Netgear orporated 08100080 RangeMax Wireless-N ExpressCard Adapter User Manual FullManual

Netgear Incorporated RangeMax Wireless-N ExpressCard Adapter FullManual

UserManual.wiki >

Netgear orporated >

08100080 User Manual

Manual

202-10259-05 June 2008NETGEAR, Inc.4500 Great America Parkway Santa Clara, CA 95054 USANETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual

v1.0, June 2008iiiThis device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. For products available in the USA market, only channels 1through 11 can be operated. Selection of other channels is not available.FCC CautionAny changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.FCC RF Radiation Exposure and SAR StatementsSAR Statement The NETGEAR RangeMax Wireless-N ExpressCard WN711 has been tested for body-worn Specific Absorption Rate (SAR) compliance. The FCC has established detailed SAR requirements and has established that these requirements have been met while installed in a host notebook computer. RF Exposure InformationThe radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to the requirements as set forth in CFR 47 Sections, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves. Canadian Department of Communications Industry Canada (IC) NoticeThis Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Cet appareil numérique de la classe B est conforme à la norme NMB-003 et CNR-210 du Canada. Europe – EU Declaration of Conformity A printed copy of the EU Declaration of Conformity certificate for this product is provided in the WN711 product package. Česky [Czech][NETGEAR Inc.] tímto prohlašuje, že tento [NETGEAR RangeMax Wireless-N ExpressCard WN711] je ve shode se základními požadavky a dalšími príslušnými ustanoveními smernice 1999/5/ES.Dansk [Danish]Undertegnede [NETGEAR Inc.] erklærer herved, at følgende udstyr [NETGEAR RangeMax Wireless-N ExpressCard WN711] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.Deutsch [German]Hiermit erklärt [NETGEAR Inc.], dass sich das Gerät [NETGEAR RangeMax Wireless-N ExpressCard WN711] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.Eesti [Estonian]Käesolevaga kinnitab [NETGEAR Inc.] seadme [NETGEAR RangeMax Wireless-N ExpressCard WN711] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.

v1.0, June 2008ivEnglish Hereby, [NETGEAR Inc.], declares that this [NETGEAR RangeMax Wireless-N ExpressCard WN711] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Español [Spanish]Por medio de la presente [NETGEAR Inc.] declara que el [NETGEAR RangeMax Wireless-N ExpressCard WN711] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.Eλληνική [Greek]ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [NETGEAR Inc.] ΔΗΛΩΝΕΙ ΟΤΙ [NETGEAR RangeMax Wireless-N ExpressCard WN711] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.Français [French]Par la présente [NETGEAR Inc.] déclare que l'appareil [NETGEAR RangeMax Wireless-N ExpressCard WN711] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.Italiano [Italian]Con la presente [NETGEAR Inc.] dichiara che questo [NETGEAR RangeMax Wireless-N ExpressCard WN711] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.Latviski [Latvian]Ar šo [NETGEAR Inc.] deklarē, ka [NETGEAR RangeMax Wireless-N ExpressCard WN711] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.Lietuvių [Lithuanian] Šiuo [NETGEAR Inc.] deklaruoja, kad šis [NETGEAR RangeMax Wireless-N ExpressCard WN711] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.Nederlands [Dutch]Hierbij verklaart [NETGEAR Inc.]. dat het toestel [NETGEAR RangeMax Wireless-N ExpressCard WN711] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.Malti [Maltese]Hawnhekk, [NETGEAR Inc.], jiddikjara li dan [NETGEAR RangeMax Wireless-N ExpressCard WN711] jikkonforma mal-htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.Magyar [Hungarian]Alulírott, [NETGEAR Inc.] nyilatkozom, hogy a [NETGEAR RangeMax Wireless-N ExpressCard WN711] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.Polski [Polish]Niniejszym [NETGEAR Inc.] oświadcza, że [NETGEAR RangeMax Wireless-N ExpressCard WN711] jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.Português [Portuguese][NETGEAR Inc.] declara que este [NETGEAR RangeMax Wireless-N ExpressCard WN711] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.Slovensko [Slovenian][NETGEAR Inc.] izjavlja, da je ta [NETGEAR RangeMax Wireless-N ExpressCard WN711] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.Slovensky [Slovak][NETGEAR Inc.] týmto vyhlasuje, _e [NETGEAR RangeMax Wireless-N ExpressCard WN711] spĺňa základné po_iadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.

v1.0, June 2008vProduct and Publication DetailsSuomi [Finnish][NETGEAR Inc.] vakuuttaa täten että [NETGEAR RangeMax Wireless-N ExpressCard WN711] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.Svenska [Swedish]Härmed intygar [NETGEAR Inc.] att denna [NETGEAR RangeMax Wireless-N ExpressCard WN711] står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.Model Number: WN711Publication Date: June 2008Product Family: Wireless AdapterProduct Name: NETGEAR RangeMax Wireless-N ExpressCard WN711Home or Business Product: HomeLanguage: EnglishPublication Part Number: 202-10259-05

v1.0, June 2008vi

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manualviiiv1.0, June 2008Wireless Security ..........................................................................................................2-14Wireless Network Name (SSID) and Security Settings ..........................................2-15Setting Up WEP Encryption Security .....................................................................2-16Setting up WPA2-PSK Security ..............................................................................2-17Setting Up WPA-PSK Security ...............................................................................2-18Advanced Settings ........................................................................................................2-19Statistics Tab .................................................................................................................2-20About Tab .....................................................................................................................2-21Chapter 3 Wireless Network PerformanceOptimizing Wireless Performance ..................................................................................3-1Optimizing Your Network Bandwidth ..............................................................................3-2Overview of Home and Small Office Networking Technologies ......................................3-3Assessing Your Speed Requirements ......................................................................3-4Chapter 4 TroubleshootingTroubleshooting Tips ......................................................................................................4-1Ad Hoc Mode Is Not Working Correctly ..........................................................................4-2Appendix A Default Configuration Settings and Technical SpecificationsDefault Configuration Settings ....................................................................................... A-1Technical Specifications ................................................................................................. A-2Appendix B Related Documents

ixv1.0, June 2008About This ManualThe NETGEAR® RangeMax™ Wireless-N ExpressCard WN711 User Manual describes how to install, configure and troubleshoot the NETGEAR RangeMax Wireless-N ExpressCard WN711. The information in this manual is intended for readers with intermediate computer and Internet skills.Conventions, Formats, and ScopeThe conventions, formats, and scope of this manual are described in the following paragraphs:•Typographical Conventions. This manual uses the following typographical conventions::•Formats. This manual uses the following formats to highlight special messages:•Scope. This manual is written for the Wireless Express Card according to these specifications:Italic Emphasis, books, CDs, file and server names, extensionsBold User input, IP addresses, GUI screen textFixed Command prompt, CLI textitalic URL linksNote: This format is used to highlight information of importance or special interest.Tip: This format is used to highlight a procedure that will save time or resources.Product Version NETGEAR RangeMax Wireless-N ExpressCard WN711Manual Publication Date June 2008

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manualxv1.0, June 2008For more information about network, Internet, firewall, and VPN technologies, see the links to the NETGEAR website in Appendix B, “Related Documents”.”How to Use This ManualThe HTML version of this manual includes the following:• Buttons, and , for browsing forward or backward through the manual one page at a time.• A button that displays the table of contents and a button that displays an index. Double-click a link in the table of contents or index to navigate directly to where the topic is described in the manual.• A button to access the full NETGEAR, Inc. online knowledge base for the product model.• Links to PDF versions of the full manual and individual chapters.How to Print This ManualTo print this manual, you can choose one of the following options, according to your needs.•Printing a page from HTML. Each page in the HTML version of the manual is dedicated to a major topic. Select File > Print from the browser menu to print the page contents. •Printing from PDF. Your computer must have the free Adobe Acrobat reader installed in order to view and print PDF files. The Acrobat reader is available on the Adobe Web site at http://www.adobe.com.– Printing a PDF chapter. Use the PDF of This Chapter link at the top left corner of any page.• Click the PDF of This Chapter link at the top left corner of any page in the chapter you want to print. The PDF version of the chapter you were viewing opens in a browser window. • Click the print icon in the upper left of your browser window.Note: Product updates are available on the NETGEAR, Inc. website athttp://www.netgear.com/support.

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manualxiv1.0, June 2008–Printing a PDF version of the complete manual. Use the Complete PDF Manual link at the top left corner of any page.• Click the Complete PDF Manual link at the top left corner of any page in the manual. The PDF version of the complete manual opens in a browser window. • Click the print icon in the upper left corner of your browser window. Tip: If your printer supports printing two pages on a single sheet of paper, you can save paper and printer ink by selecting this feature.

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manualxiiv1.0, June 2008

1-1v1.0, June 2008Chapter 1Basic SetupThe NETGEAR® RangeMax™ Wireless-N ExpressCard WN711 User Manual lets you connect a computer to wireless networks. It is designed for laptop computers running Microsoft Windows. For information about product features and compatible NETGEAR products, see the NETGEAR website at http://www.netgear.com.This chapter describes how to install your Wireless Express Card and set up basic wireless connectivity on your wireless local area network (WLAN). Advanced wireless network settings are covered in Chapter 2, “Network Connections and Wireless Security” in this manual.What You Need Before You BeginYou must verify that your computer meets the minimum system requirements and identify the wireless network settings of the wireless network where you will connect before you can set up your wireless Express Card and connect. Verify System RequirementsBefore installing the Wireless Express Card, make sure that these minimum requirements have been met. You must have a computer with:• A Pentium 300 MHz or higher compatible processor with an available Express Card slot.•A CD drive.• 105 MB of free hard disk space.• Microsoft Vista, Windows XP Home, or XP ProfessionalSome versions of Windows might ask for the original Windows operating system installation files to complete the installation of the WN711 driver software.Observe Wireless Location and Range GuidelinesComputers can connect over wireless networks indoors at a range that can vary significantly based on the location of the computer with the Wireless Express Card. For best results, avoid potential sources of interference, such as: • Large metal surfaces

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual1-2v1.0, June 2008• Microwave ovens• 2.4 GHz cordless phonesIn general, wireless devices can communicate through walls. However, if the walls are constructed with concrete, or have metal or metal mesh, the effective range decreases if such materials are between the devices. For more detailed information, see Chapter 3, “Wireless Network Performance”.What Is in the BoxThe product package should contain the following items:• NETGEAR RangeMax Wireless-N ExpressCard WN711• Installation Guide•Resource CD, including:– The Smart Wizard Installation Assistant– This manual• Warranty and Support information cardIf any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair.Default Wireless SettingsIf this is a new wireless network installation, use the factory default settings to set up the network and verify wireless connectivity. If this is an addition to an existing wireless network, you need the wireless network and wireless security settings that are already defined.

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual1-3v1.0, June 2008Your Wireless Express Card factory default basic settings are: • Network Name Service Set Identifier (SSID): Any• Network Mode (Infrastructure or Ad Hoc): Infrastructure• Data security WEP, WPA2-PSK, or WPA-PSK encryption: DisabledInstallationThe instructions in this section explain how to install the Wireless Express Card to connect to a network with an access point or router. Wireless security, advanced settings, and Computer-to-Computer (Ad Hoc) instructions are covered in Chapter 2, “Network Connections and Wireless Security”.To install the Wireless Express Card:1. First, install the WN711 software.Insert the Resource CD. If the CD main screen does not display, double-click Autorun.exe on the CD.a. Click Install the Software. The Check for Updates screen displays. Note: In order for the Wireless Express Card to communicate with a wireless access point or wireless adapter, all devices must be set up to use the same wireless network name (SSID).Figure 1-1

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual1-5v1.0, June 20083. Set up the wireless adapter with the NETGEAR Smart Wizard (recommended) or the Windows configuration utilities.•NETGEAR Smart Wizard. Reveals more information about each network and makes it easier to troubleshoot network connection problems. See “Smart Wizard Status Bar” on page 1-8 and “Connecting to Wireless Networks and the Internet” on page 1-7.•Windows configuration utilities. See the Windows documentation or click the link to the online document “Using Microsoft Vista and Windows XP to Manage Wireless Network Connections” in Appendix B.4. Use the Smart Wizard to set up your Wireless Express Card.When prompted, click Next to let the wizard help you connect to a network (recommended).Figure 1-3Figure 1-4

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual1-7v1.0, June 2008The WN711 icon appears in the system tray and on the desktop. The wizard initiates your wireless connection. It could take up to a minute to establish your wireless connection. The Smart Wizard Settings screen displays.6. Use the status bar to verify your wireless connectivity. See “Connecting to Wireless Networks and the Internet” on page 1-7.Connecting to Wireless Networks and the InternetThe Wireless Express Card has indicators in three locations that show the status of your connection to a wireless network and to the Internet:• Icon: After you install the software, this icon appears on the desktop and in the lower right of the Windows task bar. It is color coded to show the status of the connection. See “Smart Wizard Status Bar” on page 1-8.•Smart Wizard status bar. Click the WN711 icon to open the Smart Wizard. The status bar at the bottom of the screen shows details about your wireless and Internet connection. •Wireless Express Card LED. The LED on the Wireless Express Card shows the network connection. Solid indicates a connection. The LED blinks when the Wireless Express Card is transferring data.Figure 1-6

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual1-8v1.0, June 2008WN711 Icon ColorsThe WN711 icon is on the desktop and in the Windows system tray. The system tray is located on one end of the taskbar in the Microsoft Windows desktop. Smart Wizard Status BarClick the icon to open the Smart Wizard so that you can view the status bar. The Smart Wizard Settings tab displays. The status bar is located at the bottom of the Settings tab.The following table describes how to interpret the Smart Wizard status bar.Color Condition DescriptionRed The Wireless Express Card has no connection to any other wireless node.The Wireless Express Card cannot link to any other wireless node, or the link is lost. Check your configuration, or try moving to a location where the wireless signal quality is better.Yellow The Wireless Express Card has a connection with another wireless node.The wireless link is weak. You might need to move to a better spot, such as closer to the wireless access point. Also, look for possible interference such as a 2.4 GHz cordless phone or large metal surface.Green The Wireless Express Card has a connection with another wireless node.The Wireless Express Card has established good communication with an access point, and the signal quality is strong.Figure 1-7Understanding the Status BarWireless network Identifies which wireless network you have joined.Security • Locked. Security enabled.•Unlocked. Security not enabled.WirelessnetworkConnection statusSecurityJoin a NetworkChannel ThroughputSignalstrength

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual1-9v1.0, June 2008To optimize throughput, connect to a network with a high-speed router or access point, and a high-speed Internet connection. For more information about optimizing wireless performance, and network bandwidth, see “Optimizing Wireless Performance” on page 3-1 and “Optimizing Your Network Bandwidth” on page 3-2The connection status is useful in isolating a problem. For example, if you are connected to a router, but not to the Internet, then check the router’s Internet connection. If you right-click the system tray icon, you can disable the Internet notification feature by clearing the check mark enabling notification, as shown in the following figure. If you do so, then only the IP address is shown.In Vista, there is one more option: Enable NETGEAR Smart Wizard. If you clear the check mark for Enable NETGEAR Smart Wizard, the NETGEAR Smart Wizard will be disabled, and you will need to set up the wireless adapter with Vista Auto configuration.Channel The wireless channel used by the network. If many wireless networks in your area use the same channel, they can interfere with one another.Throughput Wireless throughput measured in mega-bits per second. Signal strength More dots indicates a stronger signal. Usually, you experience higher throughput when the signal is strongest.Join a Network Click Join a Network to open the Connection Wizard.Connection statusIdentifies the status of your network connection.•Connected to Internet. The Internet connection is OK.•Connected to Router. The wireless connection to the router is OK, but the router is not connected to the Internet.•169.254.x.x or ___.___.___.___ . The wireless connection to the router is OK, but there is a problem with the router. See Chapter 4, “Troubleshooting”.Figure 1-8Figure 1-9Understanding the Status Bar (continued)

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual1-10v1.0, June 2008Removing the WN711 SoftwareIf necessary, you can remove the wireless adapter software in these ways:• From the Windows taskbar, click Start, and select the NETGEAR WN711 Smart Wizard program group Uninstall option, and follow the screen prompts.• For Windows XP, from the Windows taskbar, click the Start button, select Control Panel, Add or Remove Program, and follow the screen prompts. • For Vista, from the Windows taskbar, click the Start button, select Control Panel, Programs and Features. Then select the NETGEAR WN711 wireless adapter option, and follow the screen prompts.Upgrading the WN711 SoftwareUpgrades might be available at the NETGEAR website. To install an upgrade:1. Write down the settings for any profiles that you want to save. They will not be retained.2. Download the upgrade from the NETGEAR Support page.3. Remove the WN711 software from your computer. 4. Remove the Wireless Express Card adapter from your computer, and if prompted restart your computer.5. Run the installer that you downloaded (the file ends in .exe).6. Follow the installer instructions, and if prompted, restart your computer.

2-1v1.0, June 2008Chapter 2Network Connections and Wireless SecurityThis chapter explains how to use your Wireless Express Card to connect to your wireless local area network (WLAN) and how to set up wireless security for the Wireless Express Card so that it matches the wireless security settings for your network. If you chose the Windows XP Zero configuration during installation, and now you want to use the Smart Wizard, then you need to disable the Windows utility. If you are working with the Vista configuration utility, click the link to the online document “Using Microsoft Vista and Windows XP to Manage Wireless Network Connections” in Appendix B. Disabling the Windows XP Zero Configuration UtilityTo disable the Windows Zero Configuration utility:1. Insert the wireless adapter into an Express Card slot in your computer.2. From the Windows taskbar, click Start, select Control Panel, Network Connections. 3. On the Network Connections screen, right-click Wireless Network Connection, and select Properties. 4. Click the Wireless Networks tab. Then clear the Use Windows to configure my wireless settings check box.Figure 2-1

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-2v1.0, June 2008Understanding the Smart WizardThese instructions explain how to use the NETGEAR WN711 Smart Wizard to change the Wireless Express Card wireless settings. When you have installed the software from the Resource CD, the icon appears on your desktop and in the Windows system tray. The Windows system tray is located on the Windows taskbar. You can either double-click this icon on the desktop, or click it in the system tray at any time, to use the Smart Wizard. This software automatically restarts when you reboot your computer. The Smart Wizard provides a complete and easy-to-use set of tools to:• View details about wireless networks in your area• Choose the network that you want to use• Configure wireless settings for your wireless connection• Save your wireless network settings in profiles• Remove or reinstall the wireless adapter softwareThe following sections in this chapter explain how to use the Smart Wizard. Viewing Wireless Networks in Your AreaYou can use the Networks tab to view all available wireless networks in your area. You can also scan to search for wireless networks and refresh the screen.To view information about wireless networks:1. Use the icon to open the Smart Wizard. The Settings tab displays.2. Click the Networks tab to view the following screen:

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-3v1.0, June 2008The screen shows the following information for each network scanned:•Network Name (SSID). The name assigned to a wireless network. This is the same as the SSID or ESSID setting. Note that as a security measure, some wireless access points do not broadcast their SSID. In such cases, the SSID field is blank even though the rest of the information is still displayed. •Channel. The channel determines which operating frequency will be used. •N. The router supports wireless N mode.•WPS. The access point supports WPS.•Security. Identifies whether the wireless network uses security settings such as WEP, WPA2-PSK, or WPA-PSK.•Signal. Identifies the signal strength of the communications.•MAC Address. Identifies the hardware address (MAC Address) of the wireless device broadcasting this information.•Mode. Identifies the type of wireless network — Access Point (Infrastructure) or Computer-to-Computer (Ad Hoc).The buttons located at the bottom of the Networks tab are:•Help. Display online help.•Join a Network. Join a network. See “Joining a Network” on page 2-4.•Connect. Connect to the network that you selected.•Scan. Check for wireless networks. Clicking Scan refreshes the screen.•Close. Close the Wizard.Figure 2-2You can click a columnheading to sort.If many networks usethe same channel theycan interfere with eachother.The status bar showsyour network connectionand Internet connection.

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-4v1.0, June 2008Joining a NetworkDuring installation, the wireless adapter either connects to a wireless access point or router, or lists the available networks to let you select a network. After installation you can use the Join a Network button or the Networks tab at any time to connect to another access point or router or to view the available networks and select one:• If none of the wireless access points or routers in the network support WPS, or if you prefer to manually select a network, see “Connecting to Wireless Networks and the Internet” on page 1-7.• If a wireless access point or router in the network supports Wi-Fi Protected Setup (WPS), see “Using WPS to Connect to a Wireless Network”.Depending on whether or not a wireless access point or router in the network supports Wi-Fi Protected Setup (WPS), the Smart Wizard presents different screens.To join a network:1. Use the icon to open the Smart Wizard. On the status bar, click Join a Network.2. If the Smart Wizard detects an access point or router with WPS, it displays the WPS screen. To connect manually, select No, and click Next.Note: Unless you are using WPS, make sure that you know the security settings for the network that you want to use. For example, if WEP is used, then you need to know the WEP key. If you use secure networks frequently, set up profiles for each network with the wireless network and security settings.Figure 2-3

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-6v1.0, June 2008Using a WPS Button to Connect to a Wireless Access Point or RouterTo join a network using a PBC:1. Use the icon to open the Smart Wizard. On the status bar, click Join a Network. The adapter detects a network with WPS:2. Select Yes to use WPS, and then click Next.3. Select Yes (to use a push button), and then click Next.4. On the access point or router that you have selected, open its Smart Wizard or configuration utility.5. Select Add WPS Client. On the Add WPS Client screen, select Push Button.6. To start the WPS process, either press the push button on the access point or router, or click the icon on the Add WPS Client screen.7. Within 2 minutes, return to the Smart Wizard screen for the WN711, and click the icon. The Smart Wizard initiates your wireless connection.8. You can use the status bar to verify your network connection. For more information, see “Smart Wizard Status Bar” on page 1-8. Click Close to exit the Smart Wizard.9. Close the Smart Wizard or configuration utility for the access point or router.Figure 2-5

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-7v1.0, June 2008Using the Router PIN to Connect to a Wireless Access Point or RouterIf you know the router PIN, then you can enter it to to connect to the router with WPS. If you do not know the router PIN, then the wireless adapter can generate a PIN to connect to the router. See “Generating a PIN to Connect to a Wireless Access Point or Router” on page 2-8.To connect to a WPS router or access point using its PIN:1. Use the icon to open the Smart Wizard. On the status bar, click Join a Network. (or click the Networks tab and select a network).The wireless adapter detects the network with WPS.2. Select Yes to use WPS, and then click Next.3. Select No (to use a PIN), and then click Next.Figure 2-6Figure 2-7

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-8v1.0, June 20084. When prompted, enter the router PIN, and then click Next. The Smart Wizard initiates your wireless connection. Within 4 minutes it displays a message telling you whether or not it successfully connected to the WPS router or access point.5. You can use the Status Bar to verify your network connection. For more information, see “Smart Wizard Status Bar” on page 1-8. Click Close to exit the Smart Wizard.Generating a PIN to Connect to a Wireless Access Point or RouterThe wireless adapter can generate a PIN to connect to the router. This is useful if you do not know what the router PIN is. If you know the router PIN and want to enter it, see“Using the Router PIN to Connect to a Wireless Access Point or Router” on page 2-7. To generate a PIN and connect to a WPS wireless router or access point:1. Use the icon to open the Smart Wizard. On the status bar, click Join a Network (or click the Networks tab and select the network).The wireless adapter detects a network with WPS.2. Select Yes to use WPS, and then click Next.3. Select No (to use a PIN), and then click Next.Figure 2-8

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-13v1.0, June 20085. Verify wireless connectivity between your peer devices using ping:a. On the Windows taskbar, click the Start button, and select Run.b. Assuming that the target PC is configured with 192.168.0.1 as its IP address, type ping -t 192.168.0.1 and then click OK.c. This will cause a continuous ping to be sent to the device with the 192.168.0.1 static IP address. The ping response should change to reply.At this point the connection is established. Starting a Computer-to-Computer (Ad Hoc) Network Connection1. On the Settings tab of the Smart Wizard, select or type the network name (SSID).2. Select the Computer-to-Computer (Ad Hoc) network type.Figure 2-12Figure 2-13Note: If you cannot connect, see “Connecting to Wireless Networks and the Internet” in Chapter 1. If you have problems with accessing network resources, the Windows Client and File and Print Sharing software might not be installed and configured properly on your computers. Click the link to “TCP/IP Networking Basics” on page B-1.

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-14v1.0, June 20083. Click Initiate Ad Hoc. The Ad Hoc Setting screen displays:4. In the Start Ad Hoc drop-down list, select the wireless standard 802.11b, or 802.11g for your Ad Hoc computer-to-computer network.5. In the Channel drop-down list, Automatic should work. If there is interference with another wireless device, select a channel that is not being used by any other wireless networks near your wireless adapter. Use the Networks tab to view the channels in use in your area.6. Click OK.Wireless SecurityMany networks use wireless security to encrypt wireless data communications. If you try to connect to a network with wireless security, the Smart Wizard detects it. Before you can use that network, you must set up the Wireless Express Card with exactly the same kind of wireless security settings. The Wireless Express Card supports the following types of wireless security:• Wi-Fi Protected Access 2 Pre-Shared Key (WPA2-PSK)• Wi-Fi Protected Access Pre-Shared Key (WPA-PSK)• Wired Equivalent Privacy (WEP)For more information about wireless security, see the link to the online document “Wireless Networking Basics” in Appendix B. In addition to the wireless security features, networks should use LAN network security features such as requiring a user name and password to access the shared resources in the network.Figure 2-14Note: The channel number differs depending on the country. The connection speed automatically defaults to the highest speed.

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-15v1.0, June 2008Wireless Network Name (SSID) and Security SettingsPrint this page, fill in the configuration details, and keep the information in a safe place for future reference. For an existing wireless network, the person who set up the network can provide this information.•Network Name (SSID): The Service Set Identification (SSID) identifies the wireless local area network. Any (First available network) is the default wireless network name (SSID). You may customize it using up to 32 alphanumeric characters. Write your customized wireless network name (SSID) on the line below:Wireless network name (SSID). ______________________________ • If WEP authentication is used: –WEP Encryption key size. Select one: 64-bit or 128-bit. The encryption key size must be the same for the access point and the wireless adapter.–Data Encryption (WEP) keys. There are two methods for creating WEP data encryption keys. Whichever method you use, record the key values in the spaces below.•Passphrase method. ______________________________ These characters are case-sensitive. Enter a word or group of printable characters, and click the Generate Keys button. Not all wireless devices support the passphrase method.•Manual method. These values are not case-sensitive. For 64-bit WEP, enter 10 hex digits (any combination of 0–9 or a–f). For 128–bit WEP, enter 26 hex digits.Key 1: _____________________________ Key 2: _____________________________ Key 3: _____________________________ Key 4: _____________________________ • If WPA2-PSK or WPA-PSK authentication is used: Passphrase. ______________________________ These characters are case-sensitive. Enter a word or group of printable characters. When you use WPA-PSK, the other devices in the network will not connect unless they are set to WPA-PSK as well and are configured with the correct passphrase. Note: You must configure your Wireless Express Card with the SSID used by the wireless access point. Otherwise the Wireless Express Card and the access point will not be able to communicate with each other.

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-20v1.0, June 2008Statistics TabThe Statistics tab provides real-time and historical trend information about the data traffic and performance of your wireless adapter.The Statistics tab shows the following information:•Transmit/Receive Performance (%). A real-time graph identifying the total, receive, and transmit utilization as a percentage of the total possible. •Transmit, Receive, and Total (TxRx). Radio buttons let you select whether to display the transmit performance, the receive performance, or both in the same graph.•Transmit Statistics. Identifies transmit megabits per second (Mbps), transmit packets per second (Tx Packets/s), total transmitted packets, and transmit errors.•Receive Statistics. Identifies receive megabits per second (Mbps), receive packets per second (Rx Packets/s), total received packets, and reception errors.Figure 2-19

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-21v1.0, June 2008About TabThe About tab displays the current software version information.The following information is displayed in the About tab:•Regional Domain. This is the region setting for the wireless adapter. The approved channels for the region are automatically scanned. Governments regulate the channels used for wireless transmission. Operating the wireless adapter in a different region might violate local laws.•Driver Version. The wireless adapter driver version. •Driver Date. The wireless adapter driver release date.•MAC Address. The MAC address of the adapter. The Media Access Control address is a unique 48-bit hardware address assigned to every network interface card. Some wireless networks restrict access based on a list of known MAC addresses. If you are communicating with such a network, you must provide the address shown here to the network administrator before you can connect. Restricting access by MAC address adds an obstacle against unwanted access to your network. However, unless you use data encryption security, the data broadcast over the wireless link is fully exposed.•IP Address. The IP address assigned to this adapter.•Smart Wireless Utility. The version and release date of the Smart Wizard.Figure 2-20

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual2-22v1.0, June 2008

3-1v1.0, June 2008Chapter 3Wireless Network PerformanceThis chapter explains how to use your Wireless Express Card to connect to your wireless local area network (WLAN) and how to set up wireless security for the Wireless Express Card so that it matches the wireless security settings for your network. Optimizing Wireless PerformanceThe speed and operating distance or range of your wireless connection can vary significantly based on the location of the wireless router. You should choose a location for your router that will maximize the network speed.The following list describes how to optimize wireless router performance.• Identify critical wireless links. If your network has several wireless devices, decide which wireless devices need the highest data rate, and locate the router near them. Many wireless products have automatic data-rate fallback, which allows increased distances without loss of connectivity. This also means that devices that are farther away might be slower. Therefore, the most critical links in your network are those where the traffic is high and the distances are great. Optimize those first. • Choose placement carefully. For best results, place your router:– Near the center of the area in which your computers will operate.– In an elevated location such as a high shelf where the wirelessly connected computers have line-of-sight access (even if through walls).• Avoid obstacles to wireless signals.– Keep wireless devices at least 2 feet from large metal fixtures such as file cabinets, refrigerators, pipes, metal ceilings, reinforced concrete, and metal partitions.– Keep wireless devices away from large amounts of water such as fish tanks and water coolers.• Reduce interference. Avoid windows unless communicating between buildings.Place wireless devices away from various electromagnetic noise sources, especially those in the 2400–2500 MHz frequency band. Common noise-creating sources are:– Computers and fax machines (no closer than 1 foot)

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual3-2v1.0, June 2008– Copying machines, elevators, and cell phones (no closer than 6 feet)– Microwave ovens (no closer than 10 feet)• Choose your settings.– Use a scanning utility to determine what other wireless networks are operating nearby, and choose an unused channel.– Turn off SSID broadcast, and change the default SSID. Other nearby devices might automatically try to connect to your network several times a second, which can cause significant performance reduction. Optimizing Your Network BandwidthThe speed of network connections depends on the type of equipment that you use. Try to use high-speed technologies for network connections with the heaviest traffic to avoid lower-speed bottlenecks in the path. The following figure shows a home network that includes many different connection speeds.Figure 3-1

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual3-3v1.0, June 2008In the network shown in Figure 3-1, the two PCs with Gigabit (1000 Mbps) Ethernet adapters have a gigabit connection through the router to the storage server. With a high-speed router this connection allows for extremely fast backups or quick access to large files on the server. The PC connected through a pair of Powerline HD adapters is limited to the 200 Mbps speed of the Powerline HD connection. Although any of the links in this example would be sufficient for high-traffic applications such as streaming HD video, the use of older devices such as 10 Mbps Ethernet or 802.11b wireless would create a significant bottleneck.In planning your network, think about which tasks will have the heaviest traffic flow between them. Examples are:• A media center in one room streaming high-definition video from a server in another room• A storage device that is used for backing up your computersOverview of Home and Small Office Networking TechnologiesCommon connection types and their speed and security considerations are:•Broadband Internet. Your Internet connection speed is determined by your modem type, such as ADSL or cable modem, as well as the connection speed of the sites to which you connect, and general Internet traffic. ADSL and cable modem connections are asymmetrical, meaning they have a lower data rate to the Internet (upstream) than from the Internet (downstream). Keep in mind that when you connect to another site that also has an asymmetrical connection, the data rate between your sites is limited by each side’s upstream data rate. A typical residential ADSL or cable modem connection provides a downstream throughput of about 1 to 3 megabits per second (Mbps). Newer technologies such as ADSL2+ and Fiber to the Home (FTTH) increase the connection speed to tens of Mbps.•Wireless. A high-speed wireless router can provide a wireless data throughput of up to 300 Mbps using technology called multiple input, multiple-output (MIMO), in which multiple antennas transmit multiple streams of data. The use of multiple antennas also provides excellent range and coverage. With the introduction of the newer WPA and WPA2 encryption and authentication protocols, wireless security is extremely strong.To get the best performance, use newer adapters such as RangeMax adapters for your computers. A high-speed router might be compatible with older 802.11b and 802.11g adapters, but the use of these older wireless technologies in your network can result in lower throughput overall (typically less than 10 Mbps for 802.11b and less than 40 Mbps for 802.11g). In addition, many older wireless products do not support the latest security protocols, WPA and WPA2.

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual3-4v1.0, June 2008•Powerline. For connecting rooms or floors that are blocked by obstructions or are distant vertically, consider networking over your building’s AC wiring. NETGEAR’s Powerline HD family of products delivers up to 200 Mbps to any outlet, while the older-generation XE family of products delivers 14 Mbps or 85 Mbps. Data transmissions are encrypted for security, and you can specify an individual network password to prevent neighbors from connecting.The Powerline HD family of products can coexist on the same network with older-generation XE family products or HomePlug 1.0 products, but they are not interoperable with these older products.•Wired Ethernet. As Gigabit Ethernet ports become common on newer computers, wired Ethernet remains a good choice for speed, economy, and security. Gigabit Ethernet can extend up to 100 meters with twisted-pair wiring of CAT 5e or better. A wired connection is not susceptible to interference, and eavesdropping would require a physical connection to your network.Assessing Your Speed RequirementsBecause your Internet connection is likely to operate at a much lower speed than your local network, faster local networking technologies might not improve your Internet experience. However, many emerging home applications require high data rates. For example:• Streaming HD video requires 10 to 30 Mbps per stream. Because latency and packet loss can disrupt your video, plan to provide at least twice the capacity you need.• Streaming MP3 audio requires less than 1 Mbps per stream and does not strain most modern networks. Like video, however, streaming audio is also sensitive to latency and packet loss, so a congested network or a noisy link can cause problems.Note: Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, can lower actual data throughput rate.

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual3-5v1.0, June 2008• Backing up computers over the network has become popular due to the availability of inexpensive mass storage. Table 3-1 shows the time to transfer 1 gigabyte (GB) of data using various networking technologies.Table 3-1. Theoretical Transfer Time for 1 GigabyteNetwork Connection Theoretical Raw Transfer TimeGigabit wired Ethernet 8 secondsRangeMax NEXT Wireless-N 26 secondsPowerline HD 40 seconds100 Mbps wired Ethernet 80 seconds802.11g wireless 150 seconds802.11b wireless 700 seconds10 Mbps wired Ethernet 800 secondsCable modem (3 Mbps) 2700 secondsAnalog modem (56 kbps) 144,000 seconds (40 hours)

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual3-6v1.0, June 2008

4-1v1.0, June 2008Chapter 4TroubleshootingThis chapter provides information about troubleshooting your Wireless Express Card. For information about connecting to wireless networks and the Internet, see “Connecting to Wireless Networks and the Internet” on page 1-7.Troubleshooting TipsUse the following information to solve common problems you might encounter. Also, refer to the knowledge base on the NETGEAR website at http://www.netgear.com.Table 4-1. Troubleshooting TipsProblem ActionI cannot connect to an access point. The access point is available and there is good signal strength.• If the access point is WPA-PSK protected, you need the correct WPA-PSK passphrase. Otherwise, the WN711 will still be connected to the previous access point and you will not be able to change to the WPA-PSK access point.• If the access point is WEP protected (either 64 or 128 bit encryption), you will be prompted to enter the WEP encryption security information.Throughput is only 54 Mbps. The Wireless Express Card can operate at faster speeds. You are probably connecting to a standard 802.11g network. See Chapter 3, “Wireless Network Performance” for help in understanding how to get the best performance from your Wireless Express Card.The Smart Wizard keeps asking me to save settings.If you change the settings the Smart Wizard offers you the chance to save the changes. To avoid this prompt, simply click Apply before you close the Smart Wizard.Two WN711 icons are in the system tray. You have an older software version installed on your system and it needs to be removed. See “Removing the WN711 Software” on page 1-10 or “Upgrading the WN711 Software” on page 1-10.

NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual4-2v1.0, June 2008Ad Hoc Mode Is Not Working CorrectlyYou must click the Initiate Ad Hoc button before you click Apply. To start an Ad Hoc network:1. Fill in the Network Name (SSID) field.2. Select the Computer-to-Computer (Ad Hoc) network type.3. Click Initiate Ad Hoc.4. Accept the default settings or make your changes, and then click OK.5. Click Apply.I can connect to the access point, but not the other computers on the network or to the Internet.This could be a physical layer problem or a network configuration problem.1. Check to make sure that the access point is physically connected to the Ethernet network.2. Make sure that the IP addresses and the Windows networking parameters are all configured correctly. See the link to “TCP/IP Networking Basics” in Appendix B.3. Restart the cable or DSL modem, router, access point, and computer.How can I view the Wireless Express Card IP address?To view the Wireless Express Card IP address, click the WN711 icon to open the Smart Wizard. Then check the IP address in the About screen.No IP address is assigned to the Wireless Express Card.This might occur if you upgraded your Wireless Express Card software and did not reboot your system. • Either restart your computer, or connect to a different access point.• It does not usually help to shut down the Smart Wizard or disable and enable the card.Note: Make sure that all computers in your Ad Hoc network are configured with static IP addresses in the same subnet.Table 4-1. Troubleshooting Tips (continued)Problem Action

A-1v1.0, June 2008Appendix ADefault Configuration Settings and TechnicalSpecificationsDefault Configuration SettingsThe following table lists the default settings of your Wireless Adapter.Feature DescriptionSmart Wizard EnabledWirelessWireless Communication EnabledWireless Network Name (SSID) Any (first available network)Security DisabledNetwork Type InfrastructureTransmission Speed Autoaa. Maximum wireless signal rate (IEEE Standard 802.11n draft specification). Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.Country/Region United States (varies by region)Operating Mode 802.11n, 802.11g and 802.11bData Rate up to 270 Mbps

NETGEAR RangeMax Wireless-N ExpressCard WN711 User ManualA-2v1.0, June 2008Technical SpecificationsThe following table describes technical specifications for the NETGEAR RangeMax Wireless-N ExpressCard WN711. Antennas 2 separate PCB internal antennasStandards 802.11n, 802.11g, 802.11bRadio Data Rate 1, 2, 5.5, 6, 6.5, 9, 11, 12, 13, 13.5, 18, 19.5, 24, 26, 27, 36, 39, 40.5, 48, 52, 54, 58.5, 65, 78, 81,104, 108, 117, 121.5, 130, 135, 162, 216, 243, and 270 Mbps Frequency 2.4GHz to 2.5GHz CCK, OFDM, BPSK, QPSK, 16-QAM, 64-QAM ModulationsLED Single LED• Solid indicates connected to network• Blinking indicates transferring dataPower 3.3V bus poweredEmissions FCC Part 15 Class B, CE, C-Tick, VCCI Class B, TELECBus interface Express Card 3.3VProvided drivers Microsoft Vista and Windows XPOperating Environment Operating temperature: 0 to 45 degrees CEncryption 40-bit (also called 64-bit) and 128-bit WEP data encryption, WPA2-PSK, and WPA-PSKWarranty Limited 1-year warranty

B-1v1.0, June 2008Appendix BRelated DocumentsThis appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product.Document LinkUsing Microsoft Vista and Windows XP to Manage Wireless Network Connectionshttp://documentation.netgear.com/reference/enu/winzerocfg/index.htm TCP/IP Networking Basics http://documentation.netgear.com/reference/enu/tcpip/index.htmWireless Networking Basics http://documentation.netgear.com/reference/enu/wireless/index.htmPreparing Your Network http://documentation.netgear.com/reference/enu/wsdhcp/index.htmVirtual Private Networking Basics http://documentation.netgear.com/reference/enu/vpn/index.htmGlossary: http://documentation.netgear.com/reference/enu/glossary/index.htm

NETGEAR RangeMax Wireless-N ExpressCard WN711 User ManualB-2v1.0, June 2008