Netgear orporated 14300292 Wireless Cable Gateway User Manual rev
Netgear Incorporated Wireless Cable Gateway rev
User Manual rev.pdf
802.11ac DOCSIS® 3.0 Wireless Gateway Series
The NETGEAR Difference
Benefits
Features
Whole Home System
Overview
The NETGEAR® C6250 802.11ac DOCSIS 3.0
Wireless Gateway Series gateway delivers next
generation Wi-Fi at Gigabit speeds.
By integrating beamforming into the C6250 802.11ac
DOCSIS 3.0 Wireless Gateway, operators can
experience significant value and benefits. Enhanced
performance and a more stable connection can help
reduce the number of support calls that operators
receive related to Wi-Fi connectivity and performance.
Service providers’ customers may experience increased
levels of customer satisfaction with the reduction of
dead zones and performance variation due to device
orientation. For mobile devices incorporating 802.11ac,
this will result in increased throughput for faster
downloads and better video streaming experience.
Service providers will find the addition of beamforming
to be exceptionally helpful as more and more mobile
devices incorporating 802.11ac become available.
Additionally, standard-based implementation can help
ensure interoperability with a wide variety of 802.11ac
client devices.
The C6250 802.11ac DOCSIS 3.0 Wireless Gateway
utilizes simultaneous dual-band Wi-Fi technology to
enable speeds up to 300+1300 Mbps (300 Mbps at
11n and 1300 Mbps at 11ac). This makes it ideal for
larger homes with multiple devices.
• Improved Wi-Fi range and
performance with Beamforming
• Up to three times faster than
802.11n
• Up to 16 times faster than DOCSIS/
Euro-DOCSIS 2.0
• HD video streaming through the
home
• Compatible with next generation Wi-
Fi devices
• Backward compatible with 802.11n
• WAN speeds of up to 800 Mbps
(V2 with 16x4 and in Euro-DOCSIS
mode)
• DOCSIS 3.0/Euro-DOCSIS 3.0 –
16x4 or 8x4 full band capture
• 11ac next generation Wi-Fi at Gigabit
speeds
• NETGEAR genie® app for computers,
tablets and smartphones
• Enhanced support tools
• TR069, SNMP remote management
• Hotspot/Wi-Fi offload support using
GRE soft tunneling
C6250
Internet Service
Provider Connection
DOCSIS 3.0
Wireless Gateway
Desktop, Laptop
Computer, Tablet or
Smartphone
Data Sheet - Preliminary
NETGEAR and the NETGEAR logo are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/
or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s).
Information is subject to change without notice.
© 2013 NETGEAR, Inc. All rights reserved.
Data Sheet
802.11ac DOCSIS 3.0 Wireless Gateway Series
C6250
D-C6250-1
Technical Specifications
Physical Interfaces
• WAN – 16x4 channel-bonding
with full-band capture technology
(WAN speeds)
• LAN – 4 GigE ports; optional 1 G
WAN port
• Wi-Fi – AC1600 2x2 – 2.4 GHz
and 3x3 11ac 5GHz
Wi-Fi
• 3x3 11ac with Beamforming
• Wi-Fi Power On/Off
Ease-of-use
• Easy install
• Push ‘N’ Connect
Advanced Features
• Parental controls
• DLNA
• ReadySHARE® USB access
• NETGEAR genie® application
• TR069 remote management
• Hotspot for wireless off-load
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 24 cm between the radiator & your body.
Note: The country code selection is for non-US model only and is not
available to all US model. Per FCC regulation, all WiFi product marketed in
US must fixed to US operation channels only.