Netgear orporated 14200267 AC1200 WiFi DSL Modem Router User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	2311276
Application ID	DgU95Umab8TKJA5h0iLusw==
Document Description	User Manual2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	55.12kB (689032 bits)
Date Submitted	2014-06-30 00:00:00
Date Available	2014-12-28 00:00:00
Creation Date	2017-10-22 05:00:51
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 05:00:51
Document Title	AC1200 WiFI DSL Modem Router Model D6200v2 Installation Guide
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	NETGEAR

Installation
1. Connect the modem router to a DSL
service or a cable or iber modem.
3. Check the DSL or Internet LED.
If the modem router is connected to a DSL
lights green.
service, the DSL LED
To connect the modem router to a DSL
service:
AC1200 WiFi DSL Modem Router
Model D6200v2
Package Contents
a. Install the ADSL microilter between
the phone line and the phone.
b. Use the phone cable to connect the
microilter to the ADSL port on the
modem router.
For additional information about connecting
to a DSL service, see the other side of this
installation guide.
to light blue.
4. Wait for the WiFi LED
If the WiFi LED does not light, press the
WiFi On/Of button
DSL Internet
ADSL
microilter
Ethernet cable
Ethernet cable
WPS
Phone cable
To connect the modem router to a
cable or iber modem:
Use an Ethernet cable to connect the cable
or iber modem to the red Internet port on
the modem router.
Phone cable
Modem router
Cable or iber
Internet
You can also use WiFi to connect. To
connect with WiFi, use the WiFi network
name and password on the product label.
6. Log in to the modem router.
Launch a web browser.
Modem router
Power adapter
5. Connect a computer.
Use an Ethernet cable to connect your
computer to a yellow Ethernet port on the
modem router.
ADSL microilter
Get the genie App
The free NETGEAR genie app lets you easily monitor, connect, and
control your home network from a Windows or Mac computer, tablet, or
smartphone. You can share and stream music or videos, diagnose and repair
network issues, set up parental controls, and more.
Download the free genie app from www.NETGEAR.com/genie.
NETGEAR genie displays.
2. Power on the modem router.
Connect the power adapter to the
modem router and plug the adapter into an
electrical outlet.
to light green.
Wait for the Power LED
If the Power LED does not light, press the
Power On/Of button.
Cable or iber modem
Power adapter
If you do not see genie, enter
www.routerlogin.net in the address ield
of the web browser. When prompted, enter
admin for the user name and password
for the password.
NETGEAR genie determines your Internet
connection. If the modem router
successfully connects to the Internet, the
lights green.
Internet LED
Additional Information for DSL Service
Join the Modem Router’s WiFi Network
WiFi Network Name and Password
Make sure that your DSL service is active before you install the modem
router. You need the following information to install your DSL modem and
connect to the Internet:
To connect your computer or WiFi device (such as a smartphone or gaming
device) to your modem router’s WiFi network, you can use either the
manual method or Wi-Fi Protected Setup (WPS) method.
•
Manual Method
This product has a unique WiFi network name (SSID) and network key
(password). The default SSID and password are uniquely generated for every
device, like a serial number, to protect and maximize your wireless security. This
information is on the product label.
•
DSL user name and password. This information is included in the
welcome letter your DSL Internet service provider (ISP) sent you when
you signed up for your service.
Your telephone number or DSL account number. If you do not have
voice service, you can use your DSL account number instead.
If you do not know or cannot locate your DSL user name and password, call
your DSL ISP. The following table lists the contact information for some of
the primary DSL ISPs.
1. Open the sotware utility that manages your WiFi connections on
the computer or WiFi device that you want to connect to your
modem router.
This utility scans for all wireless networks in your area.
2. Find and select your modem router’s WiFi network name (SSID).
The SSID is on the product label.
3. Enter the modem router’s password (or your custom password if you
changed it) and click the Connect button.
The password is on the product label.
DSL ISP
Phone Number
AT&T DSL (not AT&T U-Verse)
877-722-3755
AT&T/BellSouth DSL (not AT&T U-Verse)
888-321-237
4. Repeat Step 1 through Step 3 to add other computers or WiFi devices.
CenturyLink
800-809-1410
WPS Method
Covad DSL
888-642-6823
EarthLink
888-829-8466
Qwest
800-247-7285
SureWest
888-639-1611
If your computer or WiFi device supports WPS, you can use WPS to join
the modem router’s WiFi network. For help with the WPS button on your
computer or WiFi device, check the instructions or online help that came
with that computer or WiFi device. Some older equipment cannot use WPS.
TDS DSL Support
866-571-6662
US Family
800-300-4256
Verizon
800-567-6789
Windstream
877-901-4692
Note: WPS does not support WEP security. If you are using WEP security,
use the manual method.
Note: If your provider says that they do not support NETGEAR services,
tell them that you need only your DSL user name and password; you do not
need support.
April 2014
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
on the modem router.
1. Press the WPS button
2. Within two minutes, on your computer or WiFi device, press its WPS
button or click its onscreen WPS button.
The computer or WiFi device connects to your modem router.
3. Repeat this process to add other computers or WiFi devices.
NETGEAR recommends that you use the preset WiFi settings because you can
check the product label if you forget them. NETGEAR genie lets you change
these setting. If you do so, write down the new WiFi settings and store them in
a safe place.
Support
Thank you for purchasing this NETGEAR product.
Ater installing your device, locate the serial number on the label of your
product and use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone
support. NETGEAR recommends registering your product through the NETGEAR
website.
For product updates and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the oicial NETGEAR support
resources.
You can get the user manual online at http://downloadcenter.netgear.com or
through a link in the product’s user interface.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Author                          : NETGEAR
Create Date                     : 2014:04:23 18:21:31-07:00
Keywords                        : AC1200, WiFI, DSL, Modem, Router, Model, D6200v2, Installation, Guide
Modify Date                     : 2014:06:26 11:56:07+08:00
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : AC1200 WiFI DSL Modem Router Model D6200v2 Installation Guide
Creator                         : NETGEAR
Description                     : AC1200 WiFI DSL Modem Router Model D6200v2 Installation Guide
Subject                         : AC1200 WiFI DSL Modem Router Model D6200v2 Installation Guide
Metadata Date                   : 2014:06:26 11:56:07+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:3f11ea3a-c10f-4ad9-abea-15ac58b5e009
Original Document ID            : xmp.did:3B18FFCDA68EE3118389E3E3D5749344
Document ID                     : xmp.id:DA16B26F4DCBE3118203FE5B93F4AEB2
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:214AE8143DCBE3118203FE5B93F4AEB2
Derived From Document ID        : xmp.did:006DEADD35BCE311A3F0AB842B648120
Derived From Original Document ID: xmp.did:3B18FFCDA68EE3118389E3E3D5749344
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2014:04:23 18:21:32-07:00
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools