Netgear orporated 10200131 N300 Wireless Router User Manual

Netgear Incorporated N300 Wireless Router

UserManual.wiki >

Netgear orporated >

10200131 User Manual

User Manual

April 2010208-10641-01v1.0NETGEAR, Inc.350 E. Plumeria Drive San Jose, CA 95134 USAN300 Wireless Router with ReadySHARE Remote WNR2200 Setup Manual

Contents iiiContentsN300 Wireless Router with ReadySHARE Remote WNR2200 Setup Manual Getting to Know Your Wireless Router................................................................................1Unpacking Your New N300 Wireless Router .....................................................................1Hardware Features ............................................................................................................2Front Panel .................................................................................................................. 3Back Panel .................................................................................................................. 5Router Label ................................................................................................................ 5Positioning Your Wireless Router ......................................................................................6Installing Your N300 Wireless Router ................................................................................6Updating Your Router Firmware ........................................................................................7 Installing Your Wireless Router Using Smart Wizard ...........................................................................................................................9 Installing Your Wireless Router Manually (Advanced and Linux Users)........................11Connecting Your N300 Wireless Router ..........................................................................11Verifying Your Connection ...............................................................................................14Setting Up Your Router for Internet Access ....................................................................15 Configuring Your Wireless Network...................................................................................19Accessing Your Router After Installation and Checking for New Firmware .....................19Configuring Your Wireless Settings and Security Options ..............................................20Setting Your SSID and Wireless Security Manually ..................................................20Using Push 'N' Connect (WPS) to Configure Your Wireless Network .......................22Testing Basic Wireless Connectivity ................................................................................23 Troubleshooting................................................................................................................... 27Basic Setup Checklist ......................................................................................................27Checking Basic Router Functions ...................................................................................28Troubleshooting Login Problems .....................................................................................30Checking the Internet Service Connection ......................................................................31Obtaining an Internet IP Address .............................................................................. 31

Contents ivTroubleshooting PPPoE ............................................................................................32Troubleshooting Internet Browsing ...........................................................................33Troubleshooting Connectivity Using the Ping Utility ........................................................33Testing the Path from a PC to Your Router ..............................................................33Testing the Path from a PC to the Internet ................................................................ 34 Technical Specifications .....................................................................................................37Default Configuration Settings .........................................................................................37Restoring the Default Password and Configuration Settings ...........................................40 Related Documents .............................................................................................................41Registration and Certifications............................................................................................43

Getting to Know Your Wireless Router 1Getting to Know Your Wireless RouterCongratulations on your purchase of the NETGEAR® RangeMax™ Dual Band Wireless-N Router WNR2200.Before you begin installing your router, check the package contents (see “Unpacking Your New N300 Wireless Router” on page 1). Become familiar with the front and back panels of your router—especially the LEDs—and the important information on the router label (see “HardwareFeatures” on page 2). Then, read the section on “Positioning Your Wireless Router” on page 6 to ensure that you have selected the best location to install your router. Unpacking Your New N300 Wireless RouterThe product package should contain the following items:• The N300 wireless router• A slide-on stand for your N300 wireless router• An AC power adapter (varies by region)• A yellow Ethernet cable• A stand for the N300 wireless router• NETGEAR Installation Guide• The Resource CD, which includes:– The Smart Wizard™ Installation Assistant (Autorun.exe)– A PDF version of this manual– A link to the online User ManualIf any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair.

Getting to Know Your Wireless Router 2To prepare your router for installation:1. Carefully remove the protective film from the top of your router.2. Set up your N300 wireless router by aligning the arrow on the base with the arrow on the back of the case, and sliding the router onto the base.3. Place your router in an area suitable for installation (near an AC power outlet and accessible to the Ethernet cables for your wired computers).Hardware FeaturesBefore you install and connect your router, take a moment to become familiar with the front and back panels of the router—especially the LEDs on the front panel.Figure 1ResetFactorySettingsbutton

Getting to Know Your Wireless Router 3Front PanelThe front panel has seven status lights that you can use to monitor and verify various conditions. There are also two switch buttons on the right (or at the top if the router is in its stand). The status lights are described in Table 1, and the switch buttons in Table 2.Figure 2Table 1. Status Light Descriptions Item Function Activity Description1. LAN(Ports 1–4)Solid Green The LAN port has detected a 1 Gbps link with an attached device.Blinking Green Data is being transmitted at 1 Gbps.Solid Amber The LAN port has detected a 10/100 Mbps link with an attached device.Blinking Amber Data is being transmitted at 10/100 Mbps.Off No link is detected on this port.2. Internet Off No Ethernet cable is connected to the modem.Solid Amber The Ethernet cable connection to the modem has been detected.Blinking Amber Initializing connection and obtaining an IP address.Solid Green An IP address has been received; ready to transmit data.Blinking Green Data is being transmitted and received.3. USB Off No USB device is connected, or the “Safely Remove Hardware” button has been pressed and it is now safe to remove the attached USB device.Solid Green The USB device has been accepted by the Router and is ready to be used.Fast Blinking GreenThe USB device is in use.123456

Getting to Know Your Wireless Router 4The WLAN and WPS switch buttons toggle the WLAN and WPS functions on and off. 4. Power/Test Solid Amber The unit is starting up after being powered on.Solid Green The unit startup has completed; the unit is ready.Blinking Green Firmware is corrupted. See “Checking Basic Router Functions” on page 28 for instructions on restoring your router firmware.Blinking Amber 1. Firmware is upgrading.2. Restore factory settings button pressed; restoring factory default settings.Off Power is not supplied to the router.Table 2. Switch Button Descriptions Item Function Activity Description5. WLANOn/OffOn Pressing the wireless LAN button turns on the 2.4 GHz and 5 GHz wireless radios, indicated by 2.4 GHz and 5 GHz LEDs being lit.Off The 2.4 GHz and 5 GHz radios are off, and their LEDs are turned off.6. WPSOn/OffOn The WPS function is turned on. The light below the WPS button blinks green when the function is first turned on.Before turning on the WPS button, be sure that the WLAN button is on. If both wireless radios are off (2.4 GHz and 5 GHz LEDs are off), the WPS will not work.Off The WPS function is turned off.For more information on modes, see “Configuring Your Wireless Settings and Security Options” on page 20, and the online Reference Manual, available on the Resource CD.Table 1. Status Light Descriptions (continued)Item Function Activity Description

Getting to Know Your Wireless Router 5Back PanelThe rear panel of the WNR2200 router contains the items in the list that follows the figure.The back of the N300 wireless router includes:1. A USB 2.0 port (backward compatible to USB 1.0/1.1) for attaching a USB storage device2. Four local (LAN) 10/100/1000 Mbps Ethernet ports for connecting the router to local computers.3. An Internet (WAN) 10/100/1000 Mbps Ethernet port for connecting the router to a cable or DSL modem.4. An AC power adapter outlet.5. A Power On/Off button.Router LabelView the label on the bottom of the N300 wireless router to identify the security PIN, serial number, port connectors, status lights, and default login information.Figure 3Figure 4 12345

Getting to Know Your Wireless Router 6Positioning Your Wireless RouterThe N300 wireless router lets you access your network from virtually anywhere within the operating range of your wireless network. However, the operating distance or range of your wireless connection can vary significantly depending on the physical placement of your router. For example, the thickness and number of walls the wireless signal must pass through may limit the range. For best results, place your router: • Near the center of the area where your computers and other devices will operate, preferably within line of sight to your wireless devices.• Accessible to an AC power outlet and near Ethernet cables for wired computers.• In an elevated location such as a high shelf, keeping the number of walls and ceilings between the N300 wireless router and your other devices to a minimum.• Away from electrical devices which are potential sources of interference, such as ceiling fans, home security systems, microwaves, or the base for a cordless phone. • Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and concrete can also affect your wireless signal.Installing Your N300 Wireless RouterTo help you set up your router and get on the Internet quickly, the Resource CD contains a Smart Wizard™. The Smart Wizard walks you through the steps required to connect your router and PC(s); configure your internet settings; configure your wireless settings; and enable wireless security for your network. When you have finished, you will be Internet ready!You can set up your N300 wireless router using one of two methods:•Smart Wizard Setup: The Smart Wizard setup is available on your Resource CD. See “Installing Your Wireless Router Using Smart Wizard” on page 9 to use the Smart Wizard. Failure to follow these guidelines can result in significant performance degradation or an inability to wirelessly connect to the Internet. If you have a Linux system, you need to use the manual installation method (see “Installing Your Wireless Router Manually (Advanced and Linux Users)” on page 11).

Getting to Know Your Wireless Router 7– This is the easiest option. The wizard guides you through the setup process. It automates many of the steps and verifies that the steps have been successfully completed.– Smart Wizard requires a PC running Microsoft Windows.•Manual Setup: If you cannot or prefer not to use the Smart Wizard, see “Installing Your Wireless Router Manually (Advanced and Linux Users)” on page 11. For example, if you are using a Linux operating system or are technically knowledgeable, select this option. If you choose to use this option and install your router manually, for best results, install and set up your router in this order:1. Install and connect your wireless router to your network (see “Connecting Your N300 Wireless Router” on page 11).2. Set up your wireless router for Internet access (see “Setting Up Your Router for Internet Access” on page 15).3. Configure your wireless network and select wireless security settings to protect your wireless network (see “Configuring Your Wireless Network” on page 19).Updating Your Router FirmwareNETGEAR is always improving the operability and features included with your router. To make it easy for you to receive the best, most up-to-date features of your router, NETGEAR provides a variety of methods for updating your product. • The Smart Wizard installation assistant lets you check for and install updates as part of the setup activity.• The router includes an update feature that lets you check for and install updates. You must be logged in to the router to use this feature (see the Reference Manual for details).These options are discussed in “Installing Your Wireless Router Manually (Advanced and Linux Users)” on page 11.Before running the Smart Wizard on a corporate PC to set up your home router, check with your company’s network support staff. Corporate network settings or Virtual Private Network (VPN) client software may conflict with the default settings of a home router. If you are unsure about whether there might be a conflict, use a different computer.

Installing Your Wireless Router Using Smart Wizard 9Installing Your Wireless Router UsingSmart WizardPrepare the following before you set up your router, making sure that: • You are using a computer with either a Mac operating system or a Windows operating system (Windows 7, Windows Vista, Windows 2000, or Windows XP with Service Pack 2 or above).• You have an Internet service connection through an Internet Service Provider (ISP).• Your PC has a wired Ethernet connection (not a wireless connection).• For cable modem service, that you use the computer you first used to set up your Internet service.The NETGEAR Smart Wizard takes you through the procedure to connect your router and PC(s). It then helps you to configure your wireless settings and enable wireless security for your network. The Smart Wizard guides you through the setup and configuration process by automating many of the steps. At each step in the setup process, the Smart Wizard checks to ensure that the steps you perform are successfully completed.The wizard setup process takes about 20 minutes to complete.To set up your router using the Smart Wizard:1. To start the Smart Wizard:• For Windows users,– Insert the Resource CD into your PC. The CD will automatically start and detect the language you are using on your PC. Select a different language option, if you prefer.– In the CD’s menu, click Setup to start the Smart Wizard. •For Mac users, double-click the MacWizard program.2. When the Smart Wizard prompts you to Check for Firmware Updates, click Yes to check the NETGEAR website for new router firmware; or check No to check for updates later (see “Accessing Your Router After Installation and Checking for New Firmware” on page 19).If the CD does not automatically start, browse the CD and double-click on .

Installing Your Wireless Router Using Smart Wizard 103. Follow the instructions and prompts to complete the installation.The Smart Wizard guides you through installing your router, connecting your router to the Internet, configuring your wireless network settings, and selecting the optimum security protection for your network. If you choose not to select a security option during installation, you can always access the router’s user interface later to select a security option (see “SettingYour SSID and Wireless Security Manually” on page 20 or “Using Push 'N' Connect (WPS) to Configure Your Wireless Network” on page 22).At the close of installation: •For Windows users, the Smart Wizard places a Router_Setup.html file on your computer’s desktop so that you can view the router settings. It also places the Router Login shortcut on the desktop for you to access the router’s main menu.•For Mac users, the Smart Wizard places a Router_Setup.pdf file on your desktop.You are now connected to the Internet!After connecting to the Internet, you can:• Log in to the router and check for new firmware. Refer to the bottom label for the default login information, or see the steps in “Accessing Your Router After Installation and Checking for New Firmware” on page 19.• Set up additional wireless computers in your network for Internet access (see “ConfiguringYour Wireless Settings and Security Options” on page 20).For advanced features not covered in this manual, see the Reference Manual on your Resource CD. A link to the online Reference Manual also is available from the router interface.To ensure optimum performance of your high-speed wireless router, the wireless adapter card for each computer in your network should support the same technology as your router (see the online User Manual for more information).The factory default state is restored when you use the restore factory settings button. See “Restoring the Default Password and Configuration Settings” on page 40 for more information about this feature.

Installing Your Wireless Router Manually (Advanced and Linux Users) 11Installing Your Wireless Router Manually(Advanced and Linux Users)Before installing and connecting your router manually, review the list below and make sure that you have all of the necessary information.• Internet ADSL or cable service connection to an Internet Service Provider (ISP).• The configuration information your ISP gave you. Depending on how your Internet account was set up, you might need the following information to set up your N300 wireless router and access the Internet: – Host and Domain Name– Internet Login Name and Password (frequently an email address and password)– Domain Name Server (DNS) Addresses– Fixed or Static IP AddressYour ISP should have provided you with all the information needed to connect to the Internet. If you cannot locate this information, contact your ISP. If you have not already done so:• Check the package contents of your router to ensure that it is complete (see “Unpacking Your New N300 Wireless Router” on page 1”).• Select an optimum location for your N300 wireless router after reviewing the guidelines presented in “Positioning Your Wireless Router” on page 6.”Connecting Your N300 Wireless Router Before you install your N300 wireless router, make sure that the Internet Protocol (TCP/IP) Property settings on your computer are set to “automatically obtain an IP address” using DHCP and “Obtain DNS server address automatically.” You can check these settings by looking at the TCP/IP Properties of your Internal Network Connections, which are accessible through the

Installing Your Wireless Router Manually (Advanced and Linux Users) 12Control Panel of your computer. If you are unsure about this, refer to the documentation for your computer or see the link to TCP/IP Addressing in “Related Documents” on page 41.There are two steps to setting up your N300 wireless router:1. Connect the router to the ADSL or cable modem, and connect a computer to the router.2. Configure the router to use your Internet service. To connect your N300 wireless router:1. Connect the N300 wireless router, the computer, and the modem.a. Turn off your computer.b. Turn off and unplug the cable or ADSL broadband modem. If your modem has a backup battery, remove it as well.c. Locate the Ethernet cable (1) that connects your computer to the modem.2. Disconnect the cable from the modem (2). You will connect it to the router later.3. Locate the Ethernet cable that came with the NETGEAR product. Securely insert that Ethernet cable into your modem and into the Internet port of the N300 wireless router (3).If you are replacing an existing router, disconnect it completely from your network and set it aside before starting to install your new router. Figure 512

Installing Your Wireless Router Manually (Advanced and Linux Users) 134. Locate the cable you removed from the modem in step 2. Securely insert that cable (4) into a LAN port on the router such as LAN port 1.Your network cables are connected, and you are ready to start your network. It is important that you start your network in the correct sequence.To start your network in the correct sequence.Figure 6Figure 7Failure to start or restart your network in the correct sequence could prevent you from accessing the Internet.34

Installing Your Wireless Router Manually (Advanced and Linux Users) 141. First, plug in and turn on the cable or DSL modem (if your modem has a backup battery, plug it back in). Wait 2 minutes.2. Now, plug the power cord into your N300 wireless router and into a power outlet. Wait 1 minute.3. Last, turn on your computer. It might take several minutes for your router to establish a connection with your computer and your Internet provider.Verifying Your ConnectionVerify that your router is connected correctly by checking the wireless router status lights (as illustrated in Figure 8.Check the N300 wireless router status lights to verify the following:•LAN. At least one LAN light (1) should be lit. Green indicates that your computer is communicating at 1 Gbps; amber indicates 10/100 Mbps. If a LAN light is not lit, check that the Ethernet cable from the computer to the router is securely attached at both ends, and that the computer is turned on.•Internet. The Internet port light (2) should be lit. If it is not, make sure that the Ethernet cable is securely attached to the N300 wireless router Internet port and that the modem, and that the modem is powered on.For DSL customers, if software logs you in to the Internet, do not run that software. You might need to go to the Internet Explorer Tools menu, select Internet Options, and then click the Connections tab, where you can select Never dial a connection.Figure 8123456

Installing Your Wireless Router Manually (Advanced and Linux Users) 15•USB. The USB light (3) should be lit if a USB device is connected and ready to be used. The light will be fast blinking green when the USB device is in use.•Power. The Power light (4) should turn solid green. If it does not, see “Checking Basic Router Functions” on page 28.•WLAN On/Off. The Wireless Local Area Network (WLAN) button (5) turns the wireless function on and off.•WPS. The WPS button (6) shows blinking green to indicate WPS activity, when the device is in the 2 minute interval to synchronize security or there is a WPS error.Setting Up Your Router for Internet AccessWhen configuring your wireless router manually, you must log in to your N300 wireless router to set it up initially and to make any changes to your wireless router’s settings later.To access your router:1. Connect to the N300 wireless router by typing http://www.routerlogin.net in the address field of your browser, and then press Enter.The factory default state is reset when you use the Restore Factory Settings button. See “Restoring the Default Password and Configuration Settings” on page 40 for more information.Figure 9Connect to the N300 wireless router by typing any one of these three URLs in the address field of your browser, then pressing Enter:•http://www.routerlogin.net•http://www.routerlogin.com• http://192.168.1.1

Installing Your Wireless Router Manually (Advanced and Linux Users) 16A login window such as the one in the following figure displays:2. For security reasons, the router has its own user name and password. When prompted, enter admin for the router user name and password for the router password, both in lowercase letters.3. A greeting message displays reminding you to use the Firmware Upgrade periodically, and to take advantage of the Wireless-N feature of the router. Click the Close Window button.The Router Upgrade screen will display, asking you to check for a new version of the firmware.4. Click Check to check for new firmware (recommended). The router will automatically check the NETGEAR database for a new firmware image file. If no new firmware version is available, the message “No New Firmware Version Available” will display. (If you select “No,” you can check for new firmware later; see the online User Manual).Figure 10The router user name and password are not the same as any other user name or password you might use to log in to your Internet connection.

Installing Your Wireless Router Manually (Advanced and Linux Users) 175. If new firmware is available, click Yes, and the router will automatically upgrade itself with the latest firmware.6. From the main menu, select Setup Wizard. The Setup Wizard screen displays.7. Select No to set up the connection yourself. Click Next and the Basic Settings screen will display. Enter the required information for your ISP connection in the appropriate fields. If you need assistance, follow the Basic Settings Help screens on the router interface or see the online User Manual for this N300 wireless router. 8. Click Apply to save your settings and complete your connection.You are now connected to the Internet! The N300 wireless router home page will display.To complete your router setup and to configure your wireless network, see “Accessing Your Router After Installation and Checking for New Firmware” on page 19 and “Configuring Your Wireless Settings and Security Options” on page 20.Do not try to go online, turn off the router, shut down the computer, or do anything else to the router until the router finishes restarting and the Ready light has turned solid green for several seconds!Figure 11If you cannot connect to the wireless router, check the Internet Protocol (TCP/IP) properties in the Network Connections section of your Control Panel. It should be set to obtain both IP and DNS server addresses automatically. For assistance, see your computer documentation or see the links in “Related Documents” on page 41.

Installing Your Wireless Router Manually (Advanced and Linux Users) 18If you do not connect successfully: • Review your settings and make sure that you have selected the correct options and typed everything correctly. • Contact your ISP to verify that you have the correct configuration information.• Read “Troubleshooting” on page 27.If problems persist, register your NETGEAR product and contact NETGEAR Technical Support.

Configuring Your Wireless Network 19Configuring Your Wireless NetworkAfter installing your router, you must log into the router to complete your wireless setup. When you log in to the browser, you will be prompted to check for firmware updates from the NETGEAR update server. Accessing Your Router After Installation and Checking for New FirmwareThe Smart Wizard only appears when you run the CD. If you want to change the settings after installing and configuring your router, you can click the desktop shortcut—a pre-configured shortcut placed on your desktop by the Smart Wizard at installation—to open the router management interface.1 You can also change your settings, or configure your wireless and security settings, by opening a browser window and logging in to the router. You will also be prompted to check for new router firmware for the router. To log in to the router after installation:1. Open a browser window and type http://www.routerlogin.net in the address field of your browser. Press Enter.2. When prompted, enter the Password (admin is the default router User Name and password is the default router Password), both in lowercase letters. If you changed the Password from the defaults, then enter your new Password.1. The shortcut icon is installed on your desktop only when using the Smart Wizard installation method.You can enter either of these addresses to connect to your wireless router: http://www.routerlogin.net or http://www.routerlogin.com.The router User Name and Password are unique to the router and are not the same as any other User Name or Password you may use to log in to your Internet connection.

Configuring Your Wireless Network 20Configuring Your Wireless Settings and Security OptionsThe wireless network settings of the router must match the wireless network settings of any wireless devices that connect wirelessly to the router (such as wireless adapter cards and wireless computers).For a wireless connection, the router and each wireless computer must use the same SSID, also called the wireless network name, and the same wireless security. NETGEAR strongly recommends that you use wireless security. The Wireless Settings screen lets you set your wireless network connections and the wireless security option for your network and router. To configure the wireless network, you can either manually specify your network name (SSID) and your wireless security settings (see “SettingYour SSID and Wireless Security Manually” on page 20) or, if the clients in your network are WPS capable, you can use Wi-Fi Protected Setup (WPS) to automatically set the SSID and implement WPA/WPA2 security on both the router and the client device (see “Using Push 'N' Connect (WPS) to Configure Your Wireless Network” on page 22).For a complete overview of all the security configurations that can be implemented on this router, see the online User Manual. A link to the User Manual is on the Resource CD.Setting Your SSID and Wireless Security ManuallyTo specify the wireless settings, you must know the following:• Name (SSID). The default is NETGEAR.• The wireless mode (802.11g/b, or 802.11n) that each wireless adapter supports.Indoors, computers can connect over wireless networks at a range of several hundred feet. This can allow others outside of your immediate area to access your network.If you configure the router from a wireless computer and you change the router’s SSID, channel, or security settings, you will lose your wireless connection when you click Apply. You must then change your computer’s wireless settings to match the router’s new settings. To avoid this situation, you can use a computer that is connected to the router with an Ethernet cable.

Configuring Your Wireless Network 21• Wireless security option. NETGEAR strongly recommends that you use wireless security. To successfully implement wireless security, check each wireless adapter to determine which wireless security option it supports. To set up basic wireless connectivity on your router:1. Log in to the N300 wireless router by going to http://www.routerlogin.net or http://www.routerlogin.com and entering the default user name admin and default password password, or using whatever LAN address and password you have set up.2. Select Wireless Settings under Setup in the main menu to display the Wireless Settings screen.3. Select your region. In the United States, the default region cannot be changed. For the rest of the world, the default region is Europe.4. Leave the wireless mode set to its default setting (you can fine tune the wireless mode later—see the online User Manual).5. Select your wireless Security Option and passphrase (see your online User Manual for a complete explanation of the various security types that are available).6. Click Apply to save your changes.To set up your computers for wireless connectivity:1. Program the wireless settings of each computer or wireless adapter to have the same SSID (wireless network name) as the router.2. Check that the wireless adapter on each computer can support the mode and security option that you selected. (If you have a question, see the online User Manual or review the settings you selected in “Configuring Your Wireless Settings and Security Options” on page 20).3. Check that the security settings on each wireless device match the security settings of the router. For example, if you selected a security option requiring a passphrase, then the same passphrase must be used for each wireless computer.If you are configuring the router from a wireless computer and you change the router’s SSID, channel, or security settings, you will lose your wireless connection when you click Apply. You must then change the wireless settings of your computer to match the router’s new settings.

Configuring Your Wireless Network 224. Check that each wireless computer has a wireless link and is able to obtain an IP address by DHCP from the router. To access the Internet from any computer connected to your N300 wireless router, launch a browser such as Microsoft Internet Explorer or Mozilla Firefox. You should see the N300 wireless router’s Internet LED blink, indicating communication to the ISP.Using Push 'N' Connect (WPS) to Configure Your Wireless NetworkIf your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure the router’s SSID and security settings and, at the same time, connect the wireless client securely and easily to the router. Look for the symbol on your client device.1 WPS automatically configures the SSID and wireless security settings for the router (if the router is in its default state) and broadcasts these settings to the wireless client. If the router has already been configured manually or by using the Smart Wizard, and any of these security options have been enabled (WEP with auto authentication, WPS-PSK, WPA2-PSK, or no security), a wireless client can be added to your network quickly and simply by using Push 'N' Connect. In this case, the existing wireless settings are broadcast to the WPS-capable client. (For more information on setting up a mixed network, see the online User Manual. A link to the UserManual is on the Resource CD.)The following instructions assume that you are configuring WPS on the router for the first time and connecting a WPS-capable device such as a wireless computer or wireless adapter. To connect a device using WPS:1. Open the networking utility of the device you want to connect to that supports WPS. 2. Push the N300 wireless router’s WPS button, then release. The WPS LED will start to blink.For a Windows PC, go to the Control Panel and select Network Connections. Check the Wireless Connections Properties and ensure that TCP/IP Properties are set to Obtain an IP address automatically.1. For a list of other Wi-Fi-certified products available from NETGEAR, go to http://www.wi-fi.org.NETGEAR’s Push 'N' Connect feature is based on the Wi-Fi Protected Setup (WPS) standard. All other Wi-Fi-certified and WPS-capable products should be compatible with NETGEAR products that implement Push 'N' Connect.

Configuring Your Wireless Network 233. While the WPS LED is blinking, you have 2 minutes to enable WPS on the device you are connecting to. The blinking ceases when one of these two conditions occurs:• WPS has enabled security between the router and the other device.The router has generated an SSID, implemented WPA/WPA2 wireless security (including a PSK security password) on the router and has sent this configuration to the wireless client.• If you do not establish a connection using WPS during this 2-minute interval, your router security and SSID (wireless network name) will still be configured for WPA/WPA2 security.The WPS LED will stop blinking or turn off, depending on how you have them configured.4. Note the new SSID and WPA/WPA2 password for the wireless network.To access the Internet from any computer connected to your N300 wireless router, launch a browser such as Microsoft Internet Explorer or Firefox. You should see the N300 wireless router’s Internet LED blink, indicating communication to the ISP.For more information about setting up your wireless network and configuring your wireless security settings, see the User Manual. A link to the online User Manual is on your Resource CD.Testing Basic Wireless ConnectivityOnce you have established basic wireless connectivity and enabled security settings appropriate to your needs, you can test connectivity between devices connected to your router.To test basic wireless connectivity: 1. Log in to the N300 wireless router by going to http://www.routerlogin.net or http://www.routerlogin.com and entering the default user name admin and default password password, or using whatever LAN address and password you have set up.2. Select Wireless Settings from the main menu of the N300 wireless router.If you are planning a mixed network of WPS capable devices and non-WPS capable devices, NETGEAR suggests that you set up your wireless network and security settings manually first, and use WPS only for adding additional WPS capable devices.

Configuring Your Wireless Network 243. Note your SSID name. If you used WPS to establish a connection with other devices, the SSID will now be a randomly selected name. 4. Make sure that you have selected the region in which the wireless router will operate. 5. Leave the wireless mode set to its default setting (you can fine tune the wireless mode later—see the online User Manual).6. Check your wireless security. If you used WPS to enable wireless security, your security will be set to WPA/WPA2 with a randomly-selected PSK security password. 7. Click Apply to save any changes.8. Configure and test your computers for wireless connectivity.Program the wireless adapter of your computers to have the same wireless network name (SSID) as the N300 wireless router and the same wireless security as your N300 wireless router. Check that they have a wireless link and are able to obtain an IP address by DHCP from the router.Your N300 wireless router is now configured to provide Internet access for your network. Your N300 wireless router automatically connects to the Internet when one of your computers requires access. It is not necessary to run a dialer or login application such as Dial-Up Networking or Enternet to connect, log in, or disconnect. These functions are performed automatically by the N300 wireless router as needed.To access the Internet from any computer connected to your N300 wireless router, launch a browser such as Microsoft Internet Explorer or Mozilla Firefox. You should see the N300 wireless router’s Internet LED blink, indicating communication to the ISP. The browser should begin to display a Web page.For more information on setting up your wireless network and configuring your wireless security settings, see the User Manual. A link to the online User Manual is on your Resource CD.The SSID of any wireless adapters or wireless devices connected to your router must match the SSID you configured in the N300 wireless router. If they do not match, you will not get a wireless connection.If you are configuring the router from a wireless computer and you change the router’s SSID, channel, or security settings, you will lose your wireless connection when you click Apply. You must then change the wireless settings of your computer to match the router’s new settings.

Troubleshooting 27TroubleshootingThis chapter gives information about troubleshooting your N300 wireless router. You can find help with the following problems:•“Basic Setup Checklist” on page 27•“Checking Basic Router Functions” on page 28•“Troubleshooting Login Problems” on page 30•“Checking the Internet Service Connection” on page 31•“Testing the Path from a PC to Your Router” on page 33•“Testing the Path from a PC to the Internet” on page 34Basic Setup ChecklistThe following items are the most common errors made when initially setting up a router. Carefully review the checklist to make sure that you have followed the recommended procedures.Be sure to always start your network in this sequence: 1. Turn off and unplug the modem from its power outlet, and turn off the N300 wireless router and computer.2. Turn on the modem, and wait 2 minutes.3. Turn on the N300 wireless router, and wait 1 minute.4. Turn on the computer. Make sure that the Ethernet cables are securely plugged in:1. Verify that the Internet status light on the N300 wireless router is lit if the Ethernet cable to the N300 wireless router from the modem is plugged in securely and the modem and N300 wireless router are both turned on (see “Front Panel” on page 3).2. Verify that for each powered-on computer connected to the N300 wireless router with a securely plugged in Ethernet cable, the corresponding N300 wireless router LAN port status light is lit (see “Front Panel” on page 3). The label on the bottom of the N300 wireless router identifies the number of each LAN port (see “Router Label” on page 5).

Troubleshooting 28Make sure that the network settings of the computer are correct: 1. Verify that your LAN-connected computers are configured to obtain an IP address automatically through DHCP. For help with this, see the documentation for your computer or “Related Documents” on page 41.2. Verify whether the MAC address is needed. Some cable modem services require you to use the MAC address of the computer registered on the account. If this is the case, in the Router MAC Address section of the Basic Settings screen, select Use this Computer’s MAC Address. To save your settings, click Apply. Restart the network in the correct sequence.Check the router status lights to verify correct router operation:If the Power light does not turn solid green within 2 minutes after you turn the router on, reset the router according to the instructions in “Restoring the Default Password and Configuration Settings” on page 40.Checking Basic Router FunctionsAfter you turn on power to the router, check that the following sequence of events has occurred:1. When power is first applied, verify that the Power light is on and that it is solid amber while the router boots up (see “Front Panel” on page 3 for an illustration).2. Verify that the Power light turns amber within a few seconds, indicating that the self-test procedure is running.3. After approximately 90 seconds, verify that:a. The color of the Power light changes to green.b. The LAN port lights are lit for any local ports that are connected.If a port’s light is lit, a link has been established to the connected device. If a LAN port is connected to a 1 Gbps device, verify that the port’s light is green. If the port is 10/100 Mbps, the light will be amber.c. The Internet port is connected and its light is lit.4. If you have enabled WPS security, verify that the WPS button light on the front panel stops blinking and turns off.

Troubleshooting 29If the correct behavior does not occur, check for a remedy from the following table.Table 3. Troubleshooting the router’s LED behavior LED Behavior Recommended ActionPower light is off. See “Connecting Your N300 Wireless Router” on page 11), check the following:• Make sure that the power cord is properly connected to your router and that the power adapter is properly connected to a functioning power outlet.• Check that you are using the power adapter supplied by NETGEAR for this product.If the error persists, you have a hardware problem and should contact technical support.Power light stays amber. When the router is turned on, the Power light turns amber for about 90 seconds and then turns green. If the light does not turn green, the router has a problem.If the Power light is still amber 2 minutes after turning on power to the router:1. Turn the power off and back on to see if the router recovers.2. Clear the router’s configuration to factory defaults. This will set the router’s IP address to 192.168.1.1. This procedure is explained in “Restoring the Default Password and Configuration Settings” on page 40.If the error persists, you might have a hardware problem and should contact technical support.Power light blinks green continuously.The router firmware is corrupted.To restore your firmware:1. Make sure that your PC is connected to your router and the router is powered on.2. Insert the Resource CD that came with your router into your PC.The CD automatically starts and detects the language you are using on your PC. Select a different language option, if you prefer. If the CD does not automatically start, browse the CD and double-click on .3. Click Supporting Software, then Netgear Firmware Recovery Utility, and follow the prompts for the recovery process.4. After firmware recovery is complete, follow the prompts to restore your configuration

Troubleshooting 30For more information on WPS functionality and advanced features, see the online ReferenceManual.Troubleshooting Login ProblemsIf you are unable to log in to the N300 wireless router, check the following:• If you are using an Ethernet-connected computer, check the Ethernet connection between the computer and the router as described in the previous section.• Make sure that you are using the correct login information. The factory default login name is admin, and the password is password. Make sure that Caps Lock is off when you enter this information.• Typically, your computer’s address should be in the range of 255.255.255.0.2 to 255.255.255.0.254. Refer to your computer’s documentation for help with finding your computer’s IP address. Internet light stays amber.When the router is turned on, the Internet light turns amber for about 70 seconds and then turns green. If the light does not turn green, the router has a problem.If the Internet light is still amber 2 minutes after turning on power to the router:1. The Internet is not accessible. Confirm that you have the correct internet setting.2. Clear the router’s configuration to factory defaults. This will set the router’s IP address to 192.168.1.1. This procedure is explained in “Restoring the Default Password and Configuration Settings” on page 40.3. Turn the power off and back on to see if the router recovers.Internet or LAN port lights are off.If either the LAN or Internet lights do not light when the Ethernet connection is made, check the following:1. Make sure that the Ethernet cable connections are secure at the router and at the computer.2. Make sure that power is turned on to the connected computer.3. Be sure you are using Ethernet cables like the cable that was supplied with the N300 wireless router.See “Connecting Your N300 Wireless Router” on page 11 for instructions.If your computer’s IP address is 169.254.x.x, verify that you have a good connection from the computer to the router, and then restart your computer.Table 3. Troubleshooting the router’s LED behavior (continued)

Troubleshooting 31• Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet Explorer, click Refresh to be sure that the Java applet is loaded. Try closing the browser and starting it again.Checking the Internet Service ConnectionIf your router is unable to access the Internet, check that the Internet connection is working, and then check that the N300 wireless router can get an Internet address. Check that the Internet connection is working:1. Internet connection. First verify that your cable or ADSL modem has a successful connection. The cable or ADSL modem status lights indicate if the modem connection is successful or not. Check your modem documentation, or call your Internet Service Provider for help with verifying that the modem has a successful connection. 2. Wireless router Internet light is green or blinking green. If your Internet light is green or blinking green, then you have a good Internet connection, and your wiring is correct.3. Wireless router Internet light blinking amber. If your Internet light is blinking amber, then your N300 wireless router is attempting to make an Internet connection with the service provider. The light should turn green within several minutes. If it does not, check the Internet connection on the modem.4. Wireless router Internet light off. If the Internet light is off, verify that the Ethernet cable is securely connected between the cable or ADSL modem, and that both the modem and N300 wireless router are turned on. Obtaining an Internet IP AddressIf your N300 wireless router is unable to access the Internet, and your Internet light is amber or blinking amber, check the N300 wireless router to see if it is able to get an Internet IP address from your service provider. Unless you have a static IP address, your N300 wireless router automatically requests an IP address from your service provider. To check the Internet IP address from the browser interface: 1. Log in to the N300 wireless router.2. Select Router Status under Maintenance on the main menu to check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your N300 wireless router has not obtained an IP address from your service provider.

Troubleshooting 32If your router is unable to obtain an IP address from the your service provider, the problem might be one of the following:• Your service provider might require a login. Ask your service provider whether they require PPP over Ethernet (PPPoE) login.• The service name, user name, and password might be set incorrectly. See “TroubleshootingPPPoE”.• Your service provider might check for your computer’s host name.Assign the computer host name of your ISP account to the N300 wireless router in the Basic Settings screen.• Your service provider allows only one Ethernet MAC address to connect to Internet, and might check for your computer’s MAC address. In this case, do one of the following:– Inform your service provider that you have bought a new network device, and ask them to use the N300 wireless router’s MAC address.– Configure your router to spoof your computer’s MAC address. This can be done in the Basic Settings screen. Refer to the online help, which you can access from the N300 wireless router main menu.Troubleshooting PPPoE To troubleshoot a PPPoE connection:1. Log in to the N300 wireless router.2. Select Router Status under Maintenance on the main menu.3. Click the Connection Status button.4. If all the steps indicate OK, then your PPPoE connection is up and working.5. If any of the steps indicate Failed, you can attempt to reconnect by clicking Connect. The N300 wireless router will continue to attempt to connect indefinitely.If you cannot connect after several minutes, you might be using an incorrect service name, user name, or password. There also might be a provisioning problem with your ISP.Unless you connect manually, the N300 wireless router will not authenticate using PPPoE until data is transmitted to the network.

Troubleshooting 33Troubleshooting Internet BrowsingIf your N300 wireless router can obtain an IP address but your computer is unable to load any Web pages from the Internet, check the following.• Your computer might not recognize any DNS server addresses. A DNS server is a host on the Internet that translates Internet names (such as www addresses) to numeric IP addresses. Typically your ISP provides the addresses of one or two DNS servers for your use. If you entered a DNS address when you configured the N300 wireless router, restart your computer. Alternatively, you can configure your computer manually with DNS addresses, as explained in the documentation for your computer.• Your computer might not have the N300 wireless router configured as its default gateway.Restart the computer, and verify that the N300 wireless router address (192.168.1.1) is listed by your computer as the default gateway address.Troubleshooting Connectivity Using the Ping UtilityMost computers and routers have a diagnostic utility called ping that sends an request to a target device. The device then replies. The ping utility makes it easy to troubleshoot a network.Testing the Path from a PC to Your RouterYou can ping the N300 wireless router to verify that the LAN path from your computer to your router is set up correctly.The factory default N300 wireless router IP address is 192.168.1.1. However, if the router detects a conflict with the address it gets from your modem, it automatically picks a different address for itself. In this case, you can log in to the router using www.routerlogin.net to verify its LAN IP address. Select LANSetup under Advanced on the main menu. Take note of the LAN TCP/IP setup IP address, which should match the default gateway IP address on your computer.This section includes advanced troubleshooting techniques.

Troubleshooting 34To ping the wireless router:1. From the Windows toolbar, click Start and select Run.2. In the field provided, type Ping followed by the address of the router, as in this example:ping www.routerlogin.netorping 192.168.1.13. Click OK.You should see a message like this one:Pinging 192.168.1.1 with 32 bytes of dataIf the path is working, you see this message:Reply from 192.168.1.1: bytes=32 time=NN ms TTL=xxxIf the path is not working, you see this message:Request timed outIf the path is not functioning correctly, you could have one of the following problems:• Wrong physical connections– Make sure that the LAN port light is on. If the light is off, follow the instructions in “Front Panel” on page 3.– Check that the corresponding lights are on for your computer’s network interface card.• Wrong network configuration– Verify that the Ethernet card driver software and TCP/IP software are both installed and configured on your computer.– Verify that the IP address for your router and your computer are correct and that the addresses on both begin with 255.255.255.0.Testing the Path from a PC to the InternetAfter verifying that the path between your computer and the N300 wireless router works correctly, test the path from your PC to the Internet. From the Windows Start > Run... menu, type:PING -n 10 <IP address>where <IP address> is the IP address of a remote device such as your ISP’s DNS server.

Troubleshooting 35If the path is functioning correctly, replies as in the previous section are displayed. If you do not receive replies:• Check that your PC has the IP address of your router listed as the default gateway. If the IP configuration of your PC is assigned by DHCP, this information is not visible in your PC’s Network Control Panel. Verify that the IP address of the router is listed as the TCP/IP default gateway.• Check to see that the network address of your PC (the portion of the IP address specified by the netmask) is different from the network address of the remote device.• If your ISP assigned a host name to your PC, enter that host name as the account name in the Basic Settings screen.

Technical Specifications 37Technical SpecificationsDefault Configuration SettingsThis section provides factory default settings and technical specifications for the N300 Wireless Router .Table 4. Wireless Router Default Configuration Settings Feature Default SettingSmart Wizard EnabledRouter LoginRouter Login URL http://www. routerlogin.net orhttp://www.routerlogin.comLogin name (case-sensitive) printed on product labeladminLogin password (case-sensitive) printed on product labelpasswordInternet ConnectionWAN MAC address Use default hardware addressMTU Size 1500Local NetworkRouter LAN IP address printed on product label (also known as modem IP address)192.168.1.1Router Subnet 255.255.255.0DHCP Server EnabledTime Zone Greenwich Mean Time (GMT)Time Zone Adjusted for Daylight Saving TimeDisabled

Technical Specifications 38FirewallInbound (communications coming in from the Internet)Disabled (bars all unsolicited requests)Outbound (communications going out to the Internet)Enabled (all)WirelessWireless Communication EnabledName (2.4GHz b/g/n SSID) NETGEARSecurity DisabledBroadcast SSID EnabledCountry/Region Europe11N 2.4GHz Channel AutoOperating Mode Up to 150MbpsaOutput Power Fulla. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.Network Protocol and Standards CompatibilityData and Routing Protocols: TCP/IP, RIP-1, RIP-2, DHCPPPP over Ethernet (PPPoE),Point-to-Point Tunneling Protocol (PPTP)Power AdapterNorth America 120V, 60 Hz, inputUnited Kingdom, Australia 240V, 50 Hz, inputEurope 230V, 50 Hz, inputAll regions (output) 12 V DC @ 1.5A output, 18W maximumTable 4. Wireless Router Default Configuration Settings (continued)Feature Default Setting

Technical Specifications 39Physical SpecificationsDimensions 172.72 x 127.72 x 32.31 mm (6.8 x 5.03 x 1.27 in)Weight 0.27 kg (0.6 lb)Environmental SpecificationsOperating temperature 0q to 40q C (32º to 104º F)Operating humidity 90% maximum relative humidity, noncondensingElectromagnetic EmissionsMeets requirements of: FCC Part 15 Class BEN 55 022 (CISPR 22), Class BC-Tick N10947Interface SpecificationsLAN 10BASE-T, or 100BASE-Tx, RJ-45WAN 10BASE-T, or 100BASE-Tx, RJ-45Wireless Maximum wireless signal rate complies with the IEEE 802.11 standard. Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Radio Data Rates Auto Rate SensingFrequency 2.4 GHzData Encoding StandardsIEEE 802.11n version 2.0IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHzMaximum Computers Per Wireless NetworkLimited by the amount of wireless network traffic generated by each node. Typically 30-70 nodes.Operating Frequency Ranges (2.4GHz) 2.412–2.462 GHz (US) 2.412–2.472 GHz (Europe ETSI)802.11 Security 40-bit (also called 64-bit) and 128-bit WEP, WPA-PSK and WPA2-PSK.Table 4. Wireless Router Default Configuration Settings (continued)Feature Default Setting

Technical Specifications 40Restoring the Default Password and Configuration SettingsYou can restore the factory default configuration settings that reset the router’s user name to admin, the password to password, and the IP address to 192.168.1.1.To restore the factory default configuration settings:1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings button, located on the bottom of the router, for about 5 seconds, until the Power light begins to blink (see “Router Label” on page 5).2. Release the restore factory settings button, and wait for the router to restart, and for the Power light to stop blinking and become solid green. The factory default settings will be restored so that you can access the router from your Web browser using the factory defaults.This procedure will erase all the current configuration settings and restore the factory defaults.

Related Documents 41Related DocumentsThis table provides links to reference documents that you can use to gain a more complete understanding of the technologies used in your NETGEAR product.Table 5. Document LinkTCP/IP Networking Basics http://documentation.netgear.com/reference/enu/tcpip/index.htmPreparing Your Network http://documentation.netgear.com/reference/enu/wsdhcp/index.htmGlossary http://documentation.netgear.com/reference/enu/glossary/index.htm

$43Registration and CertificationsProduct Registration, Support, and Documentation Register your product at http://www.NETGEAR.com/register. You must register before you can use our telephone support service. Product updates and Web support are always available by going to http://www.netgear.com/support.Setup documentation is available on the CD, on the support website, and on the documentation website.When the N300 wireless router is connected to the Internet, click the KnowledgeBase link to view support information, or click the Documentation link to view the online Reference Manual for this N300 wireless router.Maximum Wireless Signal Rate Derived from IEEE Standard 802.11 SpecificationsActual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.Federal Communications Commission (FCC) Compliance Notice: Radio Frequency NoticeThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help. )&&&DXWLRQ$Q\FKDQJHVRUPRGLILFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKHXVHUVDXWKRULW\WRRSHUDWHWKLVHTXLSPHQW7KLVGHYLFHFRPSOLHVZLWK3DUWRIWKH)&&5XOHV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQV7KLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFHDQGWKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ7KLVGHYLFHDQGLWVDQWHQQDVPXVWQRWEHFRORFDWHGRURSHUDWLQJLQFRQMXQFWLRQZLWKDQ\RWKHUDQWHQQDRUWUDQVPLWWHU)RUSURGXFWDYDLODEOHLQWKH86$&DQDGDPDUNHWRQO\FKDQQHOaFDQEHRSHUDWHG6HOHFWLRQRIRWKHUFKDQQHOVLVQRWSRVVLEOH$

Netgear orporated 10200131 N300 Wireless Router User Manual

Netgear Incorporated N300 Wireless Router

User Manual

Navigation menu

Namespaces

Views

Navigation