Netgear orporated 13400249 WiFi USB Adapter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2304144
Application ID	k81B0AET4WTJw0yv9J4MiA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	55.38kB (692188 bits)
Date Submitted	2014-06-24 00:00:00
Date Available	2014-12-21 00:00:00
Creation Date	2017-10-22 07:07:19
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 07:07:19
Document Title	A6210 WiFi USB Adapter 802.11ac Dual Band Installation Guide
Document Creator	FrameMaker 10.0.2
Document Author:	NETGEAR

2. Click the Setup link.
The Software Update Check screen displays.
5. You can use the adapter with or without the desktop dock:
•
Installation Guide
To use the adapter with the desktop dock, place the wireless adapter into
the dock and connect the USB cable to a USB port on your computer.
Note: When placed in the desktop dock, you can fold out the adapter to its
maximum angle for increased WiFi performance.
A6210 WiFi USB Adapter
802.11ac USB 3.0 Dual Band
Package Contents
3. Install the setup software.
You have two options:
Desktop Dock with
USB cable attached
•
•
A6210 WiFi
USB Adapter
Resource CD
Connected to the Internet. If you are connected to the Internet, click
the Check for Updates button. After the software checks for updates,
the Update Check Complete screen displays. Click the Continue button.
The Welcome screen displays.
Not connected to the Internet. If you are not connected to the Internet,
click the Install from CD button. The Welcome screen displays.
•
4. To accept the license agreement, click the I agree radio button and then
click the Next button.
To use the adapter without the desktop dock, insert the adapter into a USB
port on your computer.
A message displays asking you to wait while software is installed. After a
few minutes, NETGEAR genie prompts you to insert your adapter.
Installation
To begin using your A6210 WiFi USB adapter, follow these instructions.
To set up your adapter:
1. Insert the resource CD in your computer CD drive.
Note: If your computer does not have a CD drive, download the A6210
resource CD driver by visiting http://support.netgear.com. Click the Support
for Home Products button and enter A6210 in the search field.
If the Resource CD screen does not display, browse the files on the CD and
double-click Autorun.exe.
The NETGEAR Resource CD screen displays.
6.
Click the Next button.
The NETGEAR genie screen displays a list of wireless networks in your area.
3. When prompted, either place the adapter into the desktop dock and
connect the USB cable to a USB port on your computer, or use the
adapter without the desktop dock and insert the adapter into a USB port on
your computer.
Join a Wireless Network
You can join a wireless network from the NETGEAR genie, or you can use Wi-Fi
Protected Setup (WPS) if your wireless router supports it.
Check Your Connection Status
When you install your adapter, the NETGEAR genie icon displays in the Windows
system tray and on the desktop. You can double-click this icon to open NETGEAR
genie to make changes or connect to a different wireless network. The color of the
icon indicates the strength of your wireless connection:
White. 3–5 bars (strong connection)
Yellow. 1–2 bars (weak connection)
To join a network using NETGEAR genie:
1.
2.
3.
4.
Standalone Driver Installation
Red. 0 (zero) bars (no connection)
From the NETGEAR genie screen, click the Join a Network button.
Select your wireless network.
Click the Connect button.
If the network is secure, enter its password or network key.
The adapter joins the network, which can take a few minutes. Your settings
are saved in a profile.
If you remove your adapter, NETGEAR genie is not available, so the icon does
not display. When you insert the adapter again, the icon returns.
Support
Thank you for selecting NETGEAR products.
To join a network using WPS:
After installing your device, locate the serial number on the label of your product
and use it to register your product at https://my.netgear.com.
1. Press and hold the WPS button on the adapter for two seconds.
2. Within two minutes, press the WPS button on your wireless router or
gateway.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR website.
For product updates and web support, visit http://support.netgear.com.
To install a standalone driver:
1. Insert the resource CD in your computer CD drive.
Note: If your computer does not have a CD drive, download the A6210
resource CD driver by visiting http://support.netgear.com. Click the Support
for Home Products button and enter A6210 in the search field.
If the Resource CD screen does not display, browse the files on the CD and
double-click Autorun.exe.
NETGEAR recommends that you use only the official NETGEAR support
resources.
The NETGEAR Resource CD screen displays.
You can get the user manual online at http://downloadcenter.netgear.com or
through a link in the product’s user interface.
2. Click the Install Windows Standalone Driver link.
The driver installs on your computer.
WPS button
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks
of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject
to change without notice. © NETGEAR, Inc. All rights reserved.
BETA DOCUMENT
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
January 2014
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory.
See the regulatory compliance document before connecting the adapter.
The adapter joins the network, which can take a few minutes. Your settings
are saved in a profile.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Author                          : NETGEAR
Create Date                     : 2014:01:09 16:39:37Z
Keywords                        : A6210, WiFi, USB, Adapter, 802.11ac, USB, 3.0, Dual, Band, Installation, Guide
Modify Date                     : 2014:06:06 10:27:49+08:00
Language                        : en
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : NETGEAR
Description                     : A6210 WiFi USB Adapter 802.11ac Dual Band Installation Guide
Title                           : A6210 WiFi USB Adapter 802.11ac Dual Band Installation Guide
Subject                         : A6210 WiFi USB Adapter 802.11ac USB 3.0 Dual Band Installation Guide
Rights                          : 2014
Creator Tool                    : FrameMaker 10.0.2
Metadata Date                   : 2014:06:06 10:27:49+08:00
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:a36f6dd8-1372-46c8-8c75-9a4772331ab7
Instance ID                     : uuid:e255e938-9f11-4201-8a9e-85ec6964a576
Marked                          : True
Copyright                       : 2014
Page Mode                       : UseNone
Page Count                      : 2

EXIF Metadata provided by EXIF.tools