeMax Dual Band Wireless-N USB Adapter WNDA3100 option, and follow the screen prompts.Upgrading the WNDA3100 SoftwareUpgrades may be available at the NETGEAR website. To install an upgrade, follow these steps.1. Write down the settings for any profiles that you want to save. They will not be retained.2. Download the upgrade from the NETGEAR website Support page.3. Remove the WNDA3100 software from your computer. 4. Remove the WNDA3100 adapter from your computer, and if prompted restart your computer.5. Run the installer that you downloaded (the file ends in .exe).6. Follow the installer instructions, and if prompted, restart your computer.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual1-14v1.0, December 2007

2-1v1.0, December 2007Chapter 2Network Connections and Wireless SecurityThis chapter explains how to use your Wireless-N USB Adapter to connect to your wireless local area network (WLAN) and how to set up wireless security for the Wireless-N USB Adapter so that it matches the wireless security settings for your network. If you chose the Windows XP or Windows Vista Zero Configuration utility during installation, and now you want to use the Smart Wizard, you must disable the Windows utility. If you are working with the Vista configuration utility, see the NETGEAR online application note at: http://documentation.netgear.com/reference/enu/winzerocfg/index.htm Disabling the Windows Zero Configuration UtilityTo disable the Windows Zero Configuration utility:1. Attach the wireless adapter to a USB port for your computer.2. In Windows, select Start > Network Connections. 3. Select Wireless Network Connection, right-click, and then select Properties. 4. Click the Wireless Networks tab. Then clear the Use Windows to configure my wireless settings check box.Figure 2-1

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual2-2v1.0, December 2007Understanding the Smart WizardThese instructions explain how to use the NETGEAR WNDA3100 Smart Wizard to change the wireless USB adapter wireless settings. When you have installed the software from the Resource CD, the icon appears on your desktop and in the Windows system tray. The Windows system tray is located on the Windows taskbar. You can either double-click this icon on the desktop or click it in the system tray at any time, to use the Smart Wizard. This software automatically restarts when you reboot your computer. The Smart Wizard provides a complete and easy-to-use set of tools to:• View details about wireless networks in your area.• Choose the network that you want to use.• Configure wireless settings for your wireless USB adapter .• Save your wireless network settings in profiles.• Remove or reinstall the wireless adapter software.The following sections . explain how to use the Smart Wizard. Viewing Wireless Networks in Your AreaYou can use the Networks tab to view all available wireless networks in your area. You can also scan to search for wireless networks and refresh the tab.To view information about wireless networks:1. Use the icon to open the Smart Wizard.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual2-3v1.0, December 20072. Click the Networks tab to display the following screen:The following buttons are located at the bottom of the Networks tab:•Help. Display online help.•Find a Network. View networks and join a network. See “Finding a Network” on page 2-4.•Connect. Connect to the network that you selected.•Scan. Check for wireless networks. Clicking Scan refreshes the screen.•Close. Close the window of the Wizard.The screen shows the following information for each network scanned:•Network Name (SSID). The name assigned to a wireless network. This is the same as the SSID or ESSID configuration parameter. Note that as a security measure, some wireless access points do not broadcast their SSID. In such cases, the SSID field is blank even though the rest of the information is still displayed. •Channel. The channel determines which operating frequency is used. In this column (A) indicates a 5 GHz network, and (G) indicates a 2.4 GHz network.•N. The access point supports wireless N mode.•Security. Identifies whether the wireless network uses security settings such as WPA2-PSK, WPA-PSK, or WEP.•Signal. Identifies the signal strength of the communications.•MAC Address. Identifies the hardware address (MAC address) of the wireless device broadcasting this information.Figure 2-2You can click a columnheading to sort.If many networks usethe same channel theycan interfere with eachother. (A) indicates a 5 GHzThe status bar showsyour network connectionand Internet connection.network, and (G) indicates a2.4 GHz network.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual2-9v1.0, December 2007c. A continuous ping will be sent to the device with the 192.168.0.1 static IP address. The ping response should change to Reply.At this point the connection is established. Starting a Computer-to-Computer (Ad Hoc) Network Connection1. On the Settings tab of the Smart Wizard, select or type the network name (SSID).2. Select the Computer-to-Computer (Ad Hoc) network type.3. Click Initiate Ad Hoc. The Ad Hoc Setting screen displays:4. In the Start Ad Hoc drop-down list, select the wireless standard (802.11a, 802.11b, or 802.11g) for your Ad Hoc computer-to-computer network.5. In the Channel drop-down list, Automatic should work. If you notice interference problems with another nearby wireless device, select a channel that is not being used by any other wireless networks near your wireless adapter. Use the Networks tab to view the channels in use in your area.Figure 2-7Note: If you cannot connect, see “Removing the WNDA3100 Software” in Chapter 1. For problems accessing network resources, the Windows client and rile and print sharing software might not be installed or configured correctly on your computers. See the link to “Internet Networking and TCP/IP Addressing:” in Appendix B.Figure 2-8

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual2-10v1.0, December 20076. Click OK.Wireless SecurityMany networks use wireless security to encrypt wireless data communications. If you try to connect to a network with wireless security, the Smart Wizard detects it. Before you can use that network, you must set up the WNDA3100 with exactly the same kind of wireless security settings. The main types of wireless security used for home networks are the following:• Wi-Fi Protected Access 2 Pre-Shared Key (WPA2-PSK)• Wi-Fi Protected Access Pre-Shared Key (WPA-PSK)• Wired Equivalent Privacy (WEP)For more information about wireless security, see the wireless reference document athttp://documentation.netgear.com/reference/enu/wireless/index.htm.In addition to the wireless security features, networks should use LAN network security features such as requiring a user name and password to access the shared resources in the network.Using Wireless Security FeaturesYou can strengthen the security of your wireless connection by enabling Wired Equivalent Privacy (WEP) encryption of the wireless data communications. Or, you can use WPA-PSK (Wi-Fi Protected Access Pre-Shared Key) encryption. For more information about wireless security, see the link to “Wireless Communications:” in Appendix B.In addition to the WNDA3100 wireless security features, you should also configure appropriate LAN network security features such as requiring a user name and password to access the shared resources in your network.Note: The channel number differs depending on the country. The connection speed automatically defaults to the highest speed.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual2-11v1.0, December 2007Wireless Network Name (SSID) and Security SettingsPrint this form, fill in the configuration parameters, and put it in a safe place for possible future reference. For an existing wireless network, the person who set up the network can provide this information.•Network Name (SSID). The service set Identification (SSID) identifies the wireless local area network. Any (First available network) is the default WNDA3100 wireless network name (SSID). You may customize it using up to 32 alphanumeric characters. Write your customized wireless network name (SSID) on the line below. Wireless network name (SSID): ______________________________ •If WPA2-PSK or WPA-PSK authentication is used: –Passphrase: ______________________________ These characters are case-sensitive. Enter a word or group of printable characters. When you use WPA-PSK, the other devices in the network cannot connect unless they are set to WPA-PSK as well, and are configured with the correct passphrase. •If WEP authentication is used:–WEP encryption key size. Identify one: 64-bit or 128-bit. The encryption key size must the wireless network settings.–Data encryption (WEP) keys. There are two methods for creating WEP data encryption keys. Whichever method you use, record the key values in the spaces below.•Passphrase method: ______________________________ These characters are case-sensitive. Enter a word or group of printable characters and click the Generate Keys button. Not all wireless devices support the passphrase method.•Manual method. These values are not case sensitive. For 64-bit WEP, enter 10 hex digits (any combination of 0–9 or a–f). For 128-bit WEP, enter 26 hex digits.Key 1: _____________________________ Key 2: _____________________________ Key 3: _____________________________ Key 4: _____________________________ Note: The SSID in the wireless access point is the SSID you configure in the wireless USB adapter. For the access point and wireless nodes to communicate with each other, all must be configured with the same SSID.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual2-15v1.0, December 2007Statistics TabThe Statistics tab provides real time and historical trend information about the data traffic and performance of your wireless adapter.•Transmit/Receive Performance (%). A real-time graph identies the total, receive, and transmit utilization as a percentage the total possible. •Transmit, Receive, and Total (TxRx). Radio buttons let you select whether to display the transmit performance, the receive performance, or both in the same graph.•Transmit Statistics. Identifies transmit megabits per second (Mbps), transmit packets per second (Tx Packets/s), total transmitted packets, and transmit errors.•Receive Statistics. Identifies receive megabits per second (Mbps), receive packets per second (Rx Packets/s), total received packets, and reception errors.Figure 2-11

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual2-16v1.0, December 2007About TabThe About tab displays the current version information.The following information is displayed in the About tab:•Regional Domain. This is the region setting for the wireless adapter. The approved channels for the region are automatically scanned. Governments regulate the channels used for wireless transmission. Operating the wireless adapter in a different region might violate local laws.•Driver Version. The wireless adapter driver version. •Hardware Version. The hardware version of the wireless USB adapter.•Driver Date. The wireless adapter driver release date.•MAC Address. The MAC address of the adapter. The Media Access Control address is a unique 48-bit hardware address assigned to every network interface card. Some wireless networks restrict access based on a list of known MAC addresses. If you are communicating with such a network, you must provide the address shown here to the network administrator before you are allowed to connect. Restricting access by MAC address adds an obstacle against unwanted access to your network. However, unless you use data encryption security, the data broadcast over the wireless link is fully exposed.•IP Address. The IP address assigned to this adapter.•Smart Wireless Utility. The version and release date of the Smart Wizard.Figure 2-12

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual2-17v1.0, December 2007Advanced SettingsYou can use the Advanced Settings screen to configure the preamble (GHz) that the adapter uses. The available settings are Auto, 2.4 GHz, and 5 GHz. You can use the 5GHz range to avoid interference in the 2.4GHz range. The 2.4GHz range is commonly used by cordless telephones. By changing the preamble setting, you have the option to connect to the following types of wireless networks.• 2.4 GHz + 5GHz. Connect to both 2.4GHz and 5GHz access points, up to 300 Mpbs.• 2.4 GHz only. Connect only to 2.4GHz access points, up to 300 Mpbs.• 5 GHz only. Connect only to 5 GHz access points, up to 300 Mpbs.• 2.4 GHz. Connect to 802.11b/g access points, up to 54 Mbps.• 5 GHz. Connect to 802.11a access points, up to 54 Mbps.To change the preamble (GHz) setting:1. On the Settings tab, click the Advanced Settings button to display the following screen:2. In the Advanced section of the screen, select the setting that you want from the drop-down list.Note: The default settings for the Fragmentation Threshold field and RTS/CTS Threshold field usually work fine. Do not change them unless you have a specific reason to do so.Figure 2-13

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual2-18v1.0, December 2007Changing the setting in the Preamble field affects which options are available in the Wireless Mode section of this screen. You can change the preamble for better throughput if you experience interference, such as from a cordless telephone. Many cordless phones use 2.4 GHz, but some use 5 GHz or 6 GHz.•Auto. Up to 300 Mbps (2.4 GHz and 5 GHz).•2.4 GHz. Use a 2.4 GHz preamble.•Long. Use a long preamble for 5 GHz networks.3. Click OK.

3-1v1.0, December 2007Chapter 3 Wireless Network PerformanceThis chapter explains how to use your RangeMax Dual Band Wireless-N USB Adapter WNDA3100 to connect to your wireless local area network (WLAN) and how to set up wireless security for the wireless USB adapter so that it matches the wireless security settings for your network. Optimizing Wireless PerformanceThe speed and operating distance or range of your wireless connection can vary significantly based on the location of the wireless router. You should choose a location for your router that will maximize the network speed.The following list describes how to optimize wireless router performance.• Identify critical wireless links.If your network has several wireless devices, decide which wireless devices need the highest data rate, and locate the router near them. Many wireless products have automatic data-rate fallback, which allows increased distances without losing connectivity. This also means that devices that are farther away mighty be slower. Therefore, the most critical links in your network are those where the traffic is high and the distances are great. Optimize those first. • Choose placement carefully. For best results, place your router:– Near the center of the area in which your computers will operate.– In an elevated location such as a high shelf where the wirelessly connected computers have line-of-sight access (even if through walls).• Avoid obstacles to wireless signals.– Keep wireless devices at least two feet from large metal fixtures such as file cabinets, refrigerators, pipes, metal ceilings, reinforced concrete, and metal partitions.– Keep the devices away from large amounts of water such as fish tanks and water coolers.• Reduce interference.Avoid windows unless communicating between buildings.Place wireless devices away from various electromagnetic noise sources, especially those in the 2400–2500 MHz frequency band. Common noise-creating sources are:

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual3-2v1.0, December 2007– Computers and fax machines (no closer than 1 foot)– Copying machines, elevators, and cell phones (no closer than 6 feet)– Microwave ovens (no closer than 10 feet)• Choose your settings.– Use a scanning utility to determine what other wireless networks are operating nearby, and choose an unused channel.– Turn off SSID Broadcast, and change the default SSID. Other nearby devices might automatically try to connect to your network several times a second, which can cause significant performance reduction. Optimizing Your Network BandwidthThe speed of network connections depends on the type of equipment that you use. Try to use high-speed technologies for network connections with the heaviest traffic to avoid lower-speed bottlenecks in the path. The following figure shows a home network that includes many different connection speeds.Figure 3-1

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual3-3v1.0, December 2007In the network shown in the previous figure, the two PCs with gigabit (1000 Mbps) Ethernet adapters have a gigabit connection through the router to the storage server. With a high-speed router this connection allows for extremely fast backups or quick access to large files on the server. The PC connected through a pair of Powerline HD adapters is limited to the 200 Mbps speed of the Powerline HD connection. Although any of the links in this example would be sufficient for high-traffic applications such as streaming HD video, the use of older devices such as 10 Mbps Ethernet or 802.11b wireless would create a significant bottleneck.In planning your network, think about which tasks will have the heaviest traffic flow between them. Examples are:• A media center in one room streaming high-definition video from a server in another room• A storage device that is used for backing up your computersOverview of Home and Small Office Networking TechnologiesCommon connection types and their speed and security considerations are:•Broadband InternetYour Internet connection speed is determined by your modem type, such as ADSL or cable modem, as well as the connection speed of the sites to which you connect, and general Internet traffic. ADSL and cable modem connections are asymmetrical, meaning they have a lower data rate to the Internet (upstream) than from the Internet (downstream). Keep in mind that when you connect to someone else who also has an asymmetrical connection, the data rate between your sites is limited by each side’s upstream data rate. A typical residential ADSL or cable modem connection provides a downstream throughput of about 1 to 3 megabits per second (Mbps). Newer technologies such as ADSL2+ and Fiber to the Home (FTTH) l increase the connection speed to tens of Mbps.•WirelessA high-speed wireless router can provide a wireless data throughput of up to 300 Mbps using technology called multiple-input multiple-output (MIMO), in which multiple antennas transmit multiple streams of data. The use of multiple antennas also provides excellent range and coverage. With the introduction of the newer WPA and WPA2 encryption and authentication protocols, wireless security is extremely strong.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual3-4v1.0, December 2007To get the best performance, use newer adapters such as RangeMax adapters for your computers. A high-speed router might be compatible with older 802.11b and 802.11g adapters, but the use of these older wireless technologies in your network can result in lower throughput overall (typically less than 10 Mbps for 802.11b and less than 40 Mbps for 802.11g). In addition, many older wireless products do not support the latest security protocols, WPA and WPA2.•PowerlineFor connecting rooms or floors that are blocked by obstructions or are distant vertically, consider networking over your building’s AC wiring. NETGEAR’s Powerline HD family of products delivers up to 200 Mbps to any outlet, while the older-generation XE family of products delivers 14 Mbps or 85 Mbps. Data transmissions are encrypted for security, and you can configure an individual network password to prevent neighbors from connecting.The Powerline HD family of products can coexist on the same network with older-generation XE family products or HomePlug 1.0 products, but they are not interoperable with these older products.•Wired EthernetAs Gigabit Ethernet ports become common on newer computers, wired Ethernet remains a good choice for speed, economy, and security. Gigabit Ethernet can extend up to 100 meters with twisted-pair wiring of CAT-5e or better. A wired connection is not susceptible to interference, and eavesdropping would require a physical connection to your network.Assessing Your Speed RequirementsBecause your Internet connection is likely to operate at a much lower speed than your local network, faster local networking technologies might not improve your Internet experience. However, many emerging home applications require high data rates. For example:• Streaming HD video requires 10 to 30 Mbps per stream. Because latency and packet loss can disrupt your video, plan to provide at least twice the capacity you need.• Streaming MP3 audio requires less than 1 Mbps per stream and does not strain most modern networks. Like video, however, streaming audio is also sensitive to latency and packet loss, so a congested network or a noisy link can cause problems.Note: Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, can lower actual data throughput rate.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual3-5v1.0, December 2007• Backing up computers over the network has become popular due to the availability of inexpensive mass storage. Table 3-1 shows the time to transfer 1 gigabyte (1 GB) of data using various networking technologies.Table 3-1. Theoretical Transfer Time for 1 Gigabyte Network Connection Theoretical Raw Transfer TimeGigabit Wired Ethernet 8 secondsRangeMax Duo Wireless-N 26 secondsPowerline HD 40 seconds100 Mbps Wired Ethernet 80 seconds802.11g wireless 150 seconds802.11b wireless 700 seconds10 Mbps Wired Ethernet 800 secondsCable Modem (3 Mbps) 2700 secondsAnalog Modem (56 kbps) 144,000 seconds (40 hours)

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual3-6v1.0, December 2007

4-1v1.0, December 2007Chapter 4 TroubleshootingThis chapter provides information about troubleshooting your RangeMax Dual Band Wireless-N USB Adapter WNDA3100. For information about connecting to wireless networks and the Internet, see “Basic Setup” in Chapter 1.Troubleshooting TipsUse the following information to solve common problems you may encounter. Also, refer to the knowledge base on the NETGEAR website at http://www.netgear.com/support/main.asp.Table 4-1. Troubleshooting TipsProblem ActionThe LED is not lit. The WNDA3100 is not connected to the USB port correctly or the WNDA3100 software is not loaded. • Remove and reinsert the WNDA3100.• Check the Windows device manager to see if the WNDA3100 is recognized and enabled. Reload the WNDA3100 software, if necessary.• Try to install the WNDA3100 in a different USB slot on your system if one is available.The LED blinks, but the WNDA3100 is not connected to an access point.The WNDA3100 is trying to connect to an access point, but cannot connect. • The access point might not be powered on. • The access point and the WNDA3100 are not configured with the same wireless parameters. Check the SSID and wireless security settings.I cannot connect to an access point. The access point is available, and there is good signal strength.• If the access point is WPA-PSK protected, you need the correct WPA-PSK passphrase. Otherwise, the WNDA3100 is still connected to the previous access point, and you cannot change to the WPA-PSK access point.• If the access point is WEP protected (either 64- or 128- bit encryption), you are prompted to enter the WEP encryption security information.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual4-2v1.0, December 2007Throughput is only 54 Mbps or only 14 Mbps.The RangeMax Dual Band Wireless-N USB Adapter WNDA3100 can operate at faster speeds. • At 54 Mbps you are probably connecting to a standard 802.11g network. See Chapter 3, “Wireless Network Performance”.• If you do not have a USB 2.0 port on your PC, the throughput is limited to the 14 Mbps of the USB 1.1 standard.The Smart Wizard keeps asking me to save settings.If you change the settings, the Smart Wizard offers you the chance to save the changes. To avoid this prompt, simply click Apply before you close the Smart Wizard.Two WNDA3100 icons are in the system tray.You have an older software version installed on your system and it needs to be removed. See “Removing the WNDA3100 Software” in Chapter 1 or “Upgrading the WNDA3100 Software” in Chapter 1.I can connect to the access point, but not to the other computers on the network or to the Internet.This could be a physical layer problem or a network configuration problem.1. Check to make sure that the access point is physically connected to the Ethernet network.2. Make sure that the IP addresses and the Windows networking parameters are all configured correctly. See the link to “Internet Networking and TCP/IP Addressing:” in Chapter B.3. Restart the cable or DSL modem, router, access point, and computer.Ho can I view the IP address for the wireless USB adapter?To view the RangeMax Dual Band Wireless-N USB Adapter WNDA3100 IP address, click the WNDA3100 icon to open the Smart Wizard. Then check the IP address in the About page.No IP address is assigned to the RangeMax Dual Band Wireless-N USB Adapter WNDA3100.This can occur if you upgraded your RangeMax Dual Band Wireless-N USB Adapter WNDA3100 software and did not reboot your system. • Either restart your computer, or connect to a different access point.• It does not usually help to shut down the Smart Wizard or disable or enable the wireless USB adapter.Table 4-1. Troubleshooting Tips (continued)Problem Action

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual4-3v1.0, December 2007Ad Hoc Mode Is Not Working CorrectlyYou must click the Initiate Ad Hoc button before you click Apply. Here is how you start an Ad Hoc network:1. Fill in the Network Name (SSID) field.2. Select the Computer-to-Computer (Ad Hoc) network type.3. Click Initiate Ad Hoc.4. Accept the default settings, or make your changes and click OK.5. Click Apply.Windows XP Occasional Connection Problems Windows XP users who apply Windows XP Hotfix (SP2) Q815485 from the Windows XP Update Service might not be able to connect to the Internet, might have dropped wireless connections, or both when using the RangeMax Dual Band Wireless-N USB Adapter WNDA3100. You can delete this Hotfix from the Add or Remove Programs utility in the Control Panel.To delete Windows XP Hotfix (SP2) Q815485:1. Select Start > Control Panel > Add/Remove Programs. 2. Select Windows XP Hotfix (SP2) Q815485, and then click Remove.• You might receive an error message that states that some program on the computer may not work correctly if the update is removed. • You can ignore this error message, and then click Yes to remove the update. 3. Restart your computer, and rerun the Smart Display Setup Wizard. This should solve your connection issue. You can restore this hotfix by following this link:http://microsoft.com/downloads/details.aspx?FamilyId=009D8425-CE2B-47A4-ABEC-274845DC9E91&displaylang=enNote: Be sure that all computers in your Ad Hoc network are configured with static IP addresses in the same subnet.

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual4-4v1.0, December 2007

A-1v1.0, December 2007Appendix A Technical Specifications and FactoryDefault SettingsTechnical SpecificationsThe following table provides technical specifications for the wireless USB adapter. Antenna 2 integrated internal wireless antennasStandards 802.11n draft 2.0, 802.11g, 802.11b, 802.11aRadio Data Rate 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, 08, 140, 246, and 300 Mbps (Auto Rate Sensing)Frequency 2.4 GHz to 2.4835GHz, 5.150-5.250GHz, 5.725-5.825GHzPower 5V Bus poweredEmissions FCC, CEBus interface USB 2.0Provided drivers Microsoft Vista, Windows XPOperating Environment Operating temperature: 0 to 40° CEncryption 40-bit (also called 64-bit) and 128-bit WEP data encryption, and WPA-PSKWarranty Limited 1-year warranty

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User ManualA-2v1.0, December 2007Factory Default SettingsThe following table lists the default settings of your wireless USB adapter.Feature DescriptionSmart Wizard EnabledWirelessWireless Communication EnabledWireless Network Name (SSID) Any (will connect to first wireless network that responds)Security DisabledNetwork Type InfrastructureTransmission Speed Autoaa. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.Country/Region United States (varies by region)Operating Mode 802.11n, 802.11g, 802.11b, 802.11aData Rate Up to 300 Mbps

B-1v1.0, December 2007Appendix B Related DocumentsThis appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product.Document LinkWindows XP and Vista Wireless Configuration Utilities Application Notehttp://documentation.netgear.com/reference/enu/winzerocfg/index.htm Internet Networking and TCP/IP Addressing: http://documentation.netgear.com/reference/enu/tcpip/index.htmWireless Communications: http://documentation.netgear.com/reference/enu/wireless/index.htmPreparing a Computer for Network Access: http://documentation.netgear.com/reference/enu/wsdhcp/index.htmVirtual Private Networking (VPN): http://documentation.netgear.com/reference/enu/vpn/index.htmGlossary: http://documentation.netgear.com/reference/enu/glossary/index.htm

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User ManualB-2v1.0, December 2007

Navigation menu