Netgear orporated 16100338 Arlo Q Plus User Manual Arlo Quick Start Guide

Netgear Incorporated Arlo Q Plus Arlo Quick Start Guide

User Manual.pdf

Download: Netgear orporated 16100338 Arlo Q Plus User Manual Arlo Quick Start Guide
Mirror Download [FCC.gov]Netgear orporated 16100338 Arlo Q Plus User Manual Arlo Quick Start Guide
Document ID2972977
Application IDvRgAHodMSLNGXK6I6sm7hQ==
Document DescriptionUser Manual.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize135.84kB (1697956 bits)
Date Submitted2016-04-27 00:00:00
Date Available2016-10-24 00:00:00
Creation Date2015-09-24 13:18:09
Producing SoftwareAdobe PDF Library 10.0.1
Document Lastmod2016-04-19 15:26:21
Document TitleArlo Quick Start Guide
Document CreatorAdobe InDesign CS6 (Windows)
Document Author: NETGEAR

Quick Start Guide
Welcome
Thank you for choosing Arlo.
Getting started is easy.
What’s Included
Plug In Your Camera
Connect one end of the USB cable to the port on the camera.
Plug the other end of the USB cable into the adapter.
Plug the USB adapter into a wall socket and wait for the
camera LED to blink amber.
USB cable
Arlo Q camera
USB power
adapter
TOP
Wall-mount
plate
4 Mounting
screws
2
Get the App
For the best experience, download the Arlo app for your
smartphone by scanning the QR code below or searching for
“Arlo” in the app store.
Get a New Account
Already have an account? See Add Devices to an Existing
Account on page 8.
Launch the app from
your smartphone and
tap the New System
Setup button. Follow the
onscreen instructions.
Or from a computer, visit
https://arlo.netgear.com/#/login
and click the New System Setup
button. Select Arlo Q.
https://arlo.netgear.com
Add Devices to an Existing Account
Launch the Arlo app and log in to your account.
Tap the Add Device button, select Arlo Q, and follow the onscreen
instructions.
Connect Your Camera
Follow the onscreen instructions from either the Arlo app or from
a computer to connect your camera directly to your WiFi router.
Note: If you own an Arlo wire-free system, do not connect your
Arlo Q camera to the Arlo base station.
5
Place or Mount Your Camera
You can place your camera on a shelf or other flat surface, or
you can mount it on the wall.
If you are mounting the camera on a wall, place the wall plate
and secure it in place with four screws.
Slide the camera into the wall plate.
Note: The camera base includes a magnet that can help position a
camera on a metal surface.
10
11
You’re Done!
Congratulations! Your Arlo camera is set up and ready to go.
To view useful tutorial videos, find troubleshooting tips, or get support,
visit http://support.arlo.com.
Camera LED Guide
Solid amber
The camera is
booting up.
Solid blue
The camera is
powered on and is
connected to Arlo
servers.
Solid purple
The camera is
connected to a WiFi
network however it
is not connected to
the Internet.
Slow blinking
amber
The camera is
powered on and is
ready for setup.
Slow blinking
blue
The camera is
connecting to a
WiFi network.
Blinking purple
The camera is too
far away from the
router.
Fast blinking
amber
The camera is not
connected to a
WiFi network yet.
Fast blinking
blue
The camera is
connecting to Arlo
servers.
Blinking blue/
amber
A firmware update
is in progress. DO
NOT TURN OFF THE
CAMERA.
Off
The camera is
powered off.
12
13
Notes
14
Notes
15
©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and
Arlo are trademarks of NETGEAR, Inc.
Compliance
For the current EU Declaration of Conformity, visit
http://kb.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
350 East Plumeria Drive
San Jose, CA 95134, USA
September 2015
16
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Industry Canada statement:
Thisdevice
device complies
complies with
with RSS-247
of the Industry RSSs.
Canada
Rules. Operation
is to the
This
ISED's licence-exempt
Operation
is subject
following
(1)conditions:
This device(1)
may
cause
harmful
interference, and
subject totwo
theconditions:
following two
Thisnot
device
may
not cause
(2)
this device
must accept
any
interference
including
interference that
harmful
interference,
and (2)
this
device mustreceived,
accept any
interference
may
causeincluding
undesired
operation.that may cause undesired operation.
received,
interference
Le
appareil
est conforme
auxCNR-247d'Industrie
CNR d' ISED applicables
appareils radio
Ceprésent
dispositif
est conforme
à la norme
Canadaaux
applicable
exempts
de licence.
L'exploitation
est autorisée
aux deux conditions
suivantes :
aux appareils
radio exempts
de licence.
Son fonctionnement
est sujet aux
(1)
le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif
deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
doit accepter tout brouillage reçu, y compris un brouillage susceptible de
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y
provoquer un fonctionnement indésirable.
compris un brouillage susceptible de provoquer un fonctionnement
Caution :
(i)indésirable.
the device for operation in the band 5150-5250 MHz is only for indoor use to
Caution
: potential for harmful interference to co-channel mobile satellite
reduce the
(i) the device for operation in the band 5150-5250 MHz is only for indoor use
systems;
to the
reduce
the potential
for gain
harmful
interference
to co-channel
mobile
(ii)
maximum
antenna
permitted
for devices
in the bands
5250-5350
satellite
MHz
and systems;
5470-5725 MHz shall be such that the equipment still complies with the
(ii) high-power
e.i.r.p.
limit; radars are allocated as primary users (i.e. priority users) of
(iii)
maximum
antenna
gain
permitted
forand
devices
in theradars
band could
5725-5850 MHz
thethe
bands
5250-5350
MHz and
5650-5850
MHz
that these
shall
beinterference
such that the
equipment
complies
with the e.i.r.p. limits specified for
cause
and/or
damagestill
to LE-LAN
devices.
point-to-point
and non-point-to-point operation as appropriate; and
Avertissement:
(iv)
worst-case
tilt angle(s)
remain
with the e.i.r.p.
les the
dispositifs
fonctionnant
dansnecessary
la bande 5to150-5
250compliant
MHz sont réservés
elevation
mask
requirement
set àforth
in Section
6.2.2(3)
shall
clearly
uniquement
pour
une utilisation
l’intérieur
afin de
réduire
les be
risques
de indicated.
(v)
Users should also be advised that high-power radars are allocated as primary
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and
mêmes canaux;
that these radars could cause interference and/or damage to LE-LAN devices.
(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de
Avertissement:
radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.,
Le
guide d'utilisation des dispositifs pour réseaux locaux doit inclure des
qu’ils
ont la précises
priorité) sur
pourles
lesrestrictions
bandes 5 250-5
350 MHz et 5 650-5
850 MHz
instructions
susmentionnées,
notamment
: et
radars pourraient
causer
du la
brouillage
et/ou des dommages
aux
(i)que
lesces
dispositifs
fonctionnant
dans
bande 5150-5250
MHz sont réservés
dispositifs LAN-EL.
uniquement
pour une utilisation à l'intérieur afin de réduire les risques de
Radiation préjudiciable
Exposure Statement:
brouillage
aux systèmes de satellites mobiles utilisant les mêmes
This equipment complies with IC radiation exposure limits set forth for an
canaux;
(ii)
le gain maximal
d'antenne
pourshould
les dispositifs
utilisant
les bandes de
uncontrolled
environment.
Thispermis
equipment
be installed
and operated
5250
5 350 MHz
et de20cm
5470between
à 5725 MHz
doit être&conforme
with àminimum
distance
the radiator
your body.à la limite de la p.i.
r.e;
(iii)
le gain maximal
d'antenne
permis (pour les dispositifs utilisant la bande de 5
Déclaration
d'exposition
aux radiations:
725
5 850 MHz)est
doit
être conforme
à lad'exposition
limite de laaux
p.i.r.e.
spécifiée pour
Cet àéquipement
conforme
aux limites
rayonnements
IC
l'exploitation
point
à
point
et
l'exploitation
non
point
à
point,
selon
le
cas;
établies pour un environnement non contrôlé. Cet équipement doit être
(iv) les pires angles d'inclinaison nécessaires pour rester conforme à l'exigence de
installé et utilisé avec un minimum de 20 cm de distance entre la source de
la p.i.r.e. applicable au masque d'élévation, et énoncée à la section 6.2.2 3),
rayonnement et votre corps.
doivent être clairement indiqués.
(v) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de
radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont
la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars
pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements
ISED établies pour un environnement non contrôlé. Cet équipement doit
être installé et utilisé avec un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The
following test methods have been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC:
EN60950-1:2006+A11:2009+A11:2009+A1:2010+A12:2011+A2:2013
EN60950-1/A12:2011+A2:2013
Safety of Information Technology Equipment
EN 62311:2008
Assessment of electronic and electrical equipment related to human exposure restrictions
for electromagnetic fields (0 Hz-300 GHz) (IEC 62311:2007 (Modified))
EN 300 328 V1.9.1:2015
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission
systems; Data transmission equipment operating in the 2.4GHz ISM band andusing wide
band modulation techniques; Harmonized EN covering the essential requirements of article
3.2 of the R&TTE Directive
EN 301 893 V1.8.1:2015
Broadband Radio Access Networks (BRAN); 5GHz high performance RLAN; Harmonized EN
covering the essential requirements of article 3.2 of the R&TTE Directive
EN 301 489-1 V1.9.2:2011
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical
requirements
EN 301 489-17 V2.2.1:2012
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for
Broadband Data Transmission Systems
Česky
[Czech]
Dansk
[Danish]
Deutsch
[German]
[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími
příslušnými ustanoveními směrnice 1999/5/ES.
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse]
overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG
befindet.
Eesti
[Estonian]
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment]
vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele
sätetele.
English
Hereby, [NETGEAR, Inc.], declares that this [Arlo Q] is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Español
[Spanish]
Ελληνική
[Greek]
Français
[French]
Italiano
[Italian]
Latviski
[Latvian]
Lietuvių
[Lithuanian]
Nederlands
[Dutch]
Malti
[Maltese]
Magyar
[Hungarian]
Polski
[Polish]
Português
[Portuguese]
Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Finnish]
Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips]
atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet
essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és
az 1999/5/EC irányelv egyéb elõírásainak.
Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e
outras disposições da Directiva 1999/5/CE.
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen
laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Svenska
[Swedish]
Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Title                           : Arlo Quick Start Guide
Creator                         : NETGEAR
Description                     : Arlo Q Powered Camera Quick Start Guide
Subject                         : Arlo, powered camera, QSG, VMC3040
Create Date                     : 2015:09:24 13:18:09-07:00
Metadata Date                   : 2016:04:19 15:26:21+08:00
Modify Date                     : 2016:04:19 15:26:21+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:d739b8be-95de-4787-941c-c40092521036
Original Document ID            : xmp.did:F97F11740720681180838502DEE94D73
Document ID                     : xmp.id:3CA5D158F962E511AE6DB6CF4A90F315
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:3BA5D158F962E511AE6DB6CF4A90F315
Derived From Document ID        : xmp.did:B78154CAD762E51182B5E4C621EC93D6
Derived From Original Document ID: xmp.did:F97F11740720681180838502DEE94D73
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:09:24 13:18:09-07:00
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Has XFA                         : No
Page Count                      : 14
Author                          : NETGEAR
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PY316100338

Navigation menu